Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 1f3555d906442b3899660c9120a89cee12ab1d06 / . / arch / arm / dts / imx6qdl-gw5903.dtsi
blob: 78f9ec90b7cba03ca4c8fd37d0466fd5ec0fdf7e [file] [log] [blame]
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]1/*
2 * Copyright 2017 Gateworks Corporation
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public
20 * License along with this file; if not, write to the Free
21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 * MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 * b) Permission is hereby granted, free of charge, to any person
27 * obtaining a copy of this software and associated documentation
28 * files (the "Software"), to deal in the Software without
29 * restriction, including without limitation the rights to use,
30 * copy, modify, merge, publish, distribute, sublicense, and/or
31 * sell copies of the Software, and to permit persons to whom the
32 * Software is furnished to do so, subject to the following
33 * conditions:
34 *
35 * The above copyright notice and this permission notice shall be
36 * included in all copies or substantial portions of the Software.
37 *
38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 * OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48#include <dt-bindings/gpio/gpio.h>
49#include <dt-bindings/input/linux-event-codes.h>
50#include <dt-bindings/interrupt-controller/irq.h>
51
52/ {
53 chosen {
54 stdout-path = &uart2;
55 };
56
57 backlight {
58 compatible = "pwm-backlight";
59 pwms = <&pwm1 0 5000000>;
60 brightness-levels = <
61 0 1 2 3 4 5 6 7 8 9
62 10 11 12 13 14 15 16 17 18 19
63 20 21 22 23 24 25 26 27 28 29
64 30 31 32 33 34 35 36 37 38 39
65 40 41 42 43 44 45 46 47 48 49
66 50 51 52 53 54 55 56 57 58 59
67 60 61 62 63 64 65 66 67 68 69
68 70 71 72 73 74 75 76 77 78 79
69 80 81 82 83 84 85 86 87 88 89
70 90 91 92 93 94 95 96 97 98 99
71 100
72 >;
73 default-brightness-level = <100>;
74 };
75
76 gpio-keys {
77 compatible = "gpio-keys";
78 #address-cells = <1>;
79 #size-cells = <0>;
80
81 user-pb {
82 label = "user_pb";
83 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
84 linux,code = <BTN_0>;
85 };
86
87 user-pb1x {
88 label = "user_pb1x";
89 linux,code = <BTN_1>;
90 interrupt-parent = <&gsc>;
91 interrupts = <0>;
92 };
93
94 key-erased {
95 label = "key-erased";
96 linux,code = <BTN_2>;
97 interrupt-parent = <&gsc>;
98 interrupts = <1>;
99 };
100
101 eeprom-wp {
102 label = "eeprom_wp";
103 linux,code = <BTN_3>;
104 interrupt-parent = <&gsc>;
105 interrupts = <2>;
106 };
107
108 tamper {
109 label = "tamper";
110 linux,code = <BTN_4>;
111 interrupt-parent = <&gsc>;
112 interrupts = <5>;
113 };
114
115 switch-hold {
116 label = "switch_hold";
117 linux,code = <BTN_5>;
118 interrupt-parent = <&gsc>;
119 interrupts = <7>;
120 };
121 };
122
123 leds {
124 compatible = "gpio-leds";
125 pinctrl-names = "default";
126 pinctrl-0 = <&pinctrl_gpio_leds>;
127
128 led0: user1 {
129 label = "user1";
130 gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
131 default-state = "off";
132 };
133 };
134
135 memory@10000000 {
136 device_type = "memory";
137 reg = <0x10000000 0x40000000>;
138 };
139
140 reg_5p0v: regulator-5p0v {
141 compatible = "regulator-fixed";
142 regulator-name = "5P0V";
143 regulator-min-microvolt = <5000000>;
144 regulator-max-microvolt = <5000000>;
145 regulator-always-on;
146 };
147
148 reg_3p3v: regulator-3p3v {
149 compatible = "regulator-fixed";
150 regulator-name = "3P3V";
151 regulator-min-microvolt = <3300000>;
152 regulator-max-microvolt = <3300000>;
153 regulator-always-on;
154 };
155
156 reg_2p5v: regulator-2p5v {
157 compatible = "regulator-fixed";
158 regulator-name = "2P5V";
159 regulator-min-microvolt = <2500000>;
160 regulator-max-microvolt = <2500000>;
161 regulator-always-on;
162 };
163
164 reg_usb_h1_vbus: regulator-usb-h1-vbus {
165 compatible = "regulator-fixed";
166 regulator-name = "usb_h1_vbus";
167 regulator-min-microvolt = <5000000>;
168 regulator-max-microvolt = <5000000>;
169 gpio = <&gpio3 30 0>;
170 enable-active-high;
171 };
172
173 reg_usb_otg_vbus: regulator-usb-otg-vbus {
174 compatible = "regulator-fixed";
175 regulator-name = "usb_otg_vbus";
176 regulator-min-microvolt = <5000000>;
177 regulator-max-microvolt = <5000000>;
178 gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
179 enable-active-high;
180 };
181
