Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 1a4596601fd395f3afb8f82f3f840c5e00bdd57a / . / include / configs / calimain.h
blob: c76bc2cbe6154779c822097377ca3f0a2da23d5b [file] [log] [blame]
Christian Riesch9a3aae22012-02-02 00:44:42 +0000[diff] [blame]1/*
2 * Copyright (C) 2011 OMICRON electronics GmbH
3 *
4 * Based on da850evm.h. Original Copyrights follow:
5 *
6 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
7 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
8 *
Wolfgang Denk1a459662013-07-08 09:37:19 +0200[diff] [blame^]9 * SPDX-License-Identifier: GPL-2.0+
Christian Riesch9a3aae22012-02-02 00:44:42 +0000[diff] [blame]10 */
11
12#ifndef __CONFIG_H
13#define __CONFIG_H
14
15/*
16 * Board
17 */
18#define CONFIG_DRIVER_TI_EMAC
19#define MACH_TYPE_CALIMAIN 3528
20#define CONFIG_MACH_TYPE MACH_TYPE_CALIMAIN
21
22/*
23 * SoC Configuration
24 */
25#define CONFIG_MACH_DAVINCI_CALIMAIN
26#define CONFIG_ARM926EJS /* arm926ejs CPU core */
27#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
28#define CONFIG_SOC_DA850 /* TI DA850 SoC */
29#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
30#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
31#define CONFIG_SYS_OSCIN_FREQ calimain_get_osc_freq()
32#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
33#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
34#define CONFIG_SYS_HZ 1000
35#define CONFIG_SYS_TEXT_BASE 0x60000000
36#define CONFIG_DA850_LOWLEVEL
37#define CONFIG_SYS_DA850_PLL_INIT
38#define CONFIG_SYS_DA850_DDR_INIT
39#define CONFIG_ARCH_CPU_INIT
40#define CONFIG_DA8XX_GPIO
41#define CONFIG_HW_WATCHDOG
42#define CONFIG_SYS_WDTTIMERBASE DAVINCI_TIMER1_BASE
43#define CONFIG_SYS_WDT_PERIOD_LOW \
44 (60 * CONFIG_SYS_OSCIN_FREQ) /* 60 s heartbeat */
45#define CONFIG_SYS_WDT_PERIOD_HIGH 0x0
46#define CONFIG_SYS_DV_NOR_BOOT_CFG (0x11)
47
48/*
49 * PLL configuration
50 */
51#define CONFIG_SYS_DV_CLKMODE 0
52#define CONFIG_SYS_DA850_PLL0_POSTDIV 1
53#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000
54#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001
55#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002
56#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003
57#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002
58#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1
59#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005
60
61#define CONFIG_SYS_DA850_PLL1_POSTDIV 1
62#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000
63#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001
64#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002
65
66#define CONFIG_SYS_DA850_PLL0_PLLM \
67 ((calimain_get_osc_freq() == 25000000) ? 23 : 24)
68#define CONFIG_SYS_DA850_PLL1_PLLM \
69 ((calimain_get_osc_freq() == 25000000) ? 20 : 21)
70
71/*
72 * DDR2 memory configuration
73 */
74#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
75 DV_DDR_PHY_EXT_STRBEN | \
76 (0x4 << DV_DDR_PHY_RD_LATENCY_SHIFT))
77
78#define CONFIG_SYS_DA850_DDR2_SDBCR ( \
79 (1 << DV_DDR_SDCR_DDR2EN_SHIFT) | \
80 (1 << DV_DDR_SDCR_DDRDRIVE0_SHIFT) | \
81 (1 << DV_DDR_SDCR_DDREN_SHIFT) | \
82 (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \
