TsiChung Liew | 7b7a869 | 2008-08-06 16:08:41 -0500 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2000-2002 |
| 3 | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| 4 | * |
| 5 | * Copyright 2008, Network Appliance Inc. |
| 6 | * Jason McMullan <mcmullan@netapp.com> |
| 7 | * |
| 8 | * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. |
| 9 | * TsiChung Liew (Tsi-Chung.Liew@freescale.com) |
| 10 | * |
| 11 | * See file CREDITS for list of people who contributed to this |
| 12 | * project. |
| 13 | * |
| 14 | * This program is free software; you can redistribute it and/or |
| 15 | * modify it under the terms of the GNU General Public License as |
| 16 | * published by the Free Software Foundation; either version 2 of |
| 17 | * the License, or (at your option) any later version. |
| 18 | * |
| 19 | * This program is distributed in the hope that it will be useful, |
| 20 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 21 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 22 | * GNU General Public License for more details. |
| 23 | * |
| 24 | * You should have received a copy of the GNU General Public License |
| 25 | * along with this program; if not, write to the Free Software |
| 26 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 27 | * MA 02111-1307 USA |
| 28 | */ |
| 29 | |
| 30 | #include <common.h> |
| 31 | #include <malloc.h> |
| 32 | #include <spi_flash.h> |
| 33 | |
| 34 | #include "spi_flash_internal.h" |
| 35 | |
| 36 | /* M25Pxx-specific commands */ |
| 37 | #define CMD_M25PXX_WREN 0x06 /* Write Enable */ |
| 38 | #define CMD_M25PXX_WRDI 0x04 /* Write Disable */ |
| 39 | #define CMD_M25PXX_RDSR 0x05 /* Read Status Register */ |
| 40 | #define CMD_M25PXX_WRSR 0x01 /* Write Status Register */ |
| 41 | #define CMD_M25PXX_READ 0x03 /* Read Data Bytes */ |
| 42 | #define CMD_M25PXX_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */ |
| 43 | #define CMD_M25PXX_PP 0x02 /* Page Program */ |
| 44 | #define CMD_M25PXX_SE 0xd8 /* Sector Erase */ |
| 45 | #define CMD_M25PXX_BE 0xc7 /* Bulk Erase */ |
| 46 | #define CMD_M25PXX_DP 0xb9 /* Deep Power-down */ |
| 47 | #define CMD_M25PXX_RES 0xab /* Release from DP, and Read Signature */ |
| 48 | |
| 49 | #define STM_ID_M25P16 0x15 |
| 50 | #define STM_ID_M25P20 0x12 |
| 51 | #define STM_ID_M25P32 0x16 |
| 52 | #define STM_ID_M25P40 0x13 |
| 53 | #define STM_ID_M25P64 0x17 |
| 54 | #define STM_ID_M25P80 0x14 |
| 55 | #define STM_ID_M25P128 0x18 |
| 56 | |
| 57 | #define STMICRO_SR_WIP (1 << 0) /* Write-in-Progress */ |
| 58 | |
| 59 | struct stmicro_spi_flash_params { |
| 60 | u8 idcode1; |
| 61 | u16 page_size; |
| 62 | u16 pages_per_sector; |
| 63 | u16 nr_sectors; |
| 64 | const char *name; |
| 65 | }; |
| 66 | |
Brad Bozarth | 68f8718 | 2009-01-01 22:45:47 -0500 | [diff] [blame] | 67 | /* spi_flash needs to be first so upper layers can free() it */ |
TsiChung Liew | 7b7a869 | 2008-08-06 16:08:41 -0500 | [diff] [blame] | 68 | struct stmicro_spi_flash { |
TsiChung Liew | 7b7a869 | 2008-08-06 16:08:41 -0500 | [diff] [blame] | 69 | struct spi_flash flash; |
