Purna Chandra Mandal | 5c99045 | 2016-03-18 18:36:08 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2015 |
| 3 | * Cristian Birsan <cristian.birsan@microchip.com> |
| 4 | * Purna Chandra Mandal <purna.mandal@microchip.com> |
| 5 | * |
| 6 | * SPDX-License-Identifier: GPL-2.0+ |
| 7 | */ |
| 8 | |
| 9 | #include <common.h> |
| 10 | #include <dm.h> |
| 11 | #include <fdt_support.h> |
| 12 | #include <flash.h> |
| 13 | #include <mach/pic32.h> |
| 14 | #include <wait_bit.h> |
| 15 | |
| 16 | DECLARE_GLOBAL_DATA_PTR; |
| 17 | |
| 18 | /* NVM Controller registers */ |
| 19 | struct pic32_reg_nvm { |
| 20 | struct pic32_reg_atomic ctrl; |
| 21 | struct pic32_reg_atomic key; |
| 22 | struct pic32_reg_atomic addr; |
| 23 | struct pic32_reg_atomic data; |
| 24 | }; |
| 25 | |
| 26 | /* NVM operations */ |
| 27 | #define NVMOP_NOP 0 |
| 28 | #define NVMOP_WORD_WRITE 1 |
| 29 | #define NVMOP_PAGE_ERASE 4 |
| 30 | |
| 31 | /* NVM control bits */ |
| 32 | #define NVM_WR BIT(15) |
| 33 | #define NVM_WREN BIT(14) |
| 34 | #define NVM_WRERR BIT(13) |
| 35 | #define NVM_LVDERR BIT(12) |
| 36 | |
| 37 | /* NVM programming unlock register */ |
| 38 | #define LOCK_KEY 0x0 |
| 39 | #define UNLOCK_KEY1 0xaa996655 |
| 40 | #define UNLOCK_KEY2 0x556699aa |
| 41 | |
| 42 | /* |
| 43 | * PIC32 flash banks consist of number of pages, each page |
| 44 | * into number of rows and rows into number of words. |
| 45 | * Here we will maintain page information instead of sector. |
| 46 | */ |
| 47 | flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; |
| 48 | static struct pic32_reg_nvm *nvm_regs_p; |
| 49 | |
| 50 | static inline void flash_initiate_operation(u32 nvmop) |
| 51 | { |
| 52 | /* set operation */ |
| 53 | writel(nvmop, &nvm_regs_p->ctrl.raw); |
| 54 | |
| 55 | /* enable flash write */ |
| 56 | writel(NVM_WREN, &nvm_regs_p->ctrl.set); |
| 57 | |
| 58 | /* unlock sequence */ |
| 59 | writel(LOCK_KEY, &nvm_regs_p->key.raw); |
| 60 | writel(UNLOCK_KEY1, &nvm_regs_p->key.raw); |
| 61 | writel(UNLOCK_KEY2, &nvm_regs_p->key.raw); |
| 62 | |
| 63 | /* initiate operation */ |
| 64 | writel(NVM_WR, &nvm_regs_p->ctrl.set); |
| 65 | } |
| 66 | |
| 67 | static int flash_wait_till_busy(const char *func, ulong timeout) |
| 68 | { |
| 69 | int ret = wait_for_bit(__func__, &nvm_regs_p->ctrl.raw, |
| 70 | NVM_WR, false, timeout, false); |
| 71 | |
| 72 | return ret ? ERR_TIMOUT : ERR_OK; |
| 73 | } |
| 74 | |
| 75 | static inline int flash_complete_operation(void) |
| 76 | { |
| 77 | u32 tmp; |
| 78 | |
| 79 | tmp = readl(&nvm_regs_p->ctrl.raw); |
| 80 | if (tmp & NVM_WRERR) { |
| 81 | printf("Error in Block Erase - Lock Bit may be set!\n"); |
| 82 | flash_initiate_operation(NVMOP_NOP); |
| 83 | return ERR_PROTECTED; |
| 84 | } |
| 85 | |
| 86 | if (tmp & NVM_LVDERR) { |
| 87 | printf("Error in Block Erase - low-vol detected!\n"); |
| 88 | flash_initiate_operation(NVMOP_NOP); |
| 89 | return ERR_NOT_ERASED; |
| 90 | } |
| 91 | |
| 92 | /* disable flash write or erase operation */ |
| 93 | writel(NVM_WREN, &nvm_regs_p->ctrl.clr); |
| 94 | |
| 95 | return ERR_OK; |
| 96 | } |
| 97 | |
| 98 | /* |
| 99 | * Erase flash sectors, returns: |
| 100 | * ERR_OK - OK |
| 101 | * ERR_INVAL - invalid sector arguments |
| 102 | * ERR_TIMOUT - write timeout |
| 103 | * ERR_NOT_ERASED - Flash not erased |
| 104 | * ERR_UNKNOWN_FLASH_VENDOR - incorrect flash |
| 105 | */ |
| 106 | int flash_erase(flash_info_t *info, int s_first, int s_last) |
