blob: 02df809bcfd5bfbe8db614bcd4d346c13335fd0a [file] [log] [blame]
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +09001/*
Masahiro Yamada4e3d8402016-07-19 21:56:13 +09002 * Copyright (C) 2016 Socionext Inc.
3 * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +09004 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#include <common.h>
9#include <clk.h>
10#include <fdtdec.h>
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +090011#include <mmc.h>
12#include <dm/device.h>
13#include <linux/compat.h>
14#include <linux/io.h>
Masahiro Yamada4f805012016-03-24 22:32:42 +090015#include <linux/sizes.h>
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +090016#include <asm/unaligned.h>
17#include <asm/dma-mapping.h>
18
19DECLARE_GLOBAL_DATA_PTR;
20
21#define UNIPHIER_SD_CMD 0x000 /* command */
22#define UNIPHIER_SD_CMD_NOSTOP BIT(14) /* No automatic CMD12 issue */
23#define UNIPHIER_SD_CMD_MULTI BIT(13) /* multiple block transfer */
24#define UNIPHIER_SD_CMD_RD BIT(12) /* 1: read, 0: write */
25#define UNIPHIER_SD_CMD_DATA BIT(11) /* data transfer */
26#define UNIPHIER_SD_CMD_APP BIT(6) /* ACMD preceded by CMD55 */
27#define UNIPHIER_SD_CMD_NORMAL (0 << 8)/* auto-detect of resp-type */
28#define UNIPHIER_SD_CMD_RSP_NONE (3 << 8)/* response: none */
29#define UNIPHIER_SD_CMD_RSP_R1 (4 << 8)/* response: R1, R5, R6, R7 */
30#define UNIPHIER_SD_CMD_RSP_R1B (5 << 8)/* response: R1b, R5b */
31#define UNIPHIER_SD_CMD_RSP_R2 (6 << 8)/* response: R2 */
32#define UNIPHIER_SD_CMD_RSP_R3 (7 << 8)/* response: R3, R4 */
33#define UNIPHIER_SD_ARG 0x008 /* command argument */
34#define UNIPHIER_SD_STOP 0x010 /* stop action control */
35#define UNIPHIER_SD_STOP_SEC BIT(8) /* use sector count */
36#define UNIPHIER_SD_STOP_STP BIT(0) /* issue CMD12 */
37#define UNIPHIER_SD_SECCNT 0x014 /* sector counter */
38#define UNIPHIER_SD_RSP10 0x018 /* response[39:8] */
39#define UNIPHIER_SD_RSP32 0x020 /* response[71:40] */
40#define UNIPHIER_SD_RSP54 0x028 /* response[103:72] */
41#define UNIPHIER_SD_RSP76 0x030 /* response[127:104] */
42#define UNIPHIER_SD_INFO1 0x038 /* IRQ status 1 */
43#define UNIPHIER_SD_INFO1_CD BIT(5) /* state of card detect */
44#define UNIPHIER_SD_INFO1_INSERT BIT(4) /* card inserted */
45#define UNIPHIER_SD_INFO1_REMOVE BIT(3) /* card removed */
46#define UNIPHIER_SD_INFO1_CMP BIT(2) /* data complete */
47#define UNIPHIER_SD_INFO1_RSP BIT(0) /* response complete */
48#define UNIPHIER_SD_INFO2 0x03c /* IRQ status 2 */
49#define UNIPHIER_SD_INFO2_ERR_ILA BIT(15) /* illegal access err */
50#define UNIPHIER_SD_INFO2_CBSY BIT(14) /* command busy */
51#define UNIPHIER_SD_INFO2_BWE BIT(9) /* write buffer ready */
52#define UNIPHIER_SD_INFO2_BRE BIT(8) /* read buffer ready */
53#define UNIPHIER_SD_INFO2_DAT0 BIT(7) /* SDDAT0 */
54#define UNIPHIER_SD_INFO2_ERR_RTO BIT(6) /* response time out */
55#define UNIPHIER_SD_INFO2_ERR_ILR BIT(5) /* illegal read err */
56#define UNIPHIER_SD_INFO2_ERR_ILW BIT(4) /* illegal write err */
57#define UNIPHIER_SD_INFO2_ERR_TO BIT(3) /* time out error */
