blob: 45085462fc8d66872e8b3e1f9f8f73a53da32f41 [file] [log] [blame]
wdenkc6097192002-11-03 00:24:07 +00001/*
2 * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
3 * Andreas Heppel <aheppel@sysgo.de>
4 *
5 * (C) Copyright 2002
6 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7 * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
8 *
9 * See file CREDITS for list of people who contributed to this
10 * project.
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of
15 * the License, or (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 * MA 02111-1307 USA
26 */
27
28/*
29 * PCI routines
30 */
31
32#include <common.h>
33
34#ifdef CONFIG_PCI
35
36#include <command.h>
wdenkc6097192002-11-03 00:24:07 +000037#include <asm/processor.h>
38#include <asm/io.h>
wdenkc6097192002-11-03 00:24:07 +000039#include <pci.h>
40
41#if (CONFIG_COMMANDS & CFG_CMD_PCI)
42
43extern int cmd_get_data_size(char* arg, int default_size);
44
45unsigned char ShortPCIListing = 1;
46
47/*
48 * Follows routines for the output of infos about devices on PCI bus.
49 */
50
51void pci_header_show(pci_dev_t dev);
52void pci_header_show_brief(pci_dev_t dev);
53
54/*
55 * Subroutine: pciinfo
56 *
57 * Description: Show information about devices on PCI bus.
58 * Depending on the define CFG_SHORT_PCI_LISTING
59 * the output will be more or less exhaustive.
60 *
61 * Inputs: bus_no the number of the bus to be scanned.
62 *
63 * Return: None
64 *
65 */
66void pciinfo(int BusNum, int ShortPCIListing)
67{
68 int Device;
69 int Function;
70 unsigned char HeaderType;
71 unsigned short VendorID;
72 pci_dev_t dev;
73
74 printf("Scanning PCI devices on bus %d\n", BusNum);
75
76 if (ShortPCIListing) {
77 printf("BusDevFun VendorId DeviceId Device Class Sub-Class\n");
78 printf("_____________________________________________________________\n");
79 }
80
81 for (Device = 0; Device < PCI_MAX_PCI_DEVICES; Device++) {
82 HeaderType = 0;
83 VendorID = 0;
84 for (Function = 0; Function < PCI_MAX_PCI_FUNCTIONS; Function++) {
85 /*
86 * If this is not a multi-function device, we skip the rest.
87 */
88 if (Function && !(HeaderType & 0x80))
89 break;
90
91 dev = PCI_BDF(BusNum, Device, Function);
92
93 pci_read_config_word(dev, PCI_VENDOR_ID, &VendorID);
94 if ((VendorID == 0xFFFF) || (VendorID == 0x0000))
95 continue;
96
wdenkc7de8292002-11-19 11:04:11 +000097 if (!Function) pci_read_config_byte(dev, PCI_HEADER_TYPE, &HeaderType);
wdenkc6097192002-11-03 00:24:07 +000098
99 if (ShortPCIListing)
100 {
101 printf("%02x.%02x.%02x ", BusNum, Device, Function);
102 pci_header_show_brief(dev);
103 }
104 else
105 {
106 printf("\nFound PCI device %02x.%02x.%02x:\n",
107 BusNum, Device, Function);
108 pci_header_show(dev);
