blob: 9baaaac8a8ada393ffbdd21e5ed967ccdc82d494 [file] [log] [blame]
wdenk3a473b22004-01-03 00:43:19 +00001/*
2 * (C) Copyright 2001
3 * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
4 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02005 * SPDX-License-Identifier: GPL-2.0+
wdenk3a473b22004-01-03 00:43:19 +00006 *
7 * modifications for the DB64460 eval board based by Ingo.Assmus@keymile.com
8 */
9
10/*
11 * db64460.c - main board support/init for the Galileo Eval board.
12 */
13
14#include <common.h>
15#include <74xx_7xx.h>
16#include "../include/memory.h"
17#include "../include/pci.h"
18#include "../include/mv_gen_reg.h"
19#include <net.h>
Ben Warren10efa022008-08-31 20:37:00 -070020#include <netdev.h>
Wolfgang Denk774b3572011-11-29 22:17:49 +000021#include <linux/compiler.h>
wdenk3a473b22004-01-03 00:43:19 +000022
23#include "eth.h"
24#include "mpsc.h"
25#include "i2c.h"
26#include "64460.h"
27#include "mv_regs.h"
28
29#undef DEBUG
30/*#define DEBUG */
31
32#define MAP_PCI
33
34#ifdef DEBUG
35#define DP(x) x
36#else
37#define DP(x)
38#endif
39
wdenk3a473b22004-01-03 00:43:19 +000040/* ------------------------------------------------------------------------- */
41
42/* this is the current GT register space location */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020043/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */
wdenk3a473b22004-01-03 00:43:19 +000044
45/* Unfortunately, we cant change it while we are in flash, so we initialize it
46 * to the "final" value. This means that any debug_led calls before
wdenkc837dcb2004-01-20 23:12:12 +000047 * board_early_init_f wont work right (like in cpu_init_f).
wdenk3a473b22004-01-03 00:43:19 +000048 * See also my_remap_gt_regs below. (NTL)
49 */
50
51void board_prebootm_init (void);
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020052unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
wdenk3a473b22004-01-03 00:43:19 +000053int display_mem_map (void);
54
55/* ------------------------------------------------------------------------- */
56
57/*
58 * This is a version of the GT register space remapping function that
59 * doesn't touch globals (meaning, it's ok to run from flash.)
60 *
61 * Unfortunately, this has the side effect that a writable
62 * INTERNAL_REG_BASE_ADDR is impossible. Oh well.
63 */
64
65void my_remap_gt_regs (u32 cur_loc, u32 new_loc)
66{
67 u32 temp;
68
69 /* check and see if it's already moved */
70
71/* original ppcboot 1.1.6 source
72
73 temp = in_le32((u32 *)(new_loc + INTERNAL_SPACE_DECODE));
74 if ((temp & 0xffff) == new_loc >> 20)
75 return;
76
77 temp = (in_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE)) &
78 0xffff0000) | (new_loc >> 20);
79
80 out_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE), temp);
81
82 while (GTREGREAD(INTERNAL_SPACE_DECODE) != temp);
83original ppcboot 1.1.6 source end */
84
85 temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
86 if ((temp & 0xffff) == new_loc >> 16)
87 return;
88
89 temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
90 0xffff0000) | (new_loc >> 16);
91
92 out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
93
94 while (GTREGREAD (INTERNAL_SPACE_DECODE) != temp);
95}
96
97#ifdef CONFIG_PCI
98
99static void gt_pci_config (void)
100{
101 unsigned int stat;
102 unsigned int val = 0x00fff864; /* DINK32: BusNum 23:16, DevNum 15:11, FuncNum 10:8, RegNum 7:2 */
103
104 /* In PCIX mode devices provide their own bus and device numbers. We query the Discovery II's
105 * config registers by writing ones to the bus and device.
106 * We then update the Virtual register with the correct value for the bus and device.