58#define UNIPHIER_SD_INFO2_ERR_END BIT(2) /* END bit error */
59#define UNIPHIER_SD_INFO2_ERR_CRC BIT(1) /* CRC error */
60#define UNIPHIER_SD_INFO2_ERR_IDX BIT(0) /* cmd index error */
61#define UNIPHIER_SD_INFO1_MASK 0x040
62#define UNIPHIER_SD_INFO2_MASK 0x044
63#define UNIPHIER_SD_CLKCTL 0x048 /* clock divisor */
64#define UNIPHIER_SD_CLKCTL_DIV_MASK 0x104ff
65#define UNIPHIER_SD_CLKCTL_DIV1024 BIT(16) /* SDCLK = CLK / 1024 */
66#define UNIPHIER_SD_CLKCTL_DIV512 BIT(7) /* SDCLK = CLK / 512 */
67#define UNIPHIER_SD_CLKCTL_DIV256 BIT(6) /* SDCLK = CLK / 256 */
68#define UNIPHIER_SD_CLKCTL_DIV128 BIT(5) /* SDCLK = CLK / 128 */
69#define UNIPHIER_SD_CLKCTL_DIV64 BIT(4) /* SDCLK = CLK / 64 */
70#define UNIPHIER_SD_CLKCTL_DIV32 BIT(3) /* SDCLK = CLK / 32 */
71#define UNIPHIER_SD_CLKCTL_DIV16 BIT(2) /* SDCLK = CLK / 16 */
72#define UNIPHIER_SD_CLKCTL_DIV8 BIT(1) /* SDCLK = CLK / 8 */
73#define UNIPHIER_SD_CLKCTL_DIV4 BIT(0) /* SDCLK = CLK / 4 */
74#define UNIPHIER_SD_CLKCTL_DIV2 0 /* SDCLK = CLK / 2 */
75#define UNIPHIER_SD_CLKCTL_DIV1 BIT(10) /* SDCLK = CLK */
76#define UNIPHIER_SD_CLKCTL_OFFEN BIT(9) /* stop SDCLK when unused */
77#define UNIPHIER_SD_CLKCTL_SCLKEN BIT(8) /* SDCLK output enable */
78#define UNIPHIER_SD_SIZE 0x04c /* block size */
79#define UNIPHIER_SD_OPTION 0x050
80#define UNIPHIER_SD_OPTION_WIDTH_MASK (5 << 13)
81#define UNIPHIER_SD_OPTION_WIDTH_1 (4 << 13)
82#define UNIPHIER_SD_OPTION_WIDTH_4 (0 << 13)
83#define UNIPHIER_SD_OPTION_WIDTH_8 (1 << 13)
84#define UNIPHIER_SD_BUF 0x060 /* read/write buffer */
85#define UNIPHIER_SD_EXTMODE 0x1b0
86#define UNIPHIER_SD_EXTMODE_DMA_EN BIT(1) /* transfer 1: DMA, 0: pio */
87#define UNIPHIER_SD_SOFT_RST 0x1c0
88#define UNIPHIER_SD_SOFT_RST_RSTX BIT(0) /* reset deassert */
89#define UNIPHIER_SD_VERSION 0x1c4 /* version register */
90#define UNIPHIER_SD_VERSION_IP 0xff /* IP version */
91#define UNIPHIER_SD_HOST_MODE 0x1c8
92#define UNIPHIER_SD_IF_MODE 0x1cc
93#define UNIPHIER_SD_IF_MODE_DDR BIT(0) /* DDR mode */
94#define UNIPHIER_SD_VOLT 0x1e4 /* voltage switch */
95#define UNIPHIER_SD_VOLT_MASK (3 << 0)
96#define UNIPHIER_SD_VOLT_OFF (0 << 0)
97#define UNIPHIER_SD_VOLT_330 (1 << 0)/* 3.3V signal */
98#define UNIPHIER_SD_VOLT_180 (2 << 0)/* 1.8V signal */
99#define UNIPHIER_SD_DMA_MODE 0x410
100#define UNIPHIER_SD_DMA_MODE_DIR_RD BIT(16) /* 1: from device, 0: to dev */
101#define UNIPHIER_SD_DMA_MODE_ADDR_INC BIT(0) /* 1: address inc, 0: fixed */
102#define UNIPHIER_SD_DMA_CTL 0x414
103#define UNIPHIER_SD_DMA_CTL_START BIT(0) /* start DMA (auto cleared) */
104#define UNIPHIER_SD_DMA_RST 0x418
105#define UNIPHIER_SD_DMA_RST_RD BIT(9)
106#define UNIPHIER_SD_DMA_RST_WR BIT(8)
107#define UNIPHIER_SD_DMA_INFO1 0x420
108#define UNIPHIER_SD_DMA_INFO1_END_RD2 BIT(20) /* DMA from device is complete*/
109#define UNIPHIER_SD_DMA_INFO1_END_RD BIT(17) /* Don't use! Hardware bug */
110#define UNIPHIER_SD_DMA_INFO1_END_WR BIT(16) /* DMA to device is complete */
111#define UNIPHIER_SD_DMA_INFO1_MASK 0x424
112#define UNIPHIER_SD_DMA_INFO2 0x428