109 }
110 }
111 }
112}
113
wdenk5d232d02003-05-22 22:52:13 +0000114static char *pci_classes_str(u8 class)
wdenkc6097192002-11-03 00:24:07 +0000115{
wdenk06d01db2003-03-14 20:47:52 +0000116 switch (class) {
wdenk8bde7f72003-06-27 21:31:46 +0000117 case PCI_CLASS_NOT_DEFINED:
118 return "Build before PCI Rev2.0";
119 break;
120 case PCI_BASE_CLASS_STORAGE:
121 return "Mass storage controller";
122 break;
123 case PCI_BASE_CLASS_NETWORK:
124 return "Network controller";
125 break;
126 case PCI_BASE_CLASS_DISPLAY:
127 return "Display controller";
128 break;
129 case PCI_BASE_CLASS_MULTIMEDIA:
130 return "Multimedia device";
131 break;
132 case PCI_BASE_CLASS_MEMORY:
133 return "Memory controller";
134 break;
135 case PCI_BASE_CLASS_BRIDGE:
136 return "Bridge device";
137 break;
138 case PCI_BASE_CLASS_COMMUNICATION:
139 return "Simple comm. controller";
140 break;
141 case PCI_BASE_CLASS_SYSTEM:
142 return "Base system peripheral";
143 break;
144 case PCI_BASE_CLASS_INPUT:
145 return "Input device";
146 break;
147 case PCI_BASE_CLASS_DOCKING:
148 return "Docking station";
149 break;
150 case PCI_BASE_CLASS_PROCESSOR:
151 return "Processor";
152 break;
153 case PCI_BASE_CLASS_SERIAL:
154 return "Serial bus controller";
155 break;
156 case PCI_BASE_CLASS_INTELLIGENT:
157 return "Intelligent controller";
158 break;
159 case PCI_BASE_CLASS_SATELLITE:
160 return "Satellite controller";
161 break;
162 case PCI_BASE_CLASS_CRYPT:
163 return "Cryptographic device";
164 break;
165 case PCI_BASE_CLASS_SIGNAL_PROCESSING:
166 return "DSP";
167 break;
168 case PCI_CLASS_OTHERS:
169 return "Does not fit any class";
170 break;
171 default:
wdenk5d232d02003-05-22 22:52:13 +0000172 return "???";
wdenk8bde7f72003-06-27 21:31:46 +0000173 break;
wdenk06d01db2003-03-14 20:47:52 +0000174 };
wdenkc6097192002-11-03 00:24:07 +0000175}
176
177/*
178 * Subroutine: pci_header_show_brief
179 *
180 * Description: Reads and prints the header of the
181 * specified PCI device in short form.
182 *
183 * Inputs: dev Bus+Device+Function number
184 *
185 * Return: None
186 *
187 */
188void pci_header_show_brief(pci_dev_t dev)
189{
190 u16 vendor, device;
191 u8 class, subclass;
192
193 pci_read_config_word(dev, PCI_VENDOR_ID, &vendor);
194 pci_read_config_word(dev, PCI_DEVICE_ID, &device);
195 pci_read_config_byte(dev, PCI_CLASS_CODE, &class);
196 pci_read_config_byte(dev, PCI_CLASS_SUB_CODE, &subclass);
197
wdenk5d232d02003-05-22 22:52:13 +0000198 printf("0x%.4x 0x%.4x %-23s 0x%.2x\n",
wdenkc6097192002-11-03 00:24:07 +0000199 vendor, device,
200 pci_classes_str(class), subclass);
201}
202
203/*
204 * Subroutine: PCI_Header_Show
205 *
206 * Description: Reads the header of the specified PCI device.