107 */
108 if ((GTREGREAD (PCI_0_MODE) & (BIT4 | BIT5)) != 0) { /*if PCI-X */
109 GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
110
111 GT_REG_READ (PCI_0_CONFIG_DATA_VIRTUAL_REG, &stat);
112
113 GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
114 GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200115 (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
wdenk3a473b22004-01-03 00:43:19 +0000116
117 }
118 if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) { /*if PCI-X */
119 GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
120 GT_REG_READ (PCI_1_CONFIG_DATA_VIRTUAL_REG, &stat);
121
122 GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
123 GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200124 (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
wdenk3a473b22004-01-03 00:43:19 +0000125 }
126
127 /* Enable master */
128 PCI_MASTER_ENABLE (0, SELF);
129 PCI_MASTER_ENABLE (1, SELF);
130
131 /* Enable PCI0/1 Mem0 and IO 0 disable all others */
132 GT_REG_READ (BASE_ADDR_ENABLE, &stat);
133 stat |= (1 << 11) | (1 << 12) | (1 << 13) | (1 << 16) | (1 << 17) | (1
134 <<
135 18);
136 stat &= ~((1 << 9) | (1 << 10) | (1 << 14) | (1 << 15));
137 GT_REG_WRITE (BASE_ADDR_ENABLE, stat);
138
139 /* ronen- add write to pci remap registers for 64460.
140 in 64360 when writing to pci base go and overide remap automaticaly,
141 in 64460 it doesn't */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200142 GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CONFIG_SYS_PCI0_IO_BASE >> 16);
143 GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CONFIG_SYS_PCI0_IO_BASE >> 16);
144 GT_REG_WRITE (PCI_0_IO_SIZE, (CONFIG_SYS_PCI0_IO_SIZE - 1) >> 16);
wdenk3a473b22004-01-03 00:43:19 +0000145
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200146 GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI0_MEM_BASE >> 16);
147 GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI0_MEM_BASE >> 16);
148 GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CONFIG_SYS_PCI0_MEM_SIZE - 1) >> 16);
wdenk3a473b22004-01-03 00:43:19 +0000149
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200150 GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CONFIG_SYS_PCI1_IO_BASE >> 16);
151 GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CONFIG_SYS_PCI1_IO_BASE >> 16);
152 GT_REG_WRITE (PCI_1_IO_SIZE, (CONFIG_SYS_PCI1_IO_SIZE - 1) >> 16);
wdenk3a473b22004-01-03 00:43:19 +0000153
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200154 GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI1_MEM_BASE >> 16);
155 GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI1_MEM_BASE >> 16);
156 GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CONFIG_SYS_PCI1_MEM_SIZE - 1) >> 16);
wdenk3a473b22004-01-03 00:43:19 +0000157
158 /* PCI interface settings */
159 /* Timeout set to retry forever */
160 GT_REG_WRITE (PCI_0TIMEOUT_RETRY, 0x0);
161 GT_REG_WRITE (PCI_1TIMEOUT_RETRY, 0x0);
162
163 /* ronen - enable only CS0 and Internal reg!! */
164 GT_REG_WRITE (PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
165 GT_REG_WRITE (PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
166
167/*ronen update the pci internal registers base address.*/
168#ifdef MAP_PCI
169 for (stat = 0; stat <= PCI_HOST1; stat++)
170 pciWriteConfigReg (stat,
171 PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200172 SELF, CONFIG_SYS_GT_REGS);
wdenk3a473b22004-01-03 00:43:19 +0000173#endif
174
175}
176#endif
177
178/* Setup CPU interface paramaters */
179static void gt_cpu_config (void)
180{
181 cpu_t cpu = get_cpu_type ();
182 ulong tmp;
183
184 /* cpu configuration register */
185 tmp = GTREGREAD (CPU_CONFIGURATION);
186
187 /* set the SINGLE_CPU bit see MV64460 P.399 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200188#ifndef CONFIG_SYS_GT_DUAL_CPU /* SINGLE_CPU seems to cause JTAG problems */
wdenk3a473b22004-01-03 00:43:19 +0000189 tmp |= CPU_CONF_SINGLE_CPU;
190#endif
191
192 tmp &= ~CPU_CONF_AACK_DELAY_2;
193
194 tmp |= CPU_CONF_DP_VALID;
195 tmp |= CPU_CONF_AP_VALID;
196
197 tmp |= CPU_CONF_PIPELINE;
198
199 GT_REG_WRITE (CPU_CONFIGURATION, tmp); /* Marvell (VXWorks) writes 0x20220FF */
200
201 /* CPU master control register */
202 tmp = GTREGREAD (CPU_MASTER_CONTROL);
203
204 tmp |= CPU_MAST_CTL_ARB_EN;
205
206 if ((cpu == CPU_7400) ||
207 (cpu == CPU_7410) || (cpu == CPU_7455) || (cpu == CPU_7450)) {
208
209 tmp |= CPU_MAST_CTL_CLEAN_BLK;
210 tmp |= CPU_MAST_CTL_FLUSH_BLK;
211
212 } else {
213 /* cleanblock must be cleared for CPUs
214 * that do not support this command (603e, 750)
215 * see Res#1 */
216 tmp &= ~CPU_MAST_CTL_CLEAN_BLK;
217 tmp &= ~CPU_MAST_CTL_FLUSH_BLK;
218 }
219 GT_REG_WRITE (CPU_MASTER_CONTROL, tmp);
220}
221
222/*
wdenkc837dcb2004-01-20 23:12:12 +0000223 * board_early_init_f.
