blob: 0458164ef186c347b3c783eef28390f90ddfdba6 [file] [log] [blame]
wdenk3a473b22004-01-03 00:43:19 +00001/*
2 * (C) Copyright 2003
3 * Ingo Assmus <ingo.assmus@keymile.com>
4 *
5 * based on - Driver for MV64460X ethernet ports
6 * Copyright (C) 2002 rabeeh@galileo.co.il
7 *
8 * See file CREDITS for list of people who contributed to this
9 * project.
10 *
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 * MA 02111-1307 USA
25 */
26
27/*
28 * mv_eth.c - header file for the polled mode GT ethernet driver
29 */
30#include <common.h>
31#include <net.h>
32#include <malloc.h>
33
34#include "mv_eth.h"
35
36/* enable Debug outputs */
37
38#undef DEBUG_MV_ETH
39
40#ifdef DEBUG_MV_ETH
41#define DEBUG
42#define DP(x) x
43#else
44#define DP(x)
45#endif
46
47#undef MV64460_CHECKSUM_OFFLOAD
48/*************************************************************************
49**************************************************************************
50**************************************************************************
51* The first part is the high level driver of the gigE ethernet ports. *
52**************************************************************************
53**************************************************************************
54*************************************************************************/
55
56/* Definition for configuring driver */
57/* #define UPDATE_STATS_BY_SOFTWARE */
58#undef MV64460_RX_QUEUE_FILL_ON_TASK
59
60
61/* Constants */
62#define MAGIC_ETH_RUNNING 8031971
63#define MV64460_INTERNAL_SRAM_SIZE _256K
64#define EXTRA_BYTES 32
65#define WRAP ETH_HLEN + 2 + 4 + 16
66#define BUFFER_MTU dev->mtu + WRAP
67#define INT_CAUSE_UNMASK_ALL 0x0007ffff
68#define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff
69#ifdef MV64460_RX_FILL_ON_TASK
70#define INT_CAUSE_MASK_ALL 0x00000000
71#define INT_CAUSE_CHECK_BITS INT_CAUSE_UNMASK_ALL
72#define INT_CAUSE_CHECK_BITS_EXT INT_CAUSE_UNMASK_ALL_EXT
73#endif
74
75/* Read/Write to/from MV64460 internal registers */
76#define MV_REG_READ(offset) my_le32_to_cpu(* (volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset))
77#define MV_REG_WRITE(offset,data) *(volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset) = my_cpu_to_le32 (data)
78#define MV_SET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) |= ((unsigned int)my_cpu_to_le32(bits)))
79#define MV_RESET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) &= ~((unsigned int)my_cpu_to_le32(bits)))
80
81/* Static function declarations */
82static int mv64460_eth_real_open (struct eth_device *eth);
83static int mv64460_eth_real_stop (struct eth_device *eth);
84static struct net_device_stats *mv64460_eth_get_stats (struct eth_device
85 *dev);
86static void eth_port_init_mac_tables (ETH_PORT eth_port_num);
87static void mv64460_eth_update_stat (struct eth_device *dev);
88bool db64460_eth_start (struct eth_device *eth);
89unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
90 unsigned int mib_offset);
91int mv64460_eth_receive (struct eth_device *dev);
92
93int mv64460_eth_xmit (struct eth_device *, volatile void *packet, int length);
94
95#ifndef UPDATE_STATS_BY_SOFTWARE
96static void mv64460_eth_print_stat (struct eth_device *dev);
97#endif
98/* Processes a received packet */
99extern void NetReceive (volatile uchar *, int);
100
101extern unsigned int INTERNAL_REG_BASE_ADDR;
102
103/*************************************************
104 *Helper functions - used inside the driver only *
105 *************************************************/
106#ifdef DEBUG_MV_ETH
107void print_globals (struct eth_device *dev)
108{
109 printf ("Ethernet PRINT_Globals-Debug function\n");
110 printf ("Base Address for ETH_PORT_INFO: %08x\n",
111 (unsigned int) dev->priv);
112 printf ("Base Address for mv64460_eth_priv: %08x\n",
113 (unsigned int) &(((ETH_PORT_INFO *) dev->priv)->
114 port_private));
115
116 printf ("GT Internal Base Address: %08x\n",
117 INTERNAL_REG_BASE_ADDR);
118 printf ("Base Address for TX-DESCs: %08x Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64460_TX_QUEUE_SIZE);
119 printf ("Base Address for RX-DESCs: %08x Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64460_RX_QUEUE_SIZE);
120 printf ("Base Address for RX-Buffer: %08x allocated Bytes %d\n",
121 (unsigned int) ((ETH_PORT_INFO *) dev->priv)->
122 p_rx_buffer_base[0],
123 (MV64460_RX_QUEUE_SIZE * MV64460_RX_BUFFER_SIZE) + 32);
124 printf ("Base Address for TX-Buffer: %08x allocated Bytes %d\n",
125 (unsigned int) ((ETH_PORT_INFO *) dev->priv)->
126 p_tx_buffer_base[0],
127 (MV64460_TX_QUEUE_SIZE * MV64460_TX_BUFFER_SIZE) + 32);
128}
129#endif
130
131#define my_cpu_to_le32(x) my_le32_to_cpu((x))
132
133unsigned long my_le32_to_cpu (unsigned long x)
134{
135 return (((x & 0x000000ffU) << 24) |
136 ((x & 0x0000ff00U) << 8) |
137 ((x & 0x00ff0000U) >> 8) | ((x & 0xff000000U) >> 24));
138}
139
140
141/**********************************************************************
142 * mv64460_eth_print_phy_status
143 *
144 * Prints gigabit ethenret phy status
145 *
146 * Input : pointer to ethernet interface network device structure
147 * Output : N/A
148 **********************************************************************/
149
150static void mv64460_eth_print_phy_status (struct eth_device *dev)
151{
152 struct mv64460_eth_priv *port_private;
153 unsigned int port_num;
154 ETH_PORT_INFO *ethernet_private = (ETH_PORT_INFO *) dev->priv;
155 unsigned int port_status, phy_reg_data;
156
157 port_private =
158 (struct mv64460_eth_priv *) ethernet_private->port_private;
159 port_num = port_private->port_num;
160
161 /* Check Link status on phy */
162 eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
163 if (!(phy_reg_data & 0x20)) {
164 printf ("Ethernet port changed link status to DOWN\n");
165 } else {
166 port_status =
167 MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num));
168 printf ("Ethernet status port %d: Link up", port_num);
169 printf (", %s",
170 (port_status & BIT2) ? "Full Duplex" : "Half Duplex");
171 if (port_status & BIT4)
172 printf (", Speed 1 Gbps");
173 else
174 printf (", %s",
175 (port_status & BIT5) ? "Speed 100 Mbps" :
176 "Speed 10 Mbps");
177 printf ("\n");
178 }
179}
180
181/**********************************************************************
182 * u-boot entry functions for mv64460_eth
183 *
184 **********************************************************************/
185int db64460_eth_probe (struct eth_device *dev)
186{
187 return ((int) db64460_eth_start (dev));
188}
189
190int db64460_eth_poll (struct eth_device *dev)
191{
192 return mv64460_eth_receive (dev);
193}
194
195int db64460_eth_transmit (struct eth_device *dev, volatile void *packet,
196 int length)
197{
198 mv64460_eth_xmit (dev, packet, length);
199 return 0;
200}
201
202void db64460_eth_disable (struct eth_device *dev)
203{
204 mv64460_eth_stop (dev);
205}
206
207
208void mv6446x_eth_initialize (bd_t * bis)
209{
210 struct eth_device *dev;
211 ETH_PORT_INFO *ethernet_private;
212 struct mv64460_eth_priv *port_private;
213 int devnum, x, temp;
214 char *s, *e, buf[64];
215
216 for (devnum = 0; devnum < MV_ETH_DEVS; devnum++) {
217 dev = calloc (sizeof (*dev), 1);
218 if (!dev) {
219 printf ("%s: mv_enet%d allocation failure, %s\n",
220 __FUNCTION__, devnum, "eth_device structure");
221 return;
222 }
223
224 /* must be less than NAMESIZE (16) */
225 sprintf (dev->name, "mv_enet%d", devnum);
226
227#ifdef DEBUG
228 printf ("Initializing %s\n", dev->name);
229#endif
230
231 /* Extract the MAC address from the environment */
232 switch (devnum) {
233 case 0:
234 s = "ethaddr";
235 break;
236
237 case 1:
238 s = "eth1addr";
239 break;
240
241 case 2:
242 s = "eth2addr";
243 break;
244
245 default: /* this should never happen */
246 printf ("%s: Invalid device number %d\n",
247 __FUNCTION__, devnum);
248 return;
249 }
250
251 temp = getenv_r (s, buf, sizeof (buf));
252 s = (temp > 0) ? buf : NULL;
253
254#ifdef DEBUG
255 printf ("Setting MAC %d to %s\n", devnum, s);
256#endif
257 for (x = 0; x < 6; ++x) {
258 dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
259 if (s)
260 s = (*e) ? e + 1 : e;
261 }
262 /* ronen - set the MAC addr in the HW */
263 eth_port_uc_addr_set (devnum, dev->enetaddr, 0);
264
265 dev->init = (void *) db64460_eth_probe;
266 dev->halt = (void *) ethernet_phy_reset;
267 dev->send = (void *) db64460_eth_transmit;
268 dev->recv = (void *) db64460_eth_poll;
269
Wolfgang Denk77ddac92005-10-13 16:45:02 +0200270 ethernet_private = calloc (sizeof (*ethernet_private), 1);
Wolfgang Denkf013dac2005-12-04 00:40:34 +0100271 dev->priv = (void *)ethernet_private;
wdenk3a473b22004-01-03 00:43:19 +0000272 if (!ethernet_private) {
273 printf ("%s: %s allocation failure, %s\n",
274 __FUNCTION__, dev->name,
275 "Private Device Structure");
276 free (dev);
277 return;
278 }
279 /* start with an zeroed ETH_PORT_INFO */
280 memset (ethernet_private, 0, sizeof (ETH_PORT_INFO));
281 memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
282
283 /* set pointer to memory for stats data structure etc... */
Wolfgang Denk77ddac92005-10-13 16:45:02 +0200284 port_private = calloc (sizeof (*ethernet_private), 1);
Wolfgang Denkf013dac2005-12-04 00:40:34 +0100285 ethernet_private->port_private = (void *)port_private;
wdenk3a473b22004-01-03 00:43:19 +0000286 if (!port_private) {
287 printf ("%s: %s allocation failure, %s\n",
288 __FUNCTION__, dev->name,
289 "Port Private Device Structure");
290
291 free (ethernet_private);
292 free (dev);
293 return;
294 }
295
296 port_private->stats =
297 calloc (sizeof (struct net_device_stats), 1);
298 if (!port_private->stats) {
299 printf ("%s: %s allocation failure, %s\n",
300 __FUNCTION__, dev->name,
301 "Net stat Structure");
302
303 free (port_private);
304 free (ethernet_private);
305 free (dev);
306 return;
307 }
308 memset (ethernet_private->port_private, 0,
309 sizeof (struct mv64460_eth_priv));
310 switch (devnum) {
311 case 0:
312 ethernet_private->port_num = ETH_0;
313 break;
314 case 1:
315 ethernet_private->port_num = ETH_1;
316 break;
317 case 2:
318 ethernet_private->port_num = ETH_2;
319 break;
320 default:
321 printf ("Invalid device number %d\n", devnum);
322 break;
323 };
324
325 port_private->port_num = devnum;
326 /*
327 * Read MIB counter on the GT in order to reset them,
328 * then zero all the stats fields in memory
329 */
330 mv64460_eth_update_stat (dev);
331 memset (port_private->stats, 0,
332 sizeof (struct net_device_stats));
333 /* Extract the MAC address from the environment */
334 switch (devnum) {
335 case 0:
336 s = "ethaddr";
337 break;
338
339 case 1:
340 s = "eth1addr";
341 break;
342
343 case 2:
344 s = "eth2addr";
345 break;
346
347 default: /* this should never happen */
348 printf ("%s: Invalid device number %d\n",
349 __FUNCTION__, devnum);
350 return;
351 }
352
353 temp = getenv_r (s, buf, sizeof (buf));
354 s = (temp > 0) ? buf : NULL;
355
356#ifdef DEBUG
357 printf ("Setting MAC %d to %s\n", devnum, s);
358#endif
359 for (x = 0; x < 6; ++x) {
360 dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
361 if (s)
362 s = (*e) ? e + 1 : e;
363 }
364
365 DP (printf ("Allocating descriptor and buffer rings\n"));
366
367 ethernet_private->p_rx_desc_area_base[0] =
368 (ETH_RX_DESC *) memalign (16,
369 RX_DESC_ALIGNED_SIZE *
370 MV64460_RX_QUEUE_SIZE + 1);
371 ethernet_private->p_tx_desc_area_base[0] =
372 (ETH_TX_DESC *) memalign (16,
373 TX_DESC_ALIGNED_SIZE *
374 MV64460_TX_QUEUE_SIZE + 1);
375
376 ethernet_private->p_rx_buffer_base[0] =
377 (char *) memalign (16,
378 MV64460_RX_QUEUE_SIZE *
379 MV64460_TX_BUFFER_SIZE + 1);
380 ethernet_private->p_tx_buffer_base[0] =
381 (char *) memalign (16,
382 MV64460_RX_QUEUE_SIZE *
383 MV64460_TX_BUFFER_SIZE + 1);
384
385#ifdef DEBUG_MV_ETH
386 /* DEBUG OUTPUT prints adresses of globals */
387 print_globals (dev);
388#endif
389 eth_register (dev);
390
391 }
392 DP (printf ("%s: exit\n", __FUNCTION__));
393
394}
395
396/**********************************************************************
397 * mv64460_eth_open
398 *
399 * This function is called when openning the network device. The function
400 * should initialize all the hardware, initialize cyclic Rx/Tx
401 * descriptors chain and buffers and allocate an IRQ to the network
402 * device.
403 *
404 * Input : a pointer to the network device structure
405 * / / ronen - changed the output to match net/eth.c needs
406 * Output : nonzero of success , zero if fails.