83 (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) | \
84 (0x3 << DV_DDR_SDCR_CL_SHIFT) | \
85 (0x3 << DV_DDR_SDCR_IBANK_SHIFT) | \
86 (0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
87
88/* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */
89#define CONFIG_SYS_DA850_DDR2_SDBCR2 0
90
91#define CONFIG_SYS_DA850_DDR2_SDTIMR ( \
92 (16 << DV_DDR_SDTMR1_RFC_SHIFT) | \
93 (1 << DV_DDR_SDTMR1_RP_SHIFT) | \
94 (1 << DV_DDR_SDTMR1_RCD_SHIFT) | \
95 (1 << DV_DDR_SDTMR1_WR_SHIFT) | \
96 (5 << DV_DDR_SDTMR1_RAS_SHIFT) | \
97 (7 << DV_DDR_SDTMR1_RC_SHIFT) | \
98 (1 << DV_DDR_SDTMR1_RRD_SHIFT) | \
99 (1 << DV_DDR_SDTMR1_WTR_SHIFT))
100
101#define CONFIG_SYS_DA850_DDR2_SDTIMR2 ( \
102 (7 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \
103 (2 << DV_DDR_SDTMR2_XP_SHIFT) | \
104 (0 << DV_DDR_SDTMR2_ODT_SHIFT) | \
105 (18 << DV_DDR_SDTMR2_XSNR_SHIFT) | \
106 (199 << DV_DDR_SDTMR2_XSRD_SHIFT) | \
107 (0 << DV_DDR_SDTMR2_RTP_SHIFT) | \
108 (2 << DV_DDR_SDTMR2_CKE_SHIFT))
109
110#define CONFIG_SYS_DA850_DDR2_SDRCR 0x000003FF
111#define CONFIG_SYS_DA850_DDR2_PBBPR 0x30
112
113/*
114 * Flash memory timing
115 */
116
117#define CONFIG_SYS_DA850_CS2CFG ( \
118 DAVINCI_ABCR_WSETUP(2) | \
119 DAVINCI_ABCR_WSTROBE(5) | \
120 DAVINCI_ABCR_WHOLD(3) | \
121 DAVINCI_ABCR_RSETUP(1) | \
122 DAVINCI_ABCR_RSTROBE(14) | \
123 DAVINCI_ABCR_RHOLD(0) | \
124 DAVINCI_ABCR_TA(3) | \
125 DAVINCI_ABCR_ASIZE_16BIT)
126
127/* single 64 MB NOR flash device connected to CS2 and CS3 */
128#define CONFIG_SYS_DA850_CS3CFG CONFIG_SYS_DA850_CS2CFG
129
130/*
131 * Memory Info
132 */
133#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */
134#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
135#define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */
136#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
137
138#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \
139 DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \
140 DAVINCI_SYSCFG_SUSPSRC_SPI1 | \
141 DAVINCI_SYSCFG_SUSPSRC_UART2 | \
142 DAVINCI_SYSCFG_SUSPSRC_EMAC | \
143 DAVINCI_SYSCFG_SUSPSRC_I2C)
144
145/* memtest start addr */
146#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000)
147
148/* memtest will be run on 16MB */
149#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (16 << 20))
150
151#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
Christian Riesch9a3aae22012-02-02 00:44:42 +0000[diff] [blame]152
153/*
154 * Serial Driver info
155 */
156#define CONFIG_SYS_NS16550
157#define CONFIG_SYS_NS16550_SERIAL
158#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
159#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
160#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
161#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
162#define CONFIG_BAUDRATE 115200 /* Default baud rate */
Christian Riesch9a3aae22012-02-02 00:44:42 +0000[diff] [blame]163
164#define CONFIG_ENV_IS_IN_FLASH
165#define CONFIG_FLASH_CFI_DRIVER
166#define CONFIG_SYS_FLASH_CFI
167#define CONFIG_SYS_FLASH_PROTECTION
168#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
169#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