wdenk3a473b22004-01-03 00:43:19 +0000224 *
225 * set up gal. device mappings, etc.
226 */
wdenkc837dcb2004-01-20 23:12:12 +0000227int board_early_init_f (void)
wdenk3a473b22004-01-03 00:43:19 +0000228{
229 uchar sram_boot = 0;
230
231 /*
232 * set up the GT the way the kernel wants it
233 * the call to move the GT register space will obviously
234 * fail if it has already been done, but we're going to assume
235 * that if it's not at the power-on location, it's where we put
236 * it last time. (huber)
237 */
238
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200239 my_remap_gt_regs (CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS);
wdenk3a473b22004-01-03 00:43:19 +0000240
241 /* No PCI in first release of Port To_do: enable it. */
242#ifdef CONFIG_PCI
243 gt_pci_config ();
244#endif
245 /* mask all external interrupt sources */
246 GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_LOW, 0);
247 GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_HIGH, 0);
248 /* new in MV6446x */
249 GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_LOW, 0);
250 GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_HIGH, 0);
251 /* --------------------- */
252 GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
253 GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
254 GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
255 GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
256 /* does not exist in MV6446x
257 GT_REG_WRITE(CPU_INT_0_MASK, 0);
258 GT_REG_WRITE(CPU_INT_1_MASK, 0);
259 GT_REG_WRITE(CPU_INT_2_MASK, 0);
260 GT_REG_WRITE(CPU_INT_3_MASK, 0);
261 --------------------- */
262
263
264 /* ----- DEVICE BUS SETTINGS ------ */
265
266 /*
267 * EVB
268 * 0 - SRAM ????
269 * 1 - RTC ????
270 * 2 - UART ????
271 * 3 - Flash checked 32Bit Intel Strata
272 * boot - BootCS checked 8Bit 29LV040B
273 *
274 * Zuma
275 * 0 - Flash
276 * boot - BootCS
277 */
278
279 /*
280 * the dual 7450 module requires burst access to the boot
281 * device, so the serial rom copies the boot device to the
282 * on-board sram on the eval board, and updates the correct
283 * registers to boot from the sram. (device0)
284 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200285 if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE)
wdenk3a473b22004-01-03 00:43:19 +0000286 sram_boot = 1;
287 if (!sram_boot)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200288 memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
wdenk3a473b22004-01-03 00:43:19 +0000289
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200290 memoryMapDeviceSpace (DEVICE1, CONFIG_SYS_DEV1_SPACE, CONFIG_SYS_DEV1_SIZE);
291 memoryMapDeviceSpace (DEVICE2, CONFIG_SYS_DEV2_SPACE, CONFIG_SYS_DEV2_SIZE);
292 memoryMapDeviceSpace (DEVICE3, CONFIG_SYS_DEV3_SPACE, CONFIG_SYS_DEV3_SIZE);
wdenk3a473b22004-01-03 00:43:19 +0000293
294
295 /* configure device timing */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200296#ifdef CONFIG_SYS_DEV0_PAR /* set port parameters for SRAM device module access */
wdenk3a473b22004-01-03 00:43:19 +0000297 if (!sram_boot)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200298 GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CONFIG_SYS_DEV0_PAR);
wdenk3a473b22004-01-03 00:43:19 +0000299#endif
300
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200301#ifdef CONFIG_SYS_DEV1_PAR /* set port parameters for RTC device module access */
302 GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CONFIG_SYS_DEV1_PAR);
wdenk3a473b22004-01-03 00:43:19 +0000303#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200304#ifdef CONFIG_SYS_DEV2_PAR /* set port parameters for DUART device module access */
305 GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CONFIG_SYS_DEV2_PAR);
wdenk3a473b22004-01-03 00:43:19 +0000306#endif
307
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200308#ifdef CONFIG_SYS_32BIT_BOOT_PAR /* set port parameters for Flash device module access */
wdenk3a473b22004-01-03 00:43:19 +0000309 /* detect if we are booting from the 32 bit flash */
310 if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
311 /* 32 bit boot flash */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200312 GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