407 * under construction
408 **********************************************************************/
409
410int mv64460_eth_open (struct eth_device *dev)
411{
412 return (mv64460_eth_real_open (dev));
413}
414
415/* Helper function for mv64460_eth_open */
416static int mv64460_eth_real_open (struct eth_device *dev)
417{
418
419 unsigned int queue;
420 ETH_PORT_INFO *ethernet_private;
421 struct mv64460_eth_priv *port_private;
422 unsigned int port_num;
423 u32 port_status, phy_reg_data;
424
425 ethernet_private = (ETH_PORT_INFO *) dev->priv;
426 /* ronen - when we update the MAC env params we only update dev->enetaddr
427 see ./net/eth.c eth_set_enetaddr() */
428 memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
429
430 port_private =
431 (struct mv64460_eth_priv *) ethernet_private->port_private;
432 port_num = port_private->port_num;
433
434 /* Stop RX Queues */
435 MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
436 0x0000ff00);
437
438 /* Clear the ethernet port interrupts */
439 MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
440 MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
441
442 /* Unmask RX buffer and TX end interrupt */
443 MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num),
444 INT_CAUSE_UNMASK_ALL);
445
446 /* Unmask phy and link status changes interrupts */
447 MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num),
448 INT_CAUSE_UNMASK_ALL_EXT);
449
450 /* Set phy address of the port */
451 ethernet_private->port_phy_addr = 0x8 + port_num;
452
453 /* Activate the DMA channels etc */
454 eth_port_init (ethernet_private);
455
456
457 /* "Allocate" setup TX rings */
458
459 for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) {
460 unsigned int size;
461
462 port_private->tx_ring_size[queue] = MV64460_TX_QUEUE_SIZE;
463 size = (port_private->tx_ring_size[queue] * TX_DESC_ALIGNED_SIZE); /*size = no of DESCs times DESC-size */
464 ethernet_private->tx_desc_area_size[queue] = size;
465
466 /* first clear desc area completely */
467 memset ((void *) ethernet_private->p_tx_desc_area_base[queue],
468 0, ethernet_private->tx_desc_area_size[queue]);
469
470 /* initialize tx desc ring with low level driver */
471 if (ether_init_tx_desc_ring
472 (ethernet_private, ETH_Q0,
473 port_private->tx_ring_size[queue],
474 MV64460_TX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
475 (unsigned int) ethernet_private->
476 p_tx_desc_area_base[queue],
477 (unsigned int) ethernet_private->
478 p_tx_buffer_base[queue]) == false)
479 printf ("### Error initializing TX Ring\n");
480 }
481
482 /* "Allocate" setup RX rings */
483 for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) {
484 unsigned int size;
485
486 /* Meantime RX Ring are fixed - but must be configurable by user */
487 port_private->rx_ring_size[queue] = MV64460_RX_QUEUE_SIZE;
488 size = (port_private->rx_ring_size[queue] *
489 RX_DESC_ALIGNED_SIZE);
490 ethernet_private->rx_desc_area_size[queue] = size;
491
492 /* first clear desc area completely */
493 memset ((void *) ethernet_private->p_rx_desc_area_base[queue],
494 0, ethernet_private->rx_desc_area_size[queue]);
495 if ((ether_init_rx_desc_ring
496 (ethernet_private, ETH_Q0,
497 port_private->rx_ring_size[queue],
498 MV64460_RX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
499 (unsigned int) ethernet_private->
500 p_rx_desc_area_base[queue],
501 (unsigned int) ethernet_private->
502 p_rx_buffer_base[queue])) == false)
503 printf ("### Error initializing RX Ring\n");
504 }
505
506 eth_port_start (ethernet_private);
507
508 /* Set maximum receive buffer to 9700 bytes */
509 MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num),
510 (0x5 << 17) |
511 (MV_REG_READ
512 (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num))
513 & 0xfff1ffff));
514
515 /*
516 * Set ethernet MTU for leaky bucket mechanism to 0 - this will
517 * disable the leaky bucket mechanism .
518 */
519
520 MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (port_num), 0);
521 port_status = MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num));
522
523 /* Check Link status on phy */
524 eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
525 if (!(phy_reg_data & 0x20)) {
526 /* Reset PHY */
527 if ((ethernet_phy_reset (port_num)) != true) {
528 printf ("$$ Warnning: No link on port %d \n",
529 port_num);
530 return 0;
531 } else {
532 eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
533 if (!(phy_reg_data & 0x20)) {
534 printf ("### Error: Phy is not active\n");
535 return 0;
536 }
537 }
538 } else {
539 mv64460_eth_print_phy_status (dev);
540 }
541 port_private->eth_running = MAGIC_ETH_RUNNING;
542 return 1;
543}
544
545
546static int mv64460_eth_free_tx_rings (struct eth_device *dev)
547{
548 unsigned int queue;
549 ETH_PORT_INFO *ethernet_private;
550 struct mv64460_eth_priv *port_private;
551 unsigned int port_num;
552 volatile ETH_TX_DESC *p_tx_curr_desc;
553
554 ethernet_private = (ETH_PORT_INFO *) dev->priv;
555 port_private =
556 (struct mv64460_eth_priv *) ethernet_private->port_private;
557 port_num = port_private->port_num;
558
559 /* Stop Tx Queues */
560 MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG (port_num),
561 0x0000ff00);
562
563 /* Free TX rings */
564 DP (printf ("Clearing previously allocated TX queues... "));
565 for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) {
566 /* Free on TX rings */
567 for (p_tx_curr_desc =
568 ethernet_private->p_tx_desc_area_base[queue];
569 ((unsigned int) p_tx_curr_desc <= (unsigned int)
570 ethernet_private->p_tx_desc_area_base[queue] +
571 ethernet_private->tx_desc_area_size[queue]);
572 p_tx_curr_desc =
573 (ETH_TX_DESC *) ((unsigned int) p_tx_curr_desc +
574 TX_DESC_ALIGNED_SIZE)) {
575 /* this is inside for loop */
576 if (p_tx_curr_desc->return_info != 0) {
577 p_tx_curr_desc->return_info = 0;
578 DP (printf ("freed\n"));
579 }
580 }
581 DP (printf ("Done\n"));
582 }
583 return 0;
584}
585
586static int mv64460_eth_free_rx_rings (struct eth_device *dev)
587{
588 unsigned int queue;
589 ETH_PORT_INFO *ethernet_private;
590 struct mv64460_eth_priv *port_private;
591 unsigned int port_num;
592 volatile ETH_RX_DESC *p_rx_curr_desc;
593
594 ethernet_private = (ETH_PORT_INFO *) dev->priv;
595 port_private =
596 (struct mv64460_eth_priv *) ethernet_private->port_private;
597 port_num = port_private->port_num;
598
599
600 /* Stop RX Queues */
601 MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
602 0x0000ff00);
603
604 /* Free RX rings */
605 DP (printf ("Clearing previously allocated RX queues... "));
606 for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) {
607 /* Free preallocated skb's on RX rings */
608 for (p_rx_curr_desc =
609 ethernet_private->p_rx_desc_area_base[queue];
610 (((unsigned int) p_rx_curr_desc <
611 ((unsigned int) ethernet_private->
612 p_rx_desc_area_base[queue] +
613 ethernet_private->rx_desc_area_size[queue])));
614 p_rx_curr_desc =
615 (ETH_RX_DESC *) ((unsigned int) p_rx_curr_desc +
616 RX_DESC_ALIGNED_SIZE)) {
617 if (p_rx_curr_desc->return_info != 0) {
618 p_rx_curr_desc->return_info = 0;
619 DP (printf ("freed\n"));
620 }
621 }
622 DP (printf ("Done\n"));
623 }
624 return 0;
625}
626
627/**********************************************************************
628 * mv64460_eth_stop
629 *
630 * This function is used when closing the network device.
631 * It updates the hardware,
632 * release all memory that holds buffers and descriptors and release the IRQ.
633 * Input : a pointer to the device structure
634 * Output : zero if success , nonzero if fails
635 *********************************************************************/
636
637int mv64460_eth_stop (struct eth_device *dev)
638{
639 ETH_PORT_INFO *ethernet_private;
640 struct mv64460_eth_priv *port_private;
641 unsigned int port_num;
642
643 ethernet_private = (ETH_PORT_INFO *) dev->priv;
644 port_private =
645 (struct mv64460_eth_priv *) ethernet_private->port_private;
646 port_num = port_private->port_num;
647
648 /* Disable all gigE address decoder */
649 MV_REG_WRITE (MV64460_ETH_BASE_ADDR_ENABLE_REG, 0x3f);
650 DP (printf ("%s Ethernet stop called ... \n", __FUNCTION__));
651 mv64460_eth_real_stop (dev);
652
653 return 0;
654};
655
656/* Helper function for mv64460_eth_stop */
657
658static int mv64460_eth_real_stop (struct eth_device *dev)
659{
660 ETH_PORT_INFO *ethernet_private;
661 struct mv64460_eth_priv *port_private;
662 unsigned int port_num;
663
664 ethernet_private = (ETH_PORT_INFO *) dev->priv;
665 port_private =
666 (struct mv64460_eth_priv *) ethernet_private->port_private;
667 port_num = port_private->port_num;
668
669
670 mv64460_eth_free_tx_rings (dev);
671 mv64460_eth_free_rx_rings (dev);
672
673 eth_port_reset (ethernet_private->port_num);
674 /* Disable ethernet port interrupts */
675 MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
676 MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
677 /* Mask RX buffer and TX end interrupt */
678 MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num), 0);
679 /* Mask phy and link status changes interrupts */
680 MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), 0);
681 MV_RESET_REG_BITS (MV64460_CPU_INTERRUPT0_MASK_HIGH,
682 BIT0 << port_num);
683 /* Print Network statistics */
684#ifndef UPDATE_STATS_BY_SOFTWARE
685 /*
686 * Print statistics (only if ethernet is running),
687 * then zero all the stats fields in memory
688 */
689 if (port_private->eth_running == MAGIC_ETH_RUNNING) {
690 port_private->eth_running = 0;
691 mv64460_eth_print_stat (dev);
692 }
693 memset (port_private->stats, 0, sizeof (struct net_device_stats));
694#endif
695 DP (printf ("\nEthernet stopped ... \n"));
696 return 0;
697}
698
699
700/**********************************************************************
701 * mv64460_eth_start_xmit
702 *
703 * This function is queues a packet in the Tx descriptor for
704 * required port.
705 *
706 * Input : skb - a pointer to socket buffer
707 * dev - a pointer to the required port
708 *
709 * Output : zero upon success
710 **********************************************************************/
711
712int mv64460_eth_xmit (struct eth_device *dev, volatile void *dataPtr,
713 int dataSize)
714{
715 ETH_PORT_INFO *ethernet_private;
716 struct mv64460_eth_priv *port_private;
717 unsigned int port_num;
718 PKT_INFO pkt_info;
719 ETH_FUNC_RET_STATUS status;
720 struct net_device_stats *stats;
721 ETH_FUNC_RET_STATUS release_result;
722
723 ethernet_private = (ETH_PORT_INFO *) dev->priv;
724 port_private =
725 (struct mv64460_eth_priv *) ethernet_private->port_private;
726 port_num = port_private->port_num;
727
728 stats = port_private->stats;
729
730 /* Update packet info data structure */
731 pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */
732 pkt_info.byte_cnt = dataSize;
733 pkt_info.buf_ptr = (unsigned int) dataPtr;
Wolfgang Denkd87080b2006-03-31 18:32:53 +0200734 pkt_info.return_info = 0;
wdenk3a473b22004-01-03 00:43:19 +0000735
736 status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
737 if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
738 printf ("Error on transmitting packet ..");
739 if (status == ETH_QUEUE_FULL)
740 printf ("ETH Queue is full. \n");
741 if (status == ETH_QUEUE_LAST_RESOURCE)
742 printf ("ETH Queue: using last available resource. \n");
743 goto error;
744 }
745
746 /* Update statistics and start of transmittion time */
747 stats->tx_bytes += dataSize;
748 stats->tx_packets++;
749
750 /* Check if packet(s) is(are) transmitted correctly (release everything) */
751 do {
752 release_result =
753 eth_tx_return_desc (ethernet_private, ETH_Q0,
754 &pkt_info);
755 switch (release_result) {
756 case ETH_OK:
757 DP (printf ("descriptor released\n"));
758 if (pkt_info.cmd_sts & BIT0) {
759 printf ("Error in TX\n");
760 stats->tx_errors++;
761
762 }
763 break;
764 case ETH_RETRY:
765 DP (printf ("transmission still in process\n"));
766 break;
767
768 case ETH_ERROR:
769 printf ("routine can not access Tx desc ring\n");
770 break;
771
772 case ETH_END_OF_JOB:
773 DP (printf ("the routine has nothing to release\n"));
774 break;
775 default: /* should not happen */
776 break;
777 }
778 } while (release_result == ETH_OK);
779
780
781 return 0; /* success */
782 error:
783 return 1; /* Failed - higher layers will free the skb */
784}
785
786/**********************************************************************
787 * mv64460_eth_receive
788 *
789 * This function is forward packets that are received from the port's
790 * queues toward kernel core or FastRoute them to another interface.
791 *
792 * Input : dev - a pointer to the required interface
793 * max - maximum number to receive (0 means unlimted)
794 *
795 * Output : number of served packets
796 **********************************************************************/
797
798int mv64460_eth_receive (struct eth_device *dev)
799{
800 ETH_PORT_INFO *ethernet_private;
801 struct mv64460_eth_priv *port_private;
802 unsigned int port_num;
803 PKT_INFO pkt_info;
804 struct net_device_stats *stats;
805
806
807 ethernet_private = (ETH_PORT_INFO *) dev->priv;
808 port_private =
809 (struct mv64460_eth_priv *) ethernet_private->port_private;
810 port_num = port_private->port_num;
811 stats = port_private->stats;
812
813 while ((eth_port_receive (ethernet_private, ETH_Q0, &pkt_info) ==
814 ETH_OK)) {
815
816#ifdef DEBUG_MV_ETH
817 if (pkt_info.byte_cnt != 0) {
818 printf ("%s: Received %d byte Packet @ 0x%x\n",
819 __FUNCTION__, pkt_info.byte_cnt,
820 pkt_info.buf_ptr);
821 }
822#endif
823 /* Update statistics. Note byte count includes 4 byte CRC count */
824 stats->rx_packets++;
825 stats->rx_bytes += pkt_info.byte_cnt;
826
827 /*
828 * In case received a packet without first / last bits on OR the error
829 * summary bit is on, the packets needs to be dropeed.
830 */
831 if (((pkt_info.
832 cmd_sts & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) !=
833 (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC))
834 || (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) {
835 stats->rx_dropped++;
836
837 printf ("Received packet spread on multiple descriptors\n");
838
839 /* Is this caused by an error ? */
840 if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY) {
841 stats->rx_errors++;
842 }
843
844 /* free these descriptors again without forwarding them to the higher layers */
845 pkt_info.buf_ptr &= ~0x7; /* realign buffer again */
846 pkt_info.byte_cnt = 0x0000; /* Reset Byte count */
847
848 if (eth_rx_return_buff
849 (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
850 printf ("Error while returning the RX Desc to Ring\n");
851 } else {
852 DP (printf ("RX Desc returned to Ring\n"));
853 }
854 /* /free these descriptors again */
855 } else {
856
857/* !!! call higher layer processing */
858#ifdef DEBUG_MV_ETH
859 printf ("\nNow send it to upper layer protocols (NetReceive) ...\n");
860#endif
861 /* let the upper layer handle the packet */
862 NetReceive ((uchar *) pkt_info.buf_ptr,
863 (int) pkt_info.byte_cnt);
864
865/* **************************************************************** */
866/* free descriptor */
867 pkt_info.buf_ptr &= ~0x7; /* realign buffer again */
868 pkt_info.byte_cnt = 0x0000; /* Reset Byte count */
869 DP (printf
870 ("RX: pkt_info.buf_ptr = %x\n",
871 pkt_info.buf_ptr));
872 if (eth_rx_return_buff
873 (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
874 printf ("Error while returning the RX Desc to Ring\n");
875 } else {
876 DP (printf ("RX Desc returned to Ring\n"));
877 }
878
879/* **************************************************************** */
880
881 }
882 }
883 mv64460_eth_get_stats (dev); /* update statistics */
884 return 1;
885}
886
887/**********************************************************************
888 * mv64460_eth_get_stats
889 *
890 * Returns a pointer to the interface statistics.
