blob: c7affd6f3a139e9a8106401fd8921c969b4d2109 [file] [log] [blame]
Heiko Schocherc0dcece2013-08-19 16:39:01 +02001/*
2 * siemens am33x common board options
3 * (C) Copyright 2013 Siemens Schweiz AG
4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
5 *
6 * Based on:
7 * U-Boot file:/include/configs/am335x_evm.h
8 *
9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
10 *
11 * SPDX-License-Identifier: GPL-2.0+
12 */
13
14#ifndef __CONFIG_SIEMENS_AM33X_COMMON_H
15#define __CONFIG_SIEMENS_AM33X_COMMON_H
16
17#define CONFIG_AM33XX
18#define CONFIG_OMAP
19#define CONFIG_OMAP_COMMON
20
21#include <asm/arch/omap.h>
22
23#define CONFIG_DMA_COHERENT
24#define CONFIG_DMA_COHERENT_SIZE (1 << 20)
25
26#define CONFIG_ENV_SIZE (0x2000)
27#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
28#define CONFIG_SYS_LONGHELP /* undef to save memory */
29#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
30#define CONFIG_SYS_PROMPT "U-Boot# "
31#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
32#define CONFIG_BOARD_LATE_INIT
33#define CONFIG_SYS_NO_FLASH
34#define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE
35
36#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
37#define CONFIG_SETUP_MEMORY_TAGS
38#define CONFIG_INITRD_TAG
39
40#define CONFIG_SYS_CACHELINE_SIZE 64
41
42/* commands to include */
43#include <config_cmd_default.h>
44
45#define CONFIG_CMD_ASKENV
46#define CONFIG_CMD_ECHO
47#define CONFIG_CMD_CACHE
48
Heiko Schocherd14c6332014-05-14 12:40:27 +020049#define CONFIG_SYS_GENERIC_BOARD
50
Heiko Schocherc0dcece2013-08-19 16:39:01 +020051#define CONFIG_ENV_VARS_UBOOT_CONFIG
52#ifndef CONFIG_SPL_BUILD
53#define CONFIG_ROOTPATH "/opt/eldk"
54#endif
55
56#define CONFIG_ENV_OVERWRITE 1
57#define CONFIG_ENV_IS_NOWHERE
58
59#define CONFIG_SYS_LONGHELP
60#define CONFIG_CMDLINE_EDITING
61#define CONFIG_AUTO_COMPLETE
62#define CONFIG_SYS_AUTOLOAD "yes"
63
64/* Clock Defines */
65#define V_OSCK 24000000 /* Clock output from T2 */
66#define V_SCLK (V_OSCK)
67
68/* We set the max number of command args high to avoid HUSH bugs. */
69#define CONFIG_SYS_MAXARGS 32
70
71/* Console I/O Buffer Size */
72#define CONFIG_SYS_CBSIZE 512
73
74/* Print Buffer Size */
75#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
76 + sizeof(CONFIG_SYS_PROMPT) + 16)
77
78/* Boot Argument Buffer Size */
79#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
80
81/*
82 * memtest works on 8 MB in DRAM after skipping 32MB from
83 * start addr of ram disk
84 */
85#define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024))
86#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
87 + (8 * 1024 * 1024))
88
89#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
Heiko Schocherc0dcece2013-08-19 16:39:01 +020090
91#define CONFIG_MMC
92#define CONFIG_GENERIC_MMC
93#define CONFIG_OMAP_HSMMC
94#define CONFIG_CMD_MMC
95#define CONFIG_DOS_PARTITION
96#define CONFIG_CMD_FAT
97#define CONFIG_CMD_EXT2
98
99#define CONFIG_SPI
100#define CONFIG_OMAP3_SPI
101#define CONFIG_MTD_DEVICE
102#define CONFIG_SPI_FLASH
103#define CONFIG_SPI_FLASH_WINBOND
104#define CONFIG_CMD_SF
105#define CONFIG_SF_DEFAULT_SPEED (75000000)
106
107 /* Physical Memory Map */
108#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
109#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
110
111#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
112#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
113 GENERATED_GBL_DATA_SIZE)
114 /* Platform/Board specific defs */
115#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
116#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200117
118/* NS16550 Configuration */
119#define CONFIG_SYS_NS16550
120#define CONFIG_SYS_NS16550_SERIAL
121#define CONFIG_SERIAL_MULTI
