blob: 8cce70c11b86ec903e25d33f573d1e6d35665087 [file] [log] [blame]
wdenke2211742002-11-02 23:30:20 +00001/*
2 * (C) Copyright 2002 ELTEC Elektronik AG
3 * Frank Gottschling <fgottschling@eltec.de>
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
wdenke2211742002-11-02 23:30:20 +000031#define GTREGREAD(x) 0xffffffff /* needed for debug */
32
33/*
34 * High Level Configuration Options
35 * (easy to change)
36 */
37
Wolfgang Denk2ae18242010-10-06 09:05:45 +020038#define CONFIG_SYS_TEXT_BASE 0xFFF00000
39
wdenke2211742002-11-02 23:30:20 +000040/* these hardware addresses are pretty bogus, please change them to
41 suit your needs */
42
43/* first ethernet */
44#define CONFIG_ETHADDR 00:00:5b:ee:de:ad
45
46#define CONFIG_IPADDR 192.168.0.105
47#define CONFIG_SERVERIP 192.168.0.100
48
49#define CONFIG_ELPPC 1 /* this is an BAB740/BAB750 board */
50
51#define CONFIG_BAUDRATE 9600 /* console baudrate */
52
53#undef CONFIG_WATCHDOG
54
55#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
56
57#define CONFIG_ZERO_BOOTDELAY_CHECK
58
59#undef CONFIG_BOOTARGS
60#define CONFIG_BOOTCOMMAND \
61 "bootp 1000000; " \
62 "setenv bootargs root=ramfs console=ttyS00,9600 " \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010063 "ip=${ipaddr}:${serverip}:${rootpath}:${gatewayip}:" \
64 "${netmask}:${hostname}:eth0:none; " \
wdenke2211742002-11-02 23:30:20 +000065 "bootm"
66
67#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020068#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
wdenke2211742002-11-02 23:30:20 +000069
Jon Loeliger5d2ebe12007-07-09 21:16:53 -050070/*
71 * BOOTP options
72 */
73#define CONFIG_BOOTP_SUBNETMASK
74#define CONFIG_BOOTP_GATEWAY
75#define CONFIG_BOOTP_HOSTNAME
76#define CONFIG_BOOTP_BOOTPATH
77
78#define CONFIG_BOOTP_BOOTFILESIZE
wdenke2211742002-11-02 23:30:20 +000079
wdenke2211742002-11-02 23:30:20 +000080
Jon Loeligerdcaa7152007-07-07 20:56:05 -050081/*
82 * Command line configuration.
83 */
84#include <config_cmd_default.h>
85
86#define CONFIG_CMD_PCI
87#define CONFIG_CMD_JFFS2
88
wdenke2211742002-11-02 23:30:20 +000089
90/*
91 * Miscellaneous configurable options
92 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020093#define CONFIG_SYS_LONGHELP /* undef to save memory */
94#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
wdenke2211742002-11-02 23:30:20 +000095
96/*
97 * choose between COM1 and COM2 as serial console
98 */
99#define CONFIG_CONS_INDEX 1
100
Jon Loeligerdcaa7152007-07-07 20:56:05 -0500101#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200102#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenke2211742002-11-02 23:30:20 +0000103#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200104#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenke2211742002-11-02 23:30:20 +0000105#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200106#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
107#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
108#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenke2211742002-11-02 23:30:20 +0000109
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200110#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
111#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 64 MB in DRAM */
wdenke2211742002-11-02 23:30:20 +0000112
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200113#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
wdenke2211742002-11-02 23:30:20 +0000114
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200115#define CONFIG_SYS_HZ 1000 /* dec. freq: 1 ms ticks */
wdenke2211742002-11-02 23:30:20 +0000116
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200117#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
wdenke2211742002-11-02 23:30:20 +0000118
119/*
120 * Low Level Configuration Settings
121 * (address mappings, register initial values, etc.)
122 * You should know what you are doing if you make changes here.