113#define UNIPHIER_SD_DMA_INFO2_ERR_RD BIT(17)
114#define UNIPHIER_SD_DMA_INFO2_ERR_WR BIT(16)
115#define UNIPHIER_SD_DMA_INFO2_MASK 0x42c
116#define UNIPHIER_SD_DMA_ADDR_L 0x440
117#define UNIPHIER_SD_DMA_ADDR_H 0x444
118
119/* alignment required by the DMA engine of this controller */
120#define UNIPHIER_SD_DMA_MINALIGN 0x10
121
122struct uniphier_sd_priv {
123 struct mmc_config cfg;
124 struct mmc *mmc;
125 struct udevice *dev;
126 void __iomem *regbase;
127 unsigned long mclk;
128 unsigned int version;
129 u32 caps;
130#define UNIPHIER_SD_CAP_NONREMOVABLE BIT(0) /* Nonremovable e.g. eMMC */
131#define UNIPHIER_SD_CAP_DMA_INTERNAL BIT(1) /* have internal DMA engine */
132#define UNIPHIER_SD_CAP_DIV1024 BIT(2) /* divisor 1024 is available */
133};
134
135static dma_addr_t __dma_map_single(void *ptr, size_t size,
136 enum dma_data_direction dir)
137{
138 unsigned long addr = (unsigned long)ptr;
139
140 if (dir == DMA_FROM_DEVICE)
141 invalidate_dcache_range(addr, addr + size);
142 else
143 flush_dcache_range(addr, addr + size);
144
145 return addr;
146}
147
148static void __dma_unmap_single(dma_addr_t addr, size_t size,
149 enum dma_data_direction dir)
150{
151 if (dir != DMA_TO_DEVICE)
152 invalidate_dcache_range(addr, addr + size);
153}
154
155static int uniphier_sd_check_error(struct uniphier_sd_priv *priv)
156{
157 u32 info2 = readl(priv->regbase + UNIPHIER_SD_INFO2);
158
159 if (info2 & UNIPHIER_SD_INFO2_ERR_RTO) {
160 /*
161 * TIMEOUT must be returned for unsupported command. Do not
162 * display error log since this might be a part of sequence to
163 * distinguish between SD and MMC.
164 */
165 return TIMEOUT;
166 }
167
168 if (info2 & UNIPHIER_SD_INFO2_ERR_TO) {
169 dev_err(priv->dev, "timeout error\n");
170 return -ETIMEDOUT;
171 }
172
173 if (info2 & (UNIPHIER_SD_INFO2_ERR_END | UNIPHIER_SD_INFO2_ERR_CRC |
174 UNIPHIER_SD_INFO2_ERR_IDX)) {
175 dev_err(priv->dev, "communication out of sync\n");
176 return -EILSEQ;
177 }
178
179 if (info2 & (UNIPHIER_SD_INFO2_ERR_ILA | UNIPHIER_SD_INFO2_ERR_ILR |
180 UNIPHIER_SD_INFO2_ERR_ILW)) {
181 dev_err(priv->dev, "illegal access\n");
182 return -EIO;
183 }
184
185 return 0;
186}
187
188static int uniphier_sd_wait_for_irq(struct uniphier_sd_priv *priv,
189 unsigned int reg, u32 flag)
190{
191 long wait = 1000000;
192 int ret;
193
194 while (!(readl(priv->regbase + reg) & flag)) {
195 if (wait-- < 0) {
196 dev_err(priv->dev, "timeout\n");
197 return -ETIMEDOUT;
198 }
199
200 ret = uniphier_sd_check_error(priv);
201 if (ret)
202 return ret;
203
204 udelay(1);
205 }
206
207 return 0;
208}
209
210static int uniphier_sd_pio_read_one_block(struct mmc *mmc, u32 **pbuf,
211 uint blocksize)
212{
213 struct uniphier_sd_priv *priv = mmc->priv;
214 int i, ret;
215
216 /* wait until the buffer is filled with data */
217 ret = uniphier_sd_wait_for_irq(priv, UNIPHIER_SD_INFO2,
218 UNIPHIER_SD_INFO2_BRE);
219 if (ret)
220 return ret;
221
222 /*
223 * Clear the status flag _before_ read the buffer out because
224 * UNIPHIER_SD_INFO2_BRE is edge-triggered, not level-triggered.