891 *
892 * Input : dev - a pointer to the required interface
893 *
894 * Output : a pointer to the interface's statistics
895 **********************************************************************/
896
897static struct net_device_stats *mv64460_eth_get_stats (struct eth_device *dev)
898{
899 ETH_PORT_INFO *ethernet_private;
900 struct mv64460_eth_priv *port_private;
901 unsigned int port_num;
902
903 ethernet_private = (ETH_PORT_INFO *) dev->priv;
904 port_private =
905 (struct mv64460_eth_priv *) ethernet_private->port_private;
906 port_num = port_private->port_num;
907
908 mv64460_eth_update_stat (dev);
909
910 return port_private->stats;
911}
912
913
914/**********************************************************************
915 * mv64460_eth_update_stat
916 *
917 * Update the statistics structure in the private data structure
918 *
919 * Input : pointer to ethernet interface network device structure
920 * Output : N/A
921 **********************************************************************/
922
923static void mv64460_eth_update_stat (struct eth_device *dev)
924{
925 ETH_PORT_INFO *ethernet_private;
926 struct mv64460_eth_priv *port_private;
927 struct net_device_stats *stats;
928 unsigned int port_num;
929 volatile unsigned int dummy;
930
931 ethernet_private = (ETH_PORT_INFO *) dev->priv;
932 port_private =
933 (struct mv64460_eth_priv *) ethernet_private->port_private;
934 port_num = port_private->port_num;
935 stats = port_private->stats;
936
937 /* These are false updates */
938 stats->rx_packets += (unsigned long)
939 eth_read_mib_counter (ethernet_private->port_num,
940 ETH_MIB_GOOD_FRAMES_RECEIVED);
941 stats->tx_packets += (unsigned long)
942 eth_read_mib_counter (ethernet_private->port_num,
943 ETH_MIB_GOOD_FRAMES_SENT);
944 stats->rx_bytes += (unsigned long)
945 eth_read_mib_counter (ethernet_private->port_num,
946 ETH_MIB_GOOD_OCTETS_RECEIVED_LOW);
947 /*
948 * Ideally this should be as follows -
949 *
950 * stats->rx_bytes += stats->rx_bytes +
951 * ((unsigned long) ethReadMibCounter (ethernet_private->port_num ,
952 * ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32);
953 *
954 * But the unsigned long in PowerPC and MIPS are 32bit. So the next read
955 * is just a dummy read for proper work of the GigE port
956 */
957 dummy = eth_read_mib_counter (ethernet_private->port_num,
958 ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH);
959 stats->tx_bytes += (unsigned long)
960 eth_read_mib_counter (ethernet_private->port_num,
961 ETH_MIB_GOOD_OCTETS_SENT_LOW);
962 dummy = eth_read_mib_counter (ethernet_private->port_num,
963 ETH_MIB_GOOD_OCTETS_SENT_HIGH);
964 stats->rx_errors += (unsigned long)
965 eth_read_mib_counter (ethernet_private->port_num,
966 ETH_MIB_MAC_RECEIVE_ERROR);
967
968 /* Rx dropped is for received packet with CRC error */
969 stats->rx_dropped +=
970 (unsigned long) eth_read_mib_counter (ethernet_private->
971 port_num,
972 ETH_MIB_BAD_CRC_EVENT);
973 stats->multicast += (unsigned long)
974 eth_read_mib_counter (ethernet_private->port_num,
975 ETH_MIB_MULTICAST_FRAMES_RECEIVED);
976 stats->collisions +=
977 (unsigned long) eth_read_mib_counter (ethernet_private->
978 port_num,
979 ETH_MIB_COLLISION) +
980 (unsigned long) eth_read_mib_counter (ethernet_private->
981 port_num,
982 ETH_MIB_LATE_COLLISION);
983 /* detailed rx errors */
984 stats->rx_length_errors +=
985 (unsigned long) eth_read_mib_counter (ethernet_private->
986 port_num,
987 ETH_MIB_UNDERSIZE_RECEIVED)
988 +
989 (unsigned long) eth_read_mib_counter (ethernet_private->
990 port_num,
991 ETH_MIB_OVERSIZE_RECEIVED);
992 /* detailed tx errors */
993}
994
995#ifndef UPDATE_STATS_BY_SOFTWARE
996/**********************************************************************
997 * mv64460_eth_print_stat
998 *
999 * Update the statistics structure in the private data structure
1000 *
1001 * Input : pointer to ethernet interface network device structure
1002 * Output : N/A
1003 **********************************************************************/
1004
1005static void mv64460_eth_print_stat (struct eth_device *dev)
1006{
1007 ETH_PORT_INFO *ethernet_private;
1008 struct mv64460_eth_priv *port_private;
1009 struct net_device_stats *stats;
1010 unsigned int port_num;
1011
1012 ethernet_private = (ETH_PORT_INFO *) dev->priv;
1013 port_private =
1014 (struct mv64460_eth_priv *) ethernet_private->port_private;
1015 port_num = port_private->port_num;
1016 stats = port_private->stats;
1017
1018 /* These are false updates */
1019 printf ("\n### Network statistics: ###\n");
1020 printf ("--------------------------\n");
1021 printf (" Packets received: %ld\n", stats->rx_packets);
1022 printf (" Packets send: %ld\n", stats->tx_packets);
1023 printf (" Received bytes: %ld\n", stats->rx_bytes);
1024 printf (" Send bytes: %ld\n", stats->tx_bytes);
1025 if (stats->rx_errors != 0)
1026 printf (" Rx Errors: %ld\n",
1027 stats->rx_errors);
1028 if (stats->rx_dropped != 0)
1029 printf (" Rx dropped (CRC Errors): %ld\n",
1030 stats->rx_dropped);
1031 if (stats->multicast != 0)
1032 printf (" Rx mulicast frames: %ld\n",
1033 stats->multicast);
1034 if (stats->collisions != 0)
1035 printf (" No. of collisions: %ld\n",
1036 stats->collisions);
1037 if (stats->rx_length_errors != 0)
1038 printf (" Rx length errors: %ld\n",
1039 stats->rx_length_errors);
1040}
1041#endif
1042
1043/**************************************************************************
1044 *network_start - Network Kick Off Routine UBoot
1045 *Inputs :
1046 *Outputs :
1047 **************************************************************************/
1048
1049bool db64460_eth_start (struct eth_device *dev)
1050{
1051 return (mv64460_eth_open (dev)); /* calls real open */
1052}
1053
1054/*************************************************************************
1055**************************************************************************
1056**************************************************************************
1057* The second part is the low level driver of the gigE ethernet ports. *
1058**************************************************************************
1059**************************************************************************
1060*************************************************************************/
1061/*
1062 * based on Linux code
1063 * arch/ppc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports
1064 * Copyright (C) 2002 rabeeh@galileo.co.il
1065
1066 * This program is free software; you can redistribute it and/or
1067 * modify it under the terms of the GNU General Public License
1068 * as published by the Free Software Foundation; either version 2
1069 * of the License, or (at your option) any later version.
1070
1071 * This program is distributed in the hope that it will be useful,
1072 * but WITHOUT ANY WARRANTY; without even the implied warranty of
1073 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
1074 * GNU General Public License for more details.
1075
1076 * You should have received a copy of the GNU General Public License
1077 * along with this program; if not, write to the Free Software
1078 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
1079 *
1080 */
1081
1082/********************************************************************************
1083 * Marvell's Gigabit Ethernet controller low level driver
1084 *
1085 * DESCRIPTION:
1086 * This file introduce low level API to Marvell's Gigabit Ethernet
1087 * controller. This Gigabit Ethernet Controller driver API controls
1088 * 1) Operations (i.e. port init, start, reset etc').
1089 * 2) Data flow (i.e. port send, receive etc').
1090 * Each Gigabit Ethernet port is controlled via ETH_PORT_INFO
1091 * struct.
1092 * This struct includes user configuration information as well as
1093 * driver internal data needed for its operations.
1094 *
1095 * Supported Features:
1096 * - This low level driver is OS independent. Allocating memory for
1097 * the descriptor rings and buffers are not within the scope of
1098 * this driver.
1099 * - The user is free from Rx/Tx queue managing.
1100 * - This low level driver introduce functionality API that enable
1101 * the to operate Marvell's Gigabit Ethernet Controller in a
1102 * convenient way.
1103 * - Simple Gigabit Ethernet port operation API.
1104 * - Simple Gigabit Ethernet port data flow API.
1105 * - Data flow and operation API support per queue functionality.
1106 * - Support cached descriptors for better performance.
1107 * - Enable access to all four DRAM banks and internal SRAM memory
1108 * spaces.
1109 * - PHY access and control API.
1110 * - Port control register configuration API.
1111 * - Full control over Unicast and Multicast MAC configurations.
1112 *
1113 * Operation flow:
1114 *
1115 * Initialization phase
1116 * This phase complete the initialization of the ETH_PORT_INFO
1117 * struct.
1118 * User information regarding port configuration has to be set
1119 * prior to calling the port initialization routine. For example,
1120 * the user has to assign the port_phy_addr field which is board
1121 * depended parameter.
1122 * In this phase any port Tx/Rx activity is halted, MIB counters
1123 * are cleared, PHY address is set according to user parameter and
1124 * access to DRAM and internal SRAM memory spaces.
1125 *
1126 * Driver ring initialization
1127 * Allocating memory for the descriptor rings and buffers is not
1128 * within the scope of this driver. Thus, the user is required to
1129 * allocate memory for the descriptors ring and buffers. Those
1130 * memory parameters are used by the Rx and Tx ring initialization
1131 * routines in order to curve the descriptor linked list in a form
1132 * of a ring.
1133 * Note: Pay special attention to alignment issues when using
1134 * cached descriptors/buffers. In this phase the driver store
1135 * information in the ETH_PORT_INFO struct regarding each queue
1136 * ring.
1137 *
1138 * Driver start
1139 * This phase prepares the Ethernet port for Rx and Tx activity.
1140 * It uses the information stored in the ETH_PORT_INFO struct to
1141 * initialize the various port registers.
1142 *
1143 * Data flow:
1144 * All packet references to/from the driver are done using PKT_INFO
1145 * struct.
1146 * This struct is a unified struct used with Rx and Tx operations.
1147 * This way the user is not required to be familiar with neither
1148 * Tx nor Rx descriptors structures.
1149 * The driver's descriptors rings are management by indexes.
1150 * Those indexes controls the ring resources and used to indicate
1151 * a SW resource error:
1152 * 'current'
1153 * This index points to the current available resource for use. For
1154 * example in Rx process this index will point to the descriptor
1155 * that will be passed to the user upon calling the receive routine.
1156 * In Tx process, this index will point to the descriptor
1157 * that will be assigned with the user packet info and transmitted.
1158 * 'used'
1159 * This index points to the descriptor that need to restore its
1160 * resources. For example in Rx process, using the Rx buffer return
1161 * API will attach the buffer returned in packet info to the
1162 * descriptor pointed by 'used'. In Tx process, using the Tx
1163 * descriptor return will merely return the user packet info with
1164 * the command status of the transmitted buffer pointed by the
1165 * 'used' index. Nevertheless, it is essential to use this routine
1166 * to update the 'used' index.
1167 * 'first'
1168 * This index supports Tx Scatter-Gather. It points to the first
1169 * descriptor of a packet assembled of multiple buffers. For example
1170 * when in middle of Such packet we have a Tx resource error the
1171 * 'curr' index get the value of 'first' to indicate that the ring
1172 * returned to its state before trying to transmit this packet.
1173 *
1174 * Receive operation:
1175 * The eth_port_receive API set the packet information struct,
1176 * passed by the caller, with received information from the
1177 * 'current' SDMA descriptor.
1178 * It is the user responsibility to return this resource back
1179 * to the Rx descriptor ring to enable the reuse of this source.
1180 * Return Rx resource is done using the eth_rx_return_buff API.
1181 *
1182 * Transmit operation:
1183 * The eth_port_send API supports Scatter-Gather which enables to
1184 * send a packet spanned over multiple buffers. This means that
1185 * for each packet info structure given by the user and put into
1186 * the Tx descriptors ring, will be transmitted only if the 'LAST'
1187 * bit will be set in the packet info command status field. This
1188 * API also consider restriction regarding buffer alignments and
1189 * sizes.
1190 * The user must return a Tx resource after ensuring the buffer
1191 * has been transmitted to enable the Tx ring indexes to update.
1192 *
1193 * BOARD LAYOUT
1194 * This device is on-board. No jumper diagram is necessary.
1195 *
1196 * EXTERNAL INTERFACE
1197 *
1198 * Prior to calling the initialization routine eth_port_init() the user
1199 * must set the following fields under ETH_PORT_INFO struct:
1200 * port_num User Ethernet port number.
1201 * port_phy_addr User PHY address of Ethernet port.
1202 * port_mac_addr[6] User defined port MAC address.
1203 * port_config User port configuration value.
1204 * port_config_extend User port config extend value.
1205 * port_sdma_config User port SDMA config value.
1206 * port_serial_control User port serial control value.
1207 * *port_virt_to_phys () User function to cast virtual addr to CPU bus addr.
1208 * *port_private User scratch pad for user specific data structures.
1209 *
1210 * This driver introduce a set of default values:
1211 * PORT_CONFIG_VALUE Default port configuration value
1212 * PORT_CONFIG_EXTEND_VALUE Default port extend configuration value
1213 * PORT_SDMA_CONFIG_VALUE Default sdma control value
1214 * PORT_SERIAL_CONTROL_VALUE Default port serial control value
1215 *
1216 * This driver data flow is done using the PKT_INFO struct which is
1217 * a unified struct for Rx and Tx operations:
1218 * byte_cnt Tx/Rx descriptor buffer byte count.
1219 * l4i_chk CPU provided TCP Checksum. For Tx operation only.
1220 * cmd_sts Tx/Rx descriptor command status.
1221 * buf_ptr Tx/Rx descriptor buffer pointer.
1222 * return_info Tx/Rx user resource return information.
1223 *
1224 *
1225 * EXTERNAL SUPPORT REQUIREMENTS
1226 *
1227 * This driver requires the following external support:
1228 *
1229 * D_CACHE_FLUSH_LINE (address, address offset)
1230 *
1231 * This macro applies assembly code to flush and invalidate cache
1232 * line.
1233 * address - address base.
1234 * address offset - address offset
1235 *
1236 *
1237 * CPU_PIPE_FLUSH
1238 *
1239 * This macro applies assembly code to flush the CPU pipeline.
