blob: 6e383cbe75f78faa3f86bd44a5eb4194f97f4dd1 [file] [log] [blame]
Tom Rini855ff8e2018-05-18 17:54:39 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Lukasz Majewskiee943652018-04-26 15:07:18 +02002/*
3 * Copyright (C) 2018
4 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
Lukasz Majewskiee943652018-04-26 15:07:18 +02005 */
6
7#ifndef __CONFIG_H_
8#define __CONFIG_H_
9
10#include <asm/arch/imx-regs.h>
11#include <linux/sizes.h>
12
Lukasz Majewskiee943652018-04-26 15:07:18 +020013/* USB Configs */
Tom Rinidd11fdc2022-12-04 10:04:56 -050014#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
15#define CFG_MXC_USB_FLAGS 0
Lukasz Majewskiee943652018-04-26 15:07:18 +020016
Lukasz Majewskiee943652018-04-26 15:07:18 +020017/* Command definition */
Lukasz Majewskiee943652018-04-26 15:07:18 +020018
Tom Rini0613c362022-12-04 10:03:50 -050019#define CFG_EXTRA_ENV_SETTINGS \
Lukasz Majewskiee943652018-04-26 15:07:18 +020020 "console=ttymxc1,115200\0" \
21 "fdt_addr=0x75000000\0" \
22 "fdt_high=0xffffffff\0" \
23 "scriptaddr=0x74000000\0" \
24 "kernel_file=fitImage\0"\
Lukasz Majewskie8d2f282018-05-20 08:33:17 +020025 "silent=1\0"\
Lukasz Majewskiee943652018-04-26 15:07:18 +020026 "rdinit=/sbin/init\0" \
27 "addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \
28 "upd_image=st.4k\0" \
29 "uboot_file=u-boot.imx\0" \
Lukasz Majewskia73b4b62019-05-08 16:26:22 +020030 "updargs=setenv bootargs console=${console} ${smp} ${displayargs}\0" \
31 "initrd_ram_dev=/dev/ram\0" \
32 "addswupdate=setenv bootargs ${bootargs} root=${initrd_ram_dev} rw\0" \
Lukasz Majewski5f6d63a2019-05-08 16:26:23 +020033 "addkeys=setenv bootargs ${bootargs} di=${dig_in} key1=${key1}\0" \
Lukasz Majewskiee943652018-04-26 15:07:18 +020034 "loadusb=usb start; " \
35 "fatload usb 0 ${loadaddr} ${upd_image}\0" \
36 "up=if tftp ${loadaddr} ${uboot_file}; then " \
37 "setexpr blkc ${filesize} / 0x200; " \
38 "setexpr blkc ${blkc} + 1; " \
39 "mmc write ${loadaddr} 0x2 ${blkc}" \
40 "; fi\0" \
Lukasz Majewskiddba5e52019-04-04 12:26:48 +020041 "upwic=setenv wic_file kp-image-kp${boardsoc}.wic; "\
Lukasz Majewskiee943652018-04-26 15:07:18 +020042 "if tftp ${loadaddr} ${wic_file}; then " \
43 "setexpr blkc ${filesize} / 0x200; " \
44 "setexpr blkc ${blkc} + 1; " \
45 "mmc write ${loadaddr} 0x0 ${blkc}" \
46 "; fi\0" \
47 "usbupd=echo Booting update from usb ...; " \
48 "setenv bootargs; " \
49 "run updargs; " \
Lukasz Majewskia73b4b62019-05-08 16:26:22 +020050 "run addinitrd; " \
51 "run addswupdate; " \
Lukasz Majewski5f6d63a2019-05-08 16:26:23 +020052 "run addkeys; " \
Lukasz Majewskiee943652018-04-26 15:07:18 +020053 "run loadusb; " \
54 "bootm ${loadaddr}#${fit_config}\0" \
55 BOOTENV
56
Lukasz Majewskiee943652018-04-26 15:07:18 +020057#define BOOT_TARGET_DEVICES(func) \
58 func(MMC, mmc, 0) \
59 func(DHCP, dhcp, na)
60
61#include <config_distro_bootcmd.h>
62
Lukasz Majewskiee943652018-04-26 15:07:18 +020063/* Miscellaneous configurable options */
Lukasz Majewskiee943652018-04-26 15:07:18 +020064
65/* Physical Memory Map */
Lukasz Majewskiee943652018-04-26 15:07:18 +020066#define PHYS_SDRAM_1 CSD0_BASE_ADDR
67#define PHYS_SDRAM_1_SIZE (512 * SZ_1M)
68#define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE)
69
Tom Riniaa6e94d2022-11-16 13:10:37 -050070#define CFG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
Tom Rini65cc0e22022-11-16 13:10:41 -050071#define CFG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
72#define CFG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
Lukasz Majewskiee943652018-04-26 15:07:18 +020073
Lukasz Majewskiee943652018-04-26 15:07:18 +020074/* environment organization */
Lukasz Majewskiee943652018-04-26 15:07:18 +020075
76#endif /* __CONFIG_H_ */