Brad Bozarth | 68f8718 | 2009-01-01 22:45:47 -0500 | [diff] [blame] | 70 | const struct stmicro_spi_flash_params *params; |
TsiChung Liew | 7b7a869 | 2008-08-06 16:08:41 -0500 | [diff] [blame] | 71 | }; |
| 72 | |
| 73 | static inline struct stmicro_spi_flash *to_stmicro_spi_flash(struct spi_flash |
| 74 | *flash) |
| 75 | { |
| 76 | return container_of(flash, struct stmicro_spi_flash, flash); |
| 77 | } |
| 78 | |
| 79 | static const struct stmicro_spi_flash_params stmicro_spi_flash_table[] = { |
| 80 | { |
| 81 | .idcode1 = STM_ID_M25P16, |
| 82 | .page_size = 256, |
| 83 | .pages_per_sector = 256, |
| 84 | .nr_sectors = 32, |
| 85 | .name = "M25P16", |
| 86 | }, |
| 87 | { |
| 88 | .idcode1 = STM_ID_M25P20, |
| 89 | .page_size = 256, |
| 90 | .pages_per_sector = 256, |
| 91 | .nr_sectors = 4, |
| 92 | .name = "M25P20", |
| 93 | }, |
| 94 | { |
| 95 | .idcode1 = STM_ID_M25P32, |
| 96 | .page_size = 256, |
| 97 | .pages_per_sector = 256, |
| 98 | .nr_sectors = 64, |
| 99 | .name = "M25P32", |
| 100 | }, |
| 101 | { |
| 102 | .idcode1 = STM_ID_M25P40, |
| 103 | .page_size = 256, |
| 104 | .pages_per_sector = 256, |
| 105 | .nr_sectors = 8, |
| 106 | .name = "M25P40", |
| 107 | }, |
| 108 | { |
| 109 | .idcode1 = STM_ID_M25P64, |
| 110 | .page_size = 256, |
| 111 | .pages_per_sector = 256, |
| 112 | .nr_sectors = 128, |
| 113 | .name = "M25P64", |
| 114 | }, |
| 115 | { |
| 116 | .idcode1 = STM_ID_M25P80, |
| 117 | .page_size = 256, |
| 118 | .pages_per_sector = 256, |
| 119 | .nr_sectors = 16, |
| 120 | .name = "M25P80", |
| 121 | }, |
| 122 | { |
| 123 | .idcode1 = STM_ID_M25P128, |
| 124 | .page_size = 256, |
| 125 | .pages_per_sector = 1024, |
| 126 | .nr_sectors = 64, |
| 127 | .name = "M25P128", |
| 128 | }, |
| 129 | }; |
| 130 | |
| 131 | static int stmicro_wait_ready(struct spi_flash *flash, unsigned long timeout) |
| 132 | { |
| 133 | struct spi_slave *spi = flash->spi; |
| 134 | unsigned long timebase; |
| 135 | int ret; |
| 136 | u8 status; |
| 137 | u8 cmd[4] = { CMD_M25PXX_RDSR, 0xff, 0xff, 0xff }; |
| 138 | |
| 139 | ret = spi_xfer(spi, 32, &cmd[0], NULL, SPI_XFER_BEGIN); |
| 140 | if (ret) { |
Mike Frysinger | 84bc72d | 2008-12-11 18:39:08 -0500 | [diff] [blame] | 141 | debug("SF: Failed to send command %02x: %d\n", cmd[0], ret); |
TsiChung Liew | 7b7a869 | 2008-08-06 16:08:41 -0500 | [diff] [blame] | 142 | return ret; |
| 143 | } |
| 144 | |
| 145 | timebase = get_timer(0); |
| 146 | do { |
| 147 | ret = spi_xfer(spi, 8, NULL, &status, 0); |
| 148 | if (ret) |
| 149 | return -1; |
| 150 | |
| 151 | if ((status & STMICRO_SR_WIP) == 0) |
| 152 | break; |
| 153 | |
| 154 | } while (get_timer(timebase) < timeout); |
| 155 | |
| 156 | spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END); |
| 157 | |
| 158 | if ((status & STMICRO_SR_WIP) == 0) |
| 159 | return 0; |
| 160 | |
| 161 | /* Timed out */ |
| 162 | return -1; |
| 163 | } |
| 164 | |
| 165 | static int stmicro_read_fast(struct spi_flash *flash, |
| 166 | u32 offset, size_t len, void *buf) |
| 167 | { |