wdenk3a473b22004-01-03 00:43:19 +0000313 GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200314 CONFIG_SYS_32BIT_BOOT_PAR);
wdenk3a473b22004-01-03 00:43:19 +0000315 } else {
316 /* 8 bit boot flash */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200317 GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
318 GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
wdenk3a473b22004-01-03 00:43:19 +0000319 }
320#else
321 /* 8 bit boot flash only */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200322/* GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);*/
wdenk3a473b22004-01-03 00:43:19 +0000323#endif
324
325
326 gt_cpu_config ();
327
328 /* MPP setup */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200329 GT_REG_WRITE (MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0);
330 GT_REG_WRITE (MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1);
331 GT_REG_WRITE (MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2);
332 GT_REG_WRITE (MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3);
wdenk3a473b22004-01-03 00:43:19 +0000333
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200334 GT_REG_WRITE (GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL);
wdenk3a473b22004-01-03 00:43:19 +0000335 DEBUG_LED0_ON ();
336 DEBUG_LED1_ON ();
337 DEBUG_LED2_ON ();
338
339 return 0;
340}
341
342/* various things to do after relocation */
343
344int misc_init_r ()
345{
346 icache_enable ();
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200347#ifdef CONFIG_SYS_L2
wdenk3a473b22004-01-03 00:43:19 +0000348 l2cache_enable ();
349#endif
350#ifdef CONFIG_MPSC
351
352 mpsc_sdma_init ();
353 mpsc_init2 ();
354#endif
355
356#if 0
357 /* disable the dcache and MMU */
358 dcache_lock ();
359#endif
360 return 0;
361}
362
363void after_reloc (ulong dest_addr, gd_t * gd)
364{
365 /* check to see if we booted from the sram. If so, move things
366 * back to the way they should be. (we're running from main
367 * memory at this point now */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200368 if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE) {
369 memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
370 memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_DFL_BOOTCS_BASE, _8M);
wdenk3a473b22004-01-03 00:43:19 +0000371 }
372 display_mem_map ();
373 /* now, jump to the main ppcboot board init code */
374 board_init_r (gd, dest_addr);
375 /* NOTREACHED */
376}
377
378/* ------------------------------------------------------------------------- */
379
380/*
381 * Check Board Identity:
382 *
383 * right now, assume borad type. (there is just one...after all)
384 */
385
386int checkboard (void)
387{
388 int l_type = 0;
389
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200390 printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME);
wdenk3a473b22004-01-03 00:43:19 +0000391 return (l_type);
392}
393
394/* utility functions */
395void debug_led (int led, int mode)
396{
397 volatile int *addr = 0;
Wolfgang Denk774b3572011-11-29 22:17:49 +0000398 __maybe_unused int dummy;
wdenk3a473b22004-01-03 00:43:19 +0000399
400 if (mode == 1) {
401 switch (led) {
402 case 0:
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200403 addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
wdenk3a473b22004-01-03 00:43:19 +0000404 0x08000);
405 break;
406
407 case 1:
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200408 addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
wdenk3a473b22004-01-03 00:43:19 +0000409 0x0c000);
410 break;
411
412 case 2:
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200413 addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
wdenk3a473b22004-01-03 00:43:19 +0000414 0x10000);
415 break;
416 }
417 } else if (mode == 0) {
418 switch (led) {
419 case 0:
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200420 addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
wdenk3a473b22004-01-03 00:43:19 +0000421 0x14000);
422 break;
423
424 case 1:
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200425 addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
