blob: e1a8d3bc4b407d2f8543b95ba52a76a8414fb548 [file] [log] [blame]
Purna Chandra Mandal5c990452016-03-18 18:36:08 +05301/*
2 * Copyright (C) 2015
3 * Cristian Birsan <cristian.birsan@microchip.com>
4 * Purna Chandra Mandal <purna.mandal@microchip.com>
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#include <common.h>
10#include <dm.h>
11#include <fdt_support.h>
12#include <flash.h>
13#include <mach/pic32.h>
14#include <wait_bit.h>
15
16DECLARE_GLOBAL_DATA_PTR;
17
18/* NVM Controller registers */
19struct pic32_reg_nvm {
20 struct pic32_reg_atomic ctrl;
21 struct pic32_reg_atomic key;
22 struct pic32_reg_atomic addr;
23 struct pic32_reg_atomic data;
24};
25
26/* NVM operations */
27#define NVMOP_NOP 0
28#define NVMOP_WORD_WRITE 1
29#define NVMOP_PAGE_ERASE 4
30
31/* NVM control bits */
32#define NVM_WR BIT(15)
33#define NVM_WREN BIT(14)
34#define NVM_WRERR BIT(13)
35#define NVM_LVDERR BIT(12)
36
37/* NVM programming unlock register */
38#define LOCK_KEY 0x0
39#define UNLOCK_KEY1 0xaa996655
40#define UNLOCK_KEY2 0x556699aa
41
42/*
43 * PIC32 flash banks consist of number of pages, each page
44 * into number of rows and rows into number of words.
45 * Here we will maintain page information instead of sector.
46 */
47flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
48static struct pic32_reg_nvm *nvm_regs_p;
49
50static inline void flash_initiate_operation(u32 nvmop)
51{
52 /* set operation */
53 writel(nvmop, &nvm_regs_p->ctrl.raw);
54
55 /* enable flash write */
56 writel(NVM_WREN, &nvm_regs_p->ctrl.set);
57
58 /* unlock sequence */
59 writel(LOCK_KEY, &nvm_regs_p->key.raw);
60 writel(UNLOCK_KEY1, &nvm_regs_p->key.raw);
61 writel(UNLOCK_KEY2, &nvm_regs_p->key.raw);
62
63 /* initiate operation */
64 writel(NVM_WR, &nvm_regs_p->ctrl.set);
65}
66
67static int flash_wait_till_busy(const char *func, ulong timeout)
68{
69 int ret = wait_for_bit(__func__, &nvm_regs_p->ctrl.raw,
70 NVM_WR, false, timeout, false);
71
72 return ret ? ERR_TIMOUT : ERR_OK;
73}
74
75static inline int flash_complete_operation(void)
76{
77 u32 tmp;
78
79 tmp = readl(&nvm_regs_p->ctrl.raw);
80 if (tmp & NVM_WRERR) {
81 printf("Error in Block Erase - Lock Bit may be set!\n");
82 flash_initiate_operation(NVMOP_NOP);
83 return ERR_PROTECTED;
84 }
85
86 if (tmp & NVM_LVDERR) {
87 printf("Error in Block Erase - low-vol detected!\n");
88 flash_initiate_operation(NVMOP_NOP);
89 return ERR_NOT_ERASED;
90 }
91
92 /* disable flash write or erase operation */
93 writel(NVM_WREN, &nvm_regs_p->ctrl.clr);
94
95 return ERR_OK;
96}
97
98/*
99 * Erase flash sectors, returns:
100 * ERR_OK - OK
101 * ERR_INVAL - invalid sector arguments
102 * ERR_TIMOUT - write timeout
103 * ERR_NOT_ERASED - Flash not erased
104 * ERR_UNKNOWN_FLASH_VENDOR - incorrect flash
105 */
106int flash_erase(flash_info_t *info, int s_first, int s_last)
107{
108 ulong sect_start, sect_end, flags;
109 int prot, sect;
110 int rc;
111
112 if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_MCHP) {
113 printf("Can't erase unknown flash type %08lx - aborted\n",
114 info->flash_id);
115 return ERR_UNKNOWN_FLASH_VENDOR;
116 }
117
118 if ((s_first < 0) || (s_first > s_last)) {
119 printf("- no sectors to erase\n");
120 return ERR_INVAL;
121 }
122
123 prot = 0;
124 for (sect = s_first; sect <= s_last; ++sect) {
125 if (info->protect[sect])
126 prot++;
127 }
128
129 if (prot)
130 printf("- Warning: %d protected sectors will not be erased!\n",
131 prot);
132 else
133 printf("\n");
134
135 /* erase on unprotected sectors */
136 for (sect = s_first; sect <= s_last; sect++) {
137 if (info->protect[sect])
138 continue;
139
140 /* disable interrupts */
141 flags = disable_interrupts();
142
143 /* write destination page address (physical) */
144 sect_start = CPHYSADDR(info->start[sect]);
145 writel(sect_start, &nvm_regs_p->addr.raw);
146
147 /* page erase */
148 flash_initiate_operation(NVMOP_PAGE_ERASE);
149
150 /* wait */
151 rc = flash_wait_till_busy(__func__,
152 CONFIG_SYS_FLASH_ERASE_TOUT);
153
154 /* re-enable interrupts if necessary */
155 if (flags)
156 enable_interrupts();
157
158 if (rc != ERR_OK)
159 return rc;
160
161 rc = flash_complete_operation();
162 if (rc != ERR_OK)
163 return rc;
164
165 /*
166 * flash content is updated but cache might contain stale
167 * data, so invalidate dcache.