1240 *
1241 *******************************************************************************/
1242/* includes */
1243
1244/* defines */
1245/* SDMA command macros */
1246#define ETH_ENABLE_TX_QUEUE(tx_queue, eth_port) \
1247 MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), (1 << tx_queue))
1248
1249#define ETH_DISABLE_TX_QUEUE(tx_queue, eth_port) \
1250 MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port),\
1251 (1 << (8 + tx_queue)))
1252
1253#define ETH_ENABLE_RX_QUEUE(rx_queue, eth_port) \
1254MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << rx_queue))
1255
1256#define ETH_DISABLE_RX_QUEUE(rx_queue, eth_port) \
1257MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << (8 + rx_queue)))
1258
1259#define CURR_RFD_GET(p_curr_desc, queue) \
1260 ((p_curr_desc) = p_eth_port_ctrl->p_rx_curr_desc_q[queue])
1261
1262#define CURR_RFD_SET(p_curr_desc, queue) \
1263 (p_eth_port_ctrl->p_rx_curr_desc_q[queue] = (p_curr_desc))
1264
1265#define USED_RFD_GET(p_used_desc, queue) \
1266 ((p_used_desc) = p_eth_port_ctrl->p_rx_used_desc_q[queue])
1267
1268#define USED_RFD_SET(p_used_desc, queue)\
1269(p_eth_port_ctrl->p_rx_used_desc_q[queue] = (p_used_desc))
1270
1271
1272#define CURR_TFD_GET(p_curr_desc, queue) \
1273 ((p_curr_desc) = p_eth_port_ctrl->p_tx_curr_desc_q[queue])
1274
1275#define CURR_TFD_SET(p_curr_desc, queue) \
1276 (p_eth_port_ctrl->p_tx_curr_desc_q[queue] = (p_curr_desc))
1277
1278#define USED_TFD_GET(p_used_desc, queue) \
1279 ((p_used_desc) = p_eth_port_ctrl->p_tx_used_desc_q[queue])
1280
1281#define USED_TFD_SET(p_used_desc, queue) \
1282 (p_eth_port_ctrl->p_tx_used_desc_q[queue] = (p_used_desc))
1283
1284#define FIRST_TFD_GET(p_first_desc, queue) \
1285 ((p_first_desc) = p_eth_port_ctrl->p_tx_first_desc_q[queue])
1286
1287#define FIRST_TFD_SET(p_first_desc, queue) \
1288 (p_eth_port_ctrl->p_tx_first_desc_q[queue] = (p_first_desc))
1289
1290
1291/* Macros that save access to desc in order to find next desc pointer */
1292#define RX_NEXT_DESC_PTR(p_rx_desc, queue) (ETH_RX_DESC*)(((((unsigned int)p_rx_desc - (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + RX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->rx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue])
1293
1294#define TX_NEXT_DESC_PTR(p_tx_desc, queue) (ETH_TX_DESC*)(((((unsigned int)p_tx_desc - (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + TX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->tx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue])
1295
1296#define LINK_UP_TIMEOUT 100000
1297#define PHY_BUSY_TIMEOUT 10000000
1298
1299/* locals */
1300
1301/* PHY routines */
1302static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr);
1303static int ethernet_phy_get (ETH_PORT eth_port_num);
1304
1305/* Ethernet Port routines */
1306static void eth_set_access_control (ETH_PORT eth_port_num,
1307 ETH_WIN_PARAM * param);
1308static bool eth_port_uc_addr (ETH_PORT eth_port_num, unsigned char uc_nibble,
1309 ETH_QUEUE queue, int option);
1310#if 0 /* FIXME */
1311static bool eth_port_smc_addr (ETH_PORT eth_port_num,
1312 unsigned char mc_byte,
1313 ETH_QUEUE queue, int option);
1314static bool eth_port_omc_addr (ETH_PORT eth_port_num,
1315 unsigned char crc8,
1316 ETH_QUEUE queue, int option);
1317#endif
1318
1319static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
1320 int byte_count);
1321
1322void eth_dbg (ETH_PORT_INFO * p_eth_port_ctrl);
1323
1324
1325typedef enum _memory_bank { BANK0, BANK1, BANK2, BANK3 } MEMORY_BANK;
1326u32 mv_get_dram_bank_base_addr (MEMORY_BANK bank)
1327{
1328 u32 result = 0;
1329 u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE);
1330
1331 if (enable & (1 << bank))
1332 return 0;
1333 if (bank == BANK0)
1334 result = MV_REG_READ (MV64460_CS_0_BASE_ADDR);
1335 if (bank == BANK1)
1336 result = MV_REG_READ (MV64460_CS_1_BASE_ADDR);
1337 if (bank == BANK2)
1338 result = MV_REG_READ (MV64460_CS_2_BASE_ADDR);
1339 if (bank == BANK3)
1340 result = MV_REG_READ (MV64460_CS_3_BASE_ADDR);
1341 result &= 0x0000ffff;
1342 result = result << 16;
1343 return result;
1344}
1345
1346u32 mv_get_dram_bank_size (MEMORY_BANK bank)
1347{
1348 u32 result = 0;
1349 u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE);
1350
1351 if (enable & (1 << bank))
1352 return 0;
1353 if (bank == BANK0)
1354 result = MV_REG_READ (MV64460_CS_0_SIZE);
1355 if (bank == BANK1)
1356 result = MV_REG_READ (MV64460_CS_1_SIZE);
1357 if (bank == BANK2)
1358 result = MV_REG_READ (MV64460_CS_2_SIZE);
1359 if (bank == BANK3)
1360 result = MV_REG_READ (MV64460_CS_3_SIZE);
1361 result += 1;
1362 result &= 0x0000ffff;
1363 result = result << 16;
1364 return result;
1365}
1366
1367u32 mv_get_internal_sram_base (void)
1368{
1369 u32 result;
1370
1371 result = MV_REG_READ (MV64460_INTEGRATED_SRAM_BASE_ADDR);
1372 result &= 0x0000ffff;
1373 result = result << 16;
1374 return result;
1375}
1376
1377/*******************************************************************************
1378* eth_port_init - Initialize the Ethernet port driver
1379*
1380* DESCRIPTION:
1381* This function prepares the ethernet port to start its activity:
1382* 1) Completes the ethernet port driver struct initialization toward port
1383* start routine.
1384* 2) Resets the device to a quiescent state in case of warm reboot.
1385* 3) Enable SDMA access to all four DRAM banks as well as internal SRAM.
1386* 4) Clean MAC tables. The reset status of those tables is unknown.
1387* 5) Set PHY address.
1388* Note: Call this routine prior to eth_port_start routine and after setting
1389* user values in the user fields of Ethernet port control struct (i.e.
1390* port_phy_addr).
1391*
1392* INPUT:
Wolfgang Denk53677ef2008-05-20 16:00:29 +02001393* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
wdenk3a473b22004-01-03 00:43:19 +00001394*
1395* OUTPUT:
1396* See description.
1397*
1398* RETURN:
1399* None.
1400*
1401*******************************************************************************/
1402static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl)
1403{
1404 int queue;
1405 ETH_WIN_PARAM win_param;
1406
1407 p_eth_port_ctrl->port_config = PORT_CONFIG_VALUE;
1408 p_eth_port_ctrl->port_config_extend = PORT_CONFIG_EXTEND_VALUE;
1409 p_eth_port_ctrl->port_sdma_config = PORT_SDMA_CONFIG_VALUE;
1410 p_eth_port_ctrl->port_serial_control = PORT_SERIAL_CONTROL_VALUE;
1411
1412 p_eth_port_ctrl->port_rx_queue_command = 0;
1413 p_eth_port_ctrl->port_tx_queue_command = 0;
1414
1415 /* Zero out SW structs */
1416 for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
1417 CURR_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
1418 USED_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
1419 p_eth_port_ctrl->rx_resource_err[queue] = false;
1420 }
1421
1422 for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
1423 CURR_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
1424 USED_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
1425 FIRST_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
1426 p_eth_port_ctrl->tx_resource_err[queue] = false;
1427 }
1428
1429 eth_port_reset (p_eth_port_ctrl->port_num);
1430
1431 /* Set access parameters for DRAM bank 0 */
1432 win_param.win = ETH_WIN0; /* Use Ethernet window 0 */
1433 win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */
1434 win_param.attributes = EBAR_ATTR_DRAM_CS0; /* Enable DRAM bank */
1435#ifndef CONFIG_NOT_COHERENT_CACHE
1436 win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
1437#endif
1438 win_param.high_addr = 0;
1439 /* Get bank base */
1440 win_param.base_addr = mv_get_dram_bank_base_addr (BANK0);
1441 win_param.size = mv_get_dram_bank_size (BANK0); /* Get bank size */
1442 if (win_param.size == 0)
1443 win_param.enable = 0;
1444 else
1445 win_param.enable = 1; /* Enable the access */
1446 win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
1447
1448 /* Set the access control for address window (EPAPR) READ & WRITE */
1449 eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
1450
1451 /* Set access parameters for DRAM bank 1 */
1452 win_param.win = ETH_WIN1; /* Use Ethernet window 1 */
1453 win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */
1454 win_param.attributes = EBAR_ATTR_DRAM_CS1; /* Enable DRAM bank */
1455#ifndef CONFIG_NOT_COHERENT_CACHE
1456 win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
1457#endif
1458 win_param.high_addr = 0;
1459 /* Get bank base */
1460 win_param.base_addr = mv_get_dram_bank_base_addr (BANK1);
1461 win_param.size = mv_get_dram_bank_size (BANK1); /* Get bank size */
1462 if (win_param.size == 0)
1463 win_param.enable = 0;
1464 else
1465 win_param.enable = 1; /* Enable the access */
1466 win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
1467
1468 /* Set the access control for address window (EPAPR) READ & WRITE */
1469 eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
1470
1471 /* Set access parameters for DRAM bank 2 */
1472 win_param.win = ETH_WIN2; /* Use Ethernet window 2 */
1473 win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */
1474 win_param.attributes = EBAR_ATTR_DRAM_CS2; /* Enable DRAM bank */
1475#ifndef CONFIG_NOT_COHERENT_CACHE
1476 win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
1477#endif
1478 win_param.high_addr = 0;
1479 /* Get bank base */
1480 win_param.base_addr = mv_get_dram_bank_base_addr (BANK2);
1481 win_param.size = mv_get_dram_bank_size (BANK2); /* Get bank size */
1482 if (win_param.size == 0)
1483 win_param.enable = 0;
1484 else
1485 win_param.enable = 1; /* Enable the access */
1486 win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
1487
1488 /* Set the access control for address window (EPAPR) READ & WRITE */
1489 eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
1490
1491 /* Set access parameters for DRAM bank 3 */
1492 win_param.win = ETH_WIN3; /* Use Ethernet window 3 */
1493 win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */
1494 win_param.attributes = EBAR_ATTR_DRAM_CS3; /* Enable DRAM bank */
1495#ifndef CONFIG_NOT_COHERENT_CACHE
1496 win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
1497#endif
1498 win_param.high_addr = 0;
1499 /* Get bank base */
1500 win_param.base_addr = mv_get_dram_bank_base_addr (BANK3);
1501 win_param.size = mv_get_dram_bank_size (BANK3); /* Get bank size */
1502 if (win_param.size == 0)
1503 win_param.enable = 0;
1504 else
1505 win_param.enable = 1; /* Enable the access */
1506 win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
1507
1508 /* Set the access control for address window (EPAPR) READ & WRITE */
1509 eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
1510
1511 /* Set access parameters for Internal SRAM */
1512 win_param.win = ETH_WIN4; /* Use Ethernet window 0 */
1513 win_param.target = EBAR_TARGET_CBS; /* Target - Internal SRAM */
1514 win_param.attributes = EBAR_ATTR_CBS_SRAM | EBAR_ATTR_CBS_SRAM_BLOCK0;
1515 win_param.high_addr = 0;
1516 win_param.base_addr = mv_get_internal_sram_base (); /* Get base addr */
1517 win_param.size = MV64460_INTERNAL_SRAM_SIZE; /* Get bank size */
1518 win_param.enable = 1; /* Enable the access */
1519 win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
1520
1521 /* Set the access control for address window (EPAPR) READ & WRITE */
1522 eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
1523
1524 eth_port_init_mac_tables (p_eth_port_ctrl->port_num);
1525
1526 ethernet_phy_set (p_eth_port_ctrl->port_num,
1527 p_eth_port_ctrl->port_phy_addr);
1528
1529 return;
1530
1531}
1532
1533/*******************************************************************************
1534* eth_port_start - Start the Ethernet port activity.
1535*
1536* DESCRIPTION:
1537* This routine prepares the Ethernet port for Rx and Tx activity:
1538* 1. Initialize Tx and Rx Current Descriptor Pointer for each queue that
1539* has been initialized a descriptor's ring (using ether_init_tx_desc_ring
1540* for Tx and ether_init_rx_desc_ring for Rx)
1541* 2. Initialize and enable the Ethernet configuration port by writing to
1542* the port's configuration and command registers.
1543* 3. Initialize and enable the SDMA by writing to the SDMA's
1544* configuration and command registers.
1545* After completing these steps, the ethernet port SDMA can starts to
1546* perform Rx and Tx activities.
1547*
1548* Note: Each Rx and Tx queue descriptor's list must be initialized prior
1549* to calling this function (use ether_init_tx_desc_ring for Tx queues and
1550* ether_init_rx_desc_ring for Rx queues).
1551*
1552* INPUT:
Wolfgang Denk53677ef2008-05-20 16:00:29 +02001553* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
wdenk3a473b22004-01-03 00:43:19 +00001554*
1555* OUTPUT:
1556* Ethernet port is ready to receive and transmit.
1557*
1558* RETURN:
1559* false if the port PHY is not up.
1560* true otherwise.
1561*
1562*******************************************************************************/
1563static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl)
1564{
1565 int queue;
1566 volatile ETH_TX_DESC *p_tx_curr_desc;
1567 volatile ETH_RX_DESC *p_rx_curr_desc;
1568 unsigned int phy_reg_data;
1569 ETH_PORT eth_port_num = p_eth_port_ctrl->port_num;
1570
1571
1572 /* Assignment of Tx CTRP of given queue */
1573 for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
1574 CURR_TFD_GET (p_tx_curr_desc, queue);
1575 MV_REG_WRITE ((MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0
1576 (eth_port_num)
1577 + (4 * queue)),
1578 ((unsigned int) p_tx_curr_desc));
1579
1580 }
1581
1582 /* Assignment of Rx CRDP of given queue */
1583 for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
1584 CURR_RFD_GET (p_rx_curr_desc, queue);
1585 MV_REG_WRITE ((MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0
1586 (eth_port_num)
1587 + (4 * queue)),
1588 ((unsigned int) p_rx_curr_desc));
1589
1590 if (p_rx_curr_desc != NULL)
1591 /* Add the assigned Ethernet address to the port's address table */
1592 eth_port_uc_addr_set (p_eth_port_ctrl->port_num,
1593 p_eth_port_ctrl->port_mac_addr,
1594 queue);
1595 }
1596
1597 /* Assign port configuration and command. */
1598 MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num),
1599 p_eth_port_ctrl->port_config);
1600
1601 MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
1602 p_eth_port_ctrl->port_config_extend);
1603
1604 MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
1605 p_eth_port_ctrl->port_serial_control);
1606
1607 MV_SET_REG_BITS (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
1608 ETH_SERIAL_PORT_ENABLE);
1609
1610 /* Assign port SDMA configuration */
1611 MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num),
1612 p_eth_port_ctrl->port_sdma_config);
1613
1614 MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT
1615 (eth_port_num), 0x3fffffff);
1616 MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG
1617 (eth_port_num), 0x03fffcff);
1618 /* Turn off the port/queue bandwidth limitation */
1619 MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (eth_port_num), 0x0);
1620
1621 /* Enable port Rx. */
1622 MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (eth_port_num),
1623 p_eth_port_ctrl->port_rx_queue_command);
1624
1625 /* Check if link is up */
1626 eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
1627
1628 if (!(phy_reg_data & 0x20))
1629 return false;
1630
1631 return true;
1632}
1633
1634/*******************************************************************************
1635* eth_port_uc_addr_set - This function Set the port Unicast address.
