blob: 1a473e83efbfd8960ac0af7f25469d227caa2d3f [file] [log] [blame]
Peng Fan6301e652016-11-28 17:49:47 +08001/*
2 * Copyright 2014 Freescale Semiconductor, Inc.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9#include <dt-bindings/clock/imx6sx-clock.h>
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/input/input.h>
12#include <dt-bindings/interrupt-controller/arm-gic.h>
13#include "imx6sx-pinfunc.h"
14#include "skeleton.dtsi"
15
16/ {
17 aliases {
18 can0 = &flexcan1;
19 can1 = &flexcan2;
20 ethernet0 = &fec1;
21 ethernet1 = &fec2;
22 gpio0 = &gpio1;
23 gpio1 = &gpio2;
24 gpio2 = &gpio3;
25 gpio3 = &gpio4;
26 gpio4 = &gpio5;
27 gpio5 = &gpio6;
28 gpio6 = &gpio7;
29 i2c0 = &i2c1;
30 i2c1 = &i2c2;
31 i2c2 = &i2c3;
32 i2c3 = &i2c4;
33 mmc0 = &usdhc1;
34 mmc1 = &usdhc2;
35 mmc2 = &usdhc3;
36 mmc3 = &usdhc4;
37 serial0 = &uart1;
38 serial1 = &uart2;
39 serial2 = &uart3;
40 serial3 = &uart4;
41 serial4 = &uart5;
42 serial5 = &uart6;
43 spi0 = &ecspi1;
44 spi1 = &ecspi2;
45 spi2 = &ecspi3;
46 spi3 = &ecspi4;
47 spi4 = &ecspi5;
48 usbphy0 = &usbphy1;
49 usbphy1 = &usbphy2;
50 };
51
52 cpus {
53 #address-cells = <1>;
54 #size-cells = <0>;
55
56 cpu0: cpu@0 {
57 compatible = "arm,cortex-a9";
58 device_type = "cpu";
59 reg = <0>;
60 next-level-cache = <&L2>;
61 operating-points = <
62 /* kHz uV */
63 996000 1250000
64 792000 1175000
65 396000 1075000
66 198000 975000
67 >;
68 fsl,soc-operating-points = <
69 /* ARM kHz SOC uV */
70 996000 1175000
71 792000 1175000
72 396000 1175000
73 198000 1175000
74 >;
75 clock-latency = <61036>; /* two CLK32 periods */
76 clocks = <&clks IMX6SX_CLK_ARM>,
77 <&clks IMX6SX_CLK_PLL2_PFD2>,
78 <&clks IMX6SX_CLK_STEP>,
79 <&clks IMX6SX_CLK_PLL1_SW>,
80 <&clks IMX6SX_CLK_PLL1_SYS>;
81 clock-names = "arm", "pll2_pfd2_396m", "step",
82 "pll1_sw", "pll1_sys";
83 arm-supply = <&reg_arm>;
84 soc-supply = <&reg_soc>;
85 };
86 };
87
88 intc: interrupt-controller@00a01000 {
89 compatible = "arm,cortex-a9-gic";
90 #interrupt-cells = <3>;
91 interrupt-controller;
92 reg = <0x00a01000 0x1000>,
93 <0x00a00100 0x100>;
94 interrupt-parent = <&intc>;
95 };
96
97 clocks {
98 #address-cells = <1>;
99 #size-cells = <0>;
100
101 ckil: clock@0 {
102 compatible = "fixed-clock";
103 reg = <0>;
104 #clock-cells = <0>;
105 clock-frequency = <32768>;
106 clock-output-names = "ckil";
107 };
108
109 osc: clock@1 {
110 compatible = "fixed-clock";
111 reg = <1>;
112 #clock-cells = <0>;
113 clock-frequency = <24000000>;
114 clock-output-names = "osc";
115 };
116
117 ipp_di0: clock@2 {
118 compatible = "fixed-clock";
119 reg = <2>;
120 #clock-cells = <0>;
121 clock-frequency = <0>;
122 clock-output-names = "ipp_di0";
123 };
124
125 ipp_di1: clock@3 {
126 compatible = "fixed-clock";
127 reg = <3>;
128 #clock-cells = <0>;
129 clock-frequency = <0>;
130 clock-output-names = "ipp_di1";
131 };
132 };
133
134 soc {
135 #address-cells = <1>;
136 #size-cells = <1>;
137 compatible = "simple-bus";
138 interrupt-parent = <&gpc>;
139 ranges;
140
141 pmu {
142 compatible = "arm,cortex-a9-pmu";
143 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
144 };
145
146 ocram: sram@00900000 {
147 compatible = "mmio-sram";
148 reg = <0x00900000 0x20000>;
149 clocks = <&clks IMX6SX_CLK_OCRAM>;
150 };
151
152 L2: l2-cache@00a02000 {
153 compatible = "arm,pl310-cache";
154 reg = <0x00a02000 0x1000>;
155 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
156 cache-unified;
157 cache-level = <2>;
158 arm,tag-latency = <4 2 3>;
159 arm,data-latency = <4 2 3>;
160 };
161
162 gpu: gpu@01800000 {
163 compatible = "vivante,gc";
164 reg = <0x01800000 0x4000>;
165 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
166 clocks = <&clks IMX6SX_CLK_GPU>,
167 <&clks IMX6SX_CLK_GPU>,
168 <&clks IMX6SX_CLK_GPU>;
169 clock-names = "bus", "core", "shader";
170 };
171
172 dma_apbh: dma-apbh@01804000 {
173 compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
174 reg = <0x01804000 0x2000>;
175 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
176 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
177 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
178 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
179 interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
180 #dma-cells = <1>;
181 dma-channels = <4>;
182 clocks = <&clks IMX6SX_CLK_APBH_DMA>;
183 };
184
185 gpmi: gpmi-nand@01806000{
186 compatible = "fsl,imx6sx-gpmi-nand";
187 #address-cells = <1>;
188 #size-cells = <1>;
189 reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
190 reg-names = "gpmi-nand", "bch";
191 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
192 interrupt-names = "bch";
193 clocks = <&clks IMX6SX_CLK_GPMI_IO>,
194 <&clks IMX6SX_CLK_GPMI_APB>,
195 <&clks IMX6SX_CLK_GPMI_BCH>,
196 <&clks IMX6SX_CLK_GPMI_BCH_APB>,
197 <&clks IMX6SX_CLK_PER1_BCH>;
198 clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
199 "gpmi_bch_apb", "per1_bch";
