blob: a0094372a46fc01ec47fe89eb7132f99d08405f9 [file] [log] [blame]
wdenkaffae2b2002-08-17 09:36:01 +00001/*
Wolfgang Denk460c3222005-08-04 01:14:12 +02002 * Part of this code has been derived from linux:
3 * Universal Host Controller Interface driver for USB (take II).
4 *
5 * (c) 1999-2001 Georg Acher, acher@in.tum.de (executive slave) (base guitar)
6 * Deti Fliegl, deti@fliegl.de (executive slave) (lead voice)
7 * Thomas Sailer, sailer@ife.ee.ethz.ch (chief consultant) (cheer leader)
8 * Roman Weissgaerber, weissg@vienna.at (virt root hub) (studio porter)
9 * (c) 2000 Yggdrasil Computing, Inc. (port of new PCI interface support
10 * from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
11 * (C) 2000 David Brownell, david-b@pacbell.net (usb-ohci.c)
12 *
13 * HW-initalization based on material of
14 *
15 * (C) Copyright 1999 Linus Torvalds
16 * (C) Copyright 1999 Johannes Erdfelt
17 * (C) Copyright 1999 Randy Dunlap
18 * (C) Copyright 1999 Gregory P. Smith
19 *
20 *
21 * Adapted for U-Boot:
22 * (C) Copyright 2001 Denis Peter, MPL AG Switzerland
wdenkaffae2b2002-08-17 09:36:01 +000023 *
24 * See file CREDITS for list of people who contributed to this
25 * project.
26 *
27 * This program is free software; you can redistribute it and/or
28 * modify it under the terms of the GNU General Public License as
29 * published by the Free Software Foundation; either version 2 of
30 * the License, or (at your option) any later version.
31 *
32 * This program is distributed in the hope that it will be useful,
33 * but WITHOUT ANY WARRANTY; without even the implied warranty of
34 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
35 * GNU General Public License for more details.
36 *
37 * You should have received a copy of the GNU General Public License
38 * along with this program; if not, write to the Free Software
39 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
40 * MA 02111-1307 USA
41 *
wdenkaffae2b2002-08-17 09:36:01 +000042 *
43 */
44
45/**********************************************************************
46 * How it works:
47 * -------------
48 * The framelist / Transfer descriptor / Queue Heads are similar like
49 * in the linux usb_uhci.c.
50 *
51 * During initialization, the following skeleton is allocated in init_skel:
52 *
53 * framespecific | common chain
54 *
55 * framelist[]
56 * [ 0 ]-----> TD ---------\
57 * [ 1 ]-----> TD ----------> TD ------> QH -------> QH -------> QH ---> NULL
58 * ... TD ---------/
59 * [1023]-----> TD --------/
60 *
61 * ^^ ^^ ^^ ^^ ^^
62 * 7 TDs for 1 TD for Start of Start of End Chain
63 * INT (2-128ms) 1ms-INT CTRL Chain BULK Chain
64 *
65 *
66 * Since this is a bootloader, the isochronous transfer descriptor have been removed.
67 *
68 * Interrupt Transfers.
69 * --------------------
70 * For Interupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They
71 * will be inserted after the appropriate (depending the interval setting) skeleton TD.
72 * If an interrupt has been detected the dev->irqhandler is called. The status and number
73 * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the
74 * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned,
75 * the interrupt TD will be reactivated.
76 *
77 * Control Transfers
78 * -----------------
79 * Control Transfers are issued by filling the tmp_td with the appropriate data and connect
80 * them to the qh_cntrl queue header. Before other control/bulk transfers can be issued,
81 * the programm has to wait for completion. This does not allows asynchronous data transfer.
82 *
83 * Bulk Transfers
84 * --------------
85 * Bulk Transfers are issued by filling the tmp_td with the appropriate data and connect
86 * them to the qh_bulk queue header. Before other control/bulk transfers can be issued,
87 * the programm has to wait for completion. This does not allows asynchronous data transfer.
88 *
89 *
90 */
91
92#include <common.h>
93#include <pci.h>
94
95#ifdef CONFIG_USB_UHCI
96
97#include <usb.h>
98#include "usb_uhci.h"
99
100#define USB_MAX_TEMP_TD 128 /* number of temporary TDs for bulk and control transfers */
101#define USB_MAX_TEMP_INT_TD 32 /* number of temporary TDs for Interrupt transfers */
102
103
104#undef USB_UHCI_DEBUG
105
106#ifdef USB_UHCI_DEBUG
107#define USB_UHCI_PRINTF(fmt,args...) printf (fmt ,##args)
108#else
109#define USB_UHCI_PRINTF(fmt,args...)
110#endif
111
112
113static int irqvec = -1; /* irq vector, if -1 uhci is stopped / reseted */
114unsigned int usb_base_addr; /* base address */
115
116static uhci_td_t td_int[8]; /* Interrupt Transfer descriptors */
117static uhci_qh_t qh_cntrl; /* control Queue Head */
118static uhci_qh_t qh_bulk; /* bulk Queue Head */
119static uhci_qh_t qh_end; /* end Queue Head */
120static uhci_td_t td_last; /* last TD (linked with end chain) */
121
122/* temporary tds */
123static uhci_td_t tmp_td[USB_MAX_TEMP_TD]; /* temporary bulk/control td's */
124static uhci_td_t tmp_int_td[USB_MAX_TEMP_INT_TD]; /* temporary interrupt td's */
125
126static unsigned long framelist[1024] __attribute__ ((aligned (0x1000))); /* frame list */
127
128static struct virt_root_hub rh; /* struct for root hub */
129
130/**********************************************************************
131 * some forward decleration
132 */
133int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
134 void *buffer, int transfer_len,struct devrequest *setup);
135
136/* fill a td with the approproiate data. Link, status, info and buffer
137 * are used by the USB controller itselfes, dev is used to identify the
138 * "connected" device
139 */
140void usb_fill_td(uhci_td_t* td,unsigned long link,unsigned long status,
141 unsigned long info, unsigned long buffer, unsigned long dev)
142{
143 td->link=swap_32(link);
144 td->status=swap_32(status);
145 td->info=swap_32(info);
146 td->buffer=swap_32(buffer);
147 td->dev_ptr=dev;
148}
149
150/* fill a qh with the approproiate data. Head and element are used by the USB controller
151 * itselfes. As soon as a valid dev_ptr is filled, a td chain is connected to the qh.
152 * Please note, that after completion of the td chain, the entry element is removed /
153 * marked invalid by the USB controller.
154 */
155void usb_fill_qh(uhci_qh_t* qh,unsigned long head,unsigned long element)
156{
157 qh->head=swap_32(head);
158 qh->element=swap_32(element);
159 qh->dev_ptr=0L;
160}
161
162/* get the status of a td->status
163 */
164unsigned long usb_uhci_td_stat(unsigned long status)
165{
166 unsigned long result=0;
167 result |= (status & TD_CTRL_NAK) ? USB_ST_NAK_REC : 0;
168 result |= (status & TD_CTRL_STALLED) ? USB_ST_STALLED : 0;
169 result |= (status & TD_CTRL_DBUFERR) ? USB_ST_BUF_ERR : 0;
170 result |= (status & TD_CTRL_BABBLE) ? USB_ST_BABBLE_DET : 0;
171 result |= (status & TD_CTRL_CRCTIMEO) ? USB_ST_CRC_ERR : 0;
172 result |= (status & TD_CTRL_BITSTUFF) ? USB_ST_BIT_ERR : 0;
173 result |= (status & TD_CTRL_ACTIVE) ? USB_ST_NOT_PROC : 0;
174 return result;
175}
176
177/* get the status and the transfered len of a td chain.
178 * called from the completion handler
179 */
180int usb_get_td_status(uhci_td_t *td,struct usb_device *dev)
181{
182 unsigned long temp,info;
183 unsigned long stat;
184 uhci_td_t *mytd=td;
185
186 if(dev->devnum==rh.devnum)
187 return 0;
188 dev->act_len=0;
189 stat=0;
190 do {
191 temp=swap_32((unsigned long)mytd->status);
192 stat=usb_uhci_td_stat(temp);
193 info=swap_32((unsigned long)mytd->info);
194 if(((info & 0xff)!= USB_PID_SETUP) &&
195 (((info >> 21) & 0x7ff)!= 0x7ff) &&
196 (temp & 0x7FF)!=0x7ff)
197 { /* if not setup and not null data pack */
198 dev->act_len+=(temp & 0x7FF) + 1; /* the transfered len is act_len + 1 */
199 }
200 if(stat) { /* status no ok */
201 dev->status=stat;
202 return -1;
203 }
204 temp=swap_32((unsigned long)mytd->link);
205 mytd=(uhci_td_t *)(temp & 0xfffffff0);
206 }while((temp & 0x1)==0); /* process all TDs */
207 dev->status=stat;
208 return 0; /* Ok */
209}
210
211
212/*-------------------------------------------------------------------
213 * LOW LEVEL STUFF
214 * assembles QHs und TDs for control, bulk and iso
215 *-------------------------------------------------------------------*/
216
217/* Submits a control message. That is a Setup, Data and Status transfer.
218 * Routine does not wait for completion.
219 */
220int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
221 int transfer_len,struct devrequest *setup)
222{
223 unsigned long destination, status;
224 int maxsze = usb_maxpacket(dev, pipe);
225 unsigned long dataptr;
226 int len;
227 int pktsze;
228 int i=0;
229
230 if (!maxsze) {
231 USB_UHCI_PRINTF("uhci_submit_control_urb: pipesize for pipe %lx is zero\n", pipe);
232 return -1;
233 }
234 if(((pipe>>8)&0x7f)==rh.devnum) {
235 /* this is the root hub -> redirect it */
236 return uhci_submit_rh_msg(dev,pipe,buffer,transfer_len,setup);
237 }
238 USB_UHCI_PRINTF("uhci_submit_control start len %x, maxsize %x\n",transfer_len,maxsze);
239 /* The "pipe" thing contains the destination in bits 8--18 */
240 destination = (pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; /* Setup stage */
241 /* 3 errors */
242 status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27);
243 /* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD); */
244 /* Build the TD for the control request, try forever, 8 bytes of data */
245 usb_fill_td(&tmp_td[i],UHCI_PTR_TERM ,status, destination | (7 << 21),(unsigned long)setup,(unsigned long)dev);
246#if 0
247 {
248 char *sp=(char *)setup;
249 printf("SETUP to pipe %lx: %x %x %x %x %x %x %x %x\n", pipe,
250 sp[0],sp[1],sp[2],sp[3],sp[4],sp[5],sp[6],sp[7]);
251 }
252#endif
253 dataptr = (unsigned long)buffer;
254 len=transfer_len;
255
256 /* If direction is "send", change the frame from SETUP (0x2D)
257 to OUT (0xE1). Else change it from SETUP to IN (0x69). */
258 destination = (pipe & PIPE_DEVEP_MASK) | ((pipe & USB_DIR_IN)==0 ? USB_PID_OUT : USB_PID_IN);
259 while (len > 0) {
260 /* data stage */
261 pktsze = len;
262 i++;
263 if (pktsze > maxsze)
264 pktsze = maxsze;
265 destination ^= 1 << TD_TOKEN_TOGGLE; /* toggle DATA0/1 */
266 usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, destination | ((pktsze - 1) << 21),dataptr,(unsigned long)dev); /* Status, pktsze bytes of data */
267 tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]);
268
269 dataptr += pktsze;
270 len -= pktsze;
271 }
272
273 /* Build the final TD for control status */
274 /* It's only IN if the pipe is out AND we aren't expecting data */
275
276 destination &= ~UHCI_PID;
277 if (((pipe & USB_DIR_IN)==0) || (transfer_len == 0))
278 destination |= USB_PID_IN;
279 else
280 destination |= USB_PID_OUT;
281 destination |= 1 << TD_TOKEN_TOGGLE; /* End in Data1 */
282 i++;
283 status &=~TD_CTRL_SPD;
284 /* no limit on errors on final packet , 0 bytes of data */
285 usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status | TD_CTRL_IOC, destination | (UHCI_NULL_DATA_SIZE << 21),0,(unsigned long)dev);
286 tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]); /* queue status td */
287 /* usb_show_td(i+1);*/
288 USB_UHCI_PRINTF("uhci_submit_control end (%d tmp_tds used)\n",i);
289 /* first mark the control QH element terminated */
290 qh_cntrl.element=0xffffffffL;
291 /* set qh active */
292 qh_cntrl.dev_ptr=(unsigned long)dev;
293 /* fill in tmp_td_chain */
294 qh_cntrl.element=swap_32((unsigned long)&tmp_td[0]);
295 return 0;
296}
297
298/*-------------------------------------------------------------------
299 * Prepare TDs for bulk transfers.
300 */
301int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len)
302{
303 unsigned long destination, status,info;
304 unsigned long dataptr;
305 int maxsze = usb_maxpacket(dev, pipe);
306 int len;
307 int i=0;
308
309 if(transfer_len < 0) {
310 printf("Negative transfer length in submit_bulk\n");
311 return -1;
312 }
313 if (!maxsze)
314 return -1;
315 /* The "pipe" thing contains the destination in bits 8--18. */
316 destination = (pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe);
317 /* 3 errors */
318 status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27);
319 /* ((urb->transfer_flags & USB_DISABLE_SPD) ? 0 : TD_CTRL_SPD) | (3 << 27); */
320 /* Build the TDs for the bulk request */
321 len = transfer_len;
322 dataptr = (unsigned long)buffer;
323 do {
324 int pktsze = len;
325 if (pktsze > maxsze)
326 pktsze = maxsze;
327 /* pktsze bytes of data */
328 info = destination | (((pktsze - 1)&UHCI_NULL_DATA_SIZE) << 21) |
329 (usb_gettoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)) << TD_TOKEN_TOGGLE);
330
331 if((len-pktsze)==0)
332 status |= TD_CTRL_IOC; /* last one generates INT */
333
334 usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, info,dataptr,(unsigned long)dev); /* Status, pktsze bytes of data */
335 if(i>0)
336 tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]);
337 i++;
338 dataptr += pktsze;
339 len -= pktsze;
340 usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe));
341 } while (len > 0);
342 /* first mark the bulk QH element terminated */
343 qh_bulk.element=0xffffffffL;
344 /* set qh active */
345 qh_bulk.dev_ptr=(unsigned long)dev;
346 /* fill in tmp_td_chain */
347 qh_bulk.element=swap_32((unsigned long)&tmp_td[0]);
348 return 0;
349}
350
351
352/* search a free interrupt td
353 */
354uhci_td_t *uhci_alloc_int_td(void)
355{
356 int i;
357 for(i=0;i<USB_MAX_TEMP_INT_TD;i++) {
358 if(tmp_int_td[i].dev_ptr==0) /* no device assigned -> free TD */
359 return &tmp_int_td[i];
360 }
361 return NULL;
362}
363
364#if 0
365void uhci_show_temp_int_td(void)
366{
367 int i;
368 for(i=0;i<USB_MAX_TEMP_INT_TD;i++) {
369 if((tmp_int_td[i].dev_ptr&0x01)!=0x1L) /* no device assigned -> free TD */
370 printf("temp_td %d is assigned to dev %lx\n",i,tmp_int_td[i].dev_ptr);
371 }
372 printf("all others temp_tds are free\n");
373}
374#endif
375/*-------------------------------------------------------------------
376 * submits USB interrupt (ie. polling ;-)
377 */
378int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len, int interval)
379{
380 int nint, n;
381 unsigned long status, destination;
382 unsigned long info,tmp;
383 uhci_td_t *mytd;
384 if (interval < 0 || interval >= 256)
385 return -1;
386
387 if (interval == 0)
388 nint = 0;
389 else {
390 for (nint = 0, n = 1; nint <= 8; nint++, n += n) /* round interval down to 2^n */
391 {
392 if(interval < n) {
393 interval = n / 2;
394 break;
395 }
396 }
397 nint--;
398 }
399
400 USB_UHCI_PRINTF("Rounded interval to %i, chain %i\n", interval, nint);
401 mytd=uhci_alloc_int_td();
402 if(mytd==NULL) {
403 printf("No free INT TDs found\n");
404 return -1;
405 }
406 status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | TD_CTRL_IOC | (3 << 27);
407/* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD) | (3 << 27);
408*/
409
410 destination =(pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe) | (((transfer_len - 1) & 0x7ff) << 21);
411
412 info = destination | (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)) << TD_TOKEN_TOGGLE);
413 tmp = swap_32(td_int[nint].link);
414 usb_fill_td(mytd,tmp,status, info,(unsigned long)buffer,(unsigned long)dev);
415 /* Link it */
416 tmp = swap_32((unsigned long)mytd);
417 td_int[nint].link=tmp;
418
419 usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe));
420
421 return 0;
422}
423
424/**********************************************************************
425 * Low Level functions
426 */
427
428
429void reset_hc(void)
430{
431
432 /* Global reset for 100ms */
433 out16r( usb_base_addr + USBPORTSC1,0x0204);
434 out16r( usb_base_addr + USBPORTSC2,0x0204);
435 out16r( usb_base_addr + USBCMD,USBCMD_GRESET | USBCMD_RS);
436 /* Turn off all interrupts */
437 out16r(usb_base_addr + USBINTR,0);
438 wait_ms(50);
439 out16r( usb_base_addr + USBCMD,0);
440 wait_ms(10);
441}
442
443void start_hc(void)
444{
445 int timeout = 1000;
446
447 while(in16r(usb_base_addr + USBCMD) & USBCMD_HCRESET) {
448 if (!--timeout) {
449 printf("USBCMD_HCRESET timed out!\n");
450 break;
451 }
452 }
453 /* Turn on all interrupts */
454 out16r(usb_base_addr + USBINTR,USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP);
455 /* Start at frame 0 */
456 out16r(usb_base_addr + USBFRNUM,0);
457 /* set Framebuffer base address */
458 out32r(usb_base_addr+USBFLBASEADD,(unsigned long)&framelist);
459 /* Run and mark it configured with a 64-byte max packet */
460 out16r(usb_base_addr + USBCMD,USBCMD_RS | USBCMD_CF | USBCMD_MAXP);
461}
462
463/* Initialize the skeleton
464 */
465void usb_init_skel(void)
466{
467 unsigned long temp;
468 int n;
469
470 for(n=0;n<USB_MAX_TEMP_INT_TD;n++)
471 tmp_int_td[n].dev_ptr=0L; /* no devices connected */
472 /* last td */
473 usb_fill_td(&td_last,UHCI_PTR_TERM,TD_CTRL_IOC ,0,0,0L);
474 /* usb_fill_td(&td_last,UHCI_PTR_TERM,0,0,0); */
475 /* End Queue Header */
476 usb_fill_qh(&qh_end,UHCI_PTR_TERM,(unsigned long)&td_last);
477 /* Bulk Queue Header */
478 temp=(unsigned long)&qh_end;
479 usb_fill_qh(&qh_bulk,temp | UHCI_PTR_QH,UHCI_PTR_TERM);
480 /* Control Queue Header */
481 temp=(unsigned long)&qh_bulk;
482 usb_fill_qh(&qh_cntrl, temp | UHCI_PTR_QH,UHCI_PTR_TERM);
483 /* 1ms Interrupt td */
484 temp=(unsigned long)&qh_cntrl;
485 usb_fill_td(&td_int[0],temp | UHCI_PTR_QH,0,0,0,0L);
486 temp=(unsigned long)&td_int[0];
487 for(n=1; n<8; n++)
488 usb_fill_td(&td_int[n],temp,0,0,0,0L);
489 for (n = 0; n < 1024; n++) {
490 /* link all framelist pointers to one of the interrupts */
491 int m, o;
492 if ((n&127)==127)
493 framelist[n]= swap_32((unsigned long)&td_int[0]);
494 else
495 for (o = 1, m = 2; m <= 128; o++, m += m)
496 if ((n & (m - 1)) == ((m - 1) / 2))
497 framelist[n]= swap_32((unsigned long)&td_int[o]);
498 }
499}
500
501/* check the common skeleton for completed transfers, and update the status
502 * of the "connected" device. Called from the IRQ routine.
503 */
504void usb_check_skel(void)
505{
506 struct usb_device *dev;
507 /* start with the control qh */
508 if(qh_cntrl.dev_ptr!=0) /* it's a device assigned check if this caused IRQ */
509 {
510 dev=(struct usb_device *)qh_cntrl.dev_ptr;
511 usb_get_td_status(&tmp_td[0],dev); /* update status */
512 if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */
513 qh_cntrl.dev_ptr=0;
514 }
515 }
516 /* now process the bulk */
517 if(qh_bulk.dev_ptr!=0) /* it's a device assigned check if this caused IRQ */
518 {
519 dev=(struct usb_device *)qh_bulk.dev_ptr;
520 usb_get_td_status(&tmp_td[0],dev); /* update status */
521 if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */
522 qh_bulk.dev_ptr=0;
523 }
524 }
525}
526
527/* check the interrupt chain, ubdate the status of the appropriate device,
528 * call the appropriate irqhandler and reactivate the TD if the irqhandler
529 * returns with 1
530 */
531void usb_check_int_chain(void)
532{
533 int i,res;
534 unsigned long link,status;
535 struct usb_device *dev;
536 uhci_td_t *td,*prevtd;
537
538 for(i=0;i<8;i++) {
Wolfgang Denkd0ff51b2008-07-14 15:19:07 +0200539 prevtd = &td_int[i]; /* the first previous td is the skeleton td */
wdenkaffae2b2002-08-17 09:36:01 +0000540 link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */
541 td=(uhci_td_t *)link; /* assign it */
542 /* all interrupt TDs are finally linked to the td_int[0].
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200543 * so we process all until we find the td_int[0].
wdenkaffae2b2002-08-17 09:36:01 +0000544 * if int0 chain points to a QH, we're also done
545 */
546 while(((i>0) && (link != (unsigned long)&td_int[0])) ||
547 ((i==0) && !(swap_32(td->link) & UHCI_PTR_QH)))
548 {
549 /* check if a device is assigned with this td */
550 status=swap_32(td->status);
551 if((td->dev_ptr!=0L) && !(status & TD_CTRL_ACTIVE)) {
552 /* td is not active and a device is assigned -> call irqhandler */
553 dev=(struct usb_device *)td->dev_ptr;
554 dev->irq_act_len=((status & 0x7FF)==0x7FF) ? 0 : (status & 0x7FF) + 1; /* transfered length */
555 dev->irq_status=usb_uhci_td_stat(status); /* get status */
556 res=dev->irq_handle(dev); /* call irqhandler */
557 if(res==1) {
558 /* reactivate */
559 status|=TD_CTRL_ACTIVE;
560 td->status=swap_32(status);
561 prevtd=td; /* previous td = this td */
562 }
563 else {
564 prevtd->link=td->link; /* link previous td directly to the nex td -> unlinked */
565 /* remove device pointer */
566 td->dev_ptr=0L;
567 }
568 } /* if we call the irq handler */
569 link=swap_32(td->link) & 0xfffffff0; /* next in chain */
570 td=(uhci_td_t *)link; /* assign it */
571 } /* process all td in this int chain */
572 } /* next interrupt chain */
573}
574
575
576/* usb interrupt service routine.
577 */
578void handle_usb_interrupt(void)
579{
580 unsigned short status;
581
582 /*
583 * Read the interrupt status, and write it back to clear the
584 * interrupt cause
585 */
586
587 status = in16r(usb_base_addr + USBSTS);
588
589 if (!status) /* shared interrupt, not mine */
590 return;
591 if (status != 1) {
592 /* remove host controller halted state */
593 if ((status&0x20) && ((in16r(usb_base_addr+USBCMD) && USBCMD_RS)==0)) {
594 out16r(usb_base_addr + USBCMD, USBCMD_RS | in16r(usb_base_addr + USBCMD));
595 }
596 }
597 usb_check_int_chain(); /* call interrupt handlers for int tds */
598 usb_check_skel(); /* call completion handler for common transfer routines */
599 out16r(usb_base_addr+USBSTS,status);
600}
601
602
603/* init uhci
604 */
605int usb_lowlevel_init(void)
606{
607 unsigned char temp;
608 int busdevfunc;
609
610 busdevfunc=pci_find_device(USB_UHCI_VEND_ID,USB_UHCI_DEV_ID,0); /* get PCI Device ID */
611 if(busdevfunc==-1) {
612 printf("Error USB UHCI (%04X,%04X) not found\n",USB_UHCI_VEND_ID,USB_UHCI_DEV_ID);
613 return -1;
614 }
615 pci_read_config_byte(busdevfunc,PCI_INTERRUPT_LINE,&temp);
616 irqvec = temp;
617 irq_free_handler(irqvec);
618 USB_UHCI_PRINTF("Interrupt Line = %d, is %d\n",irqvec);
619 pci_read_config_byte(busdevfunc,PCI_INTERRUPT_PIN,&temp);
620 USB_UHCI_PRINTF("Interrupt Pin = %ld\n",temp);
621 pci_read_config_dword(busdevfunc,PCI_BASE_ADDRESS_4,&usb_base_addr);
622 USB_UHCI_PRINTF("IO Base Address = 0x%lx\n",usb_base_addr);
623 usb_base_addr&=0xFFFFFFF0;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200624 usb_base_addr+=CONFIG_SYS_ISA_IO_BASE_ADDRESS;
wdenkaffae2b2002-08-17 09:36:01 +0000625 rh.devnum = 0;
626 usb_init_skel();
627 reset_hc();
628 start_hc();
629 irq_install_handler(irqvec, (interrupt_handler_t *)handle_usb_interrupt, NULL);
630 return 0;
631}
632
633/* stop uhci
634 */
635int usb_lowlevel_stop(void)
636{
637 if(irqvec==-1)
638 return 1;
639 irq_free_handler(irqvec);
640 reset_hc();
Wolfgang Denkd0ff51b2008-07-14 15:19:07 +0200641 irqvec = -1;
wdenkaffae2b2002-08-17 09:36:01 +0000642 return 0;
643}
644
645/*******************************************************************************************
646 * Virtual Root Hub
647 * Since the uhci does not have a real HUB, we simulate one ;-)
648 */
649#undef USB_RH_DEBUG
650
651#ifdef USB_RH_DEBUG
652#define USB_RH_PRINTF(fmt,args...) printf (fmt ,##args)
653static void usb_display_wValue(unsigned short wValue,unsigned short wIndex);
654static void usb_display_Req(unsigned short req);
655#else
656#define USB_RH_PRINTF(fmt,args...)
657static void usb_display_wValue(unsigned short wValue,unsigned short wIndex) {}
658static void usb_display_Req(unsigned short req) {}
659#endif
660
661static unsigned char root_hub_dev_des[] =
662{
663 0x12, /* __u8 bLength; */
664 0x01, /* __u8 bDescriptorType; Device */
665 0x00, /* __u16 bcdUSB; v1.0 */
666 0x01,
667 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
668 0x00, /* __u8 bDeviceSubClass; */
669 0x00, /* __u8 bDeviceProtocol; */
670 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
671 0x00, /* __u16 idVendor; */
672 0x00,
673 0x00, /* __u16 idProduct; */
674 0x00,
675 0x00, /* __u16 bcdDevice; */
676 0x00,
677 0x01, /* __u8 iManufacturer; */
678 0x00, /* __u8 iProduct; */
679 0x00, /* __u8 iSerialNumber; */
680 0x01 /* __u8 bNumConfigurations; */
681};
682
683
684/* Configuration descriptor */
685static unsigned char root_hub_config_des[] =
686{
687 0x09, /* __u8 bLength; */
688 0x02, /* __u8 bDescriptorType; Configuration */
689 0x19, /* __u16 wTotalLength; */
690 0x00,
691 0x01, /* __u8 bNumInterfaces; */
692 0x01, /* __u8 bConfigurationValue; */
693 0x00, /* __u8 iConfiguration; */
694 0x40, /* __u8 bmAttributes;
695 Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
696 0x00, /* __u8 MaxPower; */
697
698 /* interface */
699 0x09, /* __u8 if_bLength; */
700 0x04, /* __u8 if_bDescriptorType; Interface */
701 0x00, /* __u8 if_bInterfaceNumber; */
702 0x00, /* __u8 if_bAlternateSetting; */
703 0x01, /* __u8 if_bNumEndpoints; */
704 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
705 0x00, /* __u8 if_bInterfaceSubClass; */
706 0x00, /* __u8 if_bInterfaceProtocol; */
707 0x00, /* __u8 if_iInterface; */
708
709 /* endpoint */
710 0x07, /* __u8 ep_bLength; */
711 0x05, /* __u8 ep_bDescriptorType; Endpoint */
712 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
713 0x03, /* __u8 ep_bmAttributes; Interrupt */
714 0x08, /* __u16 ep_wMaxPacketSize; 8 Bytes */
715 0x00,
716 0xff /* __u8 ep_bInterval; 255 ms */
717};
718
719
720static unsigned char root_hub_hub_des[] =
721{
722 0x09, /* __u8 bLength; */
723 0x29, /* __u8 bDescriptorType; Hub-descriptor */
724 0x02, /* __u8 bNbrPorts; */
725 0x00, /* __u16 wHubCharacteristics; */
726 0x00,
727 0x01, /* __u8 bPwrOn2pwrGood; 2ms */
728 0x00, /* __u8 bHubContrCurrent; 0 mA */
729 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */
730 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */
731};
732
733static unsigned char root_hub_str_index0[] =
734{
735 0x04, /* __u8 bLength; */
736 0x03, /* __u8 bDescriptorType; String-descriptor */
737 0x09, /* __u8 lang ID */
738 0x04, /* __u8 lang ID */
739};
740
741static unsigned char root_hub_str_index1[] =
742{
743 28, /* __u8 bLength; */
744 0x03, /* __u8 bDescriptorType; String-descriptor */
745 'U', /* __u8 Unicode */
746 0, /* __u8 Unicode */
747 'H', /* __u8 Unicode */
748 0, /* __u8 Unicode */
749 'C', /* __u8 Unicode */
750 0, /* __u8 Unicode */
751 'I', /* __u8 Unicode */
752 0, /* __u8 Unicode */
753 ' ', /* __u8 Unicode */
754 0, /* __u8 Unicode */
755 'R', /* __u8 Unicode */
756 0, /* __u8 Unicode */
757 'o', /* __u8 Unicode */
758 0, /* __u8 Unicode */
759 'o', /* __u8 Unicode */
760 0, /* __u8 Unicode */
761 't', /* __u8 Unicode */
762 0, /* __u8 Unicode */
763 ' ', /* __u8 Unicode */
764 0, /* __u8 Unicode */
765 'H', /* __u8 Unicode */
766 0, /* __u8 Unicode */
767 'u', /* __u8 Unicode */
768 0, /* __u8 Unicode */
769 'b', /* __u8 Unicode */
770 0, /* __u8 Unicode */
771};
772
773
774/*
775 * Root Hub Control Pipe (interrupt Pipes are not supported)
776 */
777
778
779int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len,struct devrequest *cmd)
780{
781 void *data = buffer;
782 int leni = transfer_len;
783 int len = 0;
784 int status = 0;
785 int stat = 0;
786 int i;
787
788 unsigned short cstatus;
789
790 unsigned short bmRType_bReq;
791 unsigned short wValue;
792 unsigned short wIndex;
793 unsigned short wLength;
794
Remy Bohmer9dbc3662008-10-10 10:23:22 +0200795 if (usb_pipeint(pipe)) {
wdenkaffae2b2002-08-17 09:36:01 +0000796 printf("Root-Hub submit IRQ: NOT implemented\n");
797#if 0
798 uhci->rh.urb = urb;
799 uhci->rh.send = 1;
800 uhci->rh.interval = urb->interval;
801 rh_init_int_timer (urb);
802#endif
803 return 0;
804 }
805 bmRType_bReq = cmd->requesttype | cmd->request << 8;
806 wValue = swap_16(cmd->value);
807 wIndex = swap_16(cmd->index);
808 wLength = swap_16(cmd->length);
809 usb_display_Req(bmRType_bReq);
810 for (i = 0; i < 8; i++)
811 rh.c_p_r[i] = 0;
812 USB_RH_PRINTF("Root-Hub: adr: %2x cmd(%1x): %02x%02x %04x %04x %04x\n",
813 dev->devnum, 8, cmd->requesttype,cmd->request, wValue, wIndex, wLength);
814
815 switch (bmRType_bReq) {
816 /* Request Destination:
817 without flags: Device,
818 RH_INTERFACE: interface,
819 RH_ENDPOINT: endpoint,
820 RH_CLASS means HUB here,
821 RH_OTHER | RH_CLASS almost ever means HUB_PORT here
822 */
823
824 case RH_GET_STATUS:
825 *(unsigned short *) data = swap_16(1);
826 len=2;
827 break;
828 case RH_GET_STATUS | RH_INTERFACE:
829 *(unsigned short *) data = swap_16(0);
830 len=2;
831 break;
832 case RH_GET_STATUS | RH_ENDPOINT:
833 *(unsigned short *) data = swap_16(0);
834 len=2;
835 break;
836 case RH_GET_STATUS | RH_CLASS:
837 *(unsigned long *) data = swap_32(0);
838 len=4;
839 break; /* hub power ** */
840 case RH_GET_STATUS | RH_OTHER | RH_CLASS:
841
842 status = in16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1));
843 cstatus = ((status & USBPORTSC_CSC) >> (1 - 0)) |
844 ((status & USBPORTSC_PEC) >> (3 - 1)) |
845 (rh.c_p_r[wIndex - 1] << (0 + 4));
846 status = (status & USBPORTSC_CCS) |
847 ((status & USBPORTSC_PE) >> (2 - 1)) |
848 ((status & USBPORTSC_SUSP) >> (12 - 2)) |
849 ((status & USBPORTSC_PR) >> (9 - 4)) |
850 (1 << 8) | /* power on ** */
851 ((status & USBPORTSC_LSDA) << (-8 + 9));
852
853 *(unsigned short *) data = swap_16(status);
854 *(unsigned short *) (data + 2) = swap_16(cstatus);
855 len=4;
856 break;
857 case RH_CLEAR_FEATURE | RH_ENDPOINT:
858 switch (wValue) {
859 case (RH_ENDPOINT_STALL):
860 len=0;
861 break;
862 }
863 break;
864
865 case RH_CLEAR_FEATURE | RH_CLASS:
866 switch (wValue) {
867 case (RH_C_HUB_OVER_CURRENT):
868 len=0; /* hub power over current ** */
869 break;
870 }
871 break;
872
873 case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
874 usb_display_wValue(wValue,wIndex);
875 switch (wValue) {
876 case (RH_PORT_ENABLE):
877 status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
878 status = (status & 0xfff5) & ~USBPORTSC_PE;
879 out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
880 len=0;
881 break;
882 case (RH_PORT_SUSPEND):
883 status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
884 status = (status & 0xfff5) & ~USBPORTSC_SUSP;
885 out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
886 len=0;
887 break;
888 case (RH_PORT_POWER):
889 len=0; /* port power ** */
890 break;
891 case (RH_C_PORT_CONNECTION):
892 status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
893 status = (status & 0xfff5) | USBPORTSC_CSC;
894 out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
895 len=0;
896 break;
897 case (RH_C_PORT_ENABLE):
898 status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
899 status = (status & 0xfff5) | USBPORTSC_PEC;
900 out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
901 len=0;
902 break;
903 case (RH_C_PORT_SUSPEND):
904/*** WR_RH_PORTSTAT(RH_PS_PSSC); */
905 len=0;
906 break;
907 case (RH_C_PORT_OVER_CURRENT):
908 len=0;
909 break;
910 case (RH_C_PORT_RESET):
911 rh.c_p_r[wIndex - 1] = 0;
912 len=0;
913 break;
914 }
915 break;
916 case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
917 usb_display_wValue(wValue,wIndex);
918 switch (wValue) {
919 case (RH_PORT_SUSPEND):
920 status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
921 status = (status & 0xfff5) | USBPORTSC_SUSP;
922 out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
923 len=0;
924 break;
925 case (RH_PORT_RESET):
926 status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
927 status = (status & 0xfff5) | USBPORTSC_PR;
928 out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
929 wait_ms(10);
930 status = (status & 0xfff5) & ~USBPORTSC_PR;
931 out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
932 udelay(10);
933 status = (status & 0xfff5) | USBPORTSC_PE;
934 out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
935 wait_ms(10);
936 status = (status & 0xfff5) | 0xa;
937 out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
938 len=0;
939 break;
940 case (RH_PORT_POWER):
941 len=0; /* port power ** */
942 break;
943 case (RH_PORT_ENABLE):
944 status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
945 status = (status & 0xfff5) | USBPORTSC_PE;
946 out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
947 len=0;
948 break;
949 }
950 break;
951
952 case RH_SET_ADDRESS:
953 rh.devnum = wValue;
954 len=0;
955 break;
956 case RH_GET_DESCRIPTOR:
957 switch ((wValue & 0xff00) >> 8) {
958 case (0x01): /* device descriptor */
959 i=sizeof(root_hub_config_des);
960 status=i > wLength ? wLength : i;
961 len = leni > status ? status : leni;
962 memcpy (data, root_hub_dev_des, len);
963 break;
964 case (0x02): /* configuration descriptor */
965 i=sizeof(root_hub_config_des);
966 status=i > wLength ? wLength : i;
967 len = leni > status ? status : leni;
968 memcpy (data, root_hub_config_des, len);
969 break;
970 case (0x03): /*string descriptors */
971 if(wValue==0x0300) {
972 i=sizeof(root_hub_str_index0);
973 status = i > wLength ? wLength : i;
974 len = leni > status ? status : leni;
975 memcpy (data, root_hub_str_index0, len);
976 break;
977 }
978 if(wValue==0x0301) {
979 i=sizeof(root_hub_str_index1);
980 status = i > wLength ? wLength : i;
981 len = leni > status ? status : leni;
982 memcpy (data, root_hub_str_index1, len);
983 break;
984 }
985 stat = USB_ST_STALLED;
986 }
987 break;
988
989 case RH_GET_DESCRIPTOR | RH_CLASS:
990 root_hub_hub_des[2] = 2;
991 i=sizeof(root_hub_hub_des);
992 status= i > wLength ? wLength : i;
993 len = leni > status ? status : leni;
994 memcpy (data, root_hub_hub_des, len);
995 break;
996 case RH_GET_CONFIGURATION:
997 *(unsigned char *) data = 0x01;
998 len = 1;
999 break;
1000 case RH_SET_CONFIGURATION:
1001 len=0;
1002 break;
1003 default:
1004 stat = USB_ST_STALLED;
1005 }
1006 USB_RH_PRINTF("Root-Hub stat %lx port1: %x port2: %x\n\n",stat,
1007 in16r(usb_base_addr + USBPORTSC1), in16r(usb_base_addr + USBPORTSC2));
1008 dev->act_len=len;
1009 dev->status=stat;
1010 return stat;
1011
1012}
1013
1014/********************************************************************************
1015 * Some Debug Routines
1016 */
1017
1018#ifdef USB_RH_DEBUG
1019
1020static void usb_display_Req(unsigned short req)
1021{
1022 USB_RH_PRINTF("- Root-Hub Request: ");
1023 switch (req) {
1024 case RH_GET_STATUS:
1025 USB_RH_PRINTF("Get Status ");
1026 break;
1027 case RH_GET_STATUS | RH_INTERFACE:
1028 USB_RH_PRINTF("Get Status Interface ");
1029 break;
1030 case RH_GET_STATUS | RH_ENDPOINT:
1031 USB_RH_PRINTF("Get Status Endpoint ");
1032 break;
1033 case RH_GET_STATUS | RH_CLASS:
1034 USB_RH_PRINTF("Get Status Class");
1035 break; /* hub power ** */
1036 case RH_GET_STATUS | RH_OTHER | RH_CLASS:
1037 USB_RH_PRINTF("Get Status Class Others");
1038 break;
1039 case RH_CLEAR_FEATURE | RH_ENDPOINT:
1040 USB_RH_PRINTF("Clear Feature Endpoint ");
1041 break;
1042 case RH_CLEAR_FEATURE | RH_CLASS:
1043 USB_RH_PRINTF("Clear Feature Class ");
1044 break;
1045 case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
1046 USB_RH_PRINTF("Clear Feature Other Class ");
1047 break;
1048 case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
1049 USB_RH_PRINTF("Set Feature Other Class ");
1050 break;
1051 case RH_SET_ADDRESS:
1052 USB_RH_PRINTF("Set Address ");
1053 break;
1054 case RH_GET_DESCRIPTOR:
1055 USB_RH_PRINTF("Get Descriptor ");
1056 break;
1057 case RH_GET_DESCRIPTOR | RH_CLASS:
1058 USB_RH_PRINTF("Get Descriptor Class ");
1059 break;
1060 case RH_GET_CONFIGURATION:
1061 USB_RH_PRINTF("Get Configuration ");
1062 break;
1063 case RH_SET_CONFIGURATION:
1064 USB_RH_PRINTF("Get Configuration ");
1065 break;
1066 default:
1067 USB_RH_PRINTF("****UNKNOWN**** 0x%04X ",req);
1068 }
1069 USB_RH_PRINTF("\n");
1070
1071}
1072
1073static void usb_display_wValue(unsigned short wValue,unsigned short wIndex)
1074{
1075 switch (wValue) {
1076 case (RH_PORT_ENABLE):
1077 USB_RH_PRINTF("Root-Hub: Enable Port %d\n",wIndex);
1078 break;
1079 case (RH_PORT_SUSPEND):
1080 USB_RH_PRINTF("Root-Hub: Suspend Port %d\n",wIndex);
1081 break;
1082 case (RH_PORT_POWER):
1083 USB_RH_PRINTF("Root-Hub: Port Power %d\n",wIndex);
1084 break;
1085 case (RH_C_PORT_CONNECTION):
1086 USB_RH_PRINTF("Root-Hub: C Port Connection Port %d\n",wIndex);
1087 break;
1088 case (RH_C_PORT_ENABLE):
1089 USB_RH_PRINTF("Root-Hub: C Port Enable Port %d\n",wIndex);
1090 break;
1091 case (RH_C_PORT_SUSPEND):
1092 USB_RH_PRINTF("Root-Hub: C Port Suspend Port %d\n",wIndex);
1093 break;
1094 case (RH_C_PORT_OVER_CURRENT):
1095 USB_RH_PRINTF("Root-Hub: C Port Over Current Port %d\n",wIndex);
1096 break;
1097 case (RH_C_PORT_RESET):
1098 USB_RH_PRINTF("Root-Hub: C Port reset Port %d\n",wIndex);
1099 break;
1100 default:
1101 USB_RH_PRINTF("Root-Hub: unknown %x %x\n",wValue,wIndex);
1102 break;
1103 }
1104}
1105
1106#endif
1107
1108
wdenkaffae2b2002-08-17 09:36:01 +