| 168 | struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash); |
| 169 | unsigned long page_addr; |
| 170 | unsigned long page_size; |
| 171 | u8 cmd[5]; |
| 172 | |
| 173 | page_size = stm->params->page_size; |
| 174 | page_addr = offset / page_size; |
| 175 | |
| 176 | cmd[0] = CMD_READ_ARRAY_FAST; |
| 177 | cmd[1] = page_addr >> 8; |
| 178 | cmd[2] = page_addr; |
| 179 | cmd[3] = offset % page_size; |
| 180 | cmd[4] = 0x00; |
| 181 | |
| 182 | return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len); |
| 183 | } |
| 184 | |
| 185 | static int stmicro_write(struct spi_flash *flash, |
| 186 | u32 offset, size_t len, const void *buf) |
| 187 | { |
| 188 | struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash); |
| 189 | unsigned long page_addr; |
| 190 | unsigned long byte_addr; |
| 191 | unsigned long page_size; |
| 192 | size_t chunk_len; |
| 193 | size_t actual; |
| 194 | int ret; |
| 195 | u8 cmd[4]; |
| 196 | |
| 197 | page_size = stm->params->page_size; |
| 198 | page_addr = offset / page_size; |
| 199 | byte_addr = offset % page_size; |
| 200 | |
| 201 | ret = spi_claim_bus(flash->spi); |
| 202 | if (ret) { |
| 203 | debug("SF: Unable to claim SPI bus\n"); |
| 204 | return ret; |
| 205 | } |
| 206 | |
| 207 | ret = 0; |
| 208 | for (actual = 0; actual < len; actual += chunk_len) { |
| 209 | chunk_len = min(len - actual, page_size - byte_addr); |
| 210 | |
| 211 | cmd[0] = CMD_M25PXX_PP; |
| 212 | cmd[1] = page_addr >> 8; |
| 213 | cmd[2] = page_addr; |
| 214 | cmd[3] = byte_addr; |
| 215 | |
| 216 | debug |
| 217 | ("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %d\n", |
| 218 | buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len); |
| 219 | |
| 220 | ret = spi_flash_cmd(flash->spi, CMD_M25PXX_WREN, NULL, 0); |
| 221 | if (ret < 0) { |
| 222 | debug("SF: Enabling Write failed\n"); |
| 223 | break; |
| 224 | } |
| 225 | |
| 226 | ret = spi_flash_cmd_write(flash->spi, cmd, 4, |
| 227 | buf + actual, chunk_len); |
| 228 | if (ret < 0) { |
| 229 | debug("SF: STMicro Page Program failed\n"); |
| 230 | break; |
| 231 | } |
| 232 | |
| 233 | ret = stmicro_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); |
| 234 | if (ret < 0) { |
| 235 | debug("SF: STMicro page programming timed out\n"); |
| 236 | break; |
| 237 | } |
| 238 | |
| 239 | page_addr++; |
| 240 | byte_addr = 0; |
| 241 | } |
| 242 | |
| 243 | debug("SF: STMicro: Successfully programmed %u bytes @ 0x%x\n", |
| 244 | len, offset); |
| 245 | |
| 246 | spi_release_bus(flash->spi); |
| 247 | return ret; |
| 248 | } |
| 249 | |
| 250 | int stmicro_erase(struct spi_flash *flash, u32 offset, size_t len) |
| 251 | { |
| 252 | struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash); |
| 253 | unsigned long sector_size; |
| 254 | size_t actual; |
| 255 | int ret; |
| 256 | u8 cmd[4]; |
| 257 | |
| 258 | /* |
| 259 | * This function currently uses sector erase only. |
| 260 | * probably speed things up by using bulk erase |
| 261 | * when possible. |
| 262 | */ |
| 263 | |
| 264 | sector_size = stm->params->page_size * stm->params->pages_per_sector; |
