Weijie Gao | bc4adc9 | 2023-07-19 17:17:54 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (c) 2022 MediaTek Inc. |
| 4 | * Author: Sam Shih <sam.shih@mediatek.com> |
| 5 | */ |
| 6 | |
| 7 | /dts-v1/; |
| 8 | #include "mt7988.dtsi" |
| 9 | #include <dt-bindings/gpio/gpio.h> |
| 10 | |
| 11 | / { |
| 12 | model = "mt7988-rfb"; |
| 13 | compatible = "mediatek,mt7988-rfb"; |
| 14 | |
| 15 | chosen { |
| 16 | stdout-path = &uart0; |
| 17 | }; |
| 18 | |
| 19 | memory@40000000 { |
| 20 | device_type = "memory"; |
| 21 | reg = <0 0x40000000 0 0x10000000>; |
| 22 | }; |
| 23 | |
| 24 | reg_3p3v: regulator-3p3v { |
| 25 | compatible = "regulator-fixed"; |
| 26 | regulator-name = "fixed-3.3V"; |
| 27 | regulator-min-microvolt = <3300000>; |
| 28 | regulator-max-microvolt = <3300000>; |
| 29 | regulator-boot-on; |
| 30 | regulator-always-on; |
| 31 | }; |
| 32 | |
| 33 | reg_1p8v: regulator-1p8v { |
| 34 | compatible = "regulator-fixed"; |
| 35 | regulator-name = "fixed-1.8V"; |
| 36 | regulator-min-microvolt = <1800000>; |
| 37 | regulator-max-microvolt = <1800000>; |
| 38 | regulator-boot-on; |
| 39 | regulator-always-on; |
| 40 | }; |
| 41 | }; |
| 42 | |
| 43 | &uart0 { |
| 44 | status = "okay"; |
| 45 | }; |
| 46 | |
| 47 | &i2c1 { |
| 48 | pinctrl-names = "default"; |
| 49 | pinctrl-0 = <&i2c1_pins>; |
| 50 | status = "okay"; |
| 51 | }; |
| 52 | |
| 53 | ð { |
| 54 | status = "okay"; |
| 55 | mediatek,gmac-id = <0>; |
| 56 | phy-mode = "usxgmii"; |
| 57 | mediatek,switch = "mt7988"; |
| 58 | |
| 59 | fixed-link { |
| 60 | speed = <1000>; |
| 61 | full-duplex; |
| 62 | pause; |
| 63 | }; |
| 64 | }; |
| 65 | |
| 66 | &pinctrl { |
| 67 | i2c1_pins: i2c1-pins { |
| 68 | mux { |
| 69 | function = "i2c"; |
| 70 | groups = "i2c1_0"; |
| 71 | }; |
| 72 | }; |
| 73 | |
| 74 | pwm_pins: pwm-pins { |
| 75 | mux { |
| 76 | function = "pwm"; |
| 77 | groups = "pwm0", "pwm1", "pwm2", "pwm3", "pwm4", |
| 78 | "pwm5", "pwm6", "pwm7"; |
| 79 | }; |
| 80 | }; |
| 81 | |
| 82 | spi0_pins: spi0-pins { |
| 83 | mux { |
| 84 | function = "spi"; |
| 85 | groups = "spi0", "spi0_wp_hold"; |
| 86 | }; |
| 87 | }; |
| 88 | |
| 89 | spi2_pins: spi2-pins { |
| 90 | mux { |
| 91 | function = "spi"; |
| 92 | groups = "spi2", "spi2_wp_hold"; |
| 93 | }; |
| 94 | }; |
| 95 | |
| 96 | mmc0_pins_default: mmc0default { |
| 97 | mux { |
| 98 | function = "flash"; |
| 99 | groups = "emmc_51"; |
| 100 | }; |
| 101 | |
| 102 | conf-cmd-dat { |
| 103 | pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", |
| 104 | "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", |
| 105 | "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; |
| 106 | input-enable; |
| 107 | }; |
| 108 | |
| 109 | conf-clk { |
| 110 | pins = "EMMC_CK"; |
| 111 | }; |
| 112 | |
| 113 | conf-dsl { |
| 114 | pins = "EMMC_DSL"; |
| 115 | }; |
| 116 | |
| 117 | conf-rst { |
| 118 | pins = "EMMC_RSTB"; |
| 119 | }; |
| 120 | }; |
| 121 | }; |
| 122 | |
| 123 | &pwm { |
| 124 | pinctrl-names = "default"; |
| 125 | pinctrl-0 = <&pwm_pins>; |
| 126 | status = "okay"; |
| 127 | }; |
| 128 | |
| 129 | &spi0 { |
| 130 | pinctrl-names = "default"; |
| 131 | pinctrl-0 = <&spi0_pins>; |
| 132 | #address-cells = <1>; |
| 133 | #size-cells = <0>; |
| 134 | status = "okay"; |
| 135 | must_tx; |
| 136 | enhance_timing; |
| 137 | dma_ext; |
| 138 | ipm_design; |
| 139 | support_quad; |
| 140 | tick_dly = <2>; |
| 141 | sample_sel = <0>; |
| 142 | |
| 143 | spi_nand@0 { |
| 144 | compatible = "spi-nand"; |
| 145 | reg = <0>; |
| 146 | spi-max-frequency = <52000000>; |
| 147 | }; |
| 148 | }; |
| 149 | |
| 150 | &spi2 { |
| 151 | pinctrl-names = "default"; |
| 152 | pinctrl-0 = <&spi2_pins>; |
| 153 | #address-cells = <1>; |
| 154 | #size-cells = <0>; |
| 155 | status = "okay"; |
| 156 | must_tx; |
| 157 | enhance_timing; |
| 158 | dma_ext; |
| 159 | ipm_design; |
| 160 | support_quad; |
| 161 | tick_dly = <2>; |
| 162 | sample_sel = <0>; |
| 163 | |
| 164 | spi_nor@0 { |
| 165 | compatible = "jedec,spi-nor"; |
| 166 | reg = <0>; |
| 167 | spi-max-frequency = <52000000>; |
| 168 | }; |
| 169 | }; |
| 170 | |
| 171 | &mmc0 { |
| 172 | pinctrl-names = "default"; |
| 173 | pinctrl-0 = <&mmc0_pins_default>; |
| 174 | max-frequency = <52000000>; |
| 175 | bus-width = <8>; |
| 176 | cap-mmc-highspeed; |
| 177 | cap-mmc-hw-reset; |
| 178 | vmmc-supply = <®_3p3v>; |
| 179 | vqmmc-supply = <®_1p8v>; |
| 180 | non-removable; |
| 181 | status = "okay"; |
| 182 | }; |