200 dmas = <&dma_apbh 0>;
201 dma-names = "rx-tx";
202 status = "disabled";
203 };
204
205 aips1: aips-bus@02000000 {
206 compatible = "fsl,aips-bus", "simple-bus";
207 #address-cells = <1>;
208 #size-cells = <1>;
209 reg = <0x02000000 0x100000>;
210 ranges;
211
212 spba-bus@02000000 {
213 compatible = "fsl,spba-bus", "simple-bus";
214 #address-cells = <1>;
215 #size-cells = <1>;
216 reg = <0x02000000 0x40000>;
217 ranges;
218
219 spdif: spdif@02004000 {
220 compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
221 reg = <0x02004000 0x4000>;
222 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
223 dmas = <&sdma 14 18 0>,
224 <&sdma 15 18 0>;
225 dma-names = "rx", "tx";
226 clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>,
227 <&clks IMX6SX_CLK_OSC>,
228 <&clks IMX6SX_CLK_SPDIF>,
229 <&clks 0>, <&clks 0>, <&clks 0>,
230 <&clks IMX6SX_CLK_IPG>,
231 <&clks 0>, <&clks 0>,
232 <&clks IMX6SX_CLK_SPBA>;
233 clock-names = "core", "rxtx0",
234 "rxtx1", "rxtx2",
235 "rxtx3", "rxtx4",
236 "rxtx5", "rxtx6",
237 "rxtx7", "spba";
238 status = "disabled";
239 };
240
241 ecspi1: ecspi@02008000 {
242 #address-cells = <1>;
243 #size-cells = <0>;
244 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
245 reg = <0x02008000 0x4000>;
246 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
247 clocks = <&clks IMX6SX_CLK_ECSPI1>,
248 <&clks IMX6SX_CLK_ECSPI1>;
249 clock-names = "ipg", "per";
250 status = "disabled";
251 };
252
253 ecspi2: ecspi@0200c000 {
254 #address-cells = <1>;
255 #size-cells = <0>;
256 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
257 reg = <0x0200c000 0x4000>;
258 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
259 clocks = <&clks IMX6SX_CLK_ECSPI2>,
260 <&clks IMX6SX_CLK_ECSPI2>;
261 clock-names = "ipg", "per";
262 status = "disabled";
263 };
264
265 ecspi3: ecspi@02010000 {
266 #address-cells = <1>;
267 #size-cells = <0>;
268 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
269 reg = <0x02010000 0x4000>;
270 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
271 clocks = <&clks IMX6SX_CLK_ECSPI3>,
272 <&clks IMX6SX_CLK_ECSPI3>;
273 clock-names = "ipg", "per";
274 status = "disabled";
275 };
276
277 ecspi4: ecspi@02014000 {
278 #address-cells = <1>;
279 #size-cells = <0>;
280 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
281 reg = <0x02014000 0x4000>;
282 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
283 clocks = <&clks IMX6SX_CLK_ECSPI4>,
284 <&clks IMX6SX_CLK_ECSPI4>;
285 clock-names = "ipg", "per";
286 status = "disabled";
287 };
288
289 uart1: serial@02020000 {
290 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
291 reg = <0x02020000 0x4000>;
292 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
293 clocks = <&clks IMX6SX_CLK_UART_IPG>,
294 <&clks IMX6SX_CLK_UART_SERIAL>;
295 clock-names = "ipg", "per";
296 dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
297 dma-names = "rx", "tx";
298 status = "disabled";
299 };
300
301 esai: esai@02024000 {
302 reg = <0x02024000 0x4000>;
303 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
304 clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
305 <&clks IMX6SX_CLK_ESAI_MEM>,
306 <&clks IMX6SX_CLK_ESAI_EXTAL>,
307 <&clks IMX6SX_CLK_ESAI_IPG>,
308 <&clks IMX6SX_CLK_SPBA>;
309 clock-names = "core", "mem", "extal",
310 "fsys", "spba";
311 status = "disabled";
312 };
313
314 ssi1: ssi@02028000 {
315 #sound-dai-cells = <0>;
316 compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
317 reg = <0x02028000 0x4000>;
318 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
319 clocks = <&clks IMX6SX_CLK_SSI1_IPG>,
320 <&clks IMX6SX_CLK_SSI1>;
321 clock-names = "ipg", "baud";
322 dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
323 dma-names = "rx", "tx";
324 fsl,fifo-depth = <15>;
325 status = "disabled";
326 };
327
328 ssi2: ssi@0202c000 {
329 #sound-dai-cells = <0>;
330 compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
331 reg = <0x0202c000 0x4000>;
332 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
333 clocks = <&clks IMX6SX_CLK_SSI2_IPG>,
334 <&clks IMX6SX_CLK_SSI2>;
335 clock-names = "ipg", "baud";
336 dmas = <&sdma 41 1 0>, <&sdma 42 1 0>;
337 dma-names = "rx", "tx";
338 fsl,fifo-depth = <15>;
339 status = "disabled";
340 };
341
342 ssi3: ssi@02030000 {
343 #sound-dai-cells = <0>;
344 compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
345 reg = <0x02030000 0x4000>;
346 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
347 clocks = <&clks IMX6SX_CLK_SSI3_IPG>,
348 <&clks IMX6SX_CLK_SSI3>;
349 clock-names = "ipg", "baud";
350 dmas = <&sdma 45 1 0>, <&sdma 46 1 0>;
351 dma-names = "rx", "tx";
352 fsl,fifo-depth = <15>;
353 status = "disabled";
354 };
355
356 asrc: asrc@02034000 {
357 reg = <0x02034000 0x4000>;
358 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
359 clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
360 <&clks IMX6SX_CLK_ASRC_IPG>,
