blob: 0f44e6413461b34b0b22e8a3f622cdda1638fca5 [file] [log] [blame]
stroese071d8972003-05-23 11:35:47 +00001/*
stroesea20b27a2004-12-16 18:05:42 +00002 * (C) Copyright 2001-2004
stroese071d8972003-05-23 11:35:47 +00003 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
Matthias Fuchsc553b5f2009-02-15 22:26:54 +010015 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
stroese071d8972003-05-23 11:35:47 +000016 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
stroese071d8972003-05-23 11:35:47 +000024#ifndef __CONFIG_H
25#define __CONFIG_H
26
27/*
28 * High Level Configuration Options
stroese071d8972003-05-23 11:35:47 +000029 */
30
31#define CONFIG_405GP 1 /* This is a PPC405 CPU */
wdenkc837dcb2004-01-20 23:12:12 +000032#define CONFIG_4xx 1 /* ...member of PPC4xx family */
33#define CONFIG_PMC405 1 /* ...on a PMC405 board */
stroese071d8972003-05-23 11:35:47 +000034
Wolfgang Denk2ae18242010-10-06 09:05:45 +020035#define CONFIG_SYS_TEXT_BASE 0xFFF80000
36
wdenkc837dcb2004-01-20 23:12:12 +000037#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
38#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
stroese071d8972003-05-23 11:35:47 +000039
stroesea20b27a2004-12-16 18:05:42 +000040#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */
stroese071d8972003-05-23 11:35:47 +000041
42#define CONFIG_BAUDRATE 9600
43#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
44
Matthias Fuchs2f6eb912009-02-15 22:27:47 +010045/* Only interrupt boot if space is pressed. */
46#define CONFIG_AUTOBOOT_KEYED 1
47#define CONFIG_AUTOBOOT_PROMPT \
48 "Press SPACE to abort autoboot in %d seconds\n", bootdelay
49#undef CONFIG_AUTOBOOT_DELAY_STR
50#define CONFIG_AUTOBOOT_STOP_STR " "
51
Matthias Fuchsc553b5f2009-02-15 22:26:54 +010052#undef CONFIG_BOOTARGS
53#undef CONFIG_BOOTCOMMAND
stroesea20b27a2004-12-16 18:05:42 +000054
Matthias Fuchsc553b5f2009-02-15 22:26:54 +010055#define CONFIG_PREBOOT /* enable preboot variable */
stroese071d8972003-05-23 11:35:47 +000056
Matthias Fuchs2f6eb912009-02-15 22:27:47 +010057#define CFG_BOOTM_LEN 0x1000000 /* support booting of huge images */
58
stroese071d8972003-05-23 11:35:47 +000059#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Matthias Fuchsc553b5f2009-02-15 22:26:54 +010060#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
stroese071d8972003-05-23 11:35:47 +000061
Stefan Roese2076d0a2006-01-18 20:03:15 +010062#define CONFIG_NET_MULTI 1
63#undef CONFIG_HAS_ETH1
64
Ben Warren96e21f82008-10-27 23:50:15 -070065#define CONFIG_PPC4xx_EMAC
stroese071d8972003-05-23 11:35:47 +000066#define CONFIG_MII 1 /* MII PHY management */
wdenkc837dcb2004-01-20 23:12:12 +000067#define CONFIG_PHY_ADDR 0 /* PHY address */
Matthias Fuchsc553b5f2009-02-15 22:26:54 +010068#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
69#define CONFIG_RESET_PHY_R 1 /* use reset_phy() */
Jon Loeligeracf02692007-07-08 14:49:44 -050070
71/*
Jon Loeligera1aa0bb2007-07-10 09:22:23 -050072 * BOOTP options
73 */
74#define CONFIG_BOOTP_BOOTFILESIZE
75#define CONFIG_BOOTP_BOOTPATH
76#define CONFIG_BOOTP_GATEWAY
77#define CONFIG_BOOTP_HOSTNAME
78
Jon Loeligera1aa0bb2007-07-10 09:22:23 -050079/*
Jon Loeligeracf02692007-07-08 14:49:44 -050080 * Command line configuration.