207 *
208 * Inputs: BusDevFunc Bus+Device+Function number
209 *
210 * Return: None
211 *
212 */
213void pci_header_show(pci_dev_t dev)
214{
215 u8 _byte, header_type;
216 u16 _word;
217 u32 _dword;
218
219#define PRINT(msg, type, reg) \
220 pci_read_config_##type(dev, reg, &_##type); \
221 printf(msg, _##type)
222
223#define PRINT2(msg, type, reg, func) \
224 pci_read_config_##type(dev, reg, &_##type); \
225 printf(msg, _##type, func(_##type))
226
227 pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
228
229 PRINT (" vendor ID = 0x%.4x\n", word, PCI_VENDOR_ID);
230 PRINT (" device ID = 0x%.4x\n", word, PCI_DEVICE_ID);
231 PRINT (" command register = 0x%.4x\n", word, PCI_COMMAND);
232 PRINT (" status register = 0x%.4x\n", word, PCI_STATUS);
233 PRINT (" revision ID = 0x%.2x\n", byte, PCI_REVISION_ID);
234 PRINT2(" class code = 0x%.2x (%s)\n", byte, PCI_CLASS_CODE,
wdenk8bde7f72003-06-27 21:31:46 +0000235 pci_classes_str);
wdenkc6097192002-11-03 00:24:07 +0000236 PRINT (" sub class code = 0x%.2x\n", byte, PCI_CLASS_SUB_CODE);
237 PRINT (" programming interface = 0x%.2x\n", byte, PCI_CLASS_PROG);
238 PRINT (" cache line = 0x%.2x\n", byte, PCI_CACHE_LINE_SIZE);
239 PRINT (" latency time = 0x%.2x\n", byte, PCI_LATENCY_TIMER);
240 PRINT (" header type = 0x%.2x\n", byte, PCI_HEADER_TYPE);
241 PRINT (" BIST = 0x%.2x\n", byte, PCI_BIST);
242 PRINT (" base address 0 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_0);
wdenkc6097192002-11-03 00:24:07 +0000243
wdenk7c7a23b2002-12-07 00:20:59 +0000244 switch (header_type & 0x03) {
245 case PCI_HEADER_TYPE_NORMAL: /* "normal" PCI device */
246 PRINT (" base address 1 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_1);
247 PRINT (" base address 2 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_2);
248 PRINT (" base address 3 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_3);
249 PRINT (" base address 4 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_4);
250 PRINT (" base address 5 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_5);
251 PRINT (" cardBus CIS pointer = 0x%.8x\n", dword, PCI_CARDBUS_CIS);
252 PRINT (" sub system vendor ID = 0x%.4x\n", word, PCI_SUBSYSTEM_VENDOR_ID);
253 PRINT (" sub system ID = 0x%.4x\n", word, PCI_SUBSYSTEM_ID);
254 PRINT (" expansion ROM base address = 0x%.8x\n", dword, PCI_ROM_ADDRESS);
255 PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE);
256 PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN);
257 PRINT (" min Grant = 0x%.2x\n", byte, PCI_MIN_GNT);
258 PRINT (" max Latency = 0x%.2x\n", byte, PCI_MAX_LAT);
259 break;
wdenk8bde7f72003-06-27 21:31:46 +0000260
wdenk7c7a23b2002-12-07 00:20:59 +0000261 case PCI_HEADER_TYPE_BRIDGE: /* PCI-to-PCI bridge */
262
263 PRINT (" base address 1 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_1);
wdenkc6097192002-11-03 00:24:07 +0000264 PRINT (" primary bus number = 0x%.2x\n", byte, PCI_PRIMARY_BUS);
265 PRINT (" secondary bus number = 0x%.2x\n", byte, PCI_SECONDARY_BUS);
266 PRINT (" subordinate bus number = 0x%.2x\n", byte, PCI_SUBORDINATE_BUS);
267 PRINT (" secondary latency timer = 0x%.2x\n", byte, PCI_SEC_LATENCY_TIMER);
268 PRINT (" IO base = 0x%.2x\n", byte, PCI_IO_BASE);
269 PRINT (" IO limit = 0x%.2x\n", byte, PCI_IO_LIMIT);