wdenk3a473b22004-01-03 00:43:19 +0000426 0x18000);
427 break;
428
429 case 2:
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200430 addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
wdenk3a473b22004-01-03 00:43:19 +0000431 0x1c000);
432 break;
433 }
434 }
435
436 dummy = *addr;
437}
438
439int display_mem_map (void)
440{
441 int i, j;
442 unsigned int base, size, width;
443
444 /* SDRAM */
445 printf ("SD (DDR) RAM\n");
446 for (i = 0; i <= BANK3; i++) {
447 base = memoryGetBankBaseAddress (i);
448 size = memoryGetBankSize (i);
449 if (size != 0) {
450 printf ("BANK%d: base - 0x%08x\tsize - %dM bytes\n",
451 i, base, size >> 20);
452 }
453 }
454
455 /* CPU's PCI windows */
456 for (i = 0; i <= PCI_HOST1; i++) {
457 printf ("\nCPU's PCI %d windows\n", i);
458 base = pciGetSpaceBase (i, PCI_IO);
459 size = pciGetSpaceSize (i, PCI_IO);
460 printf (" IO: base - 0x%08x\tsize - %dM bytes\n", base,
461 size >> 20);
462 for (j = 0;
463 j <=
464 PCI_REGION0
465 /*ronen currently only first PCI MEM is used 3 */ ;
466 j++) {
467 base = pciGetSpaceBase (i, j);
468 size = pciGetSpaceSize (i, j);
469 printf ("MEMORY %d: base - 0x%08x\tsize - %dM bytes\n", j, base, size >> 20);
470 }
471 }
472
473 /* Devices */
474 printf ("\nDEVICES\n");
475 for (i = 0; i <= DEVICE3; i++) {
476 base = memoryGetDeviceBaseAddress (i);
477 size = memoryGetDeviceSize (i);
478 width = memoryGetDeviceWidth (i) * 8;
479 printf ("DEV %d: base - 0x%08x size - %dM bytes\twidth - %d bits", i, base, size >> 20, width);
480 if (i == 0)
481 printf ("\t- EXT SRAM (actual - 1M)\n");
482 else if (i == 1)
483 printf ("\t- RTC\n");
484 else if (i == 2)
485 printf ("\t- UART\n");
486 else
487 printf ("\t- LARGE FLASH\n");
488 }
489
490 /* Bootrom */
491 base = memoryGetDeviceBaseAddress (BOOT_DEVICE); /* Boot */
492 size = memoryGetDeviceSize (BOOT_DEVICE);
493 width = memoryGetDeviceWidth (BOOT_DEVICE) * 8;
494 printf (" BOOT: base - 0x%08x size - %dM bytes\twidth - %d bits\n",
495 base, size >> 20, width);
496 return (0);
497}
498
499/* DRAM check routines copied from gw8260 */
500
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200501#if defined (CONFIG_SYS_DRAM_TEST)
wdenk3a473b22004-01-03 00:43:19 +0000502
503/*********************************************************************/
504/* NAME: move64() - moves a double word (64-bit) */
505/* */
506/* DESCRIPTION: */
507/* this function performs a double word move from the data at */
508/* the source pointer to the location at the destination pointer. */
509/* */
510/* INPUTS: */
511/* unsigned long long *src - pointer to data to move */
512/* */
513/* OUTPUTS: */
514/* unsigned long long *dest - pointer to locate to move data */
515/* */
516/* RETURNS: */
517/* None */
518/* */
519/* RESTRICTIONS/LIMITATIONS: */
520/* May cloober fr0. */
521/* */
522/*********************************************************************/
523static void move64 (unsigned long long *src, unsigned long long *dest)
524{
525 asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */
526 "stfd 0, 0(4)" /* *dest = fpr0 */
527 : : : "fr0"); /* Clobbers fr0 */
528 return;
529}
530
531
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200532#if defined (CONFIG_SYS_DRAM_TEST_DATA)
wdenk3a473b22004-01-03 00:43:19 +0000533
534unsigned long long pattern[] = {
wdenkeedcd072004-09-08 22:03:11 +0000535 0xaaaaaaaaaaaaaaaaULL,
536 0xccccccccccccccccULL,
537 0xf0f0f0f0f0f0f0f0ULL,
538 0xff00ff00ff00ff00ULL,
539 0xffff0000ffff0000ULL,
540 0xffffffff00000000ULL,
541 0x00000000ffffffffULL,
542 0x0000ffff0000ffffULL,
543 0x00ff00ff00ff00ffULL,
544 0x0f0f0f0f0f0f0f0fULL,
545 0x3333333333333333ULL,
546 0x5555555555555555ULL,
wdenk3a473b22004-01-03 00:43:19 +0000547};
548
549/*********************************************************************/
550/* NAME: mem_test_data() - test data lines for shorts and opens */
551/* */
552/* DESCRIPTION: */
553/* Tests data lines for shorts and opens by forcing adjacent data */
554/* to opposite states. Because the data lines could be routed in */
555/* an arbitrary manner the must ensure test patterns ensure that */
556/* every case is tested. By using the following series of binary */