168 */
169 sect_end = info->start[sect] + info->size / info->sector_count;
170 invalidate_dcache_range(info->start[sect], sect_end);
171 }
172
173 printf(" done\n");
174 return ERR_OK;
175}
176
177int page_erase(flash_info_t *info, int sect)
178{
179 return 0;
180}
181
182/* Write a word to flash */
183static int write_word(flash_info_t *info, ulong dest, ulong word)
184{
185 ulong flags;
186 int rc;
187
188 /* read flash to check if it is sufficiently erased */
189 if ((readl((void __iomem *)dest) & word) != word) {
190 printf("Error, Flash not erased!\n");
191 return ERR_NOT_ERASED;
192 }
193
194 /* disable interrupts */
195 flags = disable_interrupts();
196
197 /* update destination page address (physical) */
198 writel(CPHYSADDR(dest), &nvm_regs_p->addr.raw);
199 writel(word, &nvm_regs_p->data.raw);
200
201 /* word write */
202 flash_initiate_operation(NVMOP_WORD_WRITE);
203
204 /* wait for operation to complete */
205 rc = flash_wait_till_busy(__func__, CONFIG_SYS_FLASH_WRITE_TOUT);
206
207 /* re-enable interrupts if necessary */
208 if (flags)
209 enable_interrupts();
210
211 if (rc != ERR_OK)
212 return rc;
213
214 return flash_complete_operation();
215}
216
217/*
218 * Copy memory to flash, returns:
219 * ERR_OK - OK
220 * ERR_TIMOUT - write timeout
221 * ERR_NOT_ERASED - Flash not erased
222 */
223int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
224{
225 ulong dst, tmp_le, len = cnt;
226 int i, l, rc;
227 uchar *cp;
228
229 /* get lower word aligned address */
230 dst = (addr & ~3);
231
232 /* handle unaligned start bytes */
233 l = addr - dst;
234 if (l != 0) {
235 tmp_le = 0;
236 for (i = 0, cp = (uchar *)dst; i < l; ++i, ++cp)
237 tmp_le |= *cp << (i * 8);
238
239 for (; (i < 4) && (cnt > 0); ++i, ++src, --cnt, ++cp)
240 tmp_le |= *src << (i * 8);
241
242 for (; (cnt == 0) && (i < 4); ++i, ++cp)
243 tmp_le |= *cp << (i * 8);
244
245 rc = write_word(info, dst, tmp_le);
246 if (rc)
247 goto out;
248
249 dst += 4;
250 }
251
252 /* handle word aligned part */
253 while (cnt >= 4) {
254 tmp_le = src[0] | src[1] << 8 | src[2] << 16 | src[3] << 24;
255 rc = write_word(info, dst, tmp_le);
256 if (rc)
257 goto out;
258 src += 4;
259 dst += 4;
260 cnt -= 4;
261 }
262
263 if (cnt == 0) {
264 rc = ERR_OK;
265 goto out;
266 }
267
268 /* handle unaligned tail bytes */
269 tmp_le = 0;
270 for (i = 0, cp = (uchar *)dst; (i < 4) && (cnt > 0); ++i, ++cp) {
271 tmp_le |= *src++ << (i * 8);
272 --cnt;
273 }
274
275 for (; i < 4; ++i, ++cp)
276 tmp_le |= *cp << (i * 8);
277
278 rc = write_word(info, dst, tmp_le);
279out:
280 /*
281 * flash content updated by nvm controller but CPU cache might
282 * have stale data, so invalidate dcache.