361 <&clks IMX6SX_CLK_SPDIF>,
362 <&clks IMX6SX_CLK_SPBA>;
363 clock-names = "mem", "ipg", "asrck", "spba";
364 dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
365 <&sdma 19 20 1>, <&sdma 20 20 1>,
366 <&sdma 21 20 1>, <&sdma 22 20 1>;
367 dma-names = "rxa", "rxb", "rxc",
368 "txa", "txb", "txc";
369 status = "okay";
370 };
371 };
372
373 pwm1: pwm@02080000 {
374 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
375 reg = <0x02080000 0x4000>;
376 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
377 clocks = <&clks IMX6SX_CLK_PWM1>,
378 <&clks IMX6SX_CLK_PWM1>;
379 clock-names = "ipg", "per";
380 #pwm-cells = <2>;
381 };
382
383 pwm2: pwm@02084000 {
384 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
385 reg = <0x02084000 0x4000>;
386 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
387 clocks = <&clks IMX6SX_CLK_PWM2>,
388 <&clks IMX6SX_CLK_PWM2>;
389 clock-names = "ipg", "per";
390 #pwm-cells = <2>;
391 };
392
393 pwm3: pwm@02088000 {
394 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
395 reg = <0x02088000 0x4000>;
396 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
397 clocks = <&clks IMX6SX_CLK_PWM3>,
398 <&clks IMX6SX_CLK_PWM3>;
399 clock-names = "ipg", "per";
400 #pwm-cells = <2>;
401 };
402
403 pwm4: pwm@0208c000 {
404 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
405 reg = <0x0208c000 0x4000>;
406 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
407 clocks = <&clks IMX6SX_CLK_PWM4>,
408 <&clks IMX6SX_CLK_PWM4>;
409 clock-names = "ipg", "per";
410 #pwm-cells = <2>;
411 };
412
413 flexcan1: can@02090000 {
414 compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
415 reg = <0x02090000 0x4000>;
416 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
417 clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
418 <&clks IMX6SX_CLK_CAN1_SERIAL>;
419 clock-names = "ipg", "per";
420 status = "disabled";
421 };
422
423 flexcan2: can@02094000 {
424 compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
425 reg = <0x02094000 0x4000>;
426 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
427 clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
428 <&clks IMX6SX_CLK_CAN2_SERIAL>;
429 clock-names = "ipg", "per";
430 status = "disabled";
431 };
432
433 gpt: gpt@02098000 {
434 compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt";
435 reg = <0x02098000 0x4000>;
436 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
437 clocks = <&clks IMX6SX_CLK_GPT_BUS>,
438 <&clks IMX6SX_CLK_GPT_3M>;
439 clock-names = "ipg", "per";
440 };
441
442 gpio1: gpio@0209c000 {
443 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
444 reg = <0x0209c000 0x4000>;
445 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
446 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
447 gpio-controller;
448 #gpio-cells = <2>;
449 interrupt-controller;
450 #interrupt-cells = <2>;
451 gpio-ranges = <&iomuxc 0 5 26>;
452 };
453
454 gpio2: gpio@020a0000 {
455 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
456 reg = <0x020a0000 0x4000>;
457 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
458 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
459 gpio-controller;
460 #gpio-cells = <2>;
461 interrupt-controller;
462 #interrupt-cells = <2>;
463 gpio-ranges = <&iomuxc 0 31 20>;
464 };
465
466 gpio3: gpio@020a4000 {
467 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
468 reg = <0x020a4000 0x4000>;
469 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
470 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
471 gpio-controller;
472 #gpio-cells = <2>;
473 interrupt-controller;
474 #interrupt-cells = <2>;
475 gpio-ranges = <&iomuxc 0 51 29>;
476 };
477
478 gpio4: gpio@020a8000 {
479 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
480 reg = <0x020a8000 0x4000>;
481 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
482 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
483 gpio-controller;
484 #gpio-cells = <2>;
485 interrupt-controller;
486 #interrupt-cells = <2>;
487 gpio-ranges = <&iomuxc 0 80 32>;
488 };
489
490 gpio5: gpio@020ac000 {
491 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
492 reg = <0x020ac000 0x4000>;
493 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
494 <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
495 gpio-controller;
496 #gpio-cells = <2>;
497 interrupt-controller;
498 #interrupt-cells = <2>;
499 gpio-ranges = <&iomuxc 0 112 24>;
500 };
501
502 gpio6: gpio@020b0000 {
503 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
504 reg = <0x020b0000 0x4000>;
505 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
506 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
507 gpio-controller;
508 #gpio-cells = <2>;
509 interrupt-controller;
510 #interrupt-cells = <2>;
511 gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>;
512 };
513
514 gpio7: gpio@020b4000 {
515 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
