blob: 71cc173fc0fdb9c72ebf965190158def207644c3 [file] [log] [blame]
Masahiro Yamada0b11dbf2015-07-26 02:46:26 +09001#
2# I2C subsystem configuration
3#
4
5menu "I2C support"
6
Masahiro Yamadab6036bc2015-01-13 12:44:35 +09007config DM_I2C
8 bool "Enable Driver Model for I2C drivers"
9 depends on DM
10 help
Przemyslaw Marczak705fcf42015-03-31 18:57:17 +020011 Enable driver model for I2C. The I2C uclass interface: probe, read,
12 write and speed, is implemented with the bus drivers operations,
13 which provide methods for bus setting and data transfer. Each chip
14 device (bus child) info is kept as parent platdata. The interface
15 is defined in include/i2c.h. When i2c bus driver supports the i2c
16 uclass, but the device drivers not, then DM_I2C_COMPAT config can
17 be used as compatibility layer.
Masahiro Yamada26f820f2015-01-13 12:44:36 +090018
Simon Glass4bba9d32015-02-13 12:20:48 -070019config DM_I2C_COMPAT
20 bool "Enable I2C compatibility layer"
21 depends on DM
22 help
23 Enable old-style I2C functions for compatibility with existing code.
24 This option can be enabled as a temporary measure to avoid needing
25 to convert all code for a board in a single commit. It should not
26 be enabled for any board in an official release.
27
Simon Glasscc456bd2015-08-03 08:19:23 -060028config I2C_CROS_EC_TUNNEL
29 tristate "Chrome OS EC tunnel I2C bus"
30 depends on CROS_EC
31 help
32 This provides an I2C bus that will tunnel i2c commands through to
33 the other side of the Chrome OS EC to the I2C bus connected there.
34 This will work whatever the interface used to talk to the EC (SPI,
35 I2C or LPC). Some Chromebooks use this when the hardware design
36 does not allow direct access to the main PMIC from the AP.
37
Simon Glassf48eaf02015-08-03 08:19:24 -060038config I2C_CROS_EC_LDO
39 bool "Provide access to LDOs on the Chrome OS EC"
40 depends on CROS_EC
41 ---help---
42 On many Chromebooks the main PMIC is inaccessible to the AP. This is
43 often dealt with by using an I2C pass-through interface provided by
44 the EC. On some unfortunate models (e.g. Spring) the pass-through
45 is not available, and an LDO message is available instead. This
46 option enables a driver which provides very basic access to those
47 regulators, via the EC. We implement this as an I2C bus which
48 emulates just the TPS65090 messages we know about. This is done to
49 avoid duplicating the logic in the TPS65090 regulator driver for
50 enabling/disabling an LDO.
Simon Glasscc456bd2015-08-03 08:19:23 -060051
Przemyslaw Marczakc54473c2015-03-31 18:57:18 +020052config DM_I2C_GPIO
53 bool "Enable Driver Model for software emulated I2C bus driver"
54 depends on DM_I2C && DM_GPIO
55 help
56 Enable the i2c bus driver emulation by using the GPIOs. The bus GPIO
57 configuration is given by the device tree. Kernel-style device tree
58 bindings are supported.
59 Binding info: doc/device-tree-bindings/i2c/i2c-gpio.txt
60
Songjun Wu8800e0f2016-06-20 13:22:38 +080061config SYS_I2C_AT91
62 bool "Atmel I2C driver"
63 depends on DM_I2C && ARCH_AT91
64 help
65 Add support for the Atmel I2C driver. A serious problem is that there
66 is no documented way to issue repeated START conditions for more than
67 two messages, as needed to support combined I2C messages. Use the
68 i2c-gpio driver unless your system can cope with this limitation.
69 Binding info: doc/device-tree-bindings/i2c/i2c-at91.txt
70
mario.six@gdsys.ccdbc82ce2016-04-25 08:31:09 +020071config SYS_I2C_FSL
72 bool "Freescale I2C bus driver"
73 depends on DM_I2C
74 help
75 Add support for Freescale I2C busses as used on MPC8240, MPC8245, and
76 MPC85xx processors.
77
Moritz Fischerfdec2d22015-12-28 09:47:11 -080078config SYS_I2C_CADENCE
79 tristate "Cadence I2C Controller"
80 depends on DM_I2C && (ARCH_ZYNQ || ARM64)
81 help
82 Say yes here to select Cadence I2C Host Controller. This controller is
83 e.g. used by Xilinx Zynq.
84
Stefan Roesee32d0db2016-04-28 09:47:17 +020085config SYS_I2C_DW
86 bool "Designware I2C Controller"
87 default n
88 help
89 Say yes here to select the Designware I2C Host Controller. This
90 controller is used in various SoCs, e.g. the ST SPEAr, Altera
91 SoCFPGA, Synopsys ARC700 and some Intel x86 SoCs.
92
Stefan Roese3a370522016-04-28 09:47:19 +020093config SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED
94 bool "DW I2C Enable Status Register not supported"
95 depends on SYS_I2C_DW && (TARGET_SPEAR300 || TARGET_SPEAR310 || \
96 TARGET_SPEAR320 || TARGET_SPEAR600 || TARGET_X600)
97 default y
98 help
99 Some versions of the Designware I2C controller do not support the
100 enable status register. This config option can be enabled in such
101 cases.