270 PRINT (" secondary status = 0x%.4x\n", word, PCI_SEC_STATUS);
271 PRINT (" memory base = 0x%.4x\n", word, PCI_MEMORY_BASE);
272 PRINT (" memory limit = 0x%.4x\n", word, PCI_MEMORY_LIMIT);
273 PRINT (" prefetch memory base = 0x%.4x\n", word, PCI_PREF_MEMORY_BASE);
274 PRINT (" prefetch memory limit = 0x%.4x\n", word, PCI_PREF_MEMORY_LIMIT);
275 PRINT (" prefetch memory base upper = 0x%.8x\n", dword, PCI_PREF_BASE_UPPER32);
276 PRINT (" prefetch memory limit upper = 0x%.8x\n", dword, PCI_PREF_LIMIT_UPPER32);
277 PRINT (" IO base upper 16 bits = 0x%.4x\n", word, PCI_IO_BASE_UPPER16);
278 PRINT (" IO limit upper 16 bits = 0x%.4x\n", word, PCI_IO_LIMIT_UPPER16);
279 PRINT (" expansion ROM base address = 0x%.8x\n", dword, PCI_ROM_ADDRESS1);
280 PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE);
281 PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN);
282 PRINT (" bridge control = 0x%.4x\n", word, PCI_BRIDGE_CONTROL);
wdenk7c7a23b2002-12-07 00:20:59 +0000283 break;
284
285 case PCI_HEADER_TYPE_CARDBUS: /* PCI-to-CardBus bridge */
286
287 PRINT (" capabilities = 0x%.2x\n", byte, PCI_CB_CAPABILITY_LIST);
288 PRINT (" secondary status = 0x%.4x\n", word, PCI_CB_SEC_STATUS);
289 PRINT (" primary bus number = 0x%.2x\n", byte, PCI_CB_PRIMARY_BUS);
290 PRINT (" CardBus number = 0x%.2x\n", byte, PCI_CB_CARD_BUS);
291 PRINT (" subordinate bus number = 0x%.2x\n", byte, PCI_CB_SUBORDINATE_BUS);
wdenk8bde7f72003-06-27 21:31:46 +0000292 PRINT (" CardBus latency timer = 0x%.2x\n", byte, PCI_CB_LATENCY_TIMER);
wdenk7c7a23b2002-12-07 00:20:59 +0000293 PRINT (" CardBus memory base 0 = 0x%.8x\n", dword, PCI_CB_MEMORY_BASE_0);
294 PRINT (" CardBus memory limit 0 = 0x%.8x\n", dword, PCI_CB_MEMORY_LIMIT_0);
295 PRINT (" CardBus memory base 1 = 0x%.8x\n", dword, PCI_CB_MEMORY_BASE_1);
296 PRINT (" CardBus memory limit 1 = 0x%.8x\n", dword, PCI_CB_MEMORY_LIMIT_1);
297 PRINT (" CardBus IO base 0 = 0x%.4x\n", word, PCI_CB_IO_BASE_0);
298 PRINT (" CardBus IO base high 0 = 0x%.4x\n", word, PCI_CB_IO_BASE_0_HI);
299 PRINT (" CardBus IO limit 0 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_0);
300 PRINT (" CardBus IO limit high 0 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_0_HI);
301 PRINT (" CardBus IO base 1 = 0x%.4x\n", word, PCI_CB_IO_BASE_1);
302 PRINT (" CardBus IO base high 1 = 0x%.4x\n", word, PCI_CB_IO_BASE_1_HI);
303 PRINT (" CardBus IO limit 1 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_1);
304 PRINT (" CardBus IO limit high 1 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_1_HI);
305 PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE);
306 PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN);
307 PRINT (" bridge control = 0x%.4x\n", word, PCI_CB_BRIDGE_CONTROL);
308 PRINT (" subvendor ID = 0x%.4x\n", word, PCI_CB_SUBSYSTEM_VENDOR_ID);
309 PRINT (" subdevice ID = 0x%.4x\n", word, PCI_CB_SUBSYSTEM_ID);
310 PRINT (" PC Card 16bit base address = 0x%.8x\n", dword, PCI_CB_LEGACY_MODE_BASE);
311 break;
wdenk8bde7f72003-06-27 21:31:46 +0000312
wdenk7c7a23b2002-12-07 00:20:59 +0000313 default:
314 printf("unknown header\n");
wdenk8bde7f72003-06-27 21:31:46 +0000315 break;
wdenkc6097192002-11-03 00:24:07 +0000316 }
317
318#undef PRINT
319#undef PRINT2
320}
321
322/* Convert the "bus.device.function" identifier into a number.
