Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 1c547bf732327a22e470722f3adb22ef5ca20227 / . / arch / arm / dts / stm32mp157-pinctrl.dtsi
blob: 85da5926551c608124ae54288c5762d147517aae [file] [log] [blame]
Patrick Delaunaya6743132018-07-09 15:17:19 +0200[diff] [blame]1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
4 * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
5 */
6#include <dt-bindings/pinctrl/stm32-pinfunc.h>
7
8/ {
9 soc {
10 pinctrl: pin-controller@50002000 {
11 #address-cells = <1>;
12 #size-cells = <1>;
13 compatible = "st,stm32mp157-pinctrl";
14 ranges = <0 0x50002000 0xa400>;
15 interrupt-parent = <&exti>;
16 st,syscfg = <&exti 0x60 0xff>;
17 pins-are-numbered;
18
19 gpioa: gpio@50002000 {
20 gpio-controller;
21 #gpio-cells = <2>;
22 interrupt-controller;
23 #interrupt-cells = <2>;
24 reg = <0x0 0x400>;
25 clocks = <&rcc GPIOA>;
26 st,bank-name = "GPIOA";
27 ngpios = <16>;
28 gpio-ranges = <&pinctrl 0 0 16>;
29 };
30
31 gpiob: gpio@50003000 {
32 gpio-controller;
33 #gpio-cells = <2>;
34 interrupt-controller;
35 #interrupt-cells = <2>;
36 reg = <0x1000 0x400>;
37 clocks = <&rcc GPIOB>;
38 st,bank-name = "GPIOB";
39 ngpios = <16>;
40 gpio-ranges = <&pinctrl 0 16 16>;
41 };
42
43 gpioc: gpio@50004000 {
44 gpio-controller;
45 #gpio-cells = <2>;
46 interrupt-controller;
47 #interrupt-cells = <2>;
48 reg = <0x2000 0x400>;
49 clocks = <&rcc GPIOC>;
50 st,bank-name = "GPIOC";
51 ngpios = <16>;
52 gpio-ranges = <&pinctrl 0 32 16>;
53 };
54
55 gpiod: gpio@50005000 {
56 gpio-controller;
57 #gpio-cells = <2>;
58 interrupt-controller;
59 #interrupt-cells = <2>;
60 reg = <0x3000 0x400>;
61 clocks = <&rcc GPIOD>;
62 st,bank-name = "GPIOD";
63 ngpios = <16>;
64 gpio-ranges = <&pinctrl 0 48 16>;
65 };
66
67 gpioe: gpio@50006000 {
68 gpio-controller;
69 #gpio-cells = <2>;
70 interrupt-controller;
71 #interrupt-cells = <2>;
72 reg = <0x4000 0x400>;
73 clocks = <&rcc GPIOE>;
74 st,bank-name = "GPIOE";
75 ngpios = <16>;
76 gpio-ranges = <&pinctrl 0 64 16>;
77 };
78
79 gpiof: gpio@50007000 {
80 gpio-controller;
81 #gpio-cells = <2>;
82 interrupt-controller;
83 #interrupt-cells = <2>;
84 reg = <0x5000 0x400>;
85 clocks = <&rcc GPIOF>;
86 st,bank-name = "GPIOF";
87 ngpios = <16>;
88 gpio-ranges = <&pinctrl 0 80 16>;
89 };
90
91 gpiog: gpio@50008000 {
92 gpio-controller;
93 #gpio-cells = <2>;
94 interrupt-controller;
95 #interrupt-cells = <2>;
96 reg = <0x6000 0x400>;
97 clocks = <&rcc GPIOG>;
98 st,bank-name = "GPIOG";
99 ngpios = <16>;
100 gpio-ranges = <&pinctrl 0 96 16>;
101 };
102
103 gpioh: gpio@50009000 {
104 gpio-controller;
105 #gpio-cells = <2>;
106 interrupt-controller;
107 #interrupt-cells = <2>;
108 reg = <0x7000 0x400>;
109 clocks = <&rcc GPIOH>;
110 st,bank-name = "GPIOH";
111 ngpios = <16>;
112 gpio-ranges = <&pinctrl 0 112 16>;
113 };
114
115 gpioi: gpio@5000a000 {
116 gpio-controller;
117 #gpio-cells = <2>;
118 interrupt-controller;
119 #interrupt-cells = <2>;
120 reg = <0x8000 0x400>;
121 clocks = <&rcc GPIOI>;
122 st,bank-name = "GPIOI";
123 ngpios = <16>;
124 gpio-ranges = <&pinctrl 0 128 16>;
125 };
126
127 gpioj: gpio@5000b000 {
128 gpio-controller;
129 #gpio-cells = <2>;
130 interrupt-controller;
131 #interrupt-cells = <2>;
132 reg = <0x9000 0x400>;
133 clocks = <&rcc GPIOJ>;
134 st,bank-name = "GPIOJ";
135 ngpios = <16>;
136 gpio-ranges = <&pinctrl 0 144 16>;
137 };
138
139 gpiok: gpio@5000c000 {
140 gpio-controller;
141 #gpio-cells = <2>;
142 interrupt-controller;
143 #interrupt-cells = <2>;
144 reg = <0xa000 0x400>;
145 clocks = <&rcc GPIOK>;
146 st,bank-name = "GPIOK";
147 ngpios = <8>;
148 gpio-ranges = <&pinctrl 0 160 8>;
149 };
150
151 cec_pins_a: cec-0 {
152 pins {
153 pinmux = <STM32_PINMUX('A', 15, AF4)>;
154 bias-disable;
155 drive-open-drain;
156 slew-rate = <0>;
157 };
158 };
159
160 i2c1_pins_a: i2c1-0 {
161 pins {
162 pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
163 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
164 bias-disable;
165 drive-open-drain;
166 slew-rate = <0>;
167 };
168 };
169
170 i2c2_pins_a: i2c2-0 {
171 pins {
172 pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
173 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
174 bias-disable;
175 drive-open-drain;
176 slew-rate = <0>;
177 };
178 };
179
180 i2c5_pins_a: i2c5-0 {
181 pins {
182 pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
183 <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
184 bias-disable;
185 drive-open-drain;
186 slew-rate = <0>;
187 };
188 };
189
190 pwm2_pins_a: pwm2-0 {
191 pins {
192 pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
