blob: 5b4c489f4b1a901dc161dec46cde5024d59c3f9e [file] [log] [blame]
Simon Glass9a7210f2019-01-11 18:37:09 -07001// SPDX-License-Identifier: GPL-2.0+
2/*
3 * max98088.c -- MAX98088 ALSA SoC Audio driver
4 *
5 * Copyright 2010 Maxim Integrated Products
6 *
7 * Modified for U-Boot by Chih-Chung Chang (chihchung@chromium.org),
8 * following the changes made in max98095.c
9 */
10
11#include <common.h>
12#include <audio_codec.h>
13#include <div64.h>
14#include <dm.h>
15#include <i2c.h>
16#include <i2s.h>
Simon Glassf7ae49f2020-05-10 11:40:05 -060017#include <log.h>
Simon Glass9a7210f2019-01-11 18:37:09 -070018#include <sound.h>
19#include <asm/gpio.h>
Simon Glass9a7210f2019-01-11 18:37:09 -070020#include "maxim_codec.h"
21#include "max98088.h"
22
23/* codec mclk clock divider coefficients. Index 0 is reserved. */
24static const int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000,
25 44100, 48000, 88200, 96000};
26
27/*
28 * codec mclk clock divider coefficients based on sampling rate
29 *
30 * @param rate sampling rate
31 * @param value address of indexvalue to be stored
32 *
33 * @return 0 for success or negative error code.
34 */
35static int rate_value(int rate, u8 *value)
36{
37 int i;
38
39 for (i = 1; i < ARRAY_SIZE(rate_table); i++) {
40 if (rate_table[i] >= rate) {
41 *value = i;
42 return 0;
43 }
44 }
45 *value = 1;
46
47 return -EINVAL;
48}
49
50/*
51 * Sets hw params for max98088
52 *
53 * @priv: max98088 information pointer
54 * @rate: Sampling rate
55 * @bits_per_sample: Bits per sample
56 *
57 * @return -EIO for error, 0 for success.
58 */
59int max98088_hw_params(struct maxim_priv *priv, unsigned int rate,
60 unsigned int bits_per_sample)
61{
62 int error;
63 u8 regval;
64
65 switch (bits_per_sample) {
66 case 16:
67 error = maxim_bic_or(priv, M98088_REG_DAI1_FORMAT,
68 M98088_DAI_WS, 0);
69 break;
70 case 24:
71 error = maxim_bic_or(priv, M98088_REG_DAI1_FORMAT,
72 M98088_DAI_WS, M98088_DAI_WS);
73 break;
74 default:
75 debug("%s: Illegal bits per sample %d.\n",
76 __func__, bits_per_sample);
77 return -EINVAL;
78 }
79
80 error |= maxim_bic_or(priv, M98088_REG_PWR_SYS, M98088_SHDNRUN, 0);
81
82 if (rate_value(rate, &regval)) {
83 debug("%s: Failed to set sample rate to %d.\n",
84 __func__, rate);
85 return -EIO;
86 }
87
88 error |= maxim_bic_or(priv, M98088_REG_DAI1_CLKMODE,
89 M98088_CLKMODE_MASK, regval << 4);
90 priv->rate = rate;
91
92 /* Update sample rate mode */
93 if (rate < 50000)
94 error |= maxim_bic_or(priv, M98088_REG_DAI1_FILTERS,
95 M98088_DAI_DHF, 0);
96 else
97 error |= maxim_bic_or(priv, M98088_REG_DAI1_FILTERS,
98 M98088_DAI_DHF, M98088_DAI_DHF);
99
100 error |= maxim_bic_or(priv, M98088_REG_PWR_SYS, M98088_SHDNRUN,
101 M98088_SHDNRUN);
102
103 if (error < 0) {
104 debug("%s: Error setting hardware params.\n", __func__);
105 return -EIO;
106 }
107 priv->rate = rate;
108
109 return 0;
110}
111
112/*
113 * Configures Audio interface system clock for the given frequency
114 *
115 * @priv: max98088 information
116 * @freq: Sampling frequency in Hz
117 *
118 * @return -EIO for error, 0 for success.
119 */
120int max98088_set_sysclk(struct maxim_priv *priv, unsigned int freq)
121{
122 int error = 0;
123 u8 pwr;
124
125 /* Requested clock frequency is already setup */
126 if (freq == priv->sysclk)
127 return 0;
128
129 /*
130 * Setup clocks for slave mode, and using the PLL
131 * PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
132 * 0x02 (when master clk is 20MHz to 30MHz)..