123 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200124#define CONFIG_SYS_BOARD_ASM_INIT
wdenke2211742002-11-02 23:30:20 +0000125#define CONFIG_MISC_INIT_R
126
127/*
128 * Address mapping scheme for the MPC107 mem controller is mapping B (CHRP)
129 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200130#undef CONFIG_SYS_ADDRESS_MAP_A
wdenke2211742002-11-02 23:30:20 +0000131
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200132#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
133#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
134#define CONFIG_SYS_PCI_MEMORY_SIZE 0x40000000
wdenke2211742002-11-02 23:30:20 +0000135
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200136#define CONFIG_SYS_PCI_MEM_BUS 0x80000000
137#define CONFIG_SYS_PCI_MEM_PHYS 0x80000000
138#define CONFIG_SYS_PCI_MEM_SIZE 0x7d000000
wdenke2211742002-11-02 23:30:20 +0000139
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200140#define CONFIG_SYS_ISA_MEM_BUS 0x00000000
141#define CONFIG_SYS_ISA_MEM_PHYS 0xfd000000
142#define CONFIG_SYS_ISA_MEM_SIZE 0x01000000
wdenke2211742002-11-02 23:30:20 +0000143
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200144#define CONFIG_SYS_PCI_IO_BUS 0x00800000
145#define CONFIG_SYS_PCI_IO_PHYS 0xfe800000
146#define CONFIG_SYS_PCI_IO_SIZE 0x00400000
wdenke2211742002-11-02 23:30:20 +0000147
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200148#define CONFIG_SYS_ISA_IO_BUS 0x00000000
149#define CONFIG_SYS_ISA_IO_PHYS 0xfe000000
150#define CONFIG_SYS_ISA_IO_SIZE 0x00800000
wdenke2211742002-11-02 23:30:20 +0000151
152/* driver defines FDC,IDE,... */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200153#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_PHYS
154#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_PHYS
155#define CONFIG_SYS_60X_PCI_IO_OFFSET CONFIG_SYS_ISA_IO_PHYS
wdenke2211742002-11-02 23:30:20 +0000156
157/*
158 * Start addresses for the final memory configuration
159 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200160 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenke2211742002-11-02 23:30:20 +0000161 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200162#define CONFIG_SYS_SDRAM_BASE 0x00000000
wdenke2211742002-11-02 23:30:20 +0000163
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200164#define CONFIG_SYS_USR_LED_BASE 0x78000000
165#define CONFIG_SYS_NVRAM_BASE 0xff000000
166#define CONFIG_SYS_UART_BASE 0xff400000
167#define CONFIG_SYS_FLASH_BASE 0xfff00000
wdenke2211742002-11-02 23:30:20 +0000168
169#define MPC107_EUMB_ADDR 0xfce00000
170#define MPC107_EUMB_PI 0xfce41090
171#define MPC107_EUMB_GCR 0xfce41020
172#define MPC107_EUMB_IACKR 0xfce600a0
173#define MPC107_I2C_ADDR 0xfce03000
174
175/*
176 * Definitions for initial stack pointer and data area
177 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200178#define CONFIG_SYS_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */
Wolfgang Denk553f0982010-10-26 13:32:32 +0200179#define CONFIG_SYS_INIT_RAM_SIZE 0x4000
Wolfgang Denk25ddd1f2010-10-26 14:34:52 +0200180#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200181#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
wdenke2211742002-11-02 23:30:20 +0000182
183/*
184 * Flash mapping/organization on the MPC10x.
185 */
186#define FLASH_BASE0_PRELIM 0xff800000
187#define FLASH_BASE1_PRELIM 0xffc00000
188
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200189#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
190#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
wdenke2211742002-11-02 23:30:20 +0000191
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200192#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
193#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
wdenke2211742002-11-02 23:30:20 +0000194
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200195/*
196 * JFFS2 partitions
197 *
198 */
199/* No command line, one static partition, whole device */
Stefan Roese68d7d652009-03-19 13:30:36 +0100200#undef CONFIG_CMD_MTDPARTS
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200201#define CONFIG_JFFS2_DEV "nor0"
202#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
203#define CONFIG_JFFS2_PART_OFFSET 0x00000000
204
205/* mtdparts command line support */
206/* Note: fake mtd_id used, no linux mtd map file */
207/*
Stefan Roese68d7d652009-03-19 13:30:36 +0100208#define CONFIG_CMD_MTDPARTS
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200209#define MTDIDS_DEFAULT "nor0=elppc-0,nor1=elppc-1"
210#define MTDPARTS_DEFAULT "mtdparts=elppc-0:-(jffs2),elppc-1:-(user)"
211*/
wdenke2211742002-11-02 23:30:20 +0000212
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200213#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
214#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */
215#define CONFIG_SYS_MALLOC_LEN 0x20000 /* Reserve 128 kB for malloc() */
216#undef CONFIG_SYS_MEMTEST
wdenke2211742002-11-02 23:30:20 +0000217
218/*
219 * Environment settings
220 */
221#define CONFIG_ENV_OVERWRITE
Jean-Christophe PLAGNIOL-VILLARD9314cee2008-09-10 22:47:59 +0200222#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200223#define CONFIG_SYS_NVRAM_SIZE 0x800 /* NVRAM size (2kB) */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200224#define CONFIG_ENV_SIZE 0x400 /* Size of Environment vars (1kB) */
225#define CONFIG_ENV_ADDR 0x0
226#define CONFIG_ENV_MAP_ADRS 0xff000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200227#define CONFIG_SYS_NV_SROM_COPY_ADDR (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
228#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE /* only byte accsess alowed */
229#define CONFIG_SYS_SROM_SIZE 0x100 /* shadow of revision info is in nvram */