1636*
1637* DESCRIPTION:
1638* This function Set the port Ethernet MAC address.
1639*
1640* INPUT:
1641* ETH_PORT eth_port_num Port number.
1642* char * p_addr Address to be set
Wolfgang Denk53677ef2008-05-20 16:00:29 +02001643* ETH_QUEUE queue Rx queue number for this MAC address.
wdenk3a473b22004-01-03 00:43:19 +00001644*
1645* OUTPUT:
1646* Set MAC address low and high registers. also calls eth_port_uc_addr()
1647* To set the unicast table with the proper information.
1648*
1649* RETURN:
1650* N/A.
1651*
1652*******************************************************************************/
1653static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
1654 unsigned char *p_addr, ETH_QUEUE queue)
1655{
1656 unsigned int mac_h;
1657 unsigned int mac_l;
1658
1659 mac_l = (p_addr[4] << 8) | (p_addr[5]);
1660 mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) |
1661 (p_addr[2] << 8) | (p_addr[3] << 0);
1662
1663 MV_REG_WRITE (MV64460_ETH_MAC_ADDR_LOW (eth_port_num), mac_l);
1664 MV_REG_WRITE (MV64460_ETH_MAC_ADDR_HIGH (eth_port_num), mac_h);
1665
1666 /* Accept frames of this address */
1667 eth_port_uc_addr (eth_port_num, p_addr[5], queue, ACCEPT_MAC_ADDR);
1668
1669 return;
1670}
1671
1672/*******************************************************************************
1673* eth_port_uc_addr - This function Set the port unicast address table
1674*
1675* DESCRIPTION:
1676* This function locates the proper entry in the Unicast table for the
1677* specified MAC nibble and sets its properties according to function
1678* parameters.
1679*
1680* INPUT:
Wolfgang Denk53677ef2008-05-20 16:00:29 +02001681* ETH_PORT eth_port_num Port number.
wdenk3a473b22004-01-03 00:43:19 +00001682* unsigned char uc_nibble Unicast MAC Address last nibble.
Wolfgang Denk53677ef2008-05-20 16:00:29 +02001683* ETH_QUEUE queue Rx queue number for this MAC address.
1684* int option 0 = Add, 1 = remove address.
wdenk3a473b22004-01-03 00:43:19 +00001685*
1686* OUTPUT:
1687* This function add/removes MAC addresses from the port unicast address
1688* table.
1689*
1690* RETURN:
1691* true is output succeeded.
1692* false if option parameter is invalid.
1693*
1694*******************************************************************************/
1695static bool eth_port_uc_addr (ETH_PORT eth_port_num,
1696 unsigned char uc_nibble,
1697 ETH_QUEUE queue, int option)
1698{
1699 unsigned int unicast_reg;
1700 unsigned int tbl_offset;
1701 unsigned int reg_offset;
1702
1703 /* Locate the Unicast table entry */
1704 uc_nibble = (0xf & uc_nibble);
1705 tbl_offset = (uc_nibble / 4) * 4; /* Register offset from unicast table base */
1706 reg_offset = uc_nibble % 4; /* Entry offset within the above register */
1707
1708 switch (option) {
1709 case REJECT_MAC_ADDR:
1710 /* Clear accepts frame bit at specified unicast DA table entry */
1711 unicast_reg =
1712 MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
1713 (eth_port_num)
1714 + tbl_offset));
1715
1716 unicast_reg &= (0x0E << (8 * reg_offset));
1717
1718 MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
1719 (eth_port_num)
1720 + tbl_offset), unicast_reg);
1721 break;
1722
1723 case ACCEPT_MAC_ADDR:
1724 /* Set accepts frame bit at unicast DA filter table entry */
1725 unicast_reg =
1726 MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
1727 (eth_port_num)
1728 + tbl_offset));
1729
1730 unicast_reg |= ((0x01 | queue) << (8 * reg_offset));
1731
1732 MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
1733 (eth_port_num)
1734 + tbl_offset), unicast_reg);
1735
1736 break;
1737
1738 default:
1739 return false;
1740 }
1741 return true;
1742}
1743
1744#if 0 /* FIXME */
1745/*******************************************************************************
1746* eth_port_mc_addr - Multicast address settings.
1747*
1748* DESCRIPTION:
1749* This API controls the MV device MAC multicast support.
1750* The MV device supports multicast using two tables:
1751* 1) Special Multicast Table for MAC addresses of the form
1752* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF).
1753* The MAC DA[7:0] bits are used as a pointer to the Special Multicast
1754* Table entries in the DA-Filter table.
1755* In this case, the function calls eth_port_smc_addr() routine to set the
1756* Special Multicast Table.
1757* 2) Other Multicast Table for multicast of another type. A CRC-8bit
1758* is used as an index to the Other Multicast Table entries in the
1759* DA-Filter table.
1760* In this case, the function calculates the CRC-8bit value and calls
1761* eth_port_omc_addr() routine to set the Other Multicast Table.
1762* INPUT:
Wolfgang Denk53677ef2008-05-20 16:00:29 +02001763* ETH_PORT eth_port_num Port number.
1764* unsigned char *p_addr Unicast MAC Address.
1765* ETH_QUEUE queue Rx queue number for this MAC address.
1766* int option 0 = Add, 1 = remove address.
wdenk3a473b22004-01-03 00:43:19 +00001767*
1768* OUTPUT:
1769* See description.
1770*
1771* RETURN:
1772* true is output succeeded.
1773* false if add_address_table_entry( ) failed.
1774*
1775*******************************************************************************/
1776static void eth_port_mc_addr (ETH_PORT eth_port_num,
1777 unsigned char *p_addr,
1778 ETH_QUEUE queue, int option)
1779{
1780 unsigned int mac_h;
1781 unsigned int mac_l;
1782 unsigned char crc_result = 0;
1783 int mac_array[48];
1784 int crc[8];
1785 int i;
1786
1787
1788 if ((p_addr[0] == 0x01) &&
1789 (p_addr[1] == 0x00) &&
1790 (p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00))
1791
1792 eth_port_smc_addr (eth_port_num, p_addr[5], queue, option);
1793 else {
1794 /* Calculate CRC-8 out of the given address */
1795 mac_h = (p_addr[0] << 8) | (p_addr[1]);
1796 mac_l = (p_addr[2] << 24) | (p_addr[3] << 16) |
1797 (p_addr[4] << 8) | (p_addr[5] << 0);
1798
1799 for (i = 0; i < 32; i++)
1800 mac_array[i] = (mac_l >> i) & 0x1;
1801 for (i = 32; i < 48; i++)
1802 mac_array[i] = (mac_h >> (i - 32)) & 0x1;
1803
1804
1805 crc[0] = mac_array[45] ^ mac_array[43] ^ mac_array[40] ^
1806 mac_array[39] ^ mac_array[35] ^ mac_array[34] ^
1807 mac_array[31] ^ mac_array[30] ^ mac_array[28] ^
1808 mac_array[23] ^ mac_array[21] ^ mac_array[19] ^
1809 mac_array[18] ^ mac_array[16] ^ mac_array[14] ^
1810 mac_array[12] ^ mac_array[8] ^ mac_array[7] ^
1811 mac_array[6] ^ mac_array[0];
1812
1813 crc[1] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^
1814 mac_array[43] ^ mac_array[41] ^ mac_array[39] ^
1815 mac_array[36] ^ mac_array[34] ^ mac_array[32] ^
1816 mac_array[30] ^ mac_array[29] ^ mac_array[28] ^
1817 mac_array[24] ^ mac_array[23] ^ mac_array[22] ^
1818 mac_array[21] ^ mac_array[20] ^ mac_array[18] ^
1819 mac_array[17] ^ mac_array[16] ^ mac_array[15] ^
1820 mac_array[14] ^ mac_array[13] ^ mac_array[12] ^
1821 mac_array[9] ^ mac_array[6] ^ mac_array[1] ^
1822 mac_array[0];
1823
1824 crc[2] = mac_array[47] ^ mac_array[46] ^ mac_array[44] ^
1825 mac_array[43] ^ mac_array[42] ^ mac_array[39] ^
1826 mac_array[37] ^ mac_array[34] ^ mac_array[33] ^
1827 mac_array[29] ^ mac_array[28] ^ mac_array[25] ^
1828 mac_array[24] ^ mac_array[22] ^ mac_array[17] ^
1829 mac_array[15] ^ mac_array[13] ^ mac_array[12] ^
1830 mac_array[10] ^ mac_array[8] ^ mac_array[6] ^
1831 mac_array[2] ^ mac_array[1] ^ mac_array[0];
1832
1833 crc[3] = mac_array[47] ^ mac_array[45] ^ mac_array[44] ^
1834 mac_array[43] ^ mac_array[40] ^ mac_array[38] ^
1835 mac_array[35] ^ mac_array[34] ^ mac_array[30] ^
1836 mac_array[29] ^ mac_array[26] ^ mac_array[25] ^
1837 mac_array[23] ^ mac_array[18] ^ mac_array[16] ^
1838 mac_array[14] ^ mac_array[13] ^ mac_array[11] ^
1839 mac_array[9] ^ mac_array[7] ^ mac_array[3] ^
1840 mac_array[2] ^ mac_array[1];
1841
1842 crc[4] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^
1843 mac_array[41] ^ mac_array[39] ^ mac_array[36] ^
1844 mac_array[35] ^ mac_array[31] ^ mac_array[30] ^
1845 mac_array[27] ^ mac_array[26] ^ mac_array[24] ^
1846 mac_array[19] ^ mac_array[17] ^ mac_array[15] ^
1847 mac_array[14] ^ mac_array[12] ^ mac_array[10] ^
1848 mac_array[8] ^ mac_array[4] ^ mac_array[3] ^
1849 mac_array[2];
1850
1851 crc[5] = mac_array[47] ^ mac_array[46] ^ mac_array[45] ^
1852 mac_array[42] ^ mac_array[40] ^ mac_array[37] ^
1853 mac_array[36] ^ mac_array[32] ^ mac_array[31] ^
1854 mac_array[28] ^ mac_array[27] ^ mac_array[25] ^
1855 mac_array[20] ^ mac_array[18] ^ mac_array[16] ^
1856 mac_array[15] ^ mac_array[13] ^ mac_array[11] ^
1857 mac_array[9] ^ mac_array[5] ^ mac_array[4] ^
1858 mac_array[3];
1859
1860 crc[6] = mac_array[47] ^ mac_array[46] ^ mac_array[43] ^
1861 mac_array[41] ^ mac_array[38] ^ mac_array[37] ^
1862 mac_array[33] ^ mac_array[32] ^ mac_array[29] ^
1863 mac_array[28] ^ mac_array[26] ^ mac_array[21] ^
1864 mac_array[19] ^ mac_array[17] ^ mac_array[16] ^
1865 mac_array[14] ^ mac_array[12] ^ mac_array[10] ^
1866 mac_array[6] ^ mac_array[5] ^ mac_array[4];
1867
1868 crc[7] = mac_array[47] ^ mac_array[44] ^ mac_array[42] ^
1869 mac_array[39] ^ mac_array[38] ^ mac_array[34] ^
1870 mac_array[33] ^ mac_array[30] ^ mac_array[29] ^
1871 mac_array[27] ^ mac_array[22] ^ mac_array[20] ^
1872 mac_array[18] ^ mac_array[17] ^ mac_array[15] ^
1873 mac_array[13] ^ mac_array[11] ^ mac_array[7] ^
1874 mac_array[6] ^ mac_array[5];
1875
1876 for (i = 0; i < 8; i++)
1877 crc_result = crc_result | (crc[i] << i);
1878
1879 eth_port_omc_addr (eth_port_num, crc_result, queue, option);
1880 }
1881 return;
1882}
1883
1884/*******************************************************************************
1885* eth_port_smc_addr - Special Multicast address settings.
1886*
1887* DESCRIPTION:
1888* This routine controls the MV device special MAC multicast support.
1889* The Special Multicast Table for MAC addresses supports MAC of the form
1890* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF).
1891* The MAC DA[7:0] bits are used as a pointer to the Special Multicast
1892* Table entries in the DA-Filter table.
1893* This function set the Special Multicast Table appropriate entry
1894* according to the argument given.
1895*
1896* INPUT:
Wolfgang Denk53677ef2008-05-20 16:00:29 +02001897* ETH_PORT eth_port_num Port number.
1898* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits).
1899* ETH_QUEUE queue Rx queue number for this MAC address.
1900* int option 0 = Add, 1 = remove address.
wdenk3a473b22004-01-03 00:43:19 +00001901*
1902* OUTPUT:
1903* See description.
1904*
1905* RETURN:
1906* true is output succeeded.
1907* false if option parameter is invalid.
1908*
1909*******************************************************************************/
1910static bool eth_port_smc_addr (ETH_PORT eth_port_num,
1911 unsigned char mc_byte,
1912 ETH_QUEUE queue, int option)
1913{
1914 unsigned int smc_table_reg;
1915 unsigned int tbl_offset;
1916 unsigned int reg_offset;
1917
1918 /* Locate the SMC table entry */
1919 tbl_offset = (mc_byte / 4) * 4; /* Register offset from SMC table base */
1920 reg_offset = mc_byte % 4; /* Entry offset within the above register */
1921 queue &= 0x7;
1922
1923 switch (option) {
1924 case REJECT_MAC_ADDR:
1925 /* Clear accepts frame bit at specified Special DA table entry */
1926 smc_table_reg =
1927 MV_REG_READ ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
1928 smc_table_reg &= (0x0E << (8 * reg_offset));
1929
1930 MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg);
1931 break;
1932
1933 case ACCEPT_MAC_ADDR:
1934 /* Set accepts frame bit at specified Special DA table entry */
1935 smc_table_reg =
1936 MV_REG_READ ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
1937 smc_table_reg |= ((0x01 | queue) << (8 * reg_offset));
1938
1939 MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg);
1940 break;
1941
1942 default:
1943 return false;
1944 }
1945 return true;
1946}
1947
1948/*******************************************************************************
1949* eth_port_omc_addr - Multicast address settings.
1950*
1951* DESCRIPTION:
1952* This routine controls the MV device Other MAC multicast support.
1953* The Other Multicast Table is used for multicast of another type.
1954* A CRC-8bit is used as an index to the Other Multicast Table entries
1955* in the DA-Filter table.
1956* The function gets the CRC-8bit value from the calling routine and
1957* set the Other Multicast Table appropriate entry according to the
1958* CRC-8 argument given.
1959*
1960* INPUT:
Wolfgang Denk53677ef2008-05-20 16:00:29 +02001961* ETH_PORT eth_port_num Port number.
1962* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
1963* ETH_QUEUE queue Rx queue number for this MAC address.
1964* int option 0 = Add, 1 = remove address.
wdenk3a473b22004-01-03 00:43:19 +00001965*
1966* OUTPUT:
1967* See description.