516 reg = <0x020b4000 0x4000>;
517 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
518 <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
519 gpio-controller;
520 #gpio-cells = <2>;
521 interrupt-controller;
522 #interrupt-cells = <2>;
523 gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
524 };
525
526 kpp: kpp@020b8000 {
527 compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
528 reg = <0x020b8000 0x4000>;
529 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
530 clocks = <&clks IMX6SX_CLK_DUMMY>;
531 status = "disabled";
532 };
533
534 wdog1: wdog@020bc000 {
535 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
536 reg = <0x020bc000 0x4000>;
537 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
538 clocks = <&clks IMX6SX_CLK_DUMMY>;
539 };
540
541 wdog2: wdog@020c0000 {
542 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
543 reg = <0x020c0000 0x4000>;
544 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
545 clocks = <&clks IMX6SX_CLK_DUMMY>;
546 status = "disabled";
547 };
548
549 clks: ccm@020c4000 {
550 compatible = "fsl,imx6sx-ccm";
551 reg = <0x020c4000 0x4000>;
552 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
553 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
554 #clock-cells = <1>;
555 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
556 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
557 };
558
559 anatop: anatop@020c8000 {
560 compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
561 "syscon", "simple-bus";
562 reg = <0x020c8000 0x1000>;
563 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
564 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
565 <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
566
567 regulator-1p1 {
568 compatible = "fsl,anatop-regulator";
569 regulator-name = "vdd1p1";
570 regulator-min-microvolt = <800000>;
571 regulator-max-microvolt = <1375000>;
572 regulator-always-on;
573 anatop-reg-offset = <0x110>;
574 anatop-vol-bit-shift = <8>;
575 anatop-vol-bit-width = <5>;
576 anatop-min-bit-val = <4>;
577 anatop-min-voltage = <800000>;
578 anatop-max-voltage = <1375000>;
579 };
580
581 regulator-3p0 {
582 compatible = "fsl,anatop-regulator";
583 regulator-name = "vdd3p0";
584 regulator-min-microvolt = <2800000>;
585 regulator-max-microvolt = <3150000>;
586 regulator-always-on;
587 anatop-reg-offset = <0x120>;
588 anatop-vol-bit-shift = <8>;
589 anatop-vol-bit-width = <5>;
590 anatop-min-bit-val = <0>;
591 anatop-min-voltage = <2625000>;
592 anatop-max-voltage = <3400000>;
593 };
594
595 regulator-2p5 {
596 compatible = "fsl,anatop-regulator";
597 regulator-name = "vdd2p5";
598 regulator-min-microvolt = <2100000>;
599 regulator-max-microvolt = <2875000>;
600 regulator-always-on;
601 anatop-reg-offset = <0x130>;
602 anatop-vol-bit-shift = <8>;
603 anatop-vol-bit-width = <5>;
604 anatop-min-bit-val = <0>;
605 anatop-min-voltage = <2100000>;
606 anatop-max-voltage = <2875000>;
607 };
608
609 reg_arm: regulator-vddcore {
610 compatible = "fsl,anatop-regulator";
611 regulator-name = "vddarm";
612 regulator-min-microvolt = <725000>;
613 regulator-max-microvolt = <1450000>;
614 regulator-always-on;
615 anatop-reg-offset = <0x140>;
616 anatop-vol-bit-shift = <0>;
617 anatop-vol-bit-width = <5>;
618 anatop-delay-reg-offset = <0x170>;
619 anatop-delay-bit-shift = <24>;
620 anatop-delay-bit-width = <2>;
621 anatop-min-bit-val = <1>;
622 anatop-min-voltage = <725000>;
623 anatop-max-voltage = <1450000>;
624 };
625
626 reg_pcie: regulator-vddpcie {
627 compatible = "fsl,anatop-regulator";
628 regulator-name = "vddpcie";
629 regulator-min-microvolt = <725000>;
630 regulator-max-microvolt = <1450000>;
631 anatop-reg-offset = <0x140>;
632 anatop-vol-bit-shift = <9>;
633 anatop-vol-bit-width = <5>;
634 anatop-delay-reg-offset = <0x170>;
635 anatop-delay-bit-shift = <26>;
636 anatop-delay-bit-width = <2>;
637 anatop-min-bit-val = <1>;
638 anatop-min-voltage = <725000>;
639 anatop-max-voltage = <1450000>;
640 };
641
642 reg_soc: regulator-vddsoc {
643 compatible = "fsl,anatop-regulator";
644 regulator-name = "vddsoc";
645 regulator-min-microvolt = <725000>;
646 regulator-max-microvolt = <1450000>;
647 regulator-always-on;
648 anatop-reg-offset = <0x140>;
649 anatop-vol-bit-shift = <18>;
650 anatop-vol-bit-width = <5>;
651 anatop-delay-reg-offset = <0x170>;
652 anatop-delay-bit-shift = <28>;
653 anatop-delay-bit-width = <2>;
654 anatop-min-bit-val = <1>;
655 anatop-min-voltage = <725000>;
656 anatop-max-voltage = <1450000>;
657 };
658 };
659
660 tempmon: tempmon {
661 compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
662 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
663 fsl,tempmon = <&anatop>;
664 fsl,tempmon-data = <&ocotp>;
665 clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
666 };
667
668 usbphy1: usbphy@020c9000 {
669 compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