wdenke2211742002-11-02 23:30:20 +0000230
231/*
232 * Serial devices
233 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200234#define CONFIG_SYS_NS16550
235#define CONFIG_SYS_NS16550_SERIAL
236#define CONFIG_SYS_NS16550_REG_SIZE 1
237#define CONFIG_SYS_NS16550_CLK 24000000
238#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_UART_BASE + 0)
239#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_UART_BASE + 8)
wdenke2211742002-11-02 23:30:20 +0000240
241/*
242 * PCI stuff
243 */
244#define CONFIG_PCI /* include pci support */
245#define CONFIG_PCI_PNP /* pci plug-and-play */
246#define CONFIG_PCI_HOST PCI_HOST_AUTO
247#undef CONFIG_PCI_SCAN_SHOW
248
249/*
250 * Optional Video console (graphic: SMI LynxEM)
251 */
252#define CONFIG_VIDEO
253#define CONFIG_CFB_CONSOLE
254#define VIDEO_KBD_INIT_FCT (simple_strtol (getenv("console"), NULL, 10))
255#define VIDEO_TSTC_FCT serial_tstc
256#define VIDEO_GETC_FCT serial_getc
257
258#define CONFIG_VIDEO_SMI_LYNXEM
259#define CONFIG_VIDEO_LOGO
260#define CONFIG_CONSOLE_EXTRA_INFO
261
262/*
263 * Initial BATs
264 */
265#if 1
266
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200267#define CONFIG_SYS_IBAT0L 0
268#define CONFIG_SYS_IBAT0U 0
269#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L
270#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U
wdenke2211742002-11-02 23:30:20 +0000271
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200272#define CONFIG_SYS_IBAT1L 0
273#define CONFIG_SYS_IBAT1U 0
274#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
275#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
wdenke2211742002-11-02 23:30:20 +0000276
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200277#define CONFIG_SYS_IBAT2L 0
278#define CONFIG_SYS_IBAT2U 0
279#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
280#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
wdenke2211742002-11-02 23:30:20 +0000281
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200282#define CONFIG_SYS_IBAT3L 0
283#define CONFIG_SYS_IBAT3U 0
284#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
285#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
wdenke2211742002-11-02 23:30:20 +0000286
287#else
288
289/* SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200290#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_RW)
291#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
292#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L
293#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U
wdenke2211742002-11-02 23:30:20 +0000294
295/* address range for flashes */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200296#define CONFIG_SYS_IBAT1L (CONFIG_SYS_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT)
297#define CONFIG_SYS_IBAT1U (CONFIG_SYS_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP)
298#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
299#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
wdenke2211742002-11-02 23:30:20 +0000300
301/* ISA IO space */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200302#define CONFIG_SYS_IBAT2L (CONFIG_SYS_ISA_IO | BATL_RW | BATL_CACHEINHIBIT)
303#define CONFIG_SYS_IBAT2U (CONFIG_SYS_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP)
304#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
305#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
wdenke2211742002-11-02 23:30:20 +0000306
307/* ISA memory space */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200308#define CONFIG_SYS_IBAT3L (CONFIG_SYS_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT)
309#define CONFIG_SYS_IBAT3U (CONFIG_SYS_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP)
310#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
311#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
wdenke2211742002-11-02 23:30:20 +0000312
313#endif
314
315/*
316 * Speed settings are board specific
317 */
Wolfgang Denkee80fa72010-06-13 18:38:23 +0200318#define CONFIG_SYS_BUS_CLK 100000000
319#define CONFIG_SYS_CPU_CLK 400000000
wdenke2211742002-11-02 23:30:20 +0000320
321/*
322 * For booting Linux, the board info and command line data
323 * have to be in the first 8 MB of memory, since this is
324 * the maximum mapped by the Linux kernel during initialization.
325 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200326#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenke2211742002-11-02 23:30:20 +0000327
328/*
329 * Cache Configuration
330 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200331#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
Jon Loeligerdcaa7152007-07-07 20:56:05 -0500332#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200333#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
wdenke2211742002-11-02 23:30:20 +0000334#endif
335
336/*
337 * L2CR setup -- make sure this is right for your board!
wdenk1d0350e2002-11-11 21:14:20 +0000338 * look in include/74xx_7xx.h for the defines used here
wdenke2211742002-11-02 23:30:20 +0000339 */
340
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200341#define CONFIG_SYS_L2
wdenke2211742002-11-02 23:30:20 +0000342
343#if 1
344#define L2_INIT 0 /* cpu 750 CXe*/
345#else
346#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
wdenk8bde7f72003-06-27 21:31:46 +0000347 L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
wdenke2211742002-11-02 23:30:20 +0000348#endif
349#define L2_ENABLE (L2_INIT | L2CR_L2E)
350
wdenke2211742002-11-02 23:30:20 +0000351#define CONFIG_NET_MULTI /* Multi ethernet cards support */
352#define CONFIG_EEPRO100
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200353#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
wdenke2211742002-11-02 23:30:20 +0000354#define CONFIG_EEPRO100_SROM_WRITE
355
356#endif /* __CONFIG_H */