182 reg_12p0: regulator-12p0v {
183 compatible = "regulator-fixed";
184 regulator-name = "12P0V";
185 regulator-min-microvolt = <12000000>;
186 regulator-max-microvolt = <12000000>;
187 gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
188 enable-active-high;
189 };
190
191 sound {
192 compatible = "fsl,imx-audio-tlv320";
193 model = "imx-tlv320";
194 ssi-controller = <&ssi1>;
195 audio-codec = <&tlv320aic3105>;
196 /* routing of sink, source */
197 audio-routing =
198 /* TLV320 LINE1L pin <-> Mic Jack connector */
199 "LINE1L", "Mic Jack",
200 /* board Headphone Jack <-> HPOUT */
201 "Headphone Jack", "HPLOUT",
202 "Headphone Jack", "HPROUT",
203 "Mic Jack", "Mic Bias";
204 mux-int-port = <1>;
205 mux-ext-port = <6>;
206 };
207};
208
209&audmux {
210 pinctrl-names = "default";
211 pinctrl-0 = <&pinctrl_audmux>;
212 status = "okay";
213};
214
215&clks {
216 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
217 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
218 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
219 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
220};
221
222&fec {
223 pinctrl-names = "default";
224 pinctrl-0 = <&pinctrl_enet>;
225 phy-mode = "rgmii-id";
226 status = "okay";
227};
228
229&i2c1 {
230 clock-frequency = <100000>;
231 pinctrl-names = "default";
232 pinctrl-0 = <&pinctrl_i2c1>;
233 status = "okay";
234
235 gsc: gsc@20 {
236 compatible = "gw,gsc";
237 reg = <0x20>;
238 interrupt-parent = <&gpio1>;
239 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
240 interrupt-controller;
241 #interrupt-cells = <1>;
242 #size-cells = <0>;
243
244 adc {
245 compatible = "gw,gsc-adc";
246 #address-cells = <1>;
247 #size-cells = <0>;
248
249 channel@0 {
250 gw,mode = <0>;
251 reg = <0x00>;
252 label = "temp";
253 };
254
255 channel@2 {
256 gw,mode = <1>;
257 reg = <0x02>;
258 label = "vdd_vin";
259 };
260
261 channel@5 {
262 gw,mode = <1>;
263 reg = <0x05>;
264 label = "vdd_3p3";
265 };
266
267 channel@8 {
268 gw,mode = <1>;
269 reg = <0x08>;
270 label = "vdd_bat";
271 };
272
273 channel@b {
274 gw,mode = <1>;
275 reg = <0x0b>;
276 label = "vdd_5p0";
277 };
278
279 channel@e {
280 gw,mode = <1>;
281 reg = <0xe>;
282 label = "vdd_arm";
283 };
284
285 channel@11 {
286 gw,mode = <1>;
287 reg = <0x11>;
288 label = "vdd_soc";
289 };
290
291 channel@14 {
292 gw,mode = <1>;
293 reg = <0x14>;
294 label = "vdd_3p0";
295 };
296
297 channel@17 {
298 gw,mode = <1>;
299 reg = <0x17>;
300 label = "vdd_1p5";
301 };
302
303 channel@1d {
304 gw,mode = <1>;
305 reg = <0x1d>;
306 label = "vdd_1p8";
307 };
308
309 channel@20 {
310 gw,mode = <1>;
311 reg = <0x20>;
312 label = "vdd_an1";
313 };
314
315 channel@23 {
316 gw,mode = <1>;
317 reg = <0x23>;
318 label = "vdd_2p5";
319 };
320 };
321 };
322
323 gsc_gpio: gpio@23 {
324 compatible = "nxp,pca9555";
325 reg = <0x23>;
326 gpio-controller;
327 #gpio-cells = <2>;
328 interrupt-parent = <&gsc>;
329 interrupts = <4>;
330 };
331
332 eeprom1: eeprom@50 {
333 compatible = "atmel,24c02";
334 reg = <0x50>;
335 pagesize = <16>;
336 };
337
338 eeprom2: eeprom@51 {
339 compatible = "atmel,24c02";
340 reg = <0x51>;
341 pagesize = <16>;
342 };
343
344 eeprom3: eeprom@52 {
345 compatible = "atmel,24c02";
346 reg = <0x52>;
347 pagesize = <16>;
348 };
349
350 eeprom4: eeprom@53 {
351 compatible = "atmel,24c02";
352 reg = <0x53>;
353 pagesize = <16>;
354 };
355
356 dts1672: rtc@68 {
357 compatible = "dallas,ds1672";
358 reg = <0x68>;
359 };
360};
361
362&i2c2 {
363 clock-frequency = <400000>;
364 pinctrl-names = "default";
365 pinctrl-0 = <&pinctrl_i2c2>;
366 status = "okay";
367
368 ltc3676: pmic@3c {
369 compatible = "lltc,ltc3676";
370 reg = <0x3c>;
371 interrupt-parent = <&gpio1>;
372 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
373
374 regulators {
375 /* VDD_1P8 (1+R1/R2 = 2.505): Aud/eMMC/microSD/Touch */
376 reg_1p8v: sw1 {
377 regulator-name = "vdd1p8";
378 regulator-min-microvolt = <1033310>;
379 regulator-max-microvolt = <2004000>;
380 lltc,fb-voltage-divider = <301000 200000>;
381 regulator-ramp-delay = <7000>;
382 regulator-boot-on;
383 regulator-always-on;
384 };
385
386 /* VDD_DDR (1+R1/R2 = 2.105) */
387 reg_vdd_ddr: sw2 {
388 regulator-name = "vddddr";
389 regulator-min-microvolt = <868310>;
390 regulator-max-microvolt = <1684000>;
391 lltc,fb-voltage-divider = <221000 200000>;
392 regulator-ramp-delay = <7000>;