670 reg = <0x020c9000 0x1000>;
671 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
672 clocks = <&clks IMX6SX_CLK_USBPHY1>;
673 fsl,anatop = <&anatop>;
674 };
675
676 usbphy2: usbphy@020ca000 {
677 compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
678 reg = <0x020ca000 0x1000>;
679 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
680 clocks = <&clks IMX6SX_CLK_USBPHY2>;
681 fsl,anatop = <&anatop>;
682 };
683
684 snvs: snvs@020cc000 {
685 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
686 reg = <0x020cc000 0x4000>;
687
688 snvs_rtc: snvs-rtc-lp {
689 compatible = "fsl,sec-v4.0-mon-rtc-lp";
690 regmap = <&snvs>;
691 offset = <0x34>;
692 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
693 };
694
695 snvs_poweroff: snvs-poweroff {
696 compatible = "syscon-poweroff";
697 regmap = <&snvs>;
698 offset = <0x38>;
699 mask = <0x60>;
700 status = "disabled";
701 };
702
703 snvs_pwrkey: snvs-powerkey {
704 compatible = "fsl,sec-v4.0-pwrkey";
705 regmap = <&snvs>;
706 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
707 linux,keycode = <KEY_POWER>;
708 wakeup-source;
709 };
710 };
711
712 epit1: epit@020d0000 {
713 reg = <0x020d0000 0x4000>;
714 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
715 };
716
717 epit2: epit@020d4000 {
718 reg = <0x020d4000 0x4000>;
719 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
720 };
721
722 src: src@020d8000 {
723 compatible = "fsl,imx6sx-src", "fsl,imx51-src";
724 reg = <0x020d8000 0x4000>;
725 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
726 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
727 #reset-cells = <1>;
728 };
729
730 gpc: gpc@020dc000 {
731 compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
732 reg = <0x020dc000 0x4000>;
733 interrupt-controller;
734 #interrupt-cells = <3>;
735 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
736 interrupt-parent = <&intc>;
737 };
738
739 iomuxc: iomuxc@020e0000 {
740 compatible = "fsl,imx6sx-iomuxc";
741 reg = <0x020e0000 0x4000>;
742 };
743
744 gpr: iomuxc-gpr@020e4000 {
745 compatible = "fsl,imx6sx-iomuxc-gpr",
746 "fsl,imx6q-iomuxc-gpr", "syscon";
747 reg = <0x020e4000 0x4000>;
748 };
749
750 sdma: sdma@020ec000 {
751 compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
752 reg = <0x020ec000 0x4000>;
753 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
754 clocks = <&clks IMX6SX_CLK_SDMA>,
755 <&clks IMX6SX_CLK_SDMA>;
756 clock-names = "ipg", "ahb";
757 #dma-cells = <3>;
758 /* imx6sx reuses imx6q sdma firmware */
759 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
760 };
761 };
762
763 aips2: aips-bus@02100000 {
764 compatible = "fsl,aips-bus", "simple-bus";
765 #address-cells = <1>;
766 #size-cells = <1>;
767 reg = <0x02100000 0x100000>;
768 ranges;
769
770 crypto: caam@2100000 {
771 compatible = "fsl,sec-v4.0";
772 fsl,sec-era = <4>;
773 #address-cells = <1>;
774 #size-cells = <1>;
775 reg = <0x2100000 0x10000>;
776 ranges = <0 0x2100000 0x10000>;
777 interrupt-parent = <&intc>;
778 clocks = <&clks IMX6SX_CLK_CAAM_MEM>,
779 <&clks IMX6SX_CLK_CAAM_ACLK>,
780 <&clks IMX6SX_CLK_CAAM_IPG>,
781 <&clks IMX6SX_CLK_EIM_SLOW>;
782 clock-names = "mem", "aclk", "ipg", "emi_slow";
783
784 sec_jr0: jr0@1000 {
785 compatible = "fsl,sec-v4.0-job-ring";
786 reg = <0x1000 0x1000>;
787 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
788 };
789
790 sec_jr1: jr1@2000 {
791 compatible = "fsl,sec-v4.0-job-ring";
792 reg = <0x2000 0x1000>;
793 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
794 };
795 };
796
797 usbotg1: usb@02184000 {
798 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
799 reg = <0x02184000 0x200>;
800 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
801 clocks = <&clks IMX6SX_CLK_USBOH3>;
802 fsl,usbphy = <&usbphy1>;
803 fsl,usbmisc = <&usbmisc 0>;
804 fsl,anatop = <&anatop>;
805 ahb-burst-config = <0x0>;
806 tx-burst-size-dword = <0x10>;
807 rx-burst-size-dword = <0x10>;
808 status = "disabled";
809 };
810
811 usbotg2: usb@02184200 {
812 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
813 reg = <0x02184200 0x200>;
814 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
815 clocks = <&clks IMX6SX_CLK_USBOH3>;
816 fsl,usbphy = <&usbphy2>;
817 fsl,usbmisc = <&usbmisc 1>;
818 ahb-burst-config = <0x0>;
819 tx-burst-size-dword = <0x10>;
820 rx-burst-size-dword = <0x10>;
821 status = "disabled";
822 };
823
824 usbh: usb@02184400 {
825 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
826 reg = <0x02184400 0x200>;
827 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
828 clocks = <&clks IMX6SX_CLK_USBOH3>;
829 fsl,usbmisc = <&usbmisc 2>;
830 phy_type = "hsic";
831 fsl,anatop = <&anatop>;
832 dr_mode = "host";
833 ahb-burst-config = <0x0>;
834 tx-burst-size-dword = <0x10>;
835 rx-burst-size-dword = <0x10>;
836 status = "disabled";
837 };
838
839 usbmisc: usbmisc@02184800 {
840 #index-cells = <1>;