| 107 | { |
| 108 | ulong sect_start, sect_end, flags; |
| 109 | int prot, sect; |
| 110 | int rc; |
| 111 | |
| 112 | if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_MCHP) { |
| 113 | printf("Can't erase unknown flash type %08lx - aborted\n", |
| 114 | info->flash_id); |
| 115 | return ERR_UNKNOWN_FLASH_VENDOR; |
| 116 | } |
| 117 | |
| 118 | if ((s_first < 0) || (s_first > s_last)) { |
| 119 | printf("- no sectors to erase\n"); |
| 120 | return ERR_INVAL; |
| 121 | } |
| 122 | |
| 123 | prot = 0; |
| 124 | for (sect = s_first; sect <= s_last; ++sect) { |
| 125 | if (info->protect[sect]) |
| 126 | prot++; |
| 127 | } |
| 128 | |
| 129 | if (prot) |
| 130 | printf("- Warning: %d protected sectors will not be erased!\n", |
| 131 | prot); |
| 132 | else |
| 133 | printf("\n"); |
| 134 | |
| 135 | /* erase on unprotected sectors */ |
| 136 | for (sect = s_first; sect <= s_last; sect++) { |
| 137 | if (info->protect[sect]) |
| 138 | continue; |
| 139 | |
| 140 | /* disable interrupts */ |
| 141 | flags = disable_interrupts(); |
| 142 | |
| 143 | /* write destination page address (physical) */ |
| 144 | sect_start = CPHYSADDR(info->start[sect]); |
| 145 | writel(sect_start, &nvm_regs_p->addr.raw); |
| 146 | |
| 147 | /* page erase */ |
| 148 | flash_initiate_operation(NVMOP_PAGE_ERASE); |
| 149 | |
| 150 | /* wait */ |
| 151 | rc = flash_wait_till_busy(__func__, |
| 152 | CONFIG_SYS_FLASH_ERASE_TOUT); |
| 153 | |
| 154 | /* re-enable interrupts if necessary */ |
| 155 | if (flags) |
| 156 | enable_interrupts(); |
| 157 | |
| 158 | if (rc != ERR_OK) |
| 159 | return rc; |
| 160 | |
| 161 | rc = flash_complete_operation(); |
| 162 | if (rc != ERR_OK) |
| 163 | return rc; |
| 164 | |
| 165 | /* |
| 166 | * flash content is updated but cache might contain stale |
| 167 | * data, so invalidate dcache. |
| 168 | */ |
| 169 | sect_end = info->start[sect] + info->size / info->sector_count; |
| 170 | invalidate_dcache_range(info->start[sect], sect_end); |
| 171 | } |
| 172 | |
| 173 | printf(" done\n"); |
| 174 | return ERR_OK; |
| 175 | } |
| 176 | |
| 177 | int page_erase(flash_info_t *info, int sect) |
| 178 | { |
| 179 | return 0; |
| 180 | } |
| 181 | |
| 182 | /* Write a word to flash */ |
| 183 | static int write_word(flash_info_t *info, ulong dest, ulong word) |
| 184 | { |
| 185 | ulong flags; |
| 186 | int rc; |
| 187 | |
| 188 | /* read flash to check if it is sufficiently erased */ |
| 189 | if ((readl((void __iomem *)dest) & word) != word) { |
| 190 | printf("Error, Flash not erased!\n"); |
| 191 | return ERR_NOT_ERASED; |
| 192 | } |
| 193 | |
| 194 | /* disable interrupts */ |
| 195 | flags = disable_interrupts(); |
| 196 | |
| 197 | /* update destination page address (physical) */ |
| 198 | writel(CPHYSADDR(dest), &nvm_regs_p->addr.raw); |
| 199 | writel(word, &nvm_regs_p->data.raw); |
| 200 | |
| 201 | /* word write */ |
| 202 | flash_initiate_operation(NVMOP_WORD_WRITE); |
| 203 | |
| 204 | /* wait for operation to complete */ |
| 205 | rc = flash_wait_till_busy(__func__, CONFIG_SYS_FLASH_WRITE_TOUT); |
| 206 | |
| 207 | /* re-enable interrupts if necessary */ |
| 208 | if (flags) |
| 209 | enable_interrupts(); |
| 210 | |
| 211 | if (rc != ERR_OK) |
| 212 | return rc; |
| 213 | |
| 214 | return flash_complete_operation(); |
| 215 | } |
| 216 | |
| 217 | /* |
| 218 | * Copy memory to flash, returns: |
| 219 | * ERR_OK - OK |
| 220 | * ERR_TIMOUT - write timeout |