225 */
226 writel(0, priv->regbase + UNIPHIER_SD_INFO2);
227
228 if (likely(IS_ALIGNED((unsigned long)*pbuf, 4))) {
229 for (i = 0; i < blocksize / 4; i++)
230 *(*pbuf)++ = readl(priv->regbase + UNIPHIER_SD_BUF);
231 } else {
232 for (i = 0; i < blocksize / 4; i++)
233 put_unaligned(readl(priv->regbase + UNIPHIER_SD_BUF),
234 (*pbuf)++);
235 }
236
237 return 0;
238}
239
240static int uniphier_sd_pio_write_one_block(struct mmc *mmc, const u32 **pbuf,
241 uint blocksize)
242{
243 struct uniphier_sd_priv *priv = mmc->priv;
244 int i, ret;
245
246 /* wait until the buffer becomes empty */
247 ret = uniphier_sd_wait_for_irq(priv, UNIPHIER_SD_INFO2,
248 UNIPHIER_SD_INFO2_BWE);
249 if (ret)
250 return ret;
251
252 writel(0, priv->regbase + UNIPHIER_SD_INFO2);
253
254 if (likely(IS_ALIGNED((unsigned long)*pbuf, 4))) {
255 for (i = 0; i < blocksize / 4; i++)
256 writel(*(*pbuf)++, priv->regbase + UNIPHIER_SD_BUF);
257 } else {
258 for (i = 0; i < blocksize / 4; i++)
259 writel(get_unaligned((*pbuf)++),
260 priv->regbase + UNIPHIER_SD_BUF);
261 }
262
263 return 0;
264}
265
266static int uniphier_sd_pio_xfer(struct mmc *mmc, struct mmc_data *data)
267{
268 u32 *dest = (u32 *)data->dest;
269 const u32 *src = (const u32 *)data->src;
270 int i, ret;
271
272 for (i = 0; i < data->blocks; i++) {
273 if (data->flags & MMC_DATA_READ)
274 ret = uniphier_sd_pio_read_one_block(mmc, &dest,
275 data->blocksize);
276 else
277 ret = uniphier_sd_pio_write_one_block(mmc, &src,
278 data->blocksize);
279 if (ret)
280 return ret;
281 }
282
283 return 0;
284}
285
286static void uniphier_sd_dma_start(struct uniphier_sd_priv *priv,
287 dma_addr_t dma_addr)
288{
289 u32 tmp;
290
291 writel(0, priv->regbase + UNIPHIER_SD_DMA_INFO1);
292 writel(0, priv->regbase + UNIPHIER_SD_DMA_INFO2);
293
294 /* enable DMA */
295 tmp = readl(priv->regbase + UNIPHIER_SD_EXTMODE);
296 tmp |= UNIPHIER_SD_EXTMODE_DMA_EN;
297 writel(tmp, priv->regbase + UNIPHIER_SD_EXTMODE);
298
299 writel(dma_addr & U32_MAX, priv->regbase + UNIPHIER_SD_DMA_ADDR_L);
300
301 /* suppress the warning "right shift count >= width of type" */
302 dma_addr >>= min_t(int, 32, 8 * sizeof(dma_addr));
303
304 writel(dma_addr & U32_MAX, priv->regbase + UNIPHIER_SD_DMA_ADDR_H);
305
306 writel(UNIPHIER_SD_DMA_CTL_START, priv->regbase + UNIPHIER_SD_DMA_CTL);
307}
308
309static int uniphier_sd_dma_wait_for_irq(struct uniphier_sd_priv *priv, u32 flag,
310 unsigned int blocks)
311{
312 long wait = 1000000 + 10 * blocks;
313
314 while (!(readl(priv->regbase + UNIPHIER_SD_DMA_INFO1) & flag)) {
315 if (wait-- < 0) {
316 dev_err(priv->dev, "timeout during DMA\n");
317 return -ETIMEDOUT;
318 }
319
320 udelay(10);
321 }
322
323 if (readl(priv->regbase + UNIPHIER_SD_DMA_INFO2)) {
324 dev_err(priv->dev, "error during DMA\n");
325 return -EIO;
326 }
327
328 return 0;
329}
330