323 */
324static pci_dev_t get_pci_dev(char* name)
325{
326 char cnum[12];
327 int len, i, iold, n;
328 int bdfs[3] = {0,0,0};
329
330 len = strlen(name);
331 if (len > 8)
332 return -1;
333 for (i = 0, iold = 0, n = 0; i < len; i++) {
334 if (name[i] == '.') {
335 memcpy(cnum, &name[iold], i - iold);
336 cnum[i - iold] = '\0';
337 bdfs[n++] = simple_strtoul(cnum, NULL, 16);
338 iold = i + 1;
339 }
340 }
341 strcpy(cnum, &name[iold]);
342 if (n == 0)
343 n = 1;
344 bdfs[n] = simple_strtoul(cnum, NULL, 16);
345 return PCI_BDF(bdfs[0], bdfs[1], bdfs[2]);
346}
347
348static int pci_cfg_display(pci_dev_t bdf, ulong addr, ulong size, ulong length)
349{
350#define DISP_LINE_LEN 16
351 ulong i, nbytes, linebytes;
352 int rc = 0;
353
354 if (length == 0)
355 length = 0x40 / size; /* Standard PCI configuration space */
356
357 /* Print the lines.
358 * once, and all accesses are with the specified bus width.
359 */
360 nbytes = length * size;
361 do {
362 uint val4;
363 ushort val2;
364 u_char val1;
365
366 printf("%08lx:", addr);
367 linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes;
368 for (i=0; i<linebytes; i+= size) {
369 if (size == 4) {
370 pci_read_config_dword(bdf, addr, &val4);
371 printf(" %08x", val4);
372 } else if (size == 2) {
373 pci_read_config_word(bdf, addr, &val2);
374 printf(" %04x", val2);
375 } else {
376 pci_read_config_byte(bdf, addr, &val1);
377 printf(" %02x", val1);
378 }
379 addr += size;
380 }
381 printf("\n");
382 nbytes -= linebytes;
383 if (ctrlc()) {
384 rc = 1;
385 break;
386 }
387 } while (nbytes > 0);
388
389 return (rc);
390}
391
392static int pci_cfg_write (pci_dev_t bdf, ulong addr, ulong size, ulong value)
393{
394 if (size == 4) {
395 pci_write_config_dword(bdf, addr, value);
396 }
397 else if (size == 2) {
398 ushort val = value & 0xffff;
399 pci_write_config_word(bdf, addr, val);
400 }
401 else {
402 u_char val = value & 0xff;
403 pci_write_config_byte(bdf, addr, val);
404 }
405 return 0;
406}
407
408static int
409pci_cfg_modify (pci_dev_t bdf, ulong addr, ulong size, ulong value, int incrflag)
410{
411 ulong i;
412 int nbytes;
413 extern char console_buffer[];
414 uint val4;
415 ushort val2;
416 u_char val1;
417
418 /* Print the address, followed by value. Then accept input for
419 * the next value. A non-converted value exits.
420 */
421 do {
422 printf("%08lx:", addr);
423 if (size == 4) {
424 pci_read_config_dword(bdf, addr, &val4);
425 printf(" %08x", val4);
426 }
427 else if (size == 2) {
428 pci_read_config_word(bdf, addr, &val2);
429 printf(" %04x", val2);
430 }
431 else {
432 pci_read_config_byte(bdf, addr, &val1);
433 printf(" %02x", val1);
434 }
435
436 nbytes = readline (" ? ");
437 if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) {
438 /* <CR> pressed as only input, don't modify current
439 * location and move to next. "-" pressed will go back.
