blob: 7368629981d037132bdcb5dc9e29ee75e72dbcec [file] [log] [blame]
Mike Frysinger59ac9722008-10-12 23:22:25 -04001/*
2 * U-boot - Configuration file for CSP Minotaur board
3 *
4 * Thu Oct 25 15:30:44 CEST 2007 <hackfin@section5.ch>
5 * Minotaur config, brushed up for official uClinux dist.
6 * Parallel flash support disabled, SPI flash boot command
7 * added ('run flashboot').
8 *
9 * Flash image map:
10 *
11 * 0x00000000 u-boot bootstrap
12 * 0x00010000 environment
13 * 0x00020000 u-boot code
14 * 0x00030000 uImage.initramfs
15 *
16 */
17
18#ifndef __CONFIG_BF537_SRV1_H__
19#define __CONFIG_BF537_SRV1_H__
20
Mike Frysingerf348ab82009-04-24 17:22:40 -040021#include <asm/config-pre.h>
Mike Frysinger59ac9722008-10-12 23:22:25 -040022
23
24/*
25 * Processor Settings
26 */
27#define CONFIG_BFIN_CPU bf537-0.2
28#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER
29
30
31/*
32 * Clock Settings
33 * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
34 * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
35 */
36/* CONFIG_CLKIN_HZ is any value in Hz */
37#define CONFIG_CLKIN_HZ 22118400
38/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
39/* 1 = CLKIN / 2 */
40#define CONFIG_CLKIN_HALF 0
41/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
42/* 1 = bypass PLL */
43#define CONFIG_PLL_BYPASS 0
44/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
45/* Values can range from 0-63 (where 0 means 64) */
46#define CONFIG_VCO_MULT 20
47/* CCLK_DIV controls the core clock divider */
48/* Values can be 1, 2, 4, or 8 ONLY */
49#define CONFIG_CCLK_DIV 1
50/* SCLK_DIV controls the system clock divider */
51/* Values can range from 1-15 */
52#define CONFIG_SCLK_DIV 5
53
54
55/*
56 * Memory Settings
57 */
58#define CONFIG_MEM_SIZE 32
59#define CONFIG_MEM_ADD_WDTH 9
60
61#define CONFIG_EBIU_SDRRC_VAL 0x2ac
62#define CONFIG_EBIU_SDGCTL_VAL 0x91110d
63
64#define CONFIG_EBIU_AMGCTL_VAL 0xFF
65#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
66#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
67
68#define CONFIG_SYS_MONITOR_LEN (256 << 10)
69#define CONFIG_SYS_MALLOC_LEN (384 << 10)
70
71
72/*
73 * Network Settings
74 */
75#ifndef __ADSPBF534__
76#define CONFIG_BFIN_MAC
77#define CONFIG_NETCONSOLE 1
78#define CONFIG_NET_MULTI 1
79#endif
80#ifdef CONFIG_BFIN_MAC
81#define CONFIG_IPADDR 192.168.0.15
82#define CONFIG_NETMASK 255.255.255.0
83#define CONFIG_GATEWAYIP 192.168.0.1
84#define CONFIG_SERVERIP 192.168.0.2
85#define CONFIG_HOSTNAME bf537-srv1
86#endif
87
88#define CONFIG_SYS_AUTOLOAD "no"
89#define CONFIG_ROOTPATH /romfs
Mike Frysinger8d1fea22009-07-16 19:05:30 -040090/* Uncomment next line to use fixed MAC address */
91/* #define CONFIG_ETHADDR 02:80:ad:20:31:42 */
Mike Frysinger59ac9722008-10-12 23:22:25 -040092
93
94/*
95 * Flash Settings
96 */