170#define CONFIG_SYS_FLASH_SECT_SZ (128 << 10) /* 128KB */
171#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
172#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ
173#define CONFIG_ENV_ADDR \
174 (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SECT_SZ * 2)
175#define CONFIG_ENV_SIZE (128 << 10)
176#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
177#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
178#define PHYS_FLASH_SIZE (64 << 20) /* Flash size 64MB */
179#define CONFIG_SYS_MAX_FLASH_SECT \
180 ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ) + 3)
181
182/*
183 * Network & Ethernet Configuration
184 */
185#ifdef CONFIG_DRIVER_TI_EMAC
186#define CONFIG_EMAC_MDIO_PHY_NUM 1
187#define CONFIG_MII
188#define CONFIG_BOOTP_DEFAULT
189#define CONFIG_BOOTP_DNS
190#define CONFIG_BOOTP_DNS2
191#define CONFIG_BOOTP_SEND_HOSTNAME
192#define CONFIG_NET_RETRY_COUNT 10
193#endif
194
195/*
196 * U-Boot general configuration
197 */
198#define CONFIG_BOOTFILE "uImage" /* Boot file name */
199#define CONFIG_SYS_PROMPT "Calimain > " /* Command Prompt */
200#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
201#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
202#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
203#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
204#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
205#define CONFIG_LOADADDR 0xc0700000
206#define CONFIG_VERSION_VARIABLE
207#define CONFIG_AUTO_COMPLETE
208#define CONFIG_SYS_HUSH_PARSER
Christian Riesch9a3aae22012-02-02 00:44:42 +0000[diff] [blame]209#define CONFIG_CMDLINE_EDITING
210#define CONFIG_SYS_LONGHELP
211#define CONFIG_CRC32_VERIFY
212#define CONFIG_MX_CYCLIC
213
214/*
215 * Linux Information
216 */
217#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
218#define CONFIG_CMDLINE_TAG
219#define CONFIG_REVISION_TAG
220#define CONFIG_SETUP_MEMORY_TAGS
221#define CONFIG_BOOTARGS ""
222#define CONFIG_BOOTCOMMAND "run checkupdate; run checkbutton;"
223#define CONFIG_BOOTDELAY 0
224#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
225#define CONFIG_BOOT_RETRY_TIME 60 /* continue boot after 60 s inactivity */
226#define CONFIG_AUTOBOOT_KEYED
227#define CONFIG_AUTOBOOT_DELAY_STR "\x0d" /* press ENTER to interrupt BOOT */
228#define CONFIG_RESET_TO_RETRY
229
230/*
231 * Default environment settings
232 * gpio0 = button, gpio1 = led green, gpio2 = led red
233 * verify = n ... disable kernel checksum verification for faster booting
234 */
235#define CONFIG_EXTRA_ENV_SETTINGS \
236 "tftpdir=calimero\0" \
237 "flashkernel=tftpboot $loadaddr $tftpdir/uImage; " \
238 "erase 0x60800000 +0x400000; " \
239 "cp.b $loadaddr 0x60800000 $filesize\0" \
240 "flashrootfs=" \
241 "tftpboot $loadaddr $tftpdir/rootfs.jffs2; " \
242 "erase 0x60c00000 +0x2e00000; " \
243 "cp.b $loadaddr 0x60c00000 $filesize\0" \
244 "flashuboot=tftpboot $loadaddr $tftpdir/u-boot.bin; " \
245 "protect off all; " \
246 "erase 0x60000000 +0x80000; " \
247 "cp.b $loadaddr 0x60000000 $filesize\0" \
248 "flashrlk=tftpboot $loadaddr $tftpdir/uImage-rlk; " \
249 "erase 0x60080000 +0x780000; " \
250 "cp.b $loadaddr 0x60080000 $filesize\0" \