122#define CONFIG_SYS_NS16550_REG_SIZE (-4)
123#define CONFIG_SYS_NS16550_CLK (48000000)
124#define CONFIG_SYS_NS16550_COM1 0x44e09000
125#define CONFIG_SYS_NS16550_COM4 0x481a6000
126
127#define CONFIG_BAUDRATE 115200
128
129#define CONFIG_SYS_CONSOLE_INFO_QUIET
130#define CONFIG_SERIAL1 1
131#define CONFIG_CONS_INDEX 1
132
133/* I2C Configuration */
134#define CONFIG_I2C
135#define CONFIG_CMD_I2C
Heiko Schocher6789e842013-10-22 11:03:18 +0200136#define CONFIG_SYS_I2C
137#define CONFIG_SYS_OMAP24_I2C_SPEED OMAP_I2C_STANDARD
138#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
139#define CONFIG_SYS_I2C_OMAP24XX
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200140
141/* Defines for SPL */
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200142#define CONFIG_SPL_FRAMEWORK
143#define CONFIG_SPL_TEXT_BASE 0x402F0400
144#define CONFIG_SPL_MAX_SIZE (101 * 1024)
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200145
146#define CONFIG_SPL_BSS_START_ADDR 0x80000000
147#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
148
149#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
Paul Kocialkowskie2ccdf82014-11-08 23:14:55 +0100150#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
Guillaume GARDET205b4f32014-10-15 17:53:11 +0200151#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200152#define CONFIG_SPL_MMC_SUPPORT
153#define CONFIG_SPL_FAT_SUPPORT
154#define CONFIG_FS_FAT
155#define CONFIG_SPL_I2C_SUPPORT
156
157#define CONFIG_SPL_LIBCOMMON_SUPPORT
158#define CONFIG_SPL_LIBDISK_SUPPORT
159#define CONFIG_SPL_LIBGENERIC_SUPPORT
160#define CONFIG_SPL_SERIAL_SUPPORT
161#define CONFIG_SPL_YMODEM_SUPPORT
162
163#define CONFIG_SPL_GPIO_SUPPORT
164#define CONFIG_SPL_WATCHDOG_SUPPORT
165
166#define CONFIG_SPL_SPI_SUPPORT
167#define CONFIG_SPL_SPI_FLASH_SUPPORT
168#define CONFIG_SPL_SPI_LOAD
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200169#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
170
171#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
172
173#define CONFIG_SPL_BOARD_INIT
174#define CONFIG_SPL_NAND_AM33XX_BCH
175#define CONFIG_SPL_NAND_SUPPORT
176#define CONFIG_SPL_NAND_BASE
177#define CONFIG_SPL_NAND_DRIVERS
178#define CONFIG_SPL_NAND_ECC
179#define CONFIG_SYS_NAND_5_ADDR_CYCLE
180#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
181 CONFIG_SYS_NAND_PAGE_SIZE)
182#define CONFIG_SYS_NAND_PAGE_SIZE 2048
183#define CONFIG_SYS_NAND_OOBSIZE 64
184#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
185#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
186#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
187 10, 11, 12, 13, 14, 15, 16, 17, \
188 18, 19, 20, 21, 22, 23, 24, 25, \
189 26, 27, 28, 29, 30, 31, 32, 33, \
190 34, 35, 36, 37, 38, 39, 40, 41, \
191 42, 43, 44, 45, 46, 47, 48, 49, \
192 50, 51, 52, 53, 54, 55, 56, 57, }
193
194#define CONFIG_SYS_NAND_ECCSIZE 512
195#define CONFIG_SYS_NAND_ECCBYTES 14
pekon gupta3f719062013-11-18 19:03:01 +0530196#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200197
198#define CONFIG_SYS_NAND_ECCSTEPS 4
199#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
200 CONFIG_SYS_NAND_ECCSTEPS)
201
202#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
203
204#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
205
206/*
207 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
208 * 64 bytes before this address should be set aside for u-boot.img's
209 * header. That is 0x800FFFC0--0x80100000 should not be used for any
210 * other needs.
211 */
212#define CONFIG_SYS_TEXT_BASE 0x80100000
213#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
214#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
215
216/*
217 * Since SPL did pll and ddr initialization for us,
218 * we don't need to do it twice.
