blob: 734c6cd2f7c0baaea5e9894362cc66329b52cdf9 [file] [log] [blame]
Lukasz Majewski38517a72011-10-27 10:36:46 +02001/*
2 * drivers/usb/gadget/s3c_udc.h
3 * Samsung S3C on-chip full/high speed USB device controllers
4 * Copyright (C) 2005 for Samsung Electronics
5 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02006 * SPDX-License-Identifier: GPL-2.0+
Lukasz Majewski38517a72011-10-27 10:36:46 +02007 */
8
9#ifndef __S3C_USB_GADGET
10#define __S3C_USB_GADGET
11
12#include <asm/errno.h>
13#include <linux/usb/ch9.h>
14#include <linux/usb/gadget.h>
15#include <linux/list.h>
16#include <usb/lin_gadget_compat.h>
17
18#define PHY0_SLEEP (1 << 5)
19
20/*-------------------------------------------------------------------------*/
21/* DMA bounce buffer size, 16K is enough even for mass storage */
22#define DMA_BUFFER_SIZE (4096*4)
23
24#define EP0_FIFO_SIZE 64
25#define EP_FIFO_SIZE 512
26#define EP_FIFO_SIZE2 1024
27/* ep0-control, ep1in-bulk, ep2out-bulk, ep3in-int */
28#define S3C_MAX_ENDPOINTS 4
29#define S3C_MAX_HW_ENDPOINTS 16
30
31#define WAIT_FOR_SETUP 0
32#define DATA_STATE_XMIT 1
33#define DATA_STATE_NEED_ZLP 2
34#define WAIT_FOR_OUT_STATUS 3
35#define DATA_STATE_RECV 4
36#define WAIT_FOR_COMPLETE 5
37#define WAIT_FOR_OUT_COMPLETE 6
38#define WAIT_FOR_IN_COMPLETE 7
39#define WAIT_FOR_NULL_COMPLETE 8
40
41#define TEST_J_SEL 0x1
42#define TEST_K_SEL 0x2
43#define TEST_SE0_NAK_SEL 0x3
44#define TEST_PACKET_SEL 0x4
45#define TEST_FORCE_ENABLE_SEL 0x5
46
47/* ************************************************************************* */
48/* IO
49 */
50
51enum ep_type {
52 ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt
53};
54
55struct s3c_ep {
56 struct usb_ep ep;
57 struct s3c_udc *dev;
58
59 const struct usb_endpoint_descriptor *desc;
60 struct list_head queue;
61 unsigned long pio_irqs;
62 int len;
63 void *dma_buf;
64
65 u8 stopped;
66 u8 bEndpointAddress;
67 u8 bmAttributes;
68
69 enum ep_type ep_type;
70 int fifo_num;
71};
72
73struct s3c_request {
74 struct usb_request req;
75 struct list_head queue;
76};
77
78struct s3c_udc {
79 struct usb_gadget gadget;
80 struct usb_gadget_driver *driver;
81
82 struct s3c_plat_otg_data *pdata;
83
84 void *dma_buf[S3C_MAX_ENDPOINTS+1];
85 dma_addr_t dma_addr[S3C_MAX_ENDPOINTS+1];
86
87 int ep0state;
88 struct s3c_ep ep[S3C_MAX_ENDPOINTS];
89
90 unsigned char usb_address;
91
Ɓukasz Majewski7cf7bef2012-03-12 22:08:06 +000092 unsigned req_pending:1, req_std:1;
Lukasz Majewski38517a72011-10-27 10:36:46 +020093};
94
95extern struct s3c_udc *the_controller;
96
97#define ep_is_in(EP) (((EP)->bEndpointAddress&USB_DIR_IN) == USB_DIR_IN)
98#define ep_index(EP) ((EP)->bEndpointAddress&0xF)
99#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
100
Lukasz Majewski38517a72011-10-27 10:36:46 +0200101extern void otg_phy_init(struct s3c_udc *dev);
102extern void otg_phy_off(struct s3c_udc *dev);
103
104extern void s3c_udc_ep_set_stall(struct s3c_ep *ep);
105extern int s3c_udc_probe(struct s3c_plat_otg_data *pdata);
106
107struct s3c_plat_otg_data {
108 int (*phy_control)(int on);
109 unsigned int regs_phy;
110 unsigned int regs_otg;
111 unsigned int usb_phy_ctrl;
112 unsigned int usb_flags;
113};
114#endif