331static int uniphier_sd_dma_xfer(struct mmc *mmc, struct mmc_data *data)
332{
333 struct uniphier_sd_priv *priv = mmc->priv;
334 size_t len = data->blocks * data->blocksize;
335 void *buf;
336 enum dma_data_direction dir;
337 dma_addr_t dma_addr;
338 u32 poll_flag, tmp;
339 int ret;
340
341 tmp = readl(priv->regbase + UNIPHIER_SD_DMA_MODE);
342
343 if (data->flags & MMC_DATA_READ) {
344 buf = data->dest;
345 dir = DMA_FROM_DEVICE;
346 poll_flag = UNIPHIER_SD_DMA_INFO1_END_RD2;
347 tmp |= UNIPHIER_SD_DMA_MODE_DIR_RD;
348 } else {
349 buf = (void *)data->src;
350 dir = DMA_TO_DEVICE;
351 poll_flag = UNIPHIER_SD_DMA_INFO1_END_WR;
352 tmp &= ~UNIPHIER_SD_DMA_MODE_DIR_RD;
353 }
354
355 writel(tmp, priv->regbase + UNIPHIER_SD_DMA_MODE);
356
357 dma_addr = __dma_map_single(buf, len, dir);
358
359 uniphier_sd_dma_start(priv, dma_addr);
360
361 ret = uniphier_sd_dma_wait_for_irq(priv, poll_flag, data->blocks);
362
363 __dma_unmap_single(dma_addr, len, dir);
364
365 return ret;
366}
367
368/* check if the address is DMA'able */
369static bool uniphier_sd_addr_is_dmaable(unsigned long addr)
370{
371 if (!IS_ALIGNED(addr, UNIPHIER_SD_DMA_MINALIGN))
372 return false;
373
374#if defined(CONFIG_ARCH_UNIPHIER) && !defined(CONFIG_ARM64) && \
375 defined(CONFIG_SPL_BUILD)
376 /*
377 * For UniPhier ARMv7 SoCs, the stack is allocated in the locked ways
378 * of L2, which is unreachable from the DMA engine.
379 */
380 if (addr < CONFIG_SPL_STACK)
381 return false;
382#endif
383
384 return true;
385}
386
387static int uniphier_sd_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
388 struct mmc_data *data)
389{
390 struct uniphier_sd_priv *priv = mmc->priv;
391 int ret;
392 u32 tmp;
393
394 if (readl(priv->regbase + UNIPHIER_SD_INFO2) & UNIPHIER_SD_INFO2_CBSY) {
395 dev_err(priv->dev, "command busy\n");
396 return -EBUSY;
397 }
398
399 /* clear all status flags */
400 writel(0, priv->regbase + UNIPHIER_SD_INFO1);
401 writel(0, priv->regbase + UNIPHIER_SD_INFO2);
402
403 /* disable DMA once */
404 tmp = readl(priv->regbase + UNIPHIER_SD_EXTMODE);
405 tmp &= ~UNIPHIER_SD_EXTMODE_DMA_EN;
406 writel(tmp, priv->regbase + UNIPHIER_SD_EXTMODE);
407
408 writel(cmd->cmdarg, priv->regbase + UNIPHIER_SD_ARG);
409
410 tmp = cmd->cmdidx;
411
412 if (data) {
413 writel(data->blocksize, priv->regbase + UNIPHIER_SD_SIZE);
414 writel(data->blocks, priv->regbase + UNIPHIER_SD_SECCNT);
415
416 /* Do not send CMD12 automatically */
417 tmp |= UNIPHIER_SD_CMD_NOSTOP | UNIPHIER_SD_CMD_DATA;
418
419 if (data->blocks > 1)
420 tmp |= UNIPHIER_SD_CMD_MULTI;
421
422 if (data->flags & MMC_DATA_READ)
423 tmp |= UNIPHIER_SD_CMD_RD;
424 }
425
426 /*
427 * Do not use the response type auto-detection on this hardware.
428 * CMD8, for example, has different response types on SD and eMMC,
429 * while this controller always assumes the response type for SD.
430 * Set the response type manually.