81 */
82#include <config_cmd_default.h>
83
84#define CONFIG_CMD_BSP
85#define CONFIG_CMD_PCI
86#define CONFIG_CMD_IRQ
87#define CONFIG_CMD_ELF
88#define CONFIG_CMD_DATE
89#define CONFIG_CMD_JFFS2
90#define CONFIG_CMD_MII
91#define CONFIG_CMD_I2C
92#define CONFIG_CMD_PING
93#define CONFIG_CMD_UNIVERSE
94#define CONFIG_CMD_EEPROM
95
stroese071d8972003-05-23 11:35:47 +000096#define CONFIG_MAC_PARTITION
97#define CONFIG_DOS_PARTITION
98
Matthias Fuchsc553b5f2009-02-15 22:26:54 +010099#undef CONFIG_WATCHDOG /* watchdog disabled */
stroese071d8972003-05-23 11:35:47 +0000100
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100101#define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible */
102#define CONFIG_SYS_RTC_REG_BASE_ADDR 0xF0000500 /* RTC Base Address */
stroese071d8972003-05-23 11:35:47 +0000103
wdenkc837dcb2004-01-20 23:12:12 +0000104#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
stroese071d8972003-05-23 11:35:47 +0000105
106/*
107 * Miscellaneous configurable options
108 */
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100109#define CONFIG_SYS_LONGHELP /* undef to save memory */
110#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
stroese071d8972003-05-23 11:35:47 +0000111
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100112#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
113#ifdef CONFIG_SYS_HUSH_PARSER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200114#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
stroese071d8972003-05-23 11:35:47 +0000115#endif
116
Jon Loeligeracf02692007-07-08 14:49:44 -0500117#if defined(CONFIG_CMD_KGDB)
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100118#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
stroese071d8972003-05-23 11:35:47 +0000119#else
Matthias Fuchs2f6eb912009-02-15 22:27:47 +0100120#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
stroese071d8972003-05-23 11:35:47 +0000121#endif
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100122#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
123#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
124#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Sz */
stroese071d8972003-05-23 11:35:47 +0000125
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100126#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
stroese071d8972003-05-23 11:35:47 +0000127
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100128#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console info */
stroese071d8972003-05-23 11:35:47 +0000129
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100130#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
stroesea20b27a2004-12-16 18:05:42 +0000131
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100132#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
133#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
stroese071d8972003-05-23 11:35:47 +0000134
Stefan Roese550650d2010-09-20 16:05:31 +0200135#define CONFIG_CONS_INDEX 1 /* Use UART0 */
136#define CONFIG_SYS_NS16550
137#define CONFIG_SYS_NS16550_SERIAL
138#define CONFIG_SYS_NS16550_REG_SIZE 1
139#define CONFIG_SYS_NS16550_CLK get_serial_clock()
140
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100141#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock */
Matthias Fuchs2f6eb912009-02-15 22:27:47 +0100142#define CONFIG_SYS_BASE_BAUD 806400
stroese071d8972003-05-23 11:35:47 +0000143
144/* The following table includes the supported baudrates */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200145#define CONFIG_SYS_BAUDRATE_TABLE \
Matthias Fuchs2f6eb912009-02-15 22:27:47 +0100146 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
stroese071d8972003-05-23 11:35:47 +0000147
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200148#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100149#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
stroese071d8972003-05-23 11:35:47 +0000150
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100151#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
stroese071d8972003-05-23 11:35:47 +0000152
Matthias Fuchs2f6eb912009-02-15 22:27:47 +0100153#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100154#define CONFIG_LOOPW 1 /* enable loopw command */
stroesea20b27a2004-12-16 18:05:42 +0000155
stroese071d8972003-05-23 11:35:47 +0000156#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
157
wdenkc837dcb2004-01-20 23:12:12 +0000158#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
stroese53cf9432003-06-05 15:39:44 +0000159
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100160#define CONFIG_SYS_RX_ETH_BUFFER 16
stroese53cf9432003-06-05 15:39:44 +0000161
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100162/*
stroese071d8972003-05-23 11:35:47 +0000163 * PCI stuff
stroese071d8972003-05-23 11:35:47 +0000164 */
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100165#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
166#define PCI_HOST_FORCE 1 /* configure as pci host */
167#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
stroese071d8972003-05-23 11:35:47 +0000168
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100169#define CONFIG_PCI /* include pci support */
170#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
171#define CONFIG_PCI_PNP /* do pci plug-and-play */
172 /* resource configuration */
stroese071d8972003-05-23 11:35:47 +0000173
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100174#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