841 compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc";
842 reg = <0x02184800 0x200>;
843 clocks = <&clks IMX6SX_CLK_USBOH3>;
844 };
845
846 fec1: ethernet@02188000 {
847 compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
848 reg = <0x02188000 0x4000>;
849 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
850 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
851 clocks = <&clks IMX6SX_CLK_ENET>,
852 <&clks IMX6SX_CLK_ENET_AHB>,
853 <&clks IMX6SX_CLK_ENET_PTP>,
854 <&clks IMX6SX_CLK_ENET_REF>,
855 <&clks IMX6SX_CLK_ENET_PTP>;
856 clock-names = "ipg", "ahb", "ptp",
857 "enet_clk_ref", "enet_out";
858 fsl,num-tx-queues=<3>;
859 fsl,num-rx-queues=<3>;
860 status = "disabled";
861 };
862
863 mlb: mlb@0218c000 {
864 reg = <0x0218c000 0x4000>;
865 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
866 <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
867 <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
868 clocks = <&clks IMX6SX_CLK_MLB>;
869 status = "disabled";
870 };
871
872 usdhc1: usdhc@02190000 {
873 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
874 reg = <0x02190000 0x4000>;
875 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
876 clocks = <&clks IMX6SX_CLK_USDHC1>,
877 <&clks IMX6SX_CLK_USDHC1>,
878 <&clks IMX6SX_CLK_USDHC1>;
879 clock-names = "ipg", "ahb", "per";
880 bus-width = <4>;
881 status = "disabled";
882 };
883
884 usdhc2: usdhc@02194000 {
885 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
886 reg = <0x02194000 0x4000>;
887 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
888 clocks = <&clks IMX6SX_CLK_USDHC2>,
889 <&clks IMX6SX_CLK_USDHC2>,
890 <&clks IMX6SX_CLK_USDHC2>;
891 clock-names = "ipg", "ahb", "per";
892 bus-width = <4>;
893 status = "disabled";
894 };
895
896 usdhc3: usdhc@02198000 {
897 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
898 reg = <0x02198000 0x4000>;
899 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
900 clocks = <&clks IMX6SX_CLK_USDHC3>,
901 <&clks IMX6SX_CLK_USDHC3>,
902 <&clks IMX6SX_CLK_USDHC3>;
903 clock-names = "ipg", "ahb", "per";
904 bus-width = <4>;
905 status = "disabled";
906 };
907
908 usdhc4: usdhc@0219c000 {
909 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
910 reg = <0x0219c000 0x4000>;
911 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
912 clocks = <&clks IMX6SX_CLK_USDHC4>,
913 <&clks IMX6SX_CLK_USDHC4>,
914 <&clks IMX6SX_CLK_USDHC4>;
915 clock-names = "ipg", "ahb", "per";
916 bus-width = <4>;
917 status = "disabled";
918 };
919
920 i2c1: i2c@021a0000 {
921 #address-cells = <1>;
922 #size-cells = <0>;
923 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
924 reg = <0x021a0000 0x4000>;
925 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
926 clocks = <&clks IMX6SX_CLK_I2C1>;
927 status = "disabled";
928 };
929
930 i2c2: i2c@021a4000 {
931 #address-cells = <1>;
932 #size-cells = <0>;
933 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
934 reg = <0x021a4000 0x4000>;
935 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
936 clocks = <&clks IMX6SX_CLK_I2C2>;
937 status = "disabled";
938 };
939
940 i2c3: i2c@021a8000 {
941 #address-cells = <1>;
942 #size-cells = <0>;
943 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
944 reg = <0x021a8000 0x4000>;
945 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
946 clocks = <&clks IMX6SX_CLK_I2C3>;
947 status = "disabled";
948 };
949
950 mmdc: mmdc@021b0000 {
951 compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
952 reg = <0x021b0000 0x4000>;
953 };
954
955 fec2: ethernet@021b4000 {
956 compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
957 reg = <0x021b4000 0x4000>;
958 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
959 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
960 clocks = <&clks IMX6SX_CLK_ENET>,
961 <&clks IMX6SX_CLK_ENET_AHB>,
962 <&clks IMX6SX_CLK_ENET_PTP>,
963 <&clks IMX6SX_CLK_ENET2_REF_125M>,
964 <&clks IMX6SX_CLK_ENET_PTP>;
965 clock-names = "ipg", "ahb", "ptp",
966 "enet_clk_ref", "enet_out";
967 status = "disabled";
968 };
969
970 weim: weim@021b8000 {
971 compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
972 reg = <0x021b8000 0x4000>;
973 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
974 clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
975 };
976
977 ocotp: ocotp@021bc000 {
978 compatible = "fsl,imx6sx-ocotp", "syscon";
979 reg = <0x021bc000 0x4000>;
980 clocks = <&clks IMX6SX_CLK_OCOTP>;
981 };
982
983 sai1: sai@021d4000 {
984 compatible = "fsl,imx6sx-sai";
985 reg = <0x021d4000 0x4000>;
986 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
987 clocks = <&clks IMX6SX_CLK_SAI1_IPG>,
988 <&clks IMX6SX_CLK_SAI1>,
989 <&clks 0>, <&clks 0>;
990 clock-names = "bus", "mclk1", "mclk2", "mclk3";
991 dma-names = "rx", "tx";
992 dmas = <&sdma 31 24 0>, <&sdma 32 24 0>;
993 status = "disabled";
994 };
995
996 audmux: audmux@021d8000 {