102
Simon Glassabb0b012016-01-17 16:11:44 -0700103config SYS_I2C_INTEL
104 bool "Intel I2C/SMBUS driver"
105 depends on DM_I2C
106 help
107 Add support for the Intel SMBUS driver. So far this driver is just
108 a stub which perhaps some basic init. There is no implementation of
109 the I2C API meaning that any I2C operations will immediately fail
110 for now.
111
Jagan Teki72c8c102016-12-06 00:00:57 +0100112config SYS_I2C_MXC
113 bool "NXP i.MX I2C driver"
114 depends on MX6
115 help
116 Add support for the NXP i.MX I2C driver. This supports upto for bus
117 channels and operating on standard mode upto 100 kbits/s and fast
118 mode upto 400 kbits/s.
119
Simon Glass34374692015-08-30 16:55:39 -0600120config SYS_I2C_ROCKCHIP
121 bool "Rockchip I2C driver"
122 depends on DM_I2C
123 help
124 Add support for the Rockchip I2C driver. This is used with various
125 Rockchip parts such as RK3126, RK3128, RK3036 and RK3288. All chips
126 have several I2C ports and all are provided, controled by the
127 device tree.
128
Simon Glass1174aad2015-03-06 13:19:04 -0700129config SYS_I2C_SANDBOX
130 bool "Sandbox I2C driver"
131 depends on SANDBOX && DM_I2C
132 help
133 Enable I2C support for sandbox. This is an emulation of a real I2C
134 bus. Devices can be attached to the bus using the device tree
135 which specifies the driver to use. As an example, see this device
136 tree fragment from sandbox.dts. It shows that the I2C bus has a
137 single EEPROM at address 0x2c (7-bit address) which is emulated by
138 the driver for "sandbox,i2c-eeprom", which is in
139 drivers/misc/i2c_eeprom_emul.c.
140
141 i2c@0 {
142 #address-cells = <1>;
143 #size-cells = <0>;
144 reg = <0>;
145 compatible = "sandbox,i2c";
146 clock-frequency = <400000>;
147 eeprom@2c {
148 reg = <0x2c>;
149 compatible = "i2c-eeprom";
150 emul {
151 compatible = "sandbox,i2c-eeprom";
152 sandbox,filename = "i2c.bin";
153 sandbox,size = <128>;
154 };
155 };
156 };
157
Jaehoon Chung1d61ad92017-01-09 14:47:52 +0900158config SYS_I2C_S3C24X0
159 bool "Samsung I2C driver"
160 depends on ARCH_EXYNOS4 && DM_I2C
161 help
162 Support for Samsung I2C controller as Samsung SoCs.
Simon Glass1174aad2015-03-06 13:19:04 -0700163
Masahiro Yamada26f820f2015-01-13 12:44:36 +0900164config SYS_I2C_UNIPHIER
165 bool "UniPhier I2C driver"
166 depends on ARCH_UNIPHIER && DM_I2C
167 default y
168 help
Masahiro Yamadab6ef3a32015-05-29 17:30:01 +0900169 Support for UniPhier I2C controller driver. This I2C controller
170 is used on PH1-LD4, PH1-sLD8 or older UniPhier SoCs.
Masahiro Yamada238bd0b2015-01-13 12:44:37 +0900171
172config SYS_I2C_UNIPHIER_F
173 bool "UniPhier FIFO-builtin I2C driver"
174 depends on ARCH_UNIPHIER && DM_I2C
175 default y
176 help
Masahiro Yamadab6ef3a32015-05-29 17:30:01 +0900177 Support for UniPhier FIFO-builtin I2C controller driver.
Masahiro Yamada238bd0b2015-01-13 12:44:37 +0900178 This I2C controller is used on PH1-Pro4 or newer UniPhier SoCs.
Simon Glass3d1957f2015-08-03 08:19:21 -0600179
mario.six@gdsys.cc14a6ff22016-07-21 11:57:10 +0200180config SYS_I2C_MVTWSI
181 bool "Marvell I2C driver"
182 depends on DM_I2C
183 help
184 Support for Marvell I2C controllers as used on the orion5x and
185 kirkwood SoC families.
186
Stephen Warren34f1c9f2016-08-08 11:28:27 -0600187config TEGRA186_BPMP_I2C
188 bool "Enable Tegra186 BPMP-based I2C driver"
189 depends on TEGRA186_BPMP
190 help
191 Support for Tegra I2C controllers managed by the BPMP (Boot and
192 Power Management Processor). On Tegra186, some I2C controllers are
193 directly controlled by the main CPU, whereas others are controlled
194 by the BPMP, and can only be accessed by the main CPU via IPC
195 requests to the BPMP. This driver covers the latter case.
196
Simon Glass3d1957f2015-08-03 08:19:21 -0600197source "drivers/i2c/muxes/Kconfig"
Masahiro Yamada0b11dbf2015-07-26 02:46:26 +0900198
199endmenu