193 bias-pull-down;
194 drive-push-pull;
195 slew-rate = <0>;
196 };
197 };
198
199 pwm8_pins_a: pwm8-0 {
200 pins {
201 pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
202 bias-pull-down;
203 drive-push-pull;
204 slew-rate = <0>;
205 };
206 };
207
208 pwm12_pins_a: pwm12-0 {
209 pins {
210 pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
211 bias-pull-down;
212 drive-push-pull;
213 slew-rate = <0>;
214 };
215 };
216
217 qspi_clk_pins_a: qspi-clk-0 {
218 pins {
219 pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
220 bias-disable;
221 drive-push-pull;
222 slew-rate = <3>;
223 };
224 };
225
226 qspi_bk1_pins_a: qspi-bk1-0 {
227 pins1 {
228 pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
229 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
230 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
231 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
232 bias-disable;
233 drive-push-pull;
234 slew-rate = <3>;
235 };
236 pins2 {
237 pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
238 bias-pull-up;
239 drive-push-pull;
240 slew-rate = <3>;
241 };
242 };
243
244 qspi_bk2_pins_a: qspi-bk2-0 {
245 pins1 {
246 pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
247 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
248 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
249 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
250 bias-disable;
251 drive-push-pull;
252 slew-rate = <3>;
253 };
254 pins2 {
255 pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
256 bias-pull-up;
257 drive-push-pull;
258 slew-rate = <3>;
259 };
260 };
261 sdmmc1_b4_pins_a: sdmmc1-b4@0 {
262 pins {
263 pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
264 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
265 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
266 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
267 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
268 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
269 slew-rate = <3>;
270 drive-push-pull;
271 bias-disable;
272 };
273 };
274
275 sdmmc1_dir_pins_a: sdmmc1-dir@0 {
276 pins {
277 pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
278 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
279 <STM32_PINMUX('B', 9, AF11)>, /* SDMMC1_CDIR */
280 <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
281 slew-rate = <3>;
282 drive-push-pull;
283 bias-pull-up;
284 };
285 };
286 sdmmc2_b4_pins_a: sdmmc2-b4@0 {
287 pins {
288 pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
289 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
290 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
291 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
292 <STM32_PINMUX('E', 3, AF9)>, /* SDMMC2_CK */
293 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
294 slew-rate = <3>;
295 drive-push-pull;
296 bias-pull-up;
297 };
298 };
299
300 sdmmc2_d47_pins_a: sdmmc2-d47@0 {
301 pins {
302 pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
303 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
304 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
305 <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
306 slew-rate = <3>;
307 drive-push-pull;
308 bias-pull-up;
309 };
310 };
311
312 uart4_pins_a: uart4-0 {
313 pins1 {
314 pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
315 bias-disable;
316 drive-push-pull;
317 slew-rate = <0>;
318 };
319 pins2 {
320 pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
321 bias-disable;
322 };
323 };
Patrice Chotard8e9c94d2018-08-10 17:12:11 +0200[diff] [blame]324
325 usbotg_hs_pins_a: usbotg_hs-0 {
326 pins {
327 pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
328 };
329 };
Patrick Delaunaya6743132018-07-09 15:17:19 +0200[diff] [blame]330 };
331
332 pinctrl_z: pin-controller-z@54004000 {
333 #address-cells = <1>;
334 #size-cells = <1>;
335 compatible = "st,stm32mp157-z-pinctrl";
336 ranges = <0 0x54004000 0x400>;
337 pins-are-numbered;
338 interrupt-parent = <&exti>;
339 st,syscfg = <&exti 0x60 0xff>;
340
341 gpioz: gpio@54004000 {
342 gpio-controller;
343 #gpio-cells = <2>;
344 interrupt-controller;
345 #interrupt-cells = <2>;
346 reg = <0 0x400>;
347 clocks = <&rcc GPIOZ>;
348 st,bank-name = "GPIOZ";
349 st,bank-ioport = <11>;
350 ngpios = <8>;
351 gpio-ranges = <&pinctrl_z 0 400 8>;
352 };
353
354 i2c4_pins_a: i2c4-0 {
355 pins {
356 pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
357 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
358 bias-disable;
359 drive-open-drain;
360 slew-rate = <0>;
361 };
362 };
363 };
364 };
365};