431 */
432 switch (cmd->resp_type) {
433 case MMC_RSP_NONE:
434 tmp |= UNIPHIER_SD_CMD_RSP_NONE;
435 break;
436 case MMC_RSP_R1:
437 tmp |= UNIPHIER_SD_CMD_RSP_R1;
438 break;
439 case MMC_RSP_R1b:
440 tmp |= UNIPHIER_SD_CMD_RSP_R1B;
441 break;
442 case MMC_RSP_R2:
443 tmp |= UNIPHIER_SD_CMD_RSP_R2;
444 break;
445 case MMC_RSP_R3:
446 tmp |= UNIPHIER_SD_CMD_RSP_R3;
447 break;
448 default:
449 dev_err(priv->dev, "unknown response type\n");
450 return -EINVAL;
451 }
452
453 dev_dbg(priv->dev, "sending CMD%d (SD_CMD=%08x, SD_ARG=%08x)\n",
454 cmd->cmdidx, tmp, cmd->cmdarg);
455 writel(tmp, priv->regbase + UNIPHIER_SD_CMD);
456
457 ret = uniphier_sd_wait_for_irq(priv, UNIPHIER_SD_INFO1,
458 UNIPHIER_SD_INFO1_RSP);
459 if (ret)
460 return ret;
461
462 if (cmd->resp_type & MMC_RSP_136) {
463 u32 rsp_127_104 = readl(priv->regbase + UNIPHIER_SD_RSP76);
464 u32 rsp_103_72 = readl(priv->regbase + UNIPHIER_SD_RSP54);
465 u32 rsp_71_40 = readl(priv->regbase + UNIPHIER_SD_RSP32);
466 u32 rsp_39_8 = readl(priv->regbase + UNIPHIER_SD_RSP10);
467
468 cmd->response[0] = (rsp_127_104 & 0xffffff) << 8 |
469 (rsp_103_72 & 0xff);
470 cmd->response[1] = (rsp_103_72 & 0xffffff) << 8 |
471 (rsp_71_40 & 0xff);
472 cmd->response[2] = (rsp_71_40 & 0xffffff) << 8 |
473 (rsp_39_8 & 0xff);
474 cmd->response[3] = (rsp_39_8 & 0xffffff) << 8;
475 } else {
476 /* bit 39-8 */
477 cmd->response[0] = readl(priv->regbase + UNIPHIER_SD_RSP10);
478 }
479
480 if (data) {
481 /* use DMA if the HW supports it and the buffer is aligned */
482 if (priv->caps & UNIPHIER_SD_CAP_DMA_INTERNAL &&
483 uniphier_sd_addr_is_dmaable((long)data->src))
484 ret = uniphier_sd_dma_xfer(mmc, data);
485 else
486 ret = uniphier_sd_pio_xfer(mmc, data);
487
488 ret = uniphier_sd_wait_for_irq(priv, UNIPHIER_SD_INFO1,
489 UNIPHIER_SD_INFO1_CMP);
490 if (ret)
491 return ret;
492 }
493
494 return ret;
495}
496
497static void uniphier_sd_set_bus_width(struct uniphier_sd_priv *priv,
498 struct mmc *mmc)
499{
500 u32 val, tmp;
501
502 switch (mmc->bus_width) {
503 case 1:
504 val = UNIPHIER_SD_OPTION_WIDTH_1;
505 break;
506 case 4:
507 val = UNIPHIER_SD_OPTION_WIDTH_4;
508 break;
509 case 8:
510 val = UNIPHIER_SD_OPTION_WIDTH_8;
511 break;
512 default:
513 BUG();
514 break;
515 }
516
517 tmp = readl(priv->regbase + UNIPHIER_SD_OPTION);
518 tmp &= ~UNIPHIER_SD_OPTION_WIDTH_MASK;
519 tmp |= val;
520 writel(tmp, priv->regbase + UNIPHIER_SD_OPTION);
521}
522
523static void uniphier_sd_set_ddr_mode(struct uniphier_sd_priv *priv,
524 struct mmc *mmc)
525{
526 u32 tmp;
527
528 tmp = readl(priv->regbase + UNIPHIER_SD_IF_MODE);
529 if (mmc->ddr_mode)