stroese071d8972003-05-23 11:35:47 +0000175
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100176#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config */
stroesea20b27a2004-12-16 18:05:42 +0000177
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100178#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
179#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH 0x0408 /* PCI Device ID */
180#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH 0x0409 /* PCI Device ID */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200181#define CONFIG_SYS_PCI_SUBSYS_DEVICEID pmc405_pci_subsys_deviceid()
Stefan Roese2076d0a2006-01-18 20:03:15 +0100182
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100183#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* Processor/PPC */
Stefan Roese2076d0a2006-01-18 20:03:15 +0100184
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100185#define CONFIG_SYS_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */
186#define CONFIG_SYS_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable */
187#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
188#define CONFIG_SYS_PCI_PTM2LA 0xef000000 /* point to internal regs */
189#define CONFIG_SYS_PCI_PTM2MS 0xff000001 /* 16MB, enable */
190#define CONFIG_SYS_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */
191
Matthias Fuchs82379b52009-09-07 17:00:41 +0200192#define CONFIG_PCI_4xx_PTM_OVERWRITE 1 /* overwrite PTMx settings by env */
193
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100194/*
stroese071d8972003-05-23 11:35:47 +0000195 * Start addresses for the final memory configuration
196 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200197 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
stroese071d8972003-05-23 11:35:47 +0000198 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200199#define CONFIG_SYS_SDRAM_BASE 0x00000000
Wolfgang Denk14d0a022010-10-07 21:51:12 +0200200#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
201#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1)
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100202#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* 128 kB for malloc() */
stroese071d8972003-05-23 11:35:47 +0000203
Matthias Fuchs2f6eb912009-02-15 22:27:47 +0100204#define CONFIG_PRAM 0 /* use pram variable to overwrite */
205
stroese071d8972003-05-23 11:35:47 +0000206/*
207 * For booting Linux, the board info and command line data
208 * have to be in the first 8 MB of memory, since this is
209 * the maximum mapped by the Linux kernel during initialization.
210 */
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100211#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
stroese071d8972003-05-23 11:35:47 +0000212
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100213/*
stroese071d8972003-05-23 11:35:47 +0000214 * FLASH organization
215 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200216#define CONFIG_SYS_FLASH_BASE 0xFE000000
217#define CONFIG_SYS_FLASH_INCREMENT 0x01000000
stroese071d8972003-05-23 11:35:47 +0000218
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100219#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
220#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
221#define CONFIG_SYS_FLASH_PROTECTION 1 /* don't use hardware protection */
Matthias Fuchs2f6eb912009-02-15 22:27:47 +0100222#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100223#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (faster) */
224#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */
225#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, \
226 CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_INCREMENT}
227#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
228#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on fli */
stroese071d8972003-05-23 11:35:47 +0000229
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200230/*
stroese071d8972003-05-23 11:35:47 +0000231 * Environment Variable setup
232 */
Jean-Christophe PLAGNIOL-VILLARDbb1f8b42008-09-05 09:19:30 +0200233#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
stroese071d8972003-05-23 11:35:47 +0000234
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100235/* environment starts at the beginning of the EEPROM */
236#define CONFIG_ENV_OFFSET 0x000
237#define CONFIG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars */
stroese071d8972003-05-23 11:35:47 +0000238
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100239#define CONFIG_SYS_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */
240#define CONFIG_SYS_NVRAM_SIZE 242 /* NVRAM size */
241
242/*
stroese071d8972003-05-23 11:35:47 +0000243 * I2C EEPROM (CAT24WC16) for environment
244 */
245#define CONFIG_HARD_I2C /* I2c with hardware support */
Stefan Roesed0b0dca2010-04-01 14:37:24 +0200246#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
Matthias Fuchs2f6eb912009-02-15 22:27:47 +0100247#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200248#define CONFIG_SYS_I2C_SLAVE 0x7F
stroese071d8972003-05-23 11:35:47 +0000249
Matthias Fuchs2f6eb912009-02-15 22:27:47 +0100250#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24W16 */
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100251#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
252/* mask of address bits that overflow into the "EEPROM chip address" */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200253#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