393 regulator-boot-on;
394 regulator-always-on;
395 };
396
397 /* VDD_ARM (1+R1/R2 = 1.635) */
398 reg_vdd_arm: sw3 {
399 regulator-name = "vddarm";
400 regulator-min-microvolt = <674400>;
401 regulator-max-microvolt = <1308000>;
402 lltc,fb-voltage-divider = <127000 200000>;
403 regulator-ramp-delay = <7000>;
404 regulator-boot-on;
405 regulator-always-on;
406 linux,phandle = <&reg_vdd_arm>;
407 };
408
409 /* VDD_SOC (1+R1/R2 = 1.635) */
410 reg_vdd_soc: sw4 {
411 regulator-name = "vddsoc";
412 regulator-min-microvolt = <674400>;
413 regulator-max-microvolt = <1308000>;
414 lltc,fb-voltage-divider = <127000 200000>;
415 regulator-ramp-delay = <7000>;
416 regulator-boot-on;
417 regulator-always-on;
418 linux,phandle = <&reg_vdd_soc>;
419 };
420
421 /* VDD_1P0 (1+R1/R2 = 1.38): */
422 reg_1p0v: ldo2 {
423 regulator-name = "vdd1p0";
424 regulator-min-microvolt = <1002777>;
425 regulator-max-microvolt = <1002777>;
426 lltc,fb-voltage-divider = <100000 261000>;
427 regulator-boot-on;
428 regulator-always-on;
429 };
430
431 /* VDD_HIGH (1+R1/R2 = 4.17) */
432 reg_3p0v: ldo4 {
433 regulator-name = "vdd3p0";
434 regulator-min-microvolt = <3023250>;
435 regulator-max-microvolt = <3023250>;
436 lltc,fb-voltage-divider = <634000 200000>;
437 regulator-boot-on;
438 regulator-always-on;
439 };
440 };
441 };
442};
443
444&i2c3 {
445 clock-frequency = <400000>;
446 pinctrl-names = "default";
447 pinctrl-0 = <&pinctrl_i2c3>;
448 status = "okay";
449
450 tlv320aic3105: codec@18 {
451 compatible = "ti,tlv320aic3x";
452 reg = <0x18>;
453 reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
454 clocks = <&clks IMX6QDL_CLK_CKO>;
455 ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
456 /* Regulators */
457 DRVDD-supply = <&reg_3p3v>;
458 AVDD-supply = <&reg_3p3v>;
459 IOVDD-supply = <&reg_3p3v>;
460 DVDD-supply = <&reg_1p8v>;
461 };
462
463 accelerometer@1d {
464 compatible = "fsl,mma8451";
465 reg = <0x1d>;
466 interrupt-parent = <&gpio7>;
467 interrupts = <11 IRQ_TYPE_EDGE_RISING>;
468 interrupt-names = "INT2";
469 };
470
471 /* headphone detect */
472 ts3a227e@3b {
473 compatible = "ti,ts3a227e";
474 reg = <0x3b>;
475 interrupt-parent = <&gpio5>;
476 interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
477 ti,micbias = <4>; /* 2.5V micbias */
478 };
479};
480
481&ldb {
482 status = "okay";
483
484 lvds-channel@0 {
485 fsl,data-mapping = "spwg";
486 fsl,data-width = <18>;
487 status = "okay";
488
489 display-timings {
490 native-mode = <&timing0>;
491 timing0: g101evn010 {
492 clock-frequency = <68930000>;
493 hactive = <1280>;
494 vactive = <800>;
495 hback-porch = <220>;
496 hfront-porch = <40>;
497 vback-porch = <21>;
498 vfront-porch = <7>;
499 hsync-len = <60>;
500 vsync-len = <10>;
501 };
502 };
503 };
504};
505
506&pwm1 {
507 #pwm-cells = <2>;
508 pinctrl-names = "default";
509 pinctrl-0 = <&pinctrl_pwm1>;
510 status = "okay";
511};
512
513&ssi1 {
514 status = "okay";
515};
516
517&uart1 {
518 pinctrl-names = "default";
519 pinctrl-0 = <&pinctrl_uart1>;
520 status = "okay";
521};
522
523&uart2 {
524 pinctrl-names = "default";
525 pinctrl-0 = <&pinctrl_uart2>;
526 status = "okay";
527};
528
529&usbotg {
530 vbus-supply = <&reg_usb_otg_vbus>;
531 pinctrl-names = "default";
532 pinctrl-0 = <&pinctrl_usbotg>;
533 disable-over-current;
Tim Harvey13acc632021-03-01 14:33:31 -0800[diff] [blame]534 dr_mode = "host";
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]535 status = "okay";
536};
537
538&usbh1 {
539 vbus-supply = <&reg_usb_h1_vbus>;
540 status = "okay";
541};
542
543&usdhc1 {
544 pinctrl-names = "default";
545 pinctrl-0 = <&pinctrl_usdhc1_200mhz>;
546 vmmc-supply = <&reg_3p3v>;
547 non-removable;
548 bus-width = <4>;
549 status = "okay";
550};
551
552&usdhc2 {
553 pinctrl-names = "default", "state_100mhz", "state_200mhz";
554 pinctrl-0 = <&pinctrl_usdhc2>;
555 pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
556 pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
557 cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
558 vmmc-supply = <&reg_3p3v>;
559 max-frequency = <100000000>;
560 status = "okay";
561};
562
563&usdhc3 {
564 pinctrl-names = "default", "state_100mhz", "state_200mhz";
565 pinctrl-0 = <&pinctrl_usdhc3>;
566 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
567 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
568 non-removable;
569 vmmc-supply = <&reg_3p3v>;