219 */
220#ifndef CONFIG_SPL_BUILD
221#define CONFIG_SKIP_LOWLEVEL_INIT
222#endif
223
224#ifndef CONFIG_SPL_BUILD
225/*
226 * USB configuration
227 */
228#define CONFIG_USB_MUSB_DSPS
229#define CONFIG_ARCH_MISC_INIT
230#define CONFIG_MUSB_GADGET
231#define CONFIG_MUSB_PIO_ONLY
232#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
Heiko Schocherece91012014-09-10 08:55:01 +0200233#undef CONFIG_USB_GADGET_DUALSPEED
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200234#define CONFIG_USB_GADGET_VBUS_DRAW 2
235#define CONFIG_MUSB_HOST
236
237#define CONFIG_AM335X_USB0
238#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
239#define CONFIG_AM335X_USB1
240#define CONFIG_AM335X_USB1_MODE MUSB_HOST
241#ifdef CONFIG_MUSB_HOST
242#define CONFIG_CMD_USB
243#define CONFIG_USB_STORAGE
244#endif
245
246#ifdef CONFIG_MUSB_GADGET
247#define CONFIG_USB_ETHER
248#define CONFIG_USB_ETH_RNDIS
249#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
250#endif /* CONFIG_MUSB_GADGET */
251
252#define CONFIG_USB_GADGET
253#define CONFIG_USBDOWNLOAD_GADGET
254
Samuel Egli56eb3da2013-11-04 14:05:03 +0100255/* USB DRACO ID as default */
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200256#define CONFIG_USBD_HS
Samuel Egli56eb3da2013-11-04 14:05:03 +0100257#define CONFIG_G_DNL_VENDOR_NUM 0x0908
258#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2
259#define CONFIG_G_DNL_MANUFACTURER "Siemens AG"
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200260
261/* USB Device Firmware Update support */
262#define CONFIG_DFU_FUNCTION
263#define CONFIG_DFU_NAND
264#define CONFIG_CMD_DFU
265#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20)
Heiko Schocher401341d2014-03-18 08:09:57 +0100266#define DFU_MANIFEST_POLL_TIMEOUT 25000
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200267
268#endif /* CONFIG_SPL_BUILD */
269
270/*
271 * Default to using SPI for environment, etc. We have multiple copies
272 * of SPL as the ROM will check these locations.
273 * 0x0 - 0x20000 : First copy of SPL
274 * 0x20000 - 0x40000 : Second copy of SPL
275 * 0x40000 - 0x60000 : Third copy of SPL
276 * 0x60000 - 0x80000 : Fourth copy of SPL
277 * 0x80000 - 0xDF000 : U-Boot
278 * 0xDF000 - 0xE0000 : U-Boot Environment
279 * 0xE0000 - 0x442000 : Linux Kernel
280 * 0x442000 - 0x800000 : Userland
281 */
282#if defined(CONFIG_SPI_BOOT)
283# undef CONFIG_ENV_IS_NOWHERE
284# define CONFIG_ENV_IS_IN_SPI_FLASH
285# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
286# define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */
287# define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
288#endif /* SPI support */
289
290/* Unsupported features */
291#undef CONFIG_USE_IRQ
292
293#define CONFIG_CMD_NET
294#define CONFIG_CMD_DHCP
295#define CONFIG_CMD_PING
296#define CONFIG_DRIVER_TI_CPSW
297#define CONFIG_MII
298#define CONFIG_PHY_GIGE
299#define CONFIG_PHYLIB
300#define CONFIG_CMD_MII
301#define CONFIG_BOOTP_DEFAULT
302#define CONFIG_BOOTP_DNS
303#define CONFIG_BOOTP_DNS2
304#define CONFIG_BOOTP_SEND_HOSTNAME
305#define CONFIG_BOOTP_GATEWAY
306#define CONFIG_BOOTP_SUBNETMASK
307#define CONFIG_NET_RETRY_COUNT 10
308#define CONFIG_NET_MULTI
309
310#define CONFIG_NAND
311/* NAND support */
312#ifdef CONFIG_NAND
313#define CONFIG_CMD_NAND
314#define CONFIG_CMD_MTDPARTS
315
316#define MTDIDS_NAME_STR "omap2-nand.0"
317#define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR
318#define MTDPARTS_DEFAULT "mtdparts=" MTDIDS_NAME_STR ":" \
319 "128k(spl)," \
320 "128k(spl.backup1)," \
321 "128k(spl.backup2)," \
322 "128k(spl.backup3)," \
323 "1920k(u-boot)," \
324 "128k(uboot.env)," \
325 "5120k(kernel_a)," \
326 "5120k(kernel_b)," \
327 "8192k(mtdoops)," \
328 "-(rootfs)"
329/*
330 * chip-size = 256MiB