| 221 | * ERR_NOT_ERASED - Flash not erased |
| 222 | */ |
| 223 | int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) |
| 224 | { |
| 225 | ulong dst, tmp_le, len = cnt; |
| 226 | int i, l, rc; |
| 227 | uchar *cp; |
| 228 | |
| 229 | /* get lower word aligned address */ |
| 230 | dst = (addr & ~3); |
| 231 | |
| 232 | /* handle unaligned start bytes */ |
| 233 | l = addr - dst; |
| 234 | if (l != 0) { |
| 235 | tmp_le = 0; |
| 236 | for (i = 0, cp = (uchar *)dst; i < l; ++i, ++cp) |
| 237 | tmp_le |= *cp << (i * 8); |
| 238 | |
| 239 | for (; (i < 4) && (cnt > 0); ++i, ++src, --cnt, ++cp) |
| 240 | tmp_le |= *src << (i * 8); |
| 241 | |
| 242 | for (; (cnt == 0) && (i < 4); ++i, ++cp) |
| 243 | tmp_le |= *cp << (i * 8); |
| 244 | |
| 245 | rc = write_word(info, dst, tmp_le); |
| 246 | if (rc) |
| 247 | goto out; |
| 248 | |
| 249 | dst += 4; |
| 250 | } |
| 251 | |
| 252 | /* handle word aligned part */ |
| 253 | while (cnt >= 4) { |
| 254 | tmp_le = src[0] | src[1] << 8 | src[2] << 16 | src[3] << 24; |
| 255 | rc = write_word(info, dst, tmp_le); |
| 256 | if (rc) |
| 257 | goto out; |
| 258 | src += 4; |
| 259 | dst += 4; |
| 260 | cnt -= 4; |
| 261 | } |
| 262 | |
| 263 | if (cnt == 0) { |
| 264 | rc = ERR_OK; |
| 265 | goto out; |
| 266 | } |
| 267 | |
| 268 | /* handle unaligned tail bytes */ |
| 269 | tmp_le = 0; |
| 270 | for (i = 0, cp = (uchar *)dst; (i < 4) && (cnt > 0); ++i, ++cp) { |
| 271 | tmp_le |= *src++ << (i * 8); |
| 272 | --cnt; |
| 273 | } |
| 274 | |
| 275 | for (; i < 4; ++i, ++cp) |
| 276 | tmp_le |= *cp << (i * 8); |
| 277 | |
| 278 | rc = write_word(info, dst, tmp_le); |
| 279 | out: |
| 280 | /* |
| 281 | * flash content updated by nvm controller but CPU cache might |
| 282 | * have stale data, so invalidate dcache. |
| 283 | */ |
| 284 | invalidate_dcache_range(addr, addr + len); |
| 285 | |
| 286 | printf(" done\n"); |
| 287 | return rc; |
| 288 | } |
| 289 | |
| 290 | void flash_print_info(flash_info_t *info) |
| 291 | { |
| 292 | int i; |
| 293 | |
| 294 | if (info->flash_id == FLASH_UNKNOWN) { |
| 295 | printf("missing or unknown FLASH type\n"); |
| 296 | return; |
| 297 | } |
| 298 | |
| 299 | switch (info->flash_id & FLASH_VENDMASK) { |
| 300 | case FLASH_MAN_MCHP: |
| 301 | printf("Microchip Technology "); |
| 302 | break; |
| 303 | default: |
| 304 | printf("Unknown Vendor "); |
| 305 | break; |
| 306 | } |
| 307 | |
| 308 | switch (info->flash_id & FLASH_TYPEMASK) { |
| 309 | case FLASH_MCHP100T: |
| 310 | printf("Internal (8 Mbit, 64 x 16k)\n"); |
| 311 | break; |
| 312 | default: |
| 313 | printf("Unknown Chip Type\n"); |
| 314 | break; |
| 315 | } |
| 316 | |
| 317 | printf(" Size: %ld MB in %d Sectors\n", |
| 318 | info->size >> 20, info->sector_count); |
| 319 | |
| 320 | printf(" Sector Start Addresses:"); |
| 321 | for (i = 0; i < info->sector_count; ++i) { |
| 322 | if ((i % 5) == 0) |
| 323 | printf("\n "); |
| 324 | |
| 325 | printf(" %08lX%s", info->start[i], |
| 326 | info->protect[i] ? " (RO)" : " "); |
| 327 | } |
| 328 | printf("\n"); |
| 329 | } |
| 330 | |
| 331 | unsigned long flash_init(void) |
| 332 | { |
| 333 | unsigned long size = 0; |
| 334 | struct udevice *dev; |
| 335 | int bank; |
| 336 | |
| 337 | /* probe every MTD device */ |
| 338 | for (uclass_first_device(UCLASS_MTD, &dev); dev; |
| 339 | uclass_next_device(&dev)) { |
| 340 | /* nop */ |
| 341 | } |
| 342 | |
| 343 | /* calc total flash size */ |