530 tmp |= UNIPHIER_SD_IF_MODE_DDR;
531 else
532 tmp &= ~UNIPHIER_SD_IF_MODE_DDR;
533 writel(tmp, priv->regbase + UNIPHIER_SD_IF_MODE);
534}
535
536static void uniphier_sd_set_clk_rate(struct uniphier_sd_priv *priv,
537 struct mmc *mmc)
538{
539 unsigned int divisor;
540 u32 val, tmp;
541
542 if (!mmc->clock)
543 return;
544
545 divisor = DIV_ROUND_UP(priv->mclk, mmc->clock);
546
547 if (divisor <= 1)
548 val = UNIPHIER_SD_CLKCTL_DIV1;
549 else if (divisor <= 2)
550 val = UNIPHIER_SD_CLKCTL_DIV2;
551 else if (divisor <= 4)
552 val = UNIPHIER_SD_CLKCTL_DIV4;
553 else if (divisor <= 8)
554 val = UNIPHIER_SD_CLKCTL_DIV8;
555 else if (divisor <= 16)
556 val = UNIPHIER_SD_CLKCTL_DIV16;
557 else if (divisor <= 32)
558 val = UNIPHIER_SD_CLKCTL_DIV32;
559 else if (divisor <= 64)
560 val = UNIPHIER_SD_CLKCTL_DIV64;
561 else if (divisor <= 128)
562 val = UNIPHIER_SD_CLKCTL_DIV128;
563 else if (divisor <= 256)
564 val = UNIPHIER_SD_CLKCTL_DIV256;
565 else if (divisor <= 512 || !(priv->caps & UNIPHIER_SD_CAP_DIV1024))
566 val = UNIPHIER_SD_CLKCTL_DIV512;
567 else
568 val = UNIPHIER_SD_CLKCTL_DIV1024;
569
570 tmp = readl(priv->regbase + UNIPHIER_SD_CLKCTL);
571
572 /* stop the clock before changing its rate to avoid a glitch signal */
573 tmp &= ~UNIPHIER_SD_CLKCTL_SCLKEN;
574 writel(tmp, priv->regbase + UNIPHIER_SD_CLKCTL);
575
576 tmp &= ~UNIPHIER_SD_CLKCTL_DIV_MASK;
577 tmp |= val | UNIPHIER_SD_CLKCTL_OFFEN;
578 writel(tmp, priv->regbase + UNIPHIER_SD_CLKCTL);
579
580 tmp |= UNIPHIER_SD_CLKCTL_SCLKEN;
581 writel(tmp, priv->regbase + UNIPHIER_SD_CLKCTL);
582}
583
584static void uniphier_sd_set_ios(struct mmc *mmc)
585{
586 struct uniphier_sd_priv *priv = mmc->priv;
587
588 dev_dbg(priv->dev, "clock %uHz, DDRmode %d, width %u\n",
589 mmc->clock, mmc->ddr_mode, mmc->bus_width);
590
591 uniphier_sd_set_bus_width(priv, mmc);
592 uniphier_sd_set_ddr_mode(priv, mmc);
593 uniphier_sd_set_clk_rate(priv, mmc);
594
595 udelay(1000);
596}
597
598static int uniphier_sd_init(struct mmc *mmc)
599{
600 struct uniphier_sd_priv *priv = mmc->priv;
601 u32 tmp;
602
603 /* soft reset of the host */
604 tmp = readl(priv->regbase + UNIPHIER_SD_SOFT_RST);
605 tmp &= ~UNIPHIER_SD_SOFT_RST_RSTX;
606 writel(tmp, priv->regbase + UNIPHIER_SD_SOFT_RST);
607 tmp |= UNIPHIER_SD_SOFT_RST_RSTX;
608 writel(tmp, priv->regbase + UNIPHIER_SD_SOFT_RST);
609
610 /* FIXME: implement eMMC hw_reset */
611
612 writel(UNIPHIER_SD_STOP_SEC, priv->regbase + UNIPHIER_SD_STOP);
613
614 /*
615 * Connected to 32bit AXI.
616 * This register dropped backward compatibility at version 0x10.
617 * Write an appropriate value depending on the IP version.
618 */
619 writel(priv->version >= 0x10 ? 0x00000101 : 0x00000000,
620 priv->regbase + UNIPHIER_SD_HOST_MODE);
621
622 if (priv->caps & UNIPHIER_SD_CAP_DMA_INTERNAL) {
623 tmp = readl(priv->regbase + UNIPHIER_SD_DMA_MODE);
624 tmp |= UNIPHIER_SD_DMA_MODE_ADDR_INC;
625 writel(tmp, priv->regbase + UNIPHIER_SD_DMA_MODE);
626 }
627
628 return 0;
629}
630
631static int uniphier_sd_getcd(struct mmc *mmc)
632{
633 struct uniphier_sd_priv *priv = mmc->priv;
634
635 if (priv->caps & UNIPHIER_SD_CAP_NONREMOVABLE)
636 return 1;
637
638 return !!(readl(priv->regbase + UNIPHIER_SD_INFO1) &
639 UNIPHIER_SD_INFO1_CD);
640}
641
642static const struct mmc_ops uniphier_sd_ops = {
643 .send_cmd = uniphier_sd_send_cmd,
644 .set_ios = uniphier_sd_set_ios,
645 .init = uniphier_sd_init,
646 .getcd = uniphier_sd_getcd,
647};
648
649int uniphier_sd_probe(struct udevice *dev)
650{
651 struct uniphier_sd_priv *priv = dev_get_priv(dev);
652 struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
653 fdt_addr_t base;
Stephen Warren135aa952016-06-17 09:44:00 -0600654 struct clk clk;
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900655 int ret;
656
657 priv->dev = dev;
658
Masahiro Yamada4f805012016-03-24 22:32:42 +0900659 base = dev_get_addr(dev);
660 if (base == FDT_ADDR_T_NONE)
661 return -EINVAL;
662
Masahiro Yamada4e3d8402016-07-19 21:56:13 +0900663 priv->regbase = devm_ioremap(dev, base, SZ_2K);
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900664 if (!priv->regbase)
665 return -ENOMEM;
666
Stephen Warren135aa952016-06-17 09:44:00 -0600667 ret = clk_get_by_index(dev, 0, &clk);
668 if (ret < 0) {
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900669 dev_err(dev, "failed to get host clock\n");
Stephen Warren135aa952016-06-17 09:44:00 -0600670 return ret;
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900671 }
672
673 /* set to max rate */
Stephen Warren135aa952016-06-17 09:44:00 -0600674 priv->mclk = clk_set_rate(&clk, ULONG_MAX);
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900675 if (IS_ERR_VALUE(priv->mclk)) {
676 dev_err(dev, "failed to set rate for host clock\n");
Stephen Warren135aa952016-06-17 09:44:00 -0600677 clk_free(&clk);
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900678 return priv->mclk;
679 }
680
Stephen Warren135aa952016-06-17 09:44:00 -0600681 ret = clk_enable(&clk);
682 clk_free(&clk);
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900683 if (ret) {
684 dev_err(dev, "failed to enable host clock\n");
685 return ret;
686 }
687
688 priv->cfg.name = dev->name;
689 priv->cfg.ops = &uniphier_sd_ops;
690 priv->cfg.host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS;
691
692 switch (fdtdec_get_int(gd->fdt_blob, dev->of_offset, "bus-width", 1)) {
693 case 8:
694 priv->cfg.host_caps |= MMC_MODE_8BIT;
695 break;
696 case 4:
697 priv->cfg.host_caps |= MMC_MODE_4BIT;
698 break;
699 case 1:
700 break;
701 default:
702 dev_err(dev, "Invalid \"bus-width\" value\n");
703 return -EINVAL;
704 }
705
706 if (fdt_get_property(gd->fdt_blob, dev->of_offset, "non-removable",
707 NULL))
708 priv->caps |= UNIPHIER_SD_CAP_NONREMOVABLE;
709
710 priv->version = readl(priv->regbase + UNIPHIER_SD_VERSION) &
711 UNIPHIER_SD_VERSION_IP;
712 dev_dbg(dev, "version %x\n", priv->version);
713 if (priv->version >= 0x10) {
714 priv->caps |= UNIPHIER_SD_CAP_DMA_INTERNAL;
715 priv->caps |= UNIPHIER_SD_CAP_DIV1024;
716 }
717
718 priv->cfg.voltages = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34;
719 priv->cfg.f_min = priv->mclk /
720 (priv->caps & UNIPHIER_SD_CAP_DIV1024 ? 1024 : 512);
721 priv->cfg.f_max = priv->mclk;
722 priv->cfg.b_max = U32_MAX; /* max value of UNIPHIER_SD_SECCNT */
723
724 priv->mmc = mmc_create(&priv->cfg, priv);
725 if (!priv->mmc)
726 return -EIO;
727
728 upriv->mmc = priv->mmc;
Simon Glasscffe5d82016-05-01 13:52:34 -0600729 priv->mmc->dev = dev;
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900730
731 return 0;
732}
733
734int uniphier_sd_remove(struct udevice *dev)
735{
736 struct uniphier_sd_priv *priv = dev_get_priv(dev);
737
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900738 mmc_destroy(priv->mmc);
739
740 return 0;
741}
742
743static const struct udevice_id uniphier_sd_match[] = {
744 { .compatible = "socionext,uniphier-sdhc" },
745 { /* sentinel */ }
746};
747
748U_BOOT_DRIVER(uniphier_mmc) = {
749 .name = "uniphier-mmc",
750 .id = UCLASS_MMC,
751 .of_match = uniphier_sd_match,
752 .probe = uniphier_sd_probe,
753 .remove = uniphier_sd_remove,
754 .priv_auto_alloc_size = sizeof(struct uniphier_sd_priv),
755};