331 *| name | size | address area |
332 *-------------------------------------------------------
333 *| spl | 128.000 KiB | 0x 0..0x 1ffff |
334 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff |
335 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff |
336 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff |
337 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff |
338 *| uboot.env | 128.000 KiB | 0x 260000..0x 27ffff |
339 *| kernel_a | 5.000 MiB | 0x 280000..0x 77ffff |
340 *| kernel_b | 5.000 MiB | 0x 780000..0x c7ffff |
341 *| mtdoops | 8.000 MiB | 0x c80000..0x 147ffff |
342 *| rootfs | 235.500 MiB | 0x 1480000..0x fffffff |
343 *-------------------------------------------------------
344 */
345
346#define DFU_ALT_INFO_NAND \
347 "spl part 0 1;" \
348 "spl.backup1 part 0 2;" \
349 "spl.backup2 part 0 3;" \
350 "spl.backup3 part 0 4;" \
351 "u-boot part 0 5;" \
352 "u-boot.env part 0 6;" \
353 "kernel_a part 0 7;" \
354 "kernel_b part 0 8;" \
355 "rootfs partubi 0 10"
356
357#define CONFIG_COMMON_ENV_SETTINGS \
358 "verify=no \0" \
Egli, Samuel66c45fa2014-04-24 17:57:56 +0200359 "project_dir=targetdir\0" \
Samuel Egli56eb3da2013-11-04 14:05:03 +0100360 "upgrade_available=0\0" \
361 "altbootcmd=run bootcmd\0" \
362 "bootlimit=3\0" \
363 "partitionset_active=A\0" \
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200364 "loadaddr=0x82000000\0" \
365 "kloadaddr=0x81000000\0" \
366 "script_addr=0x81900000\0" \
Samuel Egli56eb3da2013-11-04 14:05:03 +0100367 "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200368 "nand_active_ubi_vol=rootfs_a\0" \
Samuel Egli56eb3da2013-11-04 14:05:03 +0100369 "nand_active_ubi_vol_A=rootfs_a\0" \
370 "nand_active_ubi_vol_B=rootfs_b\0" \
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200371 "nand_root_fs_type=ubifs rootwait=1\0" \
372 "nand_src_addr=0x280000\0" \
Samuel Egli56eb3da2013-11-04 14:05:03 +0100373 "nand_src_addr_A=0x280000\0" \
374 "nand_src_addr_B=0x780000\0" \
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200375 "nfsopts=nolock rw mem=128M\0" \
376 "ip_method=none\0" \
377 "bootenv=uEnv.txt\0" \
378 "bootargs_defaults=setenv bootargs " \
379 "console=${console} " \
Samuel Egli56eb3da2013-11-04 14:05:03 +0100380 "${testargs} " \
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200381 "${optargs}\0" \
382 "nand_args=run bootargs_defaults;" \
383 "mtdparts default;" \
Samuel Egli56eb3da2013-11-04 14:05:03 +0100384 "setenv ${partitionset_active} true;" \
385 "if test -n ${A}; then " \
386 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \
387 "setenv nand_src_addr ${nand_src_addr_A};" \
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200388 "fi;" \
Samuel Egli56eb3da2013-11-04 14:05:03 +0100389 "if test -n ${B}; then " \
390 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \
391 "setenv nand_src_addr ${nand_src_addr_B};" \
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200392 "fi;" \
393 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
394 "ubi.mtd=9,2048;" \
395 "setenv bootargs ${bootargs} " \
396 "root=${nand_root} noinitrd ${mtdparts} " \
397 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
398 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
399 "=mtdoops\0" \
400 "dfu_args=run bootargs_defaults;" \
401 "setenv bootargs ${bootargs} ;" \
402 "mtdparts default; " \
Egli, Samuel84112b52014-04-24 17:57:55 +0200403 "led dfu 1;" \
404 "led stat 0;" \
405 "dfu 0 nand 0;" \
406 "led dfu 0;" \
407 "led stat 1;\0" \
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200408 "dfu_alt_info=" DFU_ALT_INFO_NAND "\0" \
409 "net_args=run bootargs_defaults;" \
410 "mtdparts default;" \
411 "setenv bootfile ${project_dir}/kernel/uImage;" \