1968*
1969* RETURN:
1970* true is output succeeded.
1971* false if option parameter is invalid.
1972*
1973*******************************************************************************/
1974static bool eth_port_omc_addr (ETH_PORT eth_port_num,
1975 unsigned char crc8,
1976 ETH_QUEUE queue, int option)
1977{
1978 unsigned int omc_table_reg;
1979 unsigned int tbl_offset;
1980 unsigned int reg_offset;
1981
1982 /* Locate the OMC table entry */
1983 tbl_offset = (crc8 / 4) * 4; /* Register offset from OMC table base */
1984 reg_offset = crc8 % 4; /* Entry offset within the above register */
1985 queue &= 0x7;
1986
1987 switch (option) {
1988 case REJECT_MAC_ADDR:
1989 /* Clear accepts frame bit at specified Other DA table entry */
1990 omc_table_reg =
1991 MV_REG_READ ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
1992 omc_table_reg &= (0x0E << (8 * reg_offset));
1993
1994 MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg);
1995 break;
1996
1997 case ACCEPT_MAC_ADDR:
1998 /* Set accepts frame bit at specified Other DA table entry */
1999 omc_table_reg =
2000 MV_REG_READ ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
2001 omc_table_reg |= ((0x01 | queue) << (8 * reg_offset));
2002
2003 MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg);
2004 break;
2005
2006 default:
2007 return false;
2008 }
2009 return true;
2010}
2011#endif
2012
2013/*******************************************************************************
2014* eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
2015*
2016* DESCRIPTION:
2017* Go through all the DA filter tables (Unicast, Special Multicast & Other
2018* Multicast) and set each entry to 0.
2019*
2020* INPUT:
2021* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
2022*
2023* OUTPUT:
2024* Multicast and Unicast packets are rejected.
2025*
2026* RETURN:
2027* None.
2028*
2029*******************************************************************************/
2030static void eth_port_init_mac_tables (ETH_PORT eth_port_num)
2031{
2032 int table_index;
2033
2034 /* Clear DA filter unicast table (Ex_dFUT) */
2035 for (table_index = 0; table_index <= 0xC; table_index += 4)
2036 MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
2037 (eth_port_num) + table_index), 0);
2038
2039 for (table_index = 0; table_index <= 0xFC; table_index += 4) {
2040 /* Clear DA filter special multicast table (Ex_dFSMT) */
2041 MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
2042 /* Clear DA filter other multicast table (Ex_dFOMT) */
2043 MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
2044 }
2045}
2046
2047/*******************************************************************************
2048* eth_clear_mib_counters - Clear all MIB counters
2049*
2050* DESCRIPTION:
2051* This function clears all MIB counters of a specific ethernet port.
2052* A read from the MIB counter will reset the counter.
2053*
2054* INPUT:
2055* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
2056*
2057* OUTPUT:
2058* After reading all MIB counters, the counters resets.
2059*
2060* RETURN:
2061* MIB counter value.
2062*
2063*******************************************************************************/
2064static void eth_clear_mib_counters (ETH_PORT eth_port_num)
2065{
2066 int i;
2067 unsigned int dummy;
2068
2069 /* Perform dummy reads from MIB counters */
2070 for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION;
2071 i += 4)
2072 dummy = MV_REG_READ ((MV64460_ETH_MIB_COUNTERS_BASE
2073 (eth_port_num) + i));
2074
2075 return;
2076}
2077
2078/*******************************************************************************
2079* eth_read_mib_counter - Read a MIB counter
2080*
2081* DESCRIPTION:
2082* This function reads a MIB counter of a specific ethernet port.
2083* NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the
2084* following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH
2085* register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and
2086* ETH_MIB_GOOD_OCTETS_SENT_HIGH
2087*
2088* INPUT:
2089* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
2090* unsigned int mib_offset MIB counter offset (use ETH_MIB_... macros).
2091*
2092* OUTPUT:
2093* After reading the MIB counter, the counter resets.
2094*
2095* RETURN:
2096* MIB counter value.
2097*
2098*******************************************************************************/
2099unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
2100 unsigned int mib_offset)
2101{
2102 return (MV_REG_READ (MV64460_ETH_MIB_COUNTERS_BASE (eth_port_num)
2103 + mib_offset));
2104}
2105
2106/*******************************************************************************
2107* ethernet_phy_set - Set the ethernet port PHY address.
2108*
2109* DESCRIPTION:
2110* This routine set the ethernet port PHY address according to given
2111* parameter.
2112*
2113* INPUT:
2114* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
2115*
2116* OUTPUT:
2117* Set PHY Address Register with given PHY address parameter.
2118*
2119* RETURN:
2120* None.
2121*
2122*******************************************************************************/
2123static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr)
2124{
2125 unsigned int reg_data;
2126
2127 reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG);
2128
2129 reg_data &= ~(0x1F << (5 * eth_port_num));
2130 reg_data |= (phy_addr << (5 * eth_port_num));
2131
2132 MV_REG_WRITE (MV64460_ETH_PHY_ADDR_REG, reg_data);
2133
2134 return;
2135}
2136
2137/*******************************************************************************
2138 * ethernet_phy_get - Get the ethernet port PHY address.
2139 *
2140 * DESCRIPTION:
2141 * This routine returns the given ethernet port PHY address.
2142 *
2143 * INPUT:
2144 * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
2145 *
2146 * OUTPUT:
2147 * None.
2148 *
2149 * RETURN:
2150 * PHY address.
2151 *
2152 *******************************************************************************/
2153static int ethernet_phy_get (ETH_PORT eth_port_num)
2154{
2155 unsigned int reg_data;
2156
2157 reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG);
2158
2159 return ((reg_data >> (5 * eth_port_num)) & 0x1f);
2160}
2161
2162/*******************************************************************************
2163 * ethernet_phy_reset - Reset Ethernet port PHY.
2164 *
2165 * DESCRIPTION:
2166 * This routine utilize the SMI interface to reset the ethernet port PHY.
2167 * The routine waits until the link is up again or link up is timeout.
2168 *
2169 * INPUT:
2170 * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
2171 *
2172 * OUTPUT:
2173 * The ethernet port PHY renew its link.
2174 *
2175 * RETURN:
2176 * None.
2177 *
2178*******************************************************************************/
2179static bool ethernet_phy_reset (ETH_PORT eth_port_num)
2180{
2181 unsigned int time_out = 50;
2182 unsigned int phy_reg_data;
2183
2184 /* Reset the PHY */
2185 eth_port_read_smi_reg (eth_port_num, 0, &phy_reg_data);
2186 phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */
2187 eth_port_write_smi_reg (eth_port_num, 0, phy_reg_data);
2188
2189 /* Poll on the PHY LINK */
2190 do {
2191 eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
2192
2193 if (time_out-- == 0)
2194 return false;
2195 }
2196 while (!(phy_reg_data & 0x20));
2197
2198 return true;
2199}
2200
2201/*******************************************************************************
2202 * eth_port_reset - Reset Ethernet port
2203 *
2204 * DESCRIPTION:
Wolfgang Denk53677ef2008-05-20 16:00:29 +02002205 * This routine resets the chip by aborting any SDMA engine activity and
wdenk3a473b22004-01-03 00:43:19 +00002206 * clearing the MIB counters. The Receiver and the Transmit unit are in
2207 * idle state after this command is performed and the port is disabled.
2208 *
2209 * INPUT:
2210 * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
2211 *
2212 * OUTPUT:
2213 * Channel activity is halted.
2214 *
2215 * RETURN:
2216 * None.
2217 *
2218 *******************************************************************************/
2219static void eth_port_reset (ETH_PORT eth_port_num)
2220{
2221 unsigned int reg_data;
2222
2223 /* Stop Tx port activity. Check port Tx activity. */
2224 reg_data =
2225 MV_REG_READ (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
2226 (eth_port_num));
2227
2228 if (reg_data & 0xFF) {
2229 /* Issue stop command for active channels only */
2230 MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
2231 (eth_port_num), (reg_data << 8));
2232
2233 /* Wait for all Tx activity to terminate. */
2234 do {
2235 /* Check port cause register that all Tx queues are stopped */
2236 reg_data =
2237 MV_REG_READ
2238 (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
2239 (eth_port_num));
2240 }
2241 while (reg_data & 0xFF);
2242 }
2243
2244 /* Stop Rx port activity. Check port Rx activity. */
2245 reg_data =
2246 MV_REG_READ (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
2247 (eth_port_num));
2248
2249 if (reg_data & 0xFF) {
2250 /* Issue stop command for active channels only */
2251 MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
2252 (eth_port_num), (reg_data << 8));
2253
2254 /* Wait for all Rx activity to terminate. */
2255 do {
2256 /* Check port cause register that all Rx queues are stopped */
2257 reg_data =
2258 MV_REG_READ
2259 (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
2260 (eth_port_num));
2261 }
2262 while (reg_data & 0xFF);
2263 }
2264
2265
2266 /* Clear all MIB counters */
2267 eth_clear_mib_counters (eth_port_num);
2268
2269 /* Reset the Enable bit in the Configuration Register */
2270 reg_data =
2271 MV_REG_READ (MV64460_ETH_PORT_SERIAL_CONTROL_REG
2272 (eth_port_num));
2273 reg_data &= ~ETH_SERIAL_PORT_ENABLE;
2274 MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
2275 reg_data);
2276
2277 return;
2278}
2279
2280#if 0 /* Not needed here */
2281/*******************************************************************************
2282 * ethernet_set_config_reg - Set specified bits in configuration register.
2283 *
2284 * DESCRIPTION:
2285 * This function sets specified bits in the given ethernet
2286 * configuration register.
2287 *
2288 * INPUT:
2289 * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
2290 * unsigned int value 32 bit value.
2291 *
2292 * OUTPUT:
2293 * The set bits in the value parameter are set in the configuration
2294 * register.
2295 *
2296 * RETURN:
2297 * None.
2298 *
2299 *******************************************************************************/
2300static void ethernet_set_config_reg (ETH_PORT eth_port_num,
2301 unsigned int value)
2302{
2303 unsigned int eth_config_reg;
2304
2305 eth_config_reg =
2306 MV_REG_READ (MV64460_ETH_PORT_CONFIG_REG (eth_port_num));
2307 eth_config_reg |= value;
2308 MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num),
2309 eth_config_reg);
2310
2311 return;
2312}
2313#endif
2314
2315#if 0 /* FIXME */
2316/*******************************************************************************
2317 * ethernet_reset_config_reg - Reset specified bits in configuration register.
2318 *
2319 * DESCRIPTION:
2320 * This function resets specified bits in the given Ethernet
2321 * configuration register.
2322 *
2323 * INPUT:
2324 * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
2325 * unsigned int value 32 bit value.
2326 *
2327 * OUTPUT:
2328 * The set bits in the value parameter are reset in the configuration
2329 * register.
2330 *
2331 * RETURN:
2332 * None.
2333 *
2334 *******************************************************************************/
2335static void ethernet_reset_config_reg (ETH_PORT eth_port_num,
2336 unsigned int value)
2337{
2338 unsigned int eth_config_reg;
2339
2340 eth_config_reg = MV_REG_READ (MV64460_ETH_PORT_CONFIG_EXTEND_REG
2341 (eth_port_num));
2342 eth_config_reg &= ~value;
2343 MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
2344 eth_config_reg);
2345
2346 return;
2347}
2348#endif
2349
2350#if 0 /* Not needed here */
2351/*******************************************************************************
2352 * ethernet_get_config_reg - Get the port configuration register
2353 *
2354 * DESCRIPTION:
2355 * This function returns the configuration register value of the given
2356 * ethernet port.
2357 *
2358 * INPUT:
2359 * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
2360 *
2361 * OUTPUT:
2362 * None.
2363 *
2364 * RETURN:
2365 * Port configuration register value.
2366 *
2367 *******************************************************************************/
2368static unsigned int ethernet_get_config_reg (ETH_PORT eth_port_num)
2369{
2370 unsigned int eth_config_reg;
2371
2372 eth_config_reg = MV_REG_READ (MV64460_ETH_PORT_CONFIG_EXTEND_REG
2373 (eth_port_num));
2374 return eth_config_reg;
2375}
2376
2377#endif
2378
2379/*******************************************************************************
2380 * eth_port_read_smi_reg - Read PHY registers
2381 *
2382 * DESCRIPTION:
2383 * This routine utilize the SMI interface to interact with the PHY in
2384 * order to perform PHY register read.
2385 *
2386 * INPUT:
2387 * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
2388 * unsigned int phy_reg PHY register address offset.
2389 * unsigned int *value Register value buffer.
2390 *
2391 * OUTPUT:
2392 * Write the value of a specified PHY register into given buffer.
2393 *
2394 * RETURN:
2395 * false if the PHY is busy or read data is not in valid state.
2396 * true otherwise.
2397 *
2398 *******************************************************************************/
2399static bool eth_port_read_smi_reg (ETH_PORT eth_port_num,
2400 unsigned int phy_reg, unsigned int *value)
2401{
2402 unsigned int reg_value;
2403 unsigned int time_out = PHY_BUSY_TIMEOUT;
2404 int phy_addr;
2405
2406 phy_addr = ethernet_phy_get (eth_port_num);
2407/* printf(" Phy-Port %d has addess %d \n",eth_port_num, phy_addr );*/
2408
2409 /* first check that it is not busy */
2410 do {
2411 reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
2412 if (time_out-- == 0) {
2413 return false;
2414 }
2415 }
2416 while (reg_value & ETH_SMI_BUSY);
2417
2418 /* not busy */
2419
2420 MV_REG_WRITE (MV64460_ETH_SMI_REG,
2421 (phy_addr << 16) | (phy_reg << 21) |
2422 ETH_SMI_OPCODE_READ);
2423
2424 time_out = PHY_BUSY_TIMEOUT; /* initialize the time out var again */
2425
2426 do {
2427 reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
2428 if (time_out-- == 0) {
2429 return false;
2430 }
2431 }
2432 while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */
2433
2434 /* Wait for the data to update in the SMI register */
2435#define PHY_UPDATE_TIMEOUT 10000
2436 for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++);
2437
2438 reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
2439
2440 *value = reg_value & 0xffff;
2441
2442 return true;
2443}
2444
2445/*******************************************************************************
2446 * eth_port_write_smi_reg - Write to PHY registers
2447 *
2448 * DESCRIPTION:
2449 * This routine utilize the SMI interface to interact with the PHY in
2450 * order to perform writes to PHY registers.
2451 *
2452 * INPUT:
2453 * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
2454 * unsigned int phy_reg PHY register address offset.
2455 * unsigned int value Register value.
2456 *
2457 * OUTPUT:
2458 * Write the given value to the specified PHY register.
2459 *
2460 * RETURN:
2461 * false if the PHY is busy.
2462 * true otherwise.