283 */
284 invalidate_dcache_range(addr, addr + len);
285
286 printf(" done\n");
287 return rc;
288}
289
290void flash_print_info(flash_info_t *info)
291{
292 int i;
293
294 if (info->flash_id == FLASH_UNKNOWN) {
295 printf("missing or unknown FLASH type\n");
296 return;
297 }
298
299 switch (info->flash_id & FLASH_VENDMASK) {
300 case FLASH_MAN_MCHP:
301 printf("Microchip Technology ");
302 break;
303 default:
304 printf("Unknown Vendor ");
305 break;
306 }
307
308 switch (info->flash_id & FLASH_TYPEMASK) {
309 case FLASH_MCHP100T:
310 printf("Internal (8 Mbit, 64 x 16k)\n");
311 break;
312 default:
313 printf("Unknown Chip Type\n");
314 break;
315 }
316
317 printf(" Size: %ld MB in %d Sectors\n",
318 info->size >> 20, info->sector_count);
319
320 printf(" Sector Start Addresses:");
321 for (i = 0; i < info->sector_count; ++i) {
322 if ((i % 5) == 0)
323 printf("\n ");
324
325 printf(" %08lX%s", info->start[i],
326 info->protect[i] ? " (RO)" : " ");
327 }
328 printf("\n");
329}
330
331unsigned long flash_init(void)
332{
333 unsigned long size = 0;
334 struct udevice *dev;
335 int bank;
336
337 /* probe every MTD device */
338 for (uclass_first_device(UCLASS_MTD, &dev); dev;
339 uclass_next_device(&dev)) {
340 /* nop */
341 }
342
343 /* calc total flash size */
344 for (bank = 0; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank)
345 size += flash_info[bank].size;
346
347 return size;
348}
349
350static void pic32_flash_bank_init(flash_info_t *info,
351 ulong base, ulong size)
352{
353 ulong sect_size;
354 int sect;
355
356 /* device & manufacturer code */
357 info->flash_id = FLASH_MAN_MCHP | FLASH_MCHP100T;
358 info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
359 info->size = size;
360
361 /* update sector (i.e page) info */
362 sect_size = info->size / info->sector_count;
363 for (sect = 0; sect < info->sector_count; sect++) {
364 info->start[sect] = base;
365 /* protect each sector by default */
366 info->protect[sect] = 1;
367 base += sect_size;
368 }
369}
370
371static int pic32_flash_probe(struct udevice *dev)
372{
373 void *blob = (void *)gd->fdt_blob;
Simon Glasse160f7d2017-01-17 16:52:55 -0700374 int node = dev_of_offset(dev);
Purna Chandra Mandal5c990452016-03-18 18:36:08 +0530375 const char *list, *end;
376 const fdt32_t *cell;
377 unsigned long addr, size;
378 int parent, addrc, sizec;
379 flash_info_t *info;
380 int len, idx;
381
382 /*
383 * decode regs. there are multiple reg tuples, and they need to
384 * match with reg-names.
385 */
386 parent = fdt_parent_offset(blob, node);
Simon Glasseed36602017-05-18 20:09:26 -0600387 fdt_support_default_count_cells(blob, parent, &addrc, &sizec);
Purna Chandra Mandal5c990452016-03-18 18:36:08 +0530388 list = fdt_getprop(blob, node, "reg-names", &len);
389 if (!list)
390 return -ENOENT;
391
392 end = list + len;
393 cell = fdt_getprop(blob, node, "reg", &len);
394 if (!cell)
395 return -ENOENT;
396
397 for (idx = 0, info = &flash_info[0]; list < end;) {
398 addr = fdt_translate_address((void *)blob, node, cell + idx);
399 size = fdt_addr_to_cpu(cell[idx + addrc]);
400 len = strlen(list);
401 if (!strncmp(list, "nvm", len)) {
402 /* NVM controller */
403 nvm_regs_p = ioremap(addr, size);
404 } else if (!strncmp(list, "bank", 4)) {
405 /* Flash bank: use kseg0 cached address */
406 pic32_flash_bank_init(info, CKSEG0ADDR(addr), size);
407 info++;
408 }
409 idx += addrc + sizec;
410 list += len + 1;
411 }
412
413 /* disable flash write/erase operations */
414 writel(NVM_WREN, &nvm_regs_p->ctrl.clr);
415
416#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
417 /* monitor protection ON by default */
418 flash_protect(FLAG_PROTECT_SET,
419 CONFIG_SYS_MONITOR_BASE,
420 CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
421 &flash_info[0]);
422#endif
423
424#ifdef CONFIG_ENV_IS_IN_FLASH
425 /* ENV protection ON by default */
426 flash_protect(FLAG_PROTECT_SET,
427 CONFIG_ENV_ADDR,
428 CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
429 &flash_info[0]);
430#endif
431 return 0;
432}
433
434static const struct udevice_id pic32_flash_ids[] = {
435 { .compatible = "microchip,pic32mzda-flash" },
436 {}
437};
438
439U_BOOT_DRIVER(pic32_flash) = {
440 .name = "pic32_flash",
441 .id = UCLASS_MTD,
442 .of_match = pic32_flash_ids,
443 .probe = pic32_flash_probe,
444};