blob: 65cba1050802586aeec186a351ba7304006c8a73 [file] [log] [blame]
Jagan Tekib0174c32017-05-30 17:41:14 +00001/*
2 * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43#include "sun8i-h3-nanopi.dtsi"
44
45/ {
46 model = "FriendlyArm NanoPi M1 Plus";
47 compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3";
Andre Przywara2d0c3d62018-07-04 14:16:38 +010048
49 aliases {
50 serial1 = &uart3;
51 ethernet0 = &emac;
52 ethernet1 = &sdio_wifi;
53 };
54
55 reg_gmac_3v3: gmac-3v3 {
56 compatible = "regulator-fixed";
57 regulator-name = "gmac-3v3";
58 regulator-min-microvolt = <3300000>;
59 regulator-max-microvolt = <3300000>;
60 startup-delay-us = <100000>;
61 enable-active-high;
62 gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
63 };
64
65 wifi_pwrseq: wifi_pwrseq {
66 compatible = "mmc-pwrseq-simple";
67 pinctrl-names = "default";
68 reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
69 };
Jagan Tekib0174c32017-05-30 17:41:14 +000070};
71
72&ehci1 {
73 status = "okay";
74};
75
76&ehci2 {
77 status = "okay";
78};
79
Andre Przywara2d0c3d62018-07-04 14:16:38 +010080&emac {
81 pinctrl-names = "default";
82 pinctrl-0 = <&emac_rgmii_pins>;
83 phy-supply = <&reg_gmac_3v3>;
84 phy-handle = <&ext_rgmii_phy>;
85 phy-mode = "rgmii";
86
87 status = "okay";
88};
89
90&external_mdio {
91 ext_rgmii_phy: ethernet-phy@1 {
92 compatible = "ethernet-phy-ieee802.3-c22";
93 reg = <7>;
94 };
95};
96
97&ir {
98 pinctrl-names = "default";
99 pinctrl-0 = <&ir_pins_a>;
100 status = "okay";
101};
102
103&mmc1 {
104 vmmc-supply = <&reg_vcc3v3>;
105 vqmmc-supply = <&reg_vcc3v3>;
106 mmc-pwrseq = <&wifi_pwrseq>;
107 bus-width = <4>;
108 non-removable;
109 status = "okay";
110
111 sdio_wifi: sdio_wifi@1 {
112 reg = <1>;
113 compatible = "brcm,bcm4329-fmac";
114 interrupt-parent = <&pio>;
115 interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
116 interrupt-names = "host-wake";
117 };
118};
119
120&mmc2 {
121 pinctrl-names = "default";
122 pinctrl-0 = <&mmc2_8bit_pins>;
123 vmmc-supply = <&reg_vcc3v3>;
124 vqmmc-supply = <&reg_vcc3v3>;
125 bus-width = <8>;
126 non-removable;
127 status = "okay";
128};
129
Jagan Tekib0174c32017-05-30 17:41:14 +0000130&ohci1 {
131 status = "okay";
132};
133
134&ohci2 {
135 status = "okay";
136};
Andre Przywara2d0c3d62018-07-04 14:16:38 +0100137
138&uart3 {
139 pinctrl-names = "default";
140 pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
141 status = "okay";
142};