133 */
134 if (freq >= 10000000 && freq < 20000000) {
135 error = maxim_i2c_write(priv, M98088_REG_SYS_CLK, 0x10);
136 } else if ((freq >= 20000000) && (freq < 30000000)) {
137 error = maxim_i2c_write(priv, M98088_REG_SYS_CLK, 0x20);
138 } else {
139 debug("%s: Invalid master clock frequency\n", __func__);
140 return -EIO;
141 }
142
143 error |= maxim_i2c_read(priv, M98088_REG_PWR_SYS, &pwr);
144 if (pwr & M98088_SHDNRUN) {
145 error |= maxim_bic_or(priv, M98088_REG_PWR_SYS,
146 M98088_SHDNRUN, 0);
147 error |= maxim_bic_or(priv, M98088_REG_PWR_SYS,
148 M98088_SHDNRUN, M98088_SHDNRUN);
149 }
150
151 debug("%s: Clock at %uHz\n", __func__, freq);
152 if (error < 0)
153 return -EIO;
154
155 priv->sysclk = freq;
156
157 return 0;
158}
159
160/*
161 * Sets Max98090 I2S format
162 *
163 * @priv: max98088 information
164 * @fmt: i2S format - supports a subset of the options defined in i2s.h.
165 *
166 * @return -EIO for error, 0 for success.
167 */
168int max98088_set_fmt(struct maxim_priv *priv, int fmt)
169{
170 u8 reg15val;
171 u8 reg14val = 0;
172 int error = 0;
173
174 if (fmt == priv->fmt)
175 return 0;
176
177 priv->fmt = fmt;
178
179 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
180 case SND_SOC_DAIFMT_CBS_CFS:
181 /* Slave mode PLL */
182 error |= maxim_i2c_write(priv, M98088_REG_DAI1_CLKCFG_HI,
183 0x80);
184 error |= maxim_i2c_write(priv, M98088_REG_DAI1_CLKCFG_LO,
185 0x00);
186 break;
187 case SND_SOC_DAIFMT_CBM_CFM:
188 /* Set to master mode */
189 reg14val |= M98088_DAI_MAS;
190 break;
191 case SND_SOC_DAIFMT_CBS_CFM:
192 case SND_SOC_DAIFMT_CBM_CFS:
193 default:
194 debug("%s: Clock mode unsupported\n", __func__);
195 return -EINVAL;
196 }
197
198 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
199 case SND_SOC_DAIFMT_I2S:
200 reg14val |= M98088_DAI_DLY;
201 break;
202 case SND_SOC_DAIFMT_LEFT_J:
203 break;
204 default:
205 debug("%s: Unrecognized format.\n", __func__);
206 return -EINVAL;
207 }
208
209 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
210 case SND_SOC_DAIFMT_NB_NF:
211 break;
212 case SND_SOC_DAIFMT_NB_IF:
213 reg14val |= M98088_DAI_WCI;
214 break;
215 case SND_SOC_DAIFMT_IB_NF:
216 reg14val |= M98088_DAI_BCI;
217 break;
218 case SND_SOC_DAIFMT_IB_IF:
219 reg14val |= M98088_DAI_BCI | M98088_DAI_WCI;
220 break;
221 default:
222 debug("%s: Unrecognized inversion settings.\n", __func__);
223 return -EINVAL;
224 }
225
226 error |= maxim_bic_or(priv, M98088_REG_DAI1_FORMAT,
227 M98088_DAI_MAS | M98088_DAI_DLY | M98088_DAI_BCI |
228 M98088_DAI_WCI, reg14val);
229 reg15val = M98088_DAI_BSEL64;
230 error |= maxim_i2c_write(priv, M98088_REG_DAI1_CLOCK, reg15val);
231
232 if (error < 0) {
233 debug("%s: Error setting i2s format.\n", __func__);
234 return -EIO;
235 }
236
237 return 0;
238}
239
240/*
241 * max98088_reset() - reset the audio codec
242 *
243 * @priv: max98088 information
244 * @return -EIO for error, 0 for success.
245 */
246static int max98088_reset(struct maxim_priv *priv)
247{
248 int ret, i;
249 u8 val;
250
251 /*
252 * Reset to hardware default for registers, as there is not a soft
253 * reset hardware control register.
254 */
255 for (i = M98088_REG_IRQ_ENABLE; i <= M98088_REG_PWR_SYS; i++) {
256 switch (i) {
257 case M98088_REG_BIAS_CNTL:
258 val = 0xf0;
259 break;
260 case M98088_REG_DAC_BIAS2:
261 val = 0x0f;
262 break;
263 default:
264 val = 0;
265 }
266 ret = maxim_i2c_write(priv, i, val);
267 if (ret < 0) {
268 debug("%s: Failed to reset: %d\n", __func__, ret);
269 return ret;
270 }
271 }
272
273 return 0;
274}
275
276/**
277 * max98088_device_init() - Initialise max98088 codec device
278 *
279 * @priv: max98088 information
280 *
281 * @return -EIO for error, 0 for success.