97/* We don't have a parallel flash chip there */
98#define CONFIG_SYS_NO_FLASH
99
100
101/*
102 * SPI Settings
103 */
104#define CONFIG_BFIN_SPI
105#define CONFIG_ENV_SPI_MAX_HZ 30000000
Mike Frysingerafac8b02009-06-14 22:29:35 -0400106#define CONFIG_SF_DEFAULT_SPEED 30000000
Mike Frysinger59ac9722008-10-12 23:22:25 -0400107#define CONFIG_SPI_FLASH
108#define CONFIG_SPI_FLASH_STMICRO
109
110
111/*
112 * Env Storage Settings
113 */
114#define CONFIG_ENV_IS_IN_SPI_FLASH
115#define CONFIG_ENV_OFFSET 0x10000
116#define CONFIG_ENV_SIZE 0x10000
117#define CONFIG_ENV_SECT_SIZE 0x10000
118#define ENV_IS_EMBEDDED_CUSTOM
119
120
121/*
122 * I2C settings
123 */
124#define CONFIG_BFIN_TWI_I2C 1
125#define CONFIG_HARD_I2C 1
126#define CONFIG_SYS_I2C_SPEED 50000
127#define CONFIG_SYS_I2C_SLAVE 0
128
129
130/*
131 * Misc Settings
132 */
133#define CONFIG_SYS_LONGHELP 1
134#define CONFIG_CMDLINE_EDITING 1
135#define CONFIG_ENV_OVERWRITE 1
136#define CONFIG_MISC_INIT_R
137
138#define CONFIG_BAUDRATE 115200
139#define CONFIG_UART_CONSOLE 0
140
141#define CONFIG_PANIC_HANG 1
142#define CONFIG_RTC_BFIN 1
143#define CONFIG_BOOT_RETRY_TIME -1
144#define CONFIG_LOADS_ECHO 1
145
146#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
147# define CONFIG_BOOTDELAY -1
148#else
149# define CONFIG_BOOTDELAY 5
150#endif
151
152#include <config_cmd_default.h>
153
154#ifdef CONFIG_BFIN_MAC
155# define CONFIG_CMD_DHCP
156# define CONFIG_CMD_PING
157#else
158# undef CONFIG_CMD_NET
159#endif
160
161#define CONFIG_CMD_BOOTLDR
162#define CONFIG_CMD_CACHE
163#define CONFIG_CMD_DATE
164#define CONFIG_CMD_ELF
165#undef CONFIG_CMD_FLASH
166#define CONFIG_CMD_I2C
167#undef CONFIG_CMD_IMLS
168#define CONFIG_CMD_SF
169
170#define CONFIG_BOOTCOMMAND "run flashboot"
171#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw"
172#define CONFIG_SYS_PROMPT "srv1> "
173
174#define BOOT_ENV_SETTINGS \
175 "update=tftpboot $(loadaddr) u-boot.ldr;" \
176 "sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
177 "sf erase 0 0x30000;" \
178 "sf write $(loadaddr) 0 $(filesize)" \
179 "flashboot=sf read 0x1000000 0x30000 0x320000;" \
180 "bootm 0x1000000\0"
181#ifdef CONFIG_BFIN_MAC
182# define NETWORK_ENV_SETTINGS \
183 "nfsargs=setenv bootargs root=/dev/nfs rw " \
184 "nfsroot=$(serverip):$(rootpath)\0" \
185 "addip=setenv bootargs $(bootargs) " \
186 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
187 ":$(hostname):eth0:off\0" \
188 "ramboot=tftpboot $(loadaddr) linux;" \
189 "run ramargs;run addip;bootelf\0" \
190 "nfsboot=tftpboot $(loadaddr) linux;" \
191 "run nfsargs;run addip;bootelf\0"
192#else
193# define NETWORK_ENV_SETTINGS
194#endif
195#define CONFIG_EXTRA_ENV_SETTINGS \
196 NETWORK_ENV_SETTINGS \
197 "ramargs=setenv bootargs " CONFIG_BOOTARGS "\0" \
198 BOOT_ENV_SETTINGS
199
Mike Frysinger59ac9722008-10-12 23:22:25 -0400200#endif