570 keep-power-in-suspend;
571 status = "okay";
572};
573
574&wdog1 {
575 pinctrl-names = "default";
576 pinctrl-0 = <&pinctrl_wdog>;
577 fsl,ext-reset-output;
578};
579
580&iomuxc {
581 pinctrl_audmux: audmuxgrp {
582 fsl,pins = <
583 MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0
584 MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0
585 MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0
586 MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0
587 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* MCK */
588 >;
589 };
590
591 pinctrl_enet: enetgrp {
592 fsl,pins = <
593 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
594 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
595 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
596 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
597 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
598 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
599 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
600 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
601 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
602 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
603 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
604 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
605 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
606 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
607 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
608 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */
609 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0 /* PHY_EN */
610 >;
611 };
612
613 pinctrl_gpio_leds: gpioledsgrp {
614 fsl,pins = <
615 MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
616 >;
617 };
618
619 pinctrl_i2c1: i2c1grp {
620 fsl,pins = <
621 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
622 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
623 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
624 >;
625 };
626
627 pinctrl_i2c2: i2c2grp {
628 fsl,pins = <
629 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
630 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
631 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
632 >;
633 };
634
635 pinctrl_i2c3: i2c3grp {
636 fsl,pins = <
637 /* I2C3 */
638 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
639 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
640
641 /* Headphone Detect */
642 MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x0001b0b0 /* HPDET_IRQ# */
643 MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x0001b0b0 /* HPDET_MIC# */
644
645 /* Codec */
646 MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x0001b0b0 /* CODEC_RST# */
647
648 /* Touch Controller */
649 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b0b0 /* TOUCH_IRQ# */
650 MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b0b0 /* TOUCH_RST */
651
652 /* Stow Sensor */
653 MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x0001b0b0 /* ACCEL_IRQ2 */
654 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b0b0 /* ACCEL_IRQ1 */
655 >;
656 };
657
658 pinctrl_pwm1: pwm1grp {
659 fsl,pins = <
660 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
661 >;
662 };
663
664 pinctrl_uart1: uart1grp {
665 fsl,pins = <
666 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
667 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
668 MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b1 /* TXEN */
669 >;
670 };
671
672 pinctrl_uart2: uart2grp {
673 fsl,pins = <
674 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
675 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
676 >;
677 };
678
679 pinctrl_usbotg: usbotggrp {
680 fsl,pins = <
681 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
682 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x4001b0b0 /* PWR_EN */
683 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
684 >;
685 };
686
687 pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
688 fsl,pins = <
689 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x4001b0b0 /* EMMY_EN */
690 MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x4001b0b0 /* EMMY_CFG1# */
691 MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x4001b0b0 /* EMMY_CFG2# */
692 MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x0001b0b0 /* EMMY_BTWAKE# */