412 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
413 "setenv bootargs ${bootargs} " \
414 "root=/dev/nfs ${mtdparts} " \
415 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
Samuel Egli56eb3da2013-11-04 14:05:03 +0100416 "ip=${ipaddr}:${serverip}:" \
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200417 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
Samuel Egli56eb3da2013-11-04 14:05:03 +0100418 "nand_boot=echo Booting from nand; " \
419 "if test ${upgrade_available} -eq 1; then " \
420 "if test ${bootcount} -gt ${bootlimit}; " \
421 "then " \
422 "setenv upgrade_available 0;" \
423 "setenv ${partitionset_active} true;" \
424 "if test -n ${A}; then " \
425 "setenv partitionset_active B; " \
426 "env delete A; " \
427 "fi;" \
428 "if test -n ${B}; then " \
429 "setenv partitionset_active A; " \
430 "env delete B; " \
431 "fi;" \
432 "saveenv; " \
433 "fi;" \
434 "fi;" \
435 "echo set ${partitionset_active}...;" \
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200436 "run nand_args; " \
437 "nand read.i ${kloadaddr} ${nand_src_addr} " \
438 "${nand_img_size}; bootm ${kloadaddr}\0" \
439 "net_nfs=echo Booting from network ...; " \
440 "run net_args; " \
441 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
442 "bootm ${kloadaddr}\0" \
443 "flash_self=run nand_boot\0" \
Samuel Egli56eb3da2013-11-04 14:05:03 +0100444 "flash_self_test=setenv testargs test; " \
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200445 "run nand_boot\0" \
446 "dfu_start=echo Preparing for dfu mode ...; " \
447 "run dfu_args; \0" \
448 "preboot=echo; "\
449 "echo Type 'run flash_self' to use kernel and root " \
450 "filesystem on memory; echo Type 'run flash_self_test' to " \
451 "use kernel and root filesystem on memory, boot in test " \
452 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
453 "from memory and root filesystem over NFS; echo Type " \
454 "'run net_nfs' to get Kernel over TFTP and mount root " \
Samuel Egli56eb3da2013-11-04 14:05:03 +0100455 "filesystem over NFS; " \
456 "echo Set partitionset_active variable to 'A' " \
457 "or 'B' to select kernel and rootfs partition; " \
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200458 "echo" \
459 "\0"
460
461#define CONFIG_NAND_OMAP_GPMC
pekon guptabeba5f02013-11-18 19:02:59 +0530462#define CONFIG_NAND_OMAP_ELM
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200463#define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */
464 /* to access nand at */
465 /* CS0 */
466#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND
467 devices */
468#if !defined(CONFIG_SPI_BOOT)
469#undef CONFIG_ENV_IS_NOWHERE
470#define CONFIG_ENV_IS_IN_NAND
471#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
472#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
473#endif
474#endif
475
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200476#define CONFIG_OMAP_GPIO
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200477
478/* Watchdog */
479#define CONFIG_HW_WATCHDOG
480
481/* Stop autoboot with ESC ESC key detected */
482#define CONFIG_AUTOBOOT_KEYED
483#define CONFIG_AUTOBOOT_STOP_STR "\x1b\x1b"
484#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \
485 "press \"<Esc><Esc>\" to stop\n", bootdelay
486
Samuel Egli56eb3da2013-11-04 14:05:03 +0100487/* Reboot after 60 sec if bootcmd fails */
488#define CONFIG_RESET_TO_RETRY
489#define CONFIG_BOOT_RETRY_TIME 60
490
491#define CONFIG_BOOTCOUNT_LIMIT
492#define CONFIG_BOOTCOUNT_ENV
Stefan Roese9167fc82013-11-22 12:56:29 +0100493
494/* Enable Device-Tree (FDT) support */
495#define CONFIG_OF_LIBFDT
496#define CONFIG_CMD_FDT
497
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200498#endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */