| Heiko Schocher | 1e8f4e7 | 2008-11-20 09:59:09 +0100 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2008 |
| 3 | * Heiko Schocher, DENX Software Engineering, hs@denx.de. |
| 4 | * |
| 5 | * See file CREDITS for list of people who contributed to this |
| 6 | * project. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License as |
| 10 | * published by the Free Software Foundation; either version 2 of |
| 11 | * the License, or (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 21 | * MA 02111-1307 USA |
| 22 | */ |
| 23 | |
| 24 | #ifndef __CONFIG_KEYMILE_H |
| 25 | #define __CONFIG_KEYMILE_H |
| 26 | |
| 27 | /* Do boardspecific init for all boards */ |
| 28 | #define CONFIG_BOARD_EARLY_INIT_R 1 |
| 29 | |
| 30 | #if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD) |
| 31 | #define CONFIG_BOOTCOUNT_LIMIT |
| 32 | #endif |
| 33 | |
| 34 | /* |
| 35 | * Command line configuration. |
| 36 | */ |
| 37 | #include <config_cmd_default.h> |
| 38 | |
| 39 | #define CONFIG_CMD_ASKENV |
| 40 | #define CONFIG_CMD_DHCP |
| 41 | #define CONFIG_CMD_ECHO |
| 42 | #define CONFIG_CMD_IMMAP |
| 43 | #define CONFIG_CMD_MII |
| 44 | #define CONFIG_CMD_PING |
| 45 | |
| 46 | /* should go away, if kmeter I2C support is enabled */ |
| 47 | #if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD) |
| 48 | #define CONFIG_CMD_DTT |
| 49 | #define CONFIG_CMD_EEPROM |
| 50 | #define CONFIG_CMD_I2C |
| 51 | #endif |
| 52 | |
| 53 | #undef CONFIG_WATCHDOG /* disable platform specific watchdog */ |
| 54 | |
| 55 | #define CONFIG_BOOTCOMMAND "run net_nfs" |
| 56 | #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ |
| 57 | #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ |
| 58 | |
| 59 | /* |
| 60 | * Miscellaneous configurable options |
| 61 | */ |
| 62 | #define CONFIG_SYS_HUSH_PARSER |
| 63 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
| 64 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| 65 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ |
| 66 | #if defined(CONFIG_CMD_KGDB) |
| 67 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| 68 | #else |
| 69 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| 70 | #endif |
| 71 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| 72 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| 73 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| 74 | #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ |
| 75 | |
| 76 | /* should go away, if kmeter I2C support is enabled */ |
| 77 | #if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD) |
| 78 | #define CONFIG_HUSH_INIT_VAR 1 |
| 79 | #endif |
| 80 | |
| 81 | #define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */ |
| 82 | #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ |
| 83 | #define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ |
| 84 | |
| 85 | #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ |
| 86 | |
| 87 | #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ |
| 88 | |
| 89 | #define CONFIG_BAUDRATE 115200 |
| 90 | #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } |
| 91 | |
| 92 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ |
| 93 | #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ |
| 94 | |
| 95 | /* |
| 96 | * How to get access to the slot ID. Put this here to make it easy |
| 97 | * to modify in a centralized location. This is used in the HDLC |
| 98 | * driver to set the MAC. |
| 99 | */ |
| 100 | #define CONFIG_CHECK_ETHERNET_PRESENT 1 |
| 101 | #define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE |
| 102 | #define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */ |
| 103 | #define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */ |
| 104 | |
| 105 | /* |
| 106 | * BOOTP options |
| 107 | */ |
| 108 | #define CONFIG_BOOTP_BOOTFILESIZE |
| 109 | #define CONFIG_BOOTP_BOOTPATH |
| 110 | #define CONFIG_BOOTP_GATEWAY |
| 111 | #define CONFIG_BOOTP_HOSTNAME |
| 112 | |
| 113 | #endif /* __CONFIG_KEYMILE_H */ |