693 MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x0001b0b0 /* EMMY_WFWAKE# */
694
695 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
696 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x100f9
697 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
698 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
699 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
700 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
701 >;
702 };
703
704 pinctrl_usdhc2: usdhc2grp {
705 fsl,pins = <
706 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
707 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
708 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
709 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
710 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
711 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
712 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x17059 /* CD */
713 MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x17059
714 >;
715 };
716
717 pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
718 fsl,pins = <
719 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
720 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
721 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
722 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
723 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
724 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
725 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x170b9 /* CD */
726 MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x170b9
727 >;
728 };
729
730 pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
731 fsl,pins = <
732 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
733 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
734 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
735 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
736 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
737 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
738 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x170f9 /* CD */
739 MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x170f9
740 >;
741 };
742
743 pinctrl_usdhc3: usdhc3grp {
744 fsl,pins = <
745 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
746 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
747 MX6QDL_PAD_SD3_RST__SD3_RESET 0x10059
748 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
749 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
750 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
751 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
752 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
753 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
754 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
755 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
756 >;
757 };
758
759 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
760 fsl,pins = <
761 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
762 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
763 MX6QDL_PAD_SD3_RST__SD3_RESET 0x100b9
764 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
765 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
766 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
767 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
768 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
769 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
770 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
771 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
772 >;
773 };
774
775 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
776 fsl,pins = <
777 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
778 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
779 MX6QDL_PAD_SD3_RST__SD3_RESET 0x100f9
780 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
781 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
782 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
783 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
784 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
785 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
786 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
787 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
788 >;
789 };
790
791 pinctrl_wdog: wdoggrp {
792 fsl,pins = <
793 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
794 >;
795 };
796};