| 265 | |
| 266 | if (offset % sector_size || len % sector_size) { |
| 267 | debug("SF: Erase offset/length not multiple of sector size\n"); |
| 268 | return -1; |
| 269 | } |
| 270 | |
| 271 | len /= sector_size; |
| 272 | cmd[0] = CMD_M25PXX_SE; |
| 273 | cmd[2] = 0x00; |
| 274 | cmd[3] = 0x00; |
| 275 | |
| 276 | ret = spi_claim_bus(flash->spi); |
| 277 | if (ret) { |
| 278 | debug("SF: Unable to claim SPI bus\n"); |
| 279 | return ret; |
| 280 | } |
| 281 | |
| 282 | ret = 0; |
| 283 | for (actual = 0; actual < len; actual++) { |
| 284 | cmd[1] = (offset / sector_size) + actual; |
| 285 | |
| 286 | ret = spi_flash_cmd(flash->spi, CMD_M25PXX_WREN, NULL, 0); |
| 287 | if (ret < 0) { |
| 288 | debug("SF: Enabling Write failed\n"); |
| 289 | break; |
| 290 | } |
| 291 | |
| 292 | ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0); |
| 293 | if (ret < 0) { |
| 294 | debug("SF: STMicro page erase failed\n"); |
| 295 | break; |
| 296 | } |
| 297 | |
| 298 | /* Up to 2 seconds */ |
Jean-Christophe PLAGNIOL-VILLARD | 6d0f6bc | 2008-10-16 15:01:15 +0200 | [diff] [blame] | 299 | ret = stmicro_wait_ready(flash, 2 * CONFIG_SYS_HZ); |
TsiChung Liew | 7b7a869 | 2008-08-06 16:08:41 -0500 | [diff] [blame] | 300 | if (ret < 0) { |
| 301 | debug("SF: STMicro page erase timed out\n"); |
| 302 | break; |
| 303 | } |
| 304 | } |
| 305 | |
| 306 | debug("SF: STMicro: Successfully erased %u bytes @ 0x%x\n", |
| 307 | len * sector_size, offset); |
| 308 | |
| 309 | spi_release_bus(flash->spi); |
| 310 | return ret; |
| 311 | } |
| 312 | |
| 313 | struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 * idcode) |
| 314 | { |
| 315 | const struct stmicro_spi_flash_params *params; |
| 316 | struct stmicro_spi_flash *stm; |
| 317 | unsigned int i; |
| 318 | int ret; |
| 319 | u8 id[3]; |
| 320 | |
| 321 | ret = spi_flash_cmd(spi, CMD_READ_ID, id, sizeof(id)); |
| 322 | if (ret) |
| 323 | return NULL; |
| 324 | |
| 325 | for (i = 0; i < ARRAY_SIZE(stmicro_spi_flash_table); i++) { |
| 326 | params = &stmicro_spi_flash_table[i]; |
| 327 | if (params->idcode1 == idcode[2]) { |
| 328 | break; |
| 329 | } |
| 330 | } |
| 331 | |
| 332 | if (i == ARRAY_SIZE(stmicro_spi_flash_table)) { |
| 333 | debug("SF: Unsupported STMicro ID %02x\n", id[1]); |
| 334 | return NULL; |
| 335 | } |
| 336 | |
| 337 | stm = malloc(sizeof(struct stmicro_spi_flash)); |
| 338 | if (!stm) { |
| 339 | debug("SF: Failed to allocate memory\n"); |
| 340 | return NULL; |
| 341 | } |
| 342 | |
| 343 | stm->params = params; |
| 344 | stm->flash.spi = spi; |
| 345 | stm->flash.name = params->name; |
| 346 | |
| 347 | stm->flash.write = stmicro_write; |
| 348 | stm->flash.erase = stmicro_erase; |
| 349 | stm->flash.read = stmicro_read_fast; |
| 350 | stm->flash.size = params->page_size * params->pages_per_sector |
| 351 | * params->nr_sectors; |
| 352 | |
| 353 | debug("SF: Detected %s with page size %u, total %u bytes\n", |
| 354 | params->name, params->page_size, stm->flash.size); |
| 355 | |
| 356 | return &stm->flash; |
| 357 | } |