251 "erase_persistent=erase 0x63a00000 +0x600000;\0" \
252 "bootnor=setenv bootargs console=ttyS2,115200n8 " \
253 "root=/dev/mtdblock3 rw rootfstype=jffs2 " \
254 "rootwait ethaddr=$ethaddr; " \
255 "gpio c 1; gpio s 2; bootm 0x60800000\0" \
256 "bootrlk=gpio s 1; gpio s 2;" \
257 "setenv bootargs console=ttyS2,115200n8 " \
258 "ethaddr=$ethaddr; bootm 0x60080000\0" \
259 "boottftp=setenv bootargs console=ttyS2,115200n8 " \
260 "root=/dev/mtdblock3 rw rootfstype=jffs2 " \
261 "rootwait ethaddr=$ethaddr; " \
262 "tftpboot $loadaddr $tftpdir/uImage;" \
263 "gpio c 1; gpio s 2; bootm $loadaddr\0" \
264 "checkupdate=if test -n $update_flag; then " \
265 "echo Previous update failed - starting RLK; " \
266 "run bootrlk; fi; " \
267 "if test -n $initial_setup; then " \
268 "echo Running initial setup procedure; " \
269 "sleep 1; run flashall; fi\0" \
270 "product=accessory\0" \
271 "serial=XX12345\0" \
272 "checknor=" \
273 "if gpio i 0; then run bootnor; fi;\0" \
274 "checkrlk=" \
275 "if gpio i 0; then run bootrlk; fi;\0" \
276 "checkbutton=" \
277 "run checknor; sleep 1;" \
278 "run checknor; sleep 1;" \
279 "run checknor; sleep 1;" \
280 "run checknor; sleep 1;" \
281 "run checknor;" \
282 "gpio s 1; gpio s 2;" \
283 "echo ---- Release button to boot RLK ----;" \
284 "run checkrlk; sleep 1;" \
285 "run checkrlk; sleep 1;" \
286 "run checkrlk; sleep 1;" \
287 "run checkrlk; sleep 1;" \
288 "run checkrlk; sleep 1;" \
289 "run checkrlk;" \
290 "echo ---- Factory reset requested ----;" \
291 "gpio c 1;" \
292 "setenv factory_reset true;" \
293 "saveenv;" \
294 "run bootnor;\0" \
295 "flashall=run flashrlk;" \
296 "run flashkernel;" \
297 "run flashrootfs;" \
298 "setenv erase_datafs true;" \
299 "setenv initial_setup;" \
300 "saveenv;" \
301 "run bootnor;\0" \
302 "verify=n\0" \
303 "clearenv=protect off all;" \
304 "erase 0x60040000 +0x40000;\0" \
305 "bootlimit=3\0" \
306 "altbootcmd=run bootrlk\0"
307
308#define CONFIG_PREBOOT \
309 "echo Version: $ver; " \
310 "echo Serial: $serial; " \
311 "echo MAC: $ethaddr; " \
312 "echo Product: $product; " \
313 "gpio c 1; gpio c 2;"
314
315/*
316 * U-Boot commands
317 */
318#include <config_cmd_default.h>
319#define CONFIG_CMD_ENV
320#define CONFIG_CMD_ASKENV
321#define CONFIG_CMD_DHCP
322#define CONFIG_CMD_DIAG
323#define CONFIG_CMD_MII
324#define CONFIG_CMD_PING
325#define CONFIG_CMD_SAVES
326#define CONFIG_CMD_MEMORY
327#define CONFIG_CMD_GPIO
328
329#ifndef CONFIG_DRIVER_TI_EMAC
330#undef CONFIG_CMD_NET
331#undef CONFIG_CMD_DHCP
332#undef CONFIG_CMD_MII
333#undef CONFIG_CMD_PING
334#endif
335
336/* additions for new relocation code, must added to all boards */
337#define CONFIG_SYS_SDRAM_BASE 0xc0000000
338/* initial stack pointer in internal SRAM */
339#define CONFIG_SYS_INIT_SP_ADDR (0x8001ff00)
340
341#define CONFIG_BOOTCOUNT_LIMIT
Stefan Roese0044c422012-08-16 17:55:41 +0000[diff] [blame]342#define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */
Christian Riesch9a3aae22012-02-02 00:44:42 +0000[diff] [blame]343#define CONFIG_SYS_BOOTCOUNT_ADDR DAVINCI_RTC_BASE
344
345#ifndef __ASSEMBLY__
346int calimain_get_osc_freq(void);
347#endif
348
349#endif /* __CONFIG_H */