| 344 | for (bank = 0; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank) |
| 345 | size += flash_info[bank].size; |
| 346 | |
| 347 | return size; |
| 348 | } |
| 349 | |
| 350 | static void pic32_flash_bank_init(flash_info_t *info, |
| 351 | ulong base, ulong size) |
| 352 | { |
| 353 | ulong sect_size; |
| 354 | int sect; |
| 355 | |
| 356 | /* device & manufacturer code */ |
| 357 | info->flash_id = FLASH_MAN_MCHP | FLASH_MCHP100T; |
| 358 | info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; |
| 359 | info->size = size; |
| 360 | |
| 361 | /* update sector (i.e page) info */ |
| 362 | sect_size = info->size / info->sector_count; |
| 363 | for (sect = 0; sect < info->sector_count; sect++) { |
| 364 | info->start[sect] = base; |
| 365 | /* protect each sector by default */ |
| 366 | info->protect[sect] = 1; |
| 367 | base += sect_size; |
| 368 | } |
| 369 | } |
| 370 | |
| 371 | static int pic32_flash_probe(struct udevice *dev) |
| 372 | { |
| 373 | void *blob = (void *)gd->fdt_blob; |
| 374 | int node = dev->of_offset; |
| 375 | const char *list, *end; |
| 376 | const fdt32_t *cell; |
| 377 | unsigned long addr, size; |
| 378 | int parent, addrc, sizec; |
| 379 | flash_info_t *info; |
| 380 | int len, idx; |
| 381 | |
| 382 | /* |
| 383 | * decode regs. there are multiple reg tuples, and they need to |
| 384 | * match with reg-names. |
| 385 | */ |
| 386 | parent = fdt_parent_offset(blob, node); |
| 387 | of_bus_default_count_cells(blob, parent, &addrc, &sizec); |
| 388 | list = fdt_getprop(blob, node, "reg-names", &len); |
| 389 | if (!list) |
| 390 | return -ENOENT; |
| 391 | |
| 392 | end = list + len; |
| 393 | cell = fdt_getprop(blob, node, "reg", &len); |
| 394 | if (!cell) |
| 395 | return -ENOENT; |
| 396 | |
| 397 | for (idx = 0, info = &flash_info[0]; list < end;) { |
| 398 | addr = fdt_translate_address((void *)blob, node, cell + idx); |
| 399 | size = fdt_addr_to_cpu(cell[idx + addrc]); |
| 400 | len = strlen(list); |
| 401 | if (!strncmp(list, "nvm", len)) { |
| 402 | /* NVM controller */ |
| 403 | nvm_regs_p = ioremap(addr, size); |
| 404 | } else if (!strncmp(list, "bank", 4)) { |
| 405 | /* Flash bank: use kseg0 cached address */ |
| 406 | pic32_flash_bank_init(info, CKSEG0ADDR(addr), size); |
| 407 | info++; |
| 408 | } |
| 409 | idx += addrc + sizec; |
| 410 | list += len + 1; |
| 411 | } |
| 412 | |
| 413 | /* disable flash write/erase operations */ |
| 414 | writel(NVM_WREN, &nvm_regs_p->ctrl.clr); |
| 415 | |
| 416 | #if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE) |
| 417 | /* monitor protection ON by default */ |
| 418 | flash_protect(FLAG_PROTECT_SET, |
| 419 | CONFIG_SYS_MONITOR_BASE, |
| 420 | CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, |
| 421 | &flash_info[0]); |
| 422 | #endif |
| 423 | |
| 424 | #ifdef CONFIG_ENV_IS_IN_FLASH |
| 425 | /* ENV protection ON by default */ |
| 426 | flash_protect(FLAG_PROTECT_SET, |
| 427 | CONFIG_ENV_ADDR, |
| 428 | CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, |
| 429 | &flash_info[0]); |
| 430 | #endif |
| 431 | return 0; |
| 432 | } |
| 433 | |
| 434 | static const struct udevice_id pic32_flash_ids[] = { |
| 435 | { .compatible = "microchip,pic32mzda-flash" }, |
| 436 | {} |
| 437 | }; |
| 438 | |
| 439 | U_BOOT_DRIVER(pic32_flash) = { |
| 440 | .name = "pic32_flash", |
| 441 | .id = UCLASS_MTD, |
| 442 | .of_match = pic32_flash_ids, |
| 443 | .probe = pic32_flash_probe, |
| 444 | }; |