Matthias Fuchs2f6eb912009-02-15 22:27:47 +0100254#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24W16 has */
255 /* 16 byte page write mode using*/
256 /* last 4 bits of the address */
257
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100258#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
stroese071d8972003-05-23 11:35:47 +0000259
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100260/*
stroese071d8972003-05-23 11:35:47 +0000261 * External Bus Controller (EBC) Setup
262 */
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100263#define FLASH0_BA 0xFF000000 /* FLASH 0 Base Address */
264#define FLASH1_BA 0xFE000000 /* FLASH 1 Base Address */
265#define CAN_BA 0xF0000000 /* CAN Base Addres */
266#define RTC_BA 0xF0000500 /* RTC Base Address */
267#define NVRAM_BA 0xF0200000 /* NVRAM Base Address */
stroese071d8972003-05-23 11:35:47 +0000268
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100269/* Memory Bank 0 (Flash Bank 0) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200270#define CONFIG_SYS_EBC_PB0AP 0x92015480
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100271/* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit */
272#define CONFIG_SYS_EBC_PB0CR (FLASH0_BA | 0x9A000)
stroese071d8972003-05-23 11:35:47 +0000273
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100274/* Memory Bank 1 (Flash Bank 1) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200275#define CONFIG_SYS_EBC_PB1AP 0x92015480
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100276/* BAS=0xFE0,BS=16MB,BU=R/W,BW=16bit*/
277#define CONFIG_SYS_EBC_PB1CR (FLASH1_BA | 0x9A000)
stroese071d8972003-05-23 11:35:47 +0000278
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100279/* Memory Bank 2 (CAN0, 1, RTC) initialization */
280/* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */
281#define CONFIG_SYS_EBC_PB2AP 0x03000440
282/* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
283#define CONFIG_SYS_EBC_PB2CR (CAN_BA | 0x18000)
stroese071d8972003-05-23 11:35:47 +0000284
Stefan Roese2076d0a2006-01-18 20:03:15 +0100285/* Memory Bank 3 -> unused */
286
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100287/* Memory Bank 4 (NVRAM) initialization */
288/* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */
289#define CONFIG_SYS_EBC_PB4AP 0x03000440
290/* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
291#define CONFIG_SYS_EBC_PB4CR (NVRAM_BA | 0x18000)
stroese071d8972003-05-23 11:35:47 +0000292
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100293/*
stroese2853d292003-09-12 08:53:54 +0000294 * FPGA stuff
295 */
stroese2853d292003-09-12 08:53:54 +0000296/* FPGA program pin configuration */
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100297#define CONFIG_SYS_FPGA_PRG 0x04000000 /* JTAG TMS pin (output) */
298#define CONFIG_SYS_FPGA_CLK 0x02000000 /* JTAG TCK pin (output) */
299#define CONFIG_SYS_FPGA_DATA 0x01000000 /* JTAG TDO pin (output) */
300#define CONFIG_SYS_FPGA_INIT 0x00010000 /* unused (ppc input) */
301#define CONFIG_SYS_FPGA_DONE 0x00008000 /* JTAG TDI pin (input) */
stroese2853d292003-09-12 08:53:54 +0000302
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100303/* pass Ethernet MAC to VxWorks */
304#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000
stroesea20b27a2004-12-16 18:05:42 +0000305
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100306/*
Stefan Roese2076d0a2006-01-18 20:03:15 +0100307 * GPIOs
308 */
Matthias Fuchs2f6eb912009-02-15 22:27:47 +0100309#define CONFIG_SYS_VPEN (0x80000000 >> 3) /* GPIO3 */
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100310#define CONFIG_SYS_NONMONARCH (0x80000000 >> 14) /* GPIO14 */
311#define CONFIG_SYS_XEREADY (0x80000000 >> 15) /* GPIO15 */
312#define CONFIG_SYS_INTA_FAKE (0x80000000 >> 19) /* GPIO19 */
313#define CONFIG_SYS_SELF_RST (0x80000000 >> 21) /* GPIO21 */
314#define CONFIG_SYS_REV1_2 (0x80000000 >> 23) /* GPIO23 */
Stefan Roese2076d0a2006-01-18 20:03:15 +0100315
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100316/*
stroese071d8972003-05-23 11:35:47 +0000317 * Definitions for initial stack pointer and data area (in data cache)
318 */
319
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100320/* use on chip memory (OCM) for temperary stack until sdram is tested */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200321#define CONFIG_SYS_TEMP_STACK_OCM 1
stroese071d8972003-05-23 11:35:47 +0000322
323/* On Chip Memory location */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200324#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
325#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
stroese071d8972003-05-23 11:35:47 +0000326
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100327/* inside of SDRAM */
328#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR
329
330/* End of used area in RAM */
Wolfgang Denk553f0982010-10-26 13:32:32 +0200331#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100332
Wolfgang Denk553f0982010-10-26 13:32:32 +0200333#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
Wolfgang Denk25ddd1f2010-10-26 14:34:52 +0200334 GENERATED_GBL_DATA_SIZE)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200335#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
stroese071d8972003-05-23 11:35:47 +0000336
Matthias Fuchs2f6eb912009-02-15 22:27:47 +0100337#define CONFIG_OF_LIBFDT
338#define CONFIG_OF_BOARD_SETUP
339
Matthias Fuchsc553b5f2009-02-15 22:26:54 +0100340#endif /* __CONFIG_H */