557/* patterns every combination of adjacent bits is test regardless */
558/* of routing. */
559/* */
560/* ...101010101010101010101010 */
561/* ...110011001100110011001100 */
562/* ...111100001111000011110000 */
563/* ...111111110000000011111111 */
564/* */
565/* Carrying this out, gives us six hex patterns as follows: */
566/* */
567/* 0xaaaaaaaaaaaaaaaa */
568/* 0xcccccccccccccccc */
569/* 0xf0f0f0f0f0f0f0f0 */
570/* 0xff00ff00ff00ff00 */
571/* 0xffff0000ffff0000 */
572/* 0xffffffff00000000 */
573/* */
574/* The number test patterns will always be given by: */
575/* */
576/* log(base 2)(number data bits) = log2 (64) = 6 */
577/* */
578/* To test for short and opens to other signals on our boards. we */
579/* simply */
580/* test with the 1's complemnt of the paterns as well. */
581/* */
582/* OUTPUTS: */
583/* Displays failing test pattern */
584/* */
585/* RETURNS: */
586/* 0 - Passed test */
587/* 1 - Failed test */
588/* */
589/* RESTRICTIONS/LIMITATIONS: */
590/* Assumes only one one SDRAM bank */
591/* */
592/*********************************************************************/
593int mem_test_data (void)
594{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200595 unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_MEMTEST_START;
Wolfgang Denk77ddac92005-10-13 16:45:02 +0200596 unsigned long long temp64 = 0;
wdenk3a473b22004-01-03 00:43:19 +0000597 int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
598 int i;
599 unsigned int hi, lo;
600
601 for (i = 0; i < num_patterns; i++) {
602 move64 (&(pattern[i]), pmem);
603 move64 (pmem, &temp64);
604
605 /* hi = (temp64>>32) & 0xffffffff; */
606 /* lo = temp64 & 0xffffffff; */
607 /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
608
609 hi = (pattern[i] >> 32) & 0xffffffff;
610 lo = pattern[i] & 0xffffffff;
611 /* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo); */
612
613 if (temp64 != pattern[i]) {
614 printf ("\n Data Test Failed, pattern 0x%08x%08x",
615 hi, lo);
616 return 1;
617 }
618 }
619
620 return 0;
621}
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200622#endif /* CONFIG_SYS_DRAM_TEST_DATA */
wdenk3a473b22004-01-03 00:43:19 +0000623
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200624#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
wdenk3a473b22004-01-03 00:43:19 +0000625/*********************************************************************/
626/* NAME: mem_test_address() - test address lines */
627/* */
628/* DESCRIPTION: */
629/* This function performs a test to verify that each word im */
630/* memory is uniquly addressable. The test sequence is as follows: */
631/* */
632/* 1) write the address of each word to each word. */
633/* 2) verify that each location equals its address */
634/* */
635/* OUTPUTS: */
636/* Displays failing test pattern and address */
637/* */
638/* RETURNS: */
639/* 0 - Passed test */
640/* 1 - Failed test */
641/* */
642/* RESTRICTIONS/LIMITATIONS: */
643/* */
644/* */
645/*********************************************************************/
646int mem_test_address (void)
647{
648 volatile unsigned int *pmem =
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200649 (volatile unsigned int *) CONFIG_SYS_MEMTEST_START;
650 const unsigned int size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 4;
wdenk3a473b22004-01-03 00:43:19 +0000651 unsigned int i;
652
653 /* write address to each location */
654 for (i = 0; i < size; i++) {
655 pmem[i] = i;
656 }
657
658 /* verify each loaction */
659 for (i = 0; i < size; i++) {
660 if (pmem[i] != i) {
661 printf ("\n Address Test Failed at 0x%x", i);
662 return 1;
663 }
664 }
665 return 0;
666}
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200667#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */
wdenk3a473b22004-01-03 00:43:19 +0000668
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200669#if defined (CONFIG_SYS_DRAM_TEST_WALK)
wdenk3a473b22004-01-03 00:43:19 +0000670/*********************************************************************/
671/* NAME: mem_march() - memory march */
672/* */
673/* DESCRIPTION: */
674/* Marches up through memory. At each location verifies rmask if */
675/* read = 1. At each location write wmask if write = 1. Displays */