2463 *
2464 *******************************************************************************/
2465static bool eth_port_write_smi_reg (ETH_PORT eth_port_num,
2466 unsigned int phy_reg, unsigned int value)
2467{
2468 unsigned int reg_value;
2469 unsigned int time_out = PHY_BUSY_TIMEOUT;
2470 int phy_addr;
2471
2472 phy_addr = ethernet_phy_get (eth_port_num);
2473
2474 /* first check that it is not busy */
2475 do {
2476 reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
2477 if (time_out-- == 0) {
2478 return false;
2479 }
2480 }
2481 while (reg_value & ETH_SMI_BUSY);
2482
2483 /* not busy */
2484 MV_REG_WRITE (MV64460_ETH_SMI_REG,
2485 (phy_addr << 16) | (phy_reg << 21) |
2486 ETH_SMI_OPCODE_WRITE | (value & 0xffff));
2487 return true;
2488}
2489
2490/*******************************************************************************
2491 * eth_set_access_control - Config address decode parameters for Ethernet unit
2492 *
2493 * DESCRIPTION:
2494 * This function configures the address decode parameters for the Gigabit
2495 * Ethernet Controller according the given parameters struct.
2496 *
2497 * INPUT:
2498 * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
2499 * ETH_WIN_PARAM *param Address decode parameter struct.
2500 *
2501 * OUTPUT:
2502 * An access window is opened using the given access parameters.
2503 *
2504 * RETURN:
2505 * None.
2506 *
2507 *******************************************************************************/
2508static void eth_set_access_control (ETH_PORT eth_port_num,
2509 ETH_WIN_PARAM * param)
2510{
2511 unsigned int access_prot_reg;
2512
2513 /* Set access control register */
2514 access_prot_reg = MV_REG_READ (MV64460_ETH_ACCESS_PROTECTION_REG
2515 (eth_port_num));
2516 access_prot_reg &= (~(3 << (param->win * 2))); /* clear window permission */
2517 access_prot_reg |= (param->access_ctrl << (param->win * 2));
2518 MV_REG_WRITE (MV64460_ETH_ACCESS_PROTECTION_REG (eth_port_num),
2519 access_prot_reg);
2520
2521 /* Set window Size reg (SR) */
2522 MV_REG_WRITE ((MV64460_ETH_SIZE_REG_0 +
2523 (ETH_SIZE_REG_GAP * param->win)),
2524 (((param->size / 0x10000) - 1) << 16));
2525
2526 /* Set window Base address reg (BA) */
2527 MV_REG_WRITE ((MV64460_ETH_BAR_0 + (ETH_BAR_GAP * param->win)),
2528 (param->target | param->attributes | param->base_addr));
2529 /* High address remap reg (HARR) */
2530 if (param->win < 4)
2531 MV_REG_WRITE ((MV64460_ETH_HIGH_ADDR_REMAP_REG_0 +
2532 (ETH_HIGH_ADDR_REMAP_REG_GAP * param->win)),
2533 param->high_addr);
2534
2535 /* Base address enable reg (BARER) */
2536 if (param->enable == 1)
2537 MV_RESET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG,
2538 (1 << param->win));
2539 else
2540 MV_SET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG,
2541 (1 << param->win));
2542}
2543
2544/*******************************************************************************
2545 * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
2546 *
2547 * DESCRIPTION:
2548 * This function prepares a Rx chained list of descriptors and packet
2549 * buffers in a form of a ring. The routine must be called after port
2550 * initialization routine and before port start routine.
2551 * The Ethernet SDMA engine uses CPU bus addresses to access the various
2552 * devices in the system (i.e. DRAM). This function uses the ethernet
2553 * struct 'virtual to physical' routine (set by the user) to set the ring
2554 * with physical addresses.
2555 *
2556 * INPUT:
2557 * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
Wolfgang Denk53677ef2008-05-20 16:00:29 +02002558 * ETH_QUEUE rx_queue Number of Rx queue.
2559 * int rx_desc_num Number of Rx descriptors
2560 * int rx_buff_size Size of Rx buffer
wdenk3a473b22004-01-03 00:43:19 +00002561 * unsigned int rx_desc_base_addr Rx descriptors memory area base addr.
2562 * unsigned int rx_buff_base_addr Rx buffer memory area base addr.
2563 *
2564 * OUTPUT:
2565 * The routine updates the Ethernet port control struct with information
2566 * regarding the Rx descriptors and buffers.
2567 *
2568 * RETURN:
2569 * false if the given descriptors memory area is not aligned according to
2570 * Ethernet SDMA specifications.
2571 * true otherwise.
2572 *
2573 *******************************************************************************/
2574static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
2575 ETH_QUEUE rx_queue,
2576 int rx_desc_num,
2577 int rx_buff_size,
2578 unsigned int rx_desc_base_addr,
2579 unsigned int rx_buff_base_addr)
2580{
2581 ETH_RX_DESC *p_rx_desc;
2582 ETH_RX_DESC *p_rx_prev_desc; /* pointer to link with the last descriptor */
2583 unsigned int buffer_addr;
2584 int ix; /* a counter */
2585
2586
2587 p_rx_desc = (ETH_RX_DESC *) rx_desc_base_addr;
2588 p_rx_prev_desc = p_rx_desc;
2589 buffer_addr = rx_buff_base_addr;
2590
2591 /* Rx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
2592 if (rx_buff_base_addr & 0xF)
2593 return false;
2594
2595 /* Rx buffers are limited to 64K bytes and Minimum size is 8 bytes */
2596 if ((rx_buff_size < 8) || (rx_buff_size > RX_BUFFER_MAX_SIZE))
2597 return false;
2598
2599 /* Rx buffers must be 64-bit aligned. */
2600 if ((rx_buff_base_addr + rx_buff_size) & 0x7)
2601 return false;
2602
2603 /* initialize the Rx descriptors ring */
2604 for (ix = 0; ix < rx_desc_num; ix++) {
2605 p_rx_desc->buf_size = rx_buff_size;
2606 p_rx_desc->byte_cnt = 0x0000;
2607 p_rx_desc->cmd_sts =
2608 ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
2609 p_rx_desc->next_desc_ptr =
2610 ((unsigned int) p_rx_desc) + RX_DESC_ALIGNED_SIZE;
2611 p_rx_desc->buf_ptr = buffer_addr;
2612 p_rx_desc->return_info = 0x00000000;
2613 D_CACHE_FLUSH_LINE (p_rx_desc, 0);
2614 buffer_addr += rx_buff_size;
2615 p_rx_prev_desc = p_rx_desc;
2616 p_rx_desc = (ETH_RX_DESC *)
2617 ((unsigned int) p_rx_desc + RX_DESC_ALIGNED_SIZE);
2618 }
2619
2620 /* Closing Rx descriptors ring */
2621 p_rx_prev_desc->next_desc_ptr = (rx_desc_base_addr);
2622 D_CACHE_FLUSH_LINE (p_rx_prev_desc, 0);
2623
2624 /* Save Rx desc pointer to driver struct. */
2625 CURR_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
2626 USED_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
2627
2628 p_eth_port_ctrl->p_rx_desc_area_base[rx_queue] =
2629 (ETH_RX_DESC *) rx_desc_base_addr;
2630 p_eth_port_ctrl->rx_desc_area_size[rx_queue] =
2631 rx_desc_num * RX_DESC_ALIGNED_SIZE;
2632
2633 p_eth_port_ctrl->port_rx_queue_command |= (1 << rx_queue);
2634
2635 return true;
2636}
2637
2638/*******************************************************************************
2639 * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory.
2640 *
2641 * DESCRIPTION:
2642 * This function prepares a Tx chained list of descriptors and packet
2643 * buffers in a form of a ring. The routine must be called after port
2644 * initialization routine and before port start routine.
2645 * The Ethernet SDMA engine uses CPU bus addresses to access the various
2646 * devices in the system (i.e. DRAM). This function uses the ethernet
2647 * struct 'virtual to physical' routine (set by the user) to set the ring
2648 * with physical addresses.
2649 *
2650 * INPUT:
2651 * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
Wolfgang Denk53677ef2008-05-20 16:00:29 +02002652 * ETH_QUEUE tx_queue Number of Tx queue.
2653 * int tx_desc_num Number of Tx descriptors
2654 * int tx_buff_size Size of Tx buffer
wdenk3a473b22004-01-03 00:43:19 +00002655 * unsigned int tx_desc_base_addr Tx descriptors memory area base addr.
2656 * unsigned int tx_buff_base_addr Tx buffer memory area base addr.
2657 *
2658 * OUTPUT:
2659 * The routine updates the Ethernet port control struct with information
2660 * regarding the Tx descriptors and buffers.
2661 *
2662 * RETURN:
2663 * false if the given descriptors memory area is not aligned according to
2664 * Ethernet SDMA specifications.
2665 * true otherwise.
2666 *
2667 *******************************************************************************/
2668static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
2669 ETH_QUEUE tx_queue,
2670 int tx_desc_num,
2671 int tx_buff_size,
2672 unsigned int tx_desc_base_addr,
2673 unsigned int tx_buff_base_addr)
2674{
2675
2676 ETH_TX_DESC *p_tx_desc;
2677 ETH_TX_DESC *p_tx_prev_desc;
2678 unsigned int buffer_addr;
2679 int ix; /* a counter */
2680
2681
2682 /* save the first desc pointer to link with the last descriptor */
2683 p_tx_desc = (ETH_TX_DESC *) tx_desc_base_addr;
2684 p_tx_prev_desc = p_tx_desc;
2685 buffer_addr = tx_buff_base_addr;
2686
2687 /* Tx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
2688 if (tx_buff_base_addr & 0xF)
2689 return false;
2690
2691 /* Tx buffers are limited to 64K bytes and Minimum size is 8 bytes */
2692 if ((tx_buff_size > TX_BUFFER_MAX_SIZE)
2693 || (tx_buff_size < TX_BUFFER_MIN_SIZE))
2694 return false;
2695
2696 /* Initialize the Tx descriptors ring */
2697 for (ix = 0; ix < tx_desc_num; ix++) {
2698 p_tx_desc->byte_cnt = 0x0000;
2699 p_tx_desc->l4i_chk = 0x0000;
2700 p_tx_desc->cmd_sts = 0x00000000;
2701 p_tx_desc->next_desc_ptr =
2702 ((unsigned int) p_tx_desc) + TX_DESC_ALIGNED_SIZE;
2703
2704 p_tx_desc->buf_ptr = buffer_addr;
2705 p_tx_desc->return_info = 0x00000000;
2706 D_CACHE_FLUSH_LINE (p_tx_desc, 0);
2707 buffer_addr += tx_buff_size;
2708 p_tx_prev_desc = p_tx_desc;
2709 p_tx_desc = (ETH_TX_DESC *)
2710 ((unsigned int) p_tx_desc + TX_DESC_ALIGNED_SIZE);
2711
2712 }
2713 /* Closing Tx descriptors ring */
2714 p_tx_prev_desc->next_desc_ptr = tx_desc_base_addr;
2715 D_CACHE_FLUSH_LINE (p_tx_prev_desc, 0);
2716 /* Set Tx desc pointer in driver struct. */
2717 CURR_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
2718 USED_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
2719
2720 /* Init Tx ring base and size parameters */
2721 p_eth_port_ctrl->p_tx_desc_area_base[tx_queue] =
2722 (ETH_TX_DESC *) tx_desc_base_addr;
2723 p_eth_port_ctrl->tx_desc_area_size[tx_queue] =
2724 (tx_desc_num * TX_DESC_ALIGNED_SIZE);
2725
2726 /* Add the queue to the list of Tx queues of this port */
2727 p_eth_port_ctrl->port_tx_queue_command |= (1 << tx_queue);
2728
2729 return true;
2730}
2731
2732/*******************************************************************************
2733 * eth_port_send - Send an Ethernet packet
2734 *
2735 * DESCRIPTION:
2736 * This routine send a given packet described by p_pktinfo parameter. It
2737 * supports transmitting of a packet spaned over multiple buffers. The
2738 * routine updates 'curr' and 'first' indexes according to the packet
2739 * segment passed to the routine. In case the packet segment is first,
2740 * the 'first' index is update. In any case, the 'curr' index is updated.
2741 * If the routine get into Tx resource error it assigns 'curr' index as
2742 * 'first'. This way the function can abort Tx process of multiple
2743 * descriptors per packet.
2744 *
2745 * INPUT:
2746 * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
Wolfgang Denk53677ef2008-05-20 16:00:29 +02002747 * ETH_QUEUE tx_queue Number of Tx queue.
wdenk3a473b22004-01-03 00:43:19 +00002748 * PKT_INFO *p_pkt_info User packet buffer.
2749 *
2750 * OUTPUT:
2751 * Tx ring 'curr' and 'first' indexes are updated.
2752 *
2753 * RETURN:
2754 * ETH_QUEUE_FULL in case of Tx resource error.
2755 * ETH_ERROR in case the routine can not access Tx desc ring.
2756 * ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource.
2757 * ETH_OK otherwise.
2758 *
2759 *******************************************************************************/
2760static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl,
2761 ETH_QUEUE tx_queue,
2762 PKT_INFO * p_pkt_info)
2763{
2764 volatile ETH_TX_DESC *p_tx_desc_first;
2765 volatile ETH_TX_DESC *p_tx_desc_curr;
2766 volatile ETH_TX_DESC *p_tx_next_desc_curr;
2767 volatile ETH_TX_DESC *p_tx_desc_used;
2768 unsigned int command_status;
2769
2770 /* Do not process Tx ring in case of Tx ring resource error */
2771 if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
2772 return ETH_QUEUE_FULL;
2773
2774 /* Get the Tx Desc ring indexes */
2775 CURR_TFD_GET (p_tx_desc_curr, tx_queue);
2776 USED_TFD_GET (p_tx_desc_used, tx_queue);
2777
2778 if (p_tx_desc_curr == NULL)
2779 return ETH_ERROR;
2780
2781 /* The following parameters are used to save readings from memory */
2782 p_tx_next_desc_curr = TX_NEXT_DESC_PTR (p_tx_desc_curr, tx_queue);
2783 command_status = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC;
2784
2785 if (command_status & (ETH_TX_FIRST_DESC)) {
2786 /* Update first desc */
2787 FIRST_TFD_SET (p_tx_desc_curr, tx_queue);
2788 p_tx_desc_first = p_tx_desc_curr;
2789 } else {
2790 FIRST_TFD_GET (p_tx_desc_first, tx_queue);
2791 command_status |= ETH_BUFFER_OWNED_BY_DMA;
2792 }
2793
2794 /* Buffers with a payload smaller than 8 bytes must be aligned to 64-bit */
2795 /* boundary. We use the memory allocated for Tx descriptor. This memory */
2796 /* located in TX_BUF_OFFSET_IN_DESC offset within the Tx descriptor. */
2797 if (p_pkt_info->byte_cnt <= 8) {
2798 printf ("You have failed in the < 8 bytes errata - fixme\n"); /* RABEEH - TBD */
2799 return ETH_ERROR;
2800
2801 p_tx_desc_curr->buf_ptr =
2802 (unsigned int) p_tx_desc_curr + TX_BUF_OFFSET_IN_DESC;
2803 eth_b_copy (p_pkt_info->buf_ptr, p_tx_desc_curr->buf_ptr,
2804 p_pkt_info->byte_cnt);
2805 } else
2806 p_tx_desc_curr->buf_ptr = p_pkt_info->buf_ptr;
2807
2808 p_tx_desc_curr->byte_cnt = p_pkt_info->byte_cnt;
2809 p_tx_desc_curr->return_info = p_pkt_info->return_info;
2810
2811 if (p_pkt_info->cmd_sts & (ETH_TX_LAST_DESC)) {
2812 /* Set last desc with DMA ownership and interrupt enable. */
2813 p_tx_desc_curr->cmd_sts = command_status |
2814 ETH_BUFFER_OWNED_BY_DMA | ETH_TX_ENABLE_INTERRUPT;
2815
2816 if (p_tx_desc_curr != p_tx_desc_first)
2817 p_tx_desc_first->cmd_sts |= ETH_BUFFER_OWNED_BY_DMA;
2818
2819 /* Flush CPU pipe */
2820
2821 D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
2822 D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_first, 0);
2823 CPU_PIPE_FLUSH;
2824
2825 /* Apply send command */
2826 ETH_ENABLE_TX_QUEUE (tx_queue, p_eth_port_ctrl->port_num);
2827
2828 /* Finish Tx packet. Update first desc in case of Tx resource error */
2829 p_tx_desc_first = p_tx_next_desc_curr;
2830 FIRST_TFD_SET (p_tx_desc_first, tx_queue);
2831
2832 } else {
2833 p_tx_desc_curr->cmd_sts = command_status;
2834 D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
2835 }
2836
2837 /* Check for ring index overlap in the Tx desc ring */
2838 if (p_tx_next_desc_curr == p_tx_desc_used) {
2839 /* Update the current descriptor */
2840 CURR_TFD_SET (p_tx_desc_first, tx_queue);
2841
2842 p_eth_port_ctrl->tx_resource_err[tx_queue] = true;
2843 return ETH_QUEUE_LAST_RESOURCE;
2844 } else {
2845 /* Update the current descriptor */
2846 CURR_TFD_SET (p_tx_next_desc_curr, tx_queue);
2847 return ETH_OK;
2848 }
2849}
2850
2851/*******************************************************************************
2852 * eth_tx_return_desc - Free all used Tx descriptors
2853 *
2854 * DESCRIPTION:
2855 * This routine returns the transmitted packet information to the caller.