440 */
441 if (incrflag)
442 addr += nbytes ? -size : size;
443 nbytes = 1;
444#ifdef CONFIG_BOOT_RETRY_TIME
445 reset_cmd_timeout(); /* good enough to not time out */
446#endif
447 }
448#ifdef CONFIG_BOOT_RETRY_TIME
449 else if (nbytes == -2) {
450 break; /* timed out, exit the command */
451 }
452#endif
453 else {
454 char *endp;
455 i = simple_strtoul(console_buffer, &endp, 16);
456 nbytes = endp - console_buffer;
457 if (nbytes) {
458#ifdef CONFIG_BOOT_RETRY_TIME
459 /* good enough to not time out
460 */
461 reset_cmd_timeout();
462#endif
463 pci_cfg_write (bdf, addr, size, i);
464 if (incrflag)
465 addr += size;
466 }
467 }
468 } while (nbytes);
469
470 return 0;
471}
472
473/* PCI Configuration Space access commands
474 *
475 * Syntax:
476 * pci display[.b, .w, .l] bus.device.function} [addr] [len]
477 * pci next[.b, .w, .l] bus.device.function [addr]
478 * pci modify[.b, .w, .l] bus.device.function [addr]
479 * pci write[.b, .w, .l] bus.device.function addr value
480 */
481int do_pci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
482{
483 ulong addr = 0, value = 0, size = 0;
484 pci_dev_t bdf = 0;
485 char cmd = 's';
486
487 if (argc > 1)
488 cmd = argv[1][0];
489
490 switch (cmd) {
491 case 'd': /* display */
492 case 'n': /* next */
493 case 'm': /* modify */
494 case 'w': /* write */
495 /* Check for a size specification. */
496 size = cmd_get_data_size(argv[1], 4);
497 if (argc > 3)
498 addr = simple_strtoul(argv[3], NULL, 16);
499 if (argc > 4)
500 value = simple_strtoul(argv[4], NULL, 16);
501 case 'h': /* header */
502 if (argc < 3)
503 goto usage;
504 if ((bdf = get_pci_dev(argv[2])) == -1)
505 return 1;
506 break;
507 default: /* scan bus */
508 value = 1; /* short listing */
509 bdf = 0; /* bus number */
510 if (argc > 1) {
511 if (argv[argc-1][0] == 'l') {
512 value = 0;
513 argc--;
514 }
515 if (argc > 1)
516 bdf = simple_strtoul(argv[1], NULL, 16);
517 }
518 pciinfo(bdf, value);
519 return 0;
520 }
521
522 switch (argv[1][0]) {
523 case 'h': /* header */
524 pci_header_show(bdf);
525 return 0;
526 case 'd': /* display */
527 return pci_cfg_display(bdf, addr, size, value);
528 case 'n': /* next */
529 if (argc < 4)
530 goto usage;
531 return pci_cfg_modify(bdf, addr, size, value, 0);
532 case 'm': /* modify */
533 if (argc < 4)
534 goto usage;
535 return pci_cfg_modify(bdf, addr, size, value, 1);
536 case 'w': /* write */
537 if (argc < 5)
538 goto usage;
539 return pci_cfg_write(bdf, addr, size, value);
540 }
541
542 return 1;
543 usage:
544 printf ("Usage:\n%s\n", cmdtp->usage);
545 return 1;
546}
547
wdenk8bde7f72003-06-27 21:31:46 +0000548/***************************************************/
549
550
wdenk0d498392003-07-01 21:06:45 +0000551U_BOOT_CMD(
552 pci, 5, 1, do_pci,
wdenk256d31c2005-03-20 22:33:46 +0000553 "pci - list and access PCI Configuration Space\n",
wdenk8bde7f72003-06-27 21:31:46 +0000554 "[bus] [long]\n"
555 " - short or long list of PCI devices on bus 'bus'\n"
556 "pci header b.d.f\n"
557 " - show header of PCI device 'bus.device.function'\n"
558 "pci display[.b, .w, .l] b.d.f [address] [# of objects]\n"
559 " - display PCI configuration space (CFG)\n"
560 "pci next[.b, .w, .l] b.d.f address\n"
561 " - modify, read and keep CFG address\n"
562 "pci modify[.b, .w, .l] b.d.f address\n"
563 " - modify, auto increment CFG address\n"
564 "pci write[.b, .w, .l] b.d.f address value\n"
565 " - write to CFG address\n"
566);
567
wdenkc6097192002-11-03 00:24:07 +0000568#endif /* (CONFIG_COMMANDS & CFG_CMD_PCI) */
569
570#endif /* CONFIG_PCI */