997 compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
998 reg = <0x021d8000 0x4000>;
999 status = "disabled";
1000 };
1001
1002 sai2: sai@021dc000 {
1003 compatible = "fsl,imx6sx-sai";
1004 reg = <0x021dc000 0x4000>;
1005 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1006 clocks = <&clks IMX6SX_CLK_SAI2_IPG>,
1007 <&clks IMX6SX_CLK_SAI2>,
1008 <&clks 0>, <&clks 0>;
1009 clock-names = "bus", "mclk1", "mclk2", "mclk3";
1010 dma-names = "rx", "tx";
1011 dmas = <&sdma 33 24 0>, <&sdma 34 24 0>;
1012 status = "disabled";
1013 };
1014
1015 qspi1: qspi@021e0000 {
1016 #address-cells = <1>;
1017 #size-cells = <0>;
1018 compatible = "fsl,imx6sx-qspi";
1019 reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
1020 reg-names = "QuadSPI", "QuadSPI-memory";
1021 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1022 clocks = <&clks IMX6SX_CLK_QSPI1>,
1023 <&clks IMX6SX_CLK_QSPI1>;
1024 clock-names = "qspi_en", "qspi";
1025 status = "disabled";
1026 };
1027
1028 qspi2: qspi@021e4000 {
1029 #address-cells = <1>;
1030 #size-cells = <0>;
1031 compatible = "fsl,imx6sx-qspi";
1032 reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>;
1033 reg-names = "QuadSPI", "QuadSPI-memory";
1034 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
1035 clocks = <&clks IMX6SX_CLK_QSPI2>,
1036 <&clks IMX6SX_CLK_QSPI2>;
1037 clock-names = "qspi_en", "qspi";
1038 status = "disabled";
1039 };
1040
1041 uart2: serial@021e8000 {
1042 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
1043 reg = <0x021e8000 0x4000>;
1044 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
1045 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1046 <&clks IMX6SX_CLK_UART_SERIAL>;
1047 clock-names = "ipg", "per";
1048 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
1049 dma-names = "rx", "tx";
1050 status = "disabled";
1051 };
1052
1053 uart3: serial@021ec000 {
1054 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
1055 reg = <0x021ec000 0x4000>;
1056 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
1057 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1058 <&clks IMX6SX_CLK_UART_SERIAL>;
1059 clock-names = "ipg", "per";
1060 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
1061 dma-names = "rx", "tx";
1062 status = "disabled";
1063 };
1064
1065 uart4: serial@021f0000 {
1066 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
1067 reg = <0x021f0000 0x4000>;
1068 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1069 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1070 <&clks IMX6SX_CLK_UART_SERIAL>;
1071 clock-names = "ipg", "per";
1072 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
1073 dma-names = "rx", "tx";
1074 status = "disabled";
1075 };
1076
1077 uart5: serial@021f4000 {
1078 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
1079 reg = <0x021f4000 0x4000>;
1080 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
1081 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1082 <&clks IMX6SX_CLK_UART_SERIAL>;
1083 clock-names = "ipg", "per";
1084 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
1085 dma-names = "rx", "tx";
1086 status = "disabled";
1087 };
1088
1089 i2c4: i2c@021f8000 {
1090 #address-cells = <1>;
1091 #size-cells = <0>;
1092 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
1093 reg = <0x021f8000 0x4000>;
1094 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
1095 clocks = <&clks IMX6SX_CLK_I2C4>;
1096 status = "disabled";
1097 };
1098 };
1099
1100 aips3: aips-bus@02200000 {
1101 compatible = "fsl,aips-bus", "simple-bus";
1102 #address-cells = <1>;
1103 #size-cells = <1>;
1104 reg = <0x02200000 0x100000>;
1105 ranges;
1106
1107 spba-bus@02200000 {
1108 compatible = "fsl,spba-bus", "simple-bus";
1109 #address-cells = <1>;
1110 #size-cells = <1>;
1111 reg = <0x02240000 0x40000>;
1112 ranges;
1113
1114 csi1: csi@02214000 {
1115 reg = <0x02214000 0x4000>;
1116 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1117 clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
1118 <&clks IMX6SX_CLK_CSI>,
1119 <&clks IMX6SX_CLK_DCIC1>;
1120 clock-names = "disp-axi", "csi_mclk", "dcic";
1121 status = "disabled";
1122 };
1123
1124 pxp: pxp@02218000 {
1125 reg = <0x02218000 0x4000>;
1126 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
1127 clocks = <&clks IMX6SX_CLK_PXP_AXI>,
1128 <&clks IMX6SX_CLK_DISPLAY_AXI>;
1129 clock-names = "pxp-axi", "disp-axi";
1130 status = "disabled";
1131 };
1132
1133 csi2: csi@0221c000 {
1134 reg = <0x0221c000 0x4000>;
1135 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1136 clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
1137 <&clks IMX6SX_CLK_CSI>,
1138 <&clks IMX6SX_CLK_DCIC2>;
1139 clock-names = "disp-axi", "csi_mclk", "dcic";
1140 status = "disabled";
1141 };
1142
1143 lcdif1: lcdif@02220000 {
1144 compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
1145 reg = <0x02220000 0x4000>;
1146 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