676/* failing address and pattern. */
677/* */
678/* INPUTS: */
679/* volatile unsigned long long * base - start address of test */
680/* unsigned int size - number of dwords(64-bit) to test */
681/* unsigned long long rmask - read verify mask */
682/* unsigned long long wmask - wrtie verify mask */
683/* short read - verifies rmask if read = 1 */
684/* short write - writes wmask if write = 1 */
685/* */
686/* OUTPUTS: */
687/* Displays failing test pattern and address */
688/* */
689/* RETURNS: */
690/* 0 - Passed test */
691/* 1 - Failed test */
692/* */
693/* RESTRICTIONS/LIMITATIONS: */
694/* */
695/* */
696/*********************************************************************/
697int mem_march (volatile unsigned long long *base,
698 unsigned int size,
699 unsigned long long rmask,
700 unsigned long long wmask, short read, short write)
701{
702 unsigned int i;
Wolfgang Denk77ddac92005-10-13 16:45:02 +0200703 unsigned long long temp = 0;
wdenk3a473b22004-01-03 00:43:19 +0000704 unsigned int hitemp, lotemp, himask, lomask;
705
706 for (i = 0; i < size; i++) {
707 if (read != 0) {
708 /* temp = base[i]; */
709 move64 ((unsigned long long *) &(base[i]), &temp);
710 if (rmask != temp) {
711 hitemp = (temp >> 32) & 0xffffffff;
712 lotemp = temp & 0xffffffff;
713 himask = (rmask >> 32) & 0xffffffff;
714 lomask = rmask & 0xffffffff;
715
716 printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp);
717 return 1;
718 }
719 }
720 if (write != 0) {
721 /* base[i] = wmask; */
722 move64 (&wmask, (unsigned long long *) &(base[i]));
723 }
724 }
725 return 0;
726}
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200727#endif /* CONFIG_SYS_DRAM_TEST_WALK */
wdenk3a473b22004-01-03 00:43:19 +0000728
729/*********************************************************************/
730/* NAME: mem_test_walk() - a simple walking ones test */
731/* */
732/* DESCRIPTION: */
733/* Performs a walking ones through entire physical memory. The */
734/* test uses as series of memory marches, mem_march(), to verify */
735/* and write the test patterns to memory. The test sequence is as */
736/* follows: */
737/* 1) march writing 0000...0001 */
738/* 2) march verifying 0000...0001 , writing 0000...0010 */
739/* 3) repeat step 2 shifting masks left 1 bit each time unitl */
740/* the write mask equals 1000...0000 */
741/* 4) march verifying 1000...0000 */
742/* The test fails if any of the memory marches return a failure. */
743/* */
744/* OUTPUTS: */
745/* Displays which pass on the memory test is executing */
746/* */
747/* RETURNS: */
748/* 0 - Passed test */
749/* 1 - Failed test */
750/* */
751/* RESTRICTIONS/LIMITATIONS: */
752/* */
753/* */
754/*********************************************************************/
755int mem_test_walk (void)
756{
757 unsigned long long mask;
758 volatile unsigned long long *pmem =
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200759 (volatile unsigned long long *) CONFIG_SYS_MEMTEST_START;
760 const unsigned long size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 8;
wdenk3a473b22004-01-03 00:43:19 +0000761
762 unsigned int i;
763
764 mask = 0x01;
765
766 printf ("Initial Pass");
767 mem_march (pmem, size, 0x0, 0x1, 0, 1);
768
769 printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
770 printf (" ");
771 printf (" ");
772 printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
773
774 for (i = 0; i < 63; i++) {
775 printf ("Pass %2d", i + 2);
776 if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) {
777 /*printf("mask: 0x%x, pass: %d, ", mask, i); */
778 return 1;
779 }
780 mask = mask << 1;
781 printf ("\b\b\b\b\b\b\b");
782 }
783
784 printf ("Last Pass");
785 if (mem_march (pmem, size, 0, mask, 0, 1) != 0) {
786 /* printf("mask: 0x%x", mask); */
787 return 1;
788 }
789 printf ("\b\b\b\b\b\b\b\b\b");
790 printf (" ");
791 printf ("\b\b\b\b\b\b\b\b\b");
792
793 return 0;
794}
795
796/*********************************************************************/
797/* NAME: testdram() - calls any enabled memory tests */
798/* */
799/* DESCRIPTION: */
800/* Runs memory tests if the environment test variables are set to */
801/* 'y'. */
802/* */