282 */
283static int max98088_device_init(struct maxim_priv *priv)
284{
285 unsigned char id;
286 int error = 0;
287
Simon Glass9a7210f2019-01-11 18:37:09 -0700288 /* reset the codec, the DSP core, and disable all interrupts */
289 error = max98088_reset(priv);
290 if (error != 0) {
291 debug("Reset\n");
292 return error;
293 }
294
295 /* initialize private data */
296 priv->sysclk = -1U;
297 priv->rate = -1U;
298 priv->fmt = -1U;
299
300 error = maxim_i2c_read(priv, M98088_REG_REV_ID, &id);
301 if (error < 0) {
302 debug("%s: Failure reading hardware revision: %d\n",
303 __func__, id);
304 return -EIO;
305 }
306 debug("%s: Hardware revision: %d\n", __func__, id);
307
308 return 0;
309}
310
311static int max98088_setup_interface(struct maxim_priv *priv)
312{
313 int error;
314
315 /* Reading interrupt status to clear them */
316 error = maxim_i2c_write(priv, M98088_REG_PWR_SYS, M98088_PWRSV);
317 error |= maxim_i2c_write(priv, M98088_REG_IRQ_ENABLE, 0x00);
318
319 /*
320 * initialize registers to hardware default configuring audio
321 * interface2 to DAI1
322 */
323 error |= maxim_i2c_write(priv, M98088_REG_MIX_DAC,
324 M98088_DAI1L_TO_DACL | M98088_DAI1R_TO_DACR);
325 error |= maxim_i2c_write(priv, M98088_REG_BIAS_CNTL, 0xF0);
326 error |= maxim_i2c_write(priv, M98088_REG_DAC_BIAS2, 0x0F);
327 error |= maxim_i2c_write(priv, M98088_REG_DAI1_IOCFG,
328 M98088_S2NORMAL | M98088_SDATA);
329
330 /*
331 * route DACL and DACR output to headphone and speakers
332 * Ordering: DACL, DACR, DACL, DACR
333 */
334 error |= maxim_i2c_write(priv, M98088_REG_MIX_SPK_LEFT, 1);
335 error |= maxim_i2c_write(priv, M98088_REG_MIX_SPK_RIGHT, 1);
336 error |= maxim_i2c_write(priv, M98088_REG_MIX_HP_LEFT, 1);
337 error |= maxim_i2c_write(priv, M98088_REG_MIX_HP_RIGHT, 1);
338
339 /* set volume: -12db */
340 error |= maxim_i2c_write(priv, M98088_REG_LVL_SPK_L, 0x0f);
341 error |= maxim_i2c_write(priv, M98088_REG_LVL_SPK_R, 0x0f);
342
343 /* set volume: -22db */
344 error |= maxim_i2c_write(priv, M98088_REG_LVL_HP_L, 0x0d);
345 error |= maxim_i2c_write(priv, M98088_REG_LVL_HP_R, 0x0d);
346
347 /* power enable */
348 error |= maxim_i2c_write(priv, M98088_REG_PWR_EN_OUT,
349 M98088_HPLEN | M98088_HPREN | M98088_SPLEN |
350 M98088_SPREN | M98088_DALEN | M98088_DAREN);
351 if (error < 0)
352 return -EIO;
353
354 return 0;
355}
356
357static int max98088_do_init(struct maxim_priv *priv, int sampling_rate,
358 int mclk_freq, int bits_per_sample)
359{
360 int ret = 0;
361
362 ret = max98088_setup_interface(priv);
363 if (ret < 0) {
364 debug("%s: max98088 setup interface failed\n", __func__);
365 return ret;
366 }
367
368 ret = max98088_set_sysclk(priv, mclk_freq);
369 if (ret < 0) {
370 debug("%s: max98088 codec set sys clock failed\n", __func__);
371 return ret;
372 }
373
374 ret = max98088_hw_params(priv, sampling_rate, bits_per_sample);
375
376 if (ret == 0) {
377 ret = max98088_set_fmt(priv, SND_SOC_DAIFMT_I2S |
378 SND_SOC_DAIFMT_NB_NF |
379 SND_SOC_DAIFMT_CBS_CFS);
380 }
381
382 return ret;
383}
384
385static int max98088_set_params(struct udevice *dev, int interface, int rate,
386 int mclk_freq, int bits_per_sample,
387 uint channels)
388{
389 struct maxim_priv *priv = dev_get_priv(dev);
390
391 return max98088_do_init(priv, rate, mclk_freq, bits_per_sample);
392}
393
394static int max98088_probe(struct udevice *dev)
395{
396 struct maxim_priv *priv = dev_get_priv(dev);
397 int ret;
398
399 priv->dev = dev;
400 ret = max98088_device_init(priv);
401 if (ret < 0) {
402 debug("%s: max98088 codec chip init failed\n", __func__);
403 return ret;
404 }
405
406 return 0;
407}
408
409static const struct audio_codec_ops max98088_ops = {
410 .set_params = max98088_set_params,
411};
412
413static const struct udevice_id max98088_ids[] = {
414 { .compatible = "maxim,max98088" },
415 { }
416};
417
418U_BOOT_DRIVER(max98088) = {
419 .name = "max98088",
420 .id = UCLASS_AUDIO_CODEC,
421 .of_match = max98088_ids,
422 .probe = max98088_probe,
423 .ops = &max98088_ops,
424 .priv_auto_alloc_size = sizeof(struct maxim_priv),
425};