2856 * It uses the 'first' index to support Tx desc return in case a transmit
2857 * of a packet spanned over multiple buffer still in process.
2858 * In case the Tx queue was in "resource error" condition, where there are
2859 * no available Tx resources, the function resets the resource error flag.
2860 *
2861 * INPUT:
2862 * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
Wolfgang Denk53677ef2008-05-20 16:00:29 +02002863 * ETH_QUEUE tx_queue Number of Tx queue.
wdenk3a473b22004-01-03 00:43:19 +00002864 * PKT_INFO *p_pkt_info User packet buffer.
2865 *
2866 * OUTPUT:
2867 * Tx ring 'first' and 'used' indexes are updated.
2868 *
2869 * RETURN:
2870 * ETH_ERROR in case the routine can not access Tx desc ring.
2871 * ETH_RETRY in case there is transmission in process.
2872 * ETH_END_OF_JOB if the routine has nothing to release.
2873 * ETH_OK otherwise.
2874 *
2875 *******************************************************************************/
2876static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
2877 p_eth_port_ctrl,
2878 ETH_QUEUE tx_queue,
2879 PKT_INFO * p_pkt_info)
2880{
2881 volatile ETH_TX_DESC *p_tx_desc_used = NULL;
2882 volatile ETH_TX_DESC *p_tx_desc_first = NULL;
2883 unsigned int command_status;
2884
2885
2886 /* Get the Tx Desc ring indexes */
2887 USED_TFD_GET (p_tx_desc_used, tx_queue);
2888 FIRST_TFD_GET (p_tx_desc_first, tx_queue);
2889
2890
2891 /* Sanity check */
2892 if (p_tx_desc_used == NULL)
2893 return ETH_ERROR;
2894
2895 command_status = p_tx_desc_used->cmd_sts;
2896
2897 /* Still transmitting... */
2898 if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
2899 D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
2900 return ETH_RETRY;
2901 }
2902
2903 /* Stop release. About to overlap the current available Tx descriptor */
2904 if ((p_tx_desc_used == p_tx_desc_first) &&
2905 (p_eth_port_ctrl->tx_resource_err[tx_queue] == false)) {
2906 D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
2907 return ETH_END_OF_JOB;
2908 }
2909
2910 /* Pass the packet information to the caller */
2911 p_pkt_info->cmd_sts = command_status;
2912 p_pkt_info->return_info = p_tx_desc_used->return_info;
2913 p_tx_desc_used->return_info = 0;
2914
2915 /* Update the next descriptor to release. */
2916 USED_TFD_SET (TX_NEXT_DESC_PTR (p_tx_desc_used, tx_queue), tx_queue);
2917
2918 /* Any Tx return cancels the Tx resource error status */
2919 if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
2920 p_eth_port_ctrl->tx_resource_err[tx_queue] = false;
2921
2922 D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
2923
2924 return ETH_OK;
2925
2926}
2927
2928/*******************************************************************************
2929 * eth_port_receive - Get received information from Rx ring.
2930 *
2931 * DESCRIPTION:
Wolfgang Denk53677ef2008-05-20 16:00:29 +02002932 * This routine returns the received data to the caller. There is no
wdenk3a473b22004-01-03 00:43:19 +00002933 * data copying during routine operation. All information is returned
2934 * using pointer to packet information struct passed from the caller.
2935 * If the routine exhausts Rx ring resources then the resource error flag
2936 * is set.
2937 *
2938 * INPUT:
2939 * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
Wolfgang Denk53677ef2008-05-20 16:00:29 +02002940 * ETH_QUEUE rx_queue Number of Rx queue.
wdenk3a473b22004-01-03 00:43:19 +00002941 * PKT_INFO *p_pkt_info User packet buffer.
2942 *
2943 * OUTPUT:
2944 * Rx ring current and used indexes are updated.
2945 *
2946 * RETURN:
2947 * ETH_ERROR in case the routine can not access Rx desc ring.
2948 * ETH_QUEUE_FULL if Rx ring resources are exhausted.
2949 * ETH_END_OF_JOB if there is no received data.
2950 * ETH_OK otherwise.
2951 *
2952 *******************************************************************************/
2953static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
2954 ETH_QUEUE rx_queue,
2955 PKT_INFO * p_pkt_info)
2956{
2957 volatile ETH_RX_DESC *p_rx_curr_desc;
2958 volatile ETH_RX_DESC *p_rx_next_curr_desc;
2959 volatile ETH_RX_DESC *p_rx_used_desc;
2960 unsigned int command_status;
2961
2962 /* Do not process Rx ring in case of Rx ring resource error */
2963 if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) {
2964 printf ("\nRx Queue is full ...\n");
2965 return ETH_QUEUE_FULL;
2966 }
2967
2968 /* Get the Rx Desc ring 'curr and 'used' indexes */
2969 CURR_RFD_GET (p_rx_curr_desc, rx_queue);
2970 USED_RFD_GET (p_rx_used_desc, rx_queue);
2971
2972 /* Sanity check */
2973 if (p_rx_curr_desc == NULL)
2974 return ETH_ERROR;
2975
2976 /* The following parameters are used to save readings from memory */
2977 p_rx_next_curr_desc = RX_NEXT_DESC_PTR (p_rx_curr_desc, rx_queue);
2978 command_status = p_rx_curr_desc->cmd_sts;
2979
2980 /* Nothing to receive... */
2981 if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
Wolfgang Denk53677ef2008-05-20 16:00:29 +02002982/* DP(printf("Rx: command_status: %08x\n", command_status)); */
wdenk3a473b22004-01-03 00:43:19 +00002983 D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
2984/* DP(printf("\nETH_END_OF_JOB ...\n"));*/
2985 return ETH_END_OF_JOB;
2986 }
2987
2988 p_pkt_info->byte_cnt = (p_rx_curr_desc->byte_cnt) - RX_BUF_OFFSET;
2989 p_pkt_info->cmd_sts = command_status;
2990 p_pkt_info->buf_ptr = (p_rx_curr_desc->buf_ptr) + RX_BUF_OFFSET;
2991 p_pkt_info->return_info = p_rx_curr_desc->return_info;
2992 p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size; /* IP fragment indicator */
2993
2994 /* Clean the return info field to indicate that the packet has been */
2995 /* moved to the upper layers */
2996 p_rx_curr_desc->return_info = 0;
2997
2998 /* Update 'curr' in data structure */
2999 CURR_RFD_SET (p_rx_next_curr_desc, rx_queue);
3000
3001 /* Rx descriptors resource exhausted. Set the Rx ring resource error flag */
3002 if (p_rx_next_curr_desc == p_rx_used_desc)
3003 p_eth_port_ctrl->rx_resource_err[rx_queue] = true;
3004
3005 D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
3006 CPU_PIPE_FLUSH;
3007 return ETH_OK;
3008}
3009
3010/*******************************************************************************
3011 * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring.
3012 *
3013 * DESCRIPTION:
3014 * This routine returns a Rx buffer back to the Rx ring. It retrieves the
3015 * next 'used' descriptor and attached the returned buffer to it.
3016 * In case the Rx ring was in "resource error" condition, where there are
3017 * no available Rx resources, the function resets the resource error flag.
3018 *
3019 * INPUT:
3020 * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
Wolfgang Denk53677ef2008-05-20 16:00:29 +02003021 * ETH_QUEUE rx_queue Number of Rx queue.
wdenk3a473b22004-01-03 00:43:19 +00003022 * PKT_INFO *p_pkt_info Information on the returned buffer.
3023 *
3024 * OUTPUT:
3025 * New available Rx resource in Rx descriptor ring.
3026 *
3027 * RETURN:
3028 * ETH_ERROR in case the routine can not access Rx desc ring.
3029 * ETH_OK otherwise.
3030 *
3031 *******************************************************************************/
3032static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO *
3033 p_eth_port_ctrl,
3034 ETH_QUEUE rx_queue,
3035 PKT_INFO * p_pkt_info)
3036{
3037 volatile ETH_RX_DESC *p_used_rx_desc; /* Where to return Rx resource */
3038
3039 /* Get 'used' Rx descriptor */
3040 USED_RFD_GET (p_used_rx_desc, rx_queue);
3041
3042 /* Sanity check */
3043 if (p_used_rx_desc == NULL)
3044 return ETH_ERROR;
3045
3046 p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr;
3047 p_used_rx_desc->return_info = p_pkt_info->return_info;
3048 p_used_rx_desc->byte_cnt = p_pkt_info->byte_cnt;
3049 p_used_rx_desc->buf_size = MV64460_RX_BUFFER_SIZE; /* Reset Buffer size */
3050
3051 /* Flush the write pipe */
3052 CPU_PIPE_FLUSH;
3053
3054 /* Return the descriptor to DMA ownership */
3055 p_used_rx_desc->cmd_sts =
3056 ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
3057
3058 /* Flush descriptor and CPU pipe */
3059 D_CACHE_FLUSH_LINE ((unsigned int) p_used_rx_desc, 0);
3060 CPU_PIPE_FLUSH;
3061
3062 /* Move the used descriptor pointer to the next descriptor */
3063 USED_RFD_SET (RX_NEXT_DESC_PTR (p_used_rx_desc, rx_queue), rx_queue);
3064
3065 /* Any Rx return cancels the Rx resource error status */
3066 if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true)
3067 p_eth_port_ctrl->rx_resource_err[rx_queue] = false;
3068
3069 return ETH_OK;
3070}
3071
3072/*******************************************************************************
3073 * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path
3074 *
3075 * DESCRIPTION:
3076 * This routine sets the RX coalescing interrupt mechanism parameter.
3077 * This parameter is a timeout counter, that counts in 64 t_clk
3078 * chunks ; that when timeout event occurs a maskable interrupt
3079 * occurs.
3080 * The parameter is calculated using the tClk of the MV-643xx chip
3081 * , and the required delay of the interrupt in usec.
3082 *
3083 * INPUT:
3084 * ETH_PORT eth_port_num Ethernet port number
3085 * unsigned int t_clk t_clk of the MV-643xx chip in HZ units
3086 * unsigned int delay Delay in usec
3087 *
3088 * OUTPUT:
3089 * Interrupt coalescing mechanism value is set in MV-643xx chip.
3090 *
3091 * RETURN:
3092 * The interrupt coalescing value set in the gigE port.
3093 *
3094 *******************************************************************************/
3095#if 0 /* FIXME */
3096static unsigned int eth_port_set_rx_coal (ETH_PORT eth_port_num,
3097 unsigned int t_clk,
3098 unsigned int delay)
3099{
3100 unsigned int coal;
3101
3102 coal = ((t_clk / 1000000) * delay) / 64;
3103 /* Set RX Coalescing mechanism */
3104 MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num),
3105 ((coal & 0x3fff) << 8) |
3106 (MV_REG_READ
3107 (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num))
3108 & 0xffc000ff));
3109 return coal;
3110}
3111
3112#endif
3113/*******************************************************************************
3114 * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path
3115 *
3116 * DESCRIPTION:
3117 * This routine sets the TX coalescing interrupt mechanism parameter.
3118 * This parameter is a timeout counter, that counts in 64 t_clk
3119 * chunks ; that when timeout event occurs a maskable interrupt
3120 * occurs.
3121 * The parameter is calculated using the t_cLK frequency of the
3122 * MV-643xx chip and the required delay in the interrupt in uSec
3123 *
3124 * INPUT:
3125 * ETH_PORT eth_port_num Ethernet port number
3126 * unsigned int t_clk t_clk of the MV-643xx chip in HZ units
3127 * unsigned int delay Delay in uSeconds
3128 *
3129 * OUTPUT:
3130 * Interrupt coalescing mechanism value is set in MV-643xx chip.
3131 *
3132 * RETURN:
3133 * The interrupt coalescing value set in the gigE port.
3134 *
3135 *******************************************************************************/
3136#if 0 /* FIXME */
3137static unsigned int eth_port_set_tx_coal (ETH_PORT eth_port_num,
3138 unsigned int t_clk,
3139 unsigned int delay)
3140{
3141 unsigned int coal;
3142
3143 coal = ((t_clk / 1000000) * delay) / 64;
3144 /* Set TX Coalescing mechanism */
3145 MV_REG_WRITE (MV64460_ETH_TX_FIFO_URGENT_THRESHOLD_REG (eth_port_num),
3146 coal << 4);
3147 return coal;
3148}
3149#endif
3150
3151/*******************************************************************************
3152 * eth_b_copy - Copy bytes from source to destination
3153 *
3154 * DESCRIPTION:
3155 * This function supports the eight bytes limitation on Tx buffer size.
3156 * The routine will zero eight bytes starting from the destination address
3157 * followed by copying bytes from the source address to the destination.
3158 *
3159 * INPUT:
3160 * unsigned int src_addr 32 bit source address.
3161 * unsigned int dst_addr 32 bit destination address.
3162 * int byte_count Number of bytes to copy.
3163 *
3164 * OUTPUT:
3165 * See description.
3166 *
3167 * RETURN:
3168 * None.
3169 *
3170 *******************************************************************************/
3171static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
3172 int byte_count)
3173{
3174 /* Zero the dst_addr area */
3175 *(unsigned int *) dst_addr = 0x0;
3176
3177 while (byte_count != 0) {
3178 *(char *) dst_addr = *(char *) src_addr;
3179 dst_addr++;
3180 src_addr++;
3181 byte_count--;
3182 }
3183}