803/* INPUTS: */
804/* testdramdata - If set to 'y', data test is run. */
805/* testdramaddress - If set to 'y', address test is run. */
806/* testdramwalk - If set to 'y', walking ones test is run */
807/* */
808/* OUTPUTS: */
809/* None */
810/* */
811/* RETURNS: */
812/* 0 - Passed test */
813/* 1 - Failed test */
814/* */
815/* RESTRICTIONS/LIMITATIONS: */
816/* */
817/* */
818/*********************************************************************/
819int testdram (void)
820{
wdenk3a473b22004-01-03 00:43:19 +0000821 int rundata, runaddress, runwalk;
822
Joe Hershbergerec8a2522012-12-11 22:16:22 -0600823 rundata = getenv_yesno("testdramdata") == 1;
824 runaddress = getenv_yesno("testdramaddress") == 1;
825 runwalk = getenv_yesno("testdramwalk") == 1;
wdenk3a473b22004-01-03 00:43:19 +0000826
827/* rundata = 1; */
828/* runaddress = 0; */
829/* runwalk = 0; */
830
831 if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200832 printf ("Testing RAM from 0x%08x to 0x%08x ... (don't panic... that will take a moment !!!!)\n", CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
wdenk3a473b22004-01-03 00:43:19 +0000833 }
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200834#ifdef CONFIG_SYS_DRAM_TEST_DATA
wdenk3a473b22004-01-03 00:43:19 +0000835 if (rundata == 1) {
836 printf ("Test DATA ... ");
837 if (mem_test_data () == 1) {
838 printf ("failed \n");
839 return 1;
840 } else
841 printf ("ok \n");
842 }
843#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200844#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
wdenk3a473b22004-01-03 00:43:19 +0000845 if (runaddress == 1) {
846 printf ("Test ADDRESS ... ");
847 if (mem_test_address () == 1) {
848 printf ("failed \n");
849 return 1;
850 } else
851 printf ("ok \n");
852 }
853#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200854#ifdef CONFIG_SYS_DRAM_TEST_WALK
wdenk3a473b22004-01-03 00:43:19 +0000855 if (runwalk == 1) {
856 printf ("Test WALKING ONEs ... ");
857 if (mem_test_walk () == 1) {
858 printf ("failed \n");
859 return 1;
860 } else
861 printf ("ok \n");
862 }
863#endif
864 if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
865 printf ("passed\n");
866 }
867 return 0;
868
869}
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200870#endif /* CONFIG_SYS_DRAM_TEST */
wdenk3a473b22004-01-03 00:43:19 +0000871
872/* ronen - the below functions are used by the bootm function */
873/* - we map the base register to fbe00000 (same mapping as in the LSP) */
874/* - we turn off the RX gig dmas - to prevent the dma from overunning */
875/* the kernel data areas. */
876/* - we diable and invalidate the icache and dcache. */
877void my_remap_gt_regs_bootm (u32 cur_loc, u32 new_loc)
878{
879 u32 temp;
880
881 temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
882 if ((temp & 0xffff) == new_loc >> 16)
883 return;
884
885 temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
886 0xffff0000) | (new_loc >> 16);
887
888 out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
889
890 while ((WORD_SWAP (*((volatile unsigned int *) (NONE_CACHEABLE |
891 new_loc |
892 (INTERNAL_SPACE_DECODE)))))
893 != temp);
894
895}
896
897void board_prebootm_init ()
898{
899
900/* change window size of PCI1 IO in order tp prevent overlaping with REG BASE. */
901 GT_REG_WRITE (PCI_1_IO_SIZE, (_64K - 1) >> 16);
902
903/* Stop GigE Rx DMA engines */
904 GT_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (0), 0x0000ff00);
905 GT_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (1), 0x0000ff00);
906 GT_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (2), 0x0000ff00);
907
908/* Relocate MV64460 internal regs */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200909 my_remap_gt_regs_bootm (CONFIG_SYS_GT_REGS, BRIDGE_REG_BASE_BOOTM);
wdenk3a473b22004-01-03 00:43:19 +0000910
911 icache_disable ();
wdenk3a473b22004-01-03 00:43:19 +0000912 dcache_disable ();
913}
Ben Warren10efa022008-08-31 20:37:00 -0700914
915int board_eth_init(bd_t *bis)
916{
Marek Vasut021f6032012-03-02 22:39:32 +0000917 int ret;
918 ret = pci_eth_init(bis);
919 if (!ret)
920 ret = mv6446x_eth_initialize(bis);
921 return ret;
Ben Warren10efa022008-08-31 20:37:00 -0700922}