1147 clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
1148 <&clks IMX6SX_CLK_LCDIF_APB>,
1149 <&clks IMX6SX_CLK_DISPLAY_AXI>;
1150 clock-names = "pix", "axi", "disp_axi";
1151 status = "disabled";
1152 };
1153
1154 lcdif2: lcdif@02224000 {
1155 compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
1156 reg = <0x02224000 0x4000>;
1157 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1158 clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
1159 <&clks IMX6SX_CLK_LCDIF_APB>,
1160 <&clks IMX6SX_CLK_DISPLAY_AXI>;
1161 clock-names = "pix", "axi", "disp_axi";
1162 status = "disabled";
1163 };
1164
1165 vadc: vadc@02228000 {
1166 reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
1167 reg-names = "vadc-vafe", "vadc-vdec";
1168 clocks = <&clks IMX6SX_CLK_VADC>,
1169 <&clks IMX6SX_CLK_CSI>;
1170 clock-names = "vadc", "csi";
1171 status = "disabled";
1172 };
1173 };
1174
1175 adc1: adc@02280000 {
1176 compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
1177 reg = <0x02280000 0x4000>;
1178 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
1179 clocks = <&clks IMX6SX_CLK_IPG>;
1180 clock-names = "adc";
1181 fsl,adck-max-frequency = <30000000>, <40000000>,
1182 <20000000>;
1183 status = "disabled";
1184 };
1185
1186 adc2: adc@02284000 {
1187 compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
1188 reg = <0x02284000 0x4000>;
1189 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1190 clocks = <&clks IMX6SX_CLK_IPG>;
1191 clock-names = "adc";
1192 fsl,adck-max-frequency = <30000000>, <40000000>,
1193 <20000000>;
1194 status = "disabled";
1195 };
1196
1197 wdog3: wdog@02288000 {
1198 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
1199 reg = <0x02288000 0x4000>;
1200 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1201 clocks = <&clks IMX6SX_CLK_DUMMY>;
1202 status = "disabled";
1203 };
1204
1205 ecspi5: ecspi@0228c000 {
1206 #address-cells = <1>;
1207 #size-cells = <0>;
1208 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
1209 reg = <0x0228c000 0x4000>;
1210 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
1211 clocks = <&clks IMX6SX_CLK_ECSPI5>,
1212 <&clks IMX6SX_CLK_ECSPI5>;
1213 clock-names = "ipg", "per";
1214 status = "disabled";
1215 };
1216
1217 uart6: serial@022a0000 {
1218 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
1219 reg = <0x022a0000 0x4000>;
1220 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
1221 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1222 <&clks IMX6SX_CLK_UART_SERIAL>;
1223 clock-names = "ipg", "per";
1224 dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
1225 dma-names = "rx", "tx";
1226 status = "disabled";
1227 };
1228
1229 pwm5: pwm@022a4000 {
1230 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1231 reg = <0x022a4000 0x4000>;
1232 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
1233 clocks = <&clks IMX6SX_CLK_PWM5>,
1234 <&clks IMX6SX_CLK_PWM5>;
1235 clock-names = "ipg", "per";
1236 #pwm-cells = <2>;
1237 };
1238
1239 pwm6: pwm@022a8000 {
1240 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1241 reg = <0x022a8000 0x4000>;
1242 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
1243 clocks = <&clks IMX6SX_CLK_PWM6>,
1244 <&clks IMX6SX_CLK_PWM6>;
1245 clock-names = "ipg", "per";
1246 #pwm-cells = <2>;
1247 };
1248
1249 pwm7: pwm@022ac000 {
1250 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1251 reg = <0x022ac000 0x4000>;
1252 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
1253 clocks = <&clks IMX6SX_CLK_PWM7>,
1254 <&clks IMX6SX_CLK_PWM7>;
1255 clock-names = "ipg", "per";
1256 #pwm-cells = <2>;
1257 };
1258
1259 pwm8: pwm@0022b0000 {
1260 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1261 reg = <0x0022b0000 0x4000>;
1262 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
1263 clocks = <&clks IMX6SX_CLK_PWM8>,
1264 <&clks IMX6SX_CLK_PWM8>;
1265 clock-names = "ipg", "per";
1266 #pwm-cells = <2>;
1267 };
1268 };
1269
1270 pcie: pcie@0x08000000 {
1271 compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
1272 reg = <0x08ffc000 0x4000>; /* DBI */
1273 #address-cells = <3>;
1274 #size-cells = <2>;
1275 device_type = "pci";
1276 /* configuration space */
1277 ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000
1278 /* downstream I/O */
1279 0x81000000 0 0 0x08f80000 0 0x00010000
1280 /* non-prefetchable memory */
1281 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>;
1282 num-lanes = <1>;
1283 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
1284 clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>,
1285 <&clks IMX6SX_CLK_PCIE_AXI>,
1286 <&clks IMX6SX_CLK_LVDS1_OUT>,
1287 <&clks IMX6SX_CLK_DISPLAY_AXI>;
1288 clock-names = "pcie_ref_125m", "pcie_axi",
1289 "lvds_gate", "display_axi";
1290 status = "disabled";
1291 };
1292 };
1293
1294 gpu-subsystem {
1295 compatible = "fsl,imx-gpu-subsystem";
1296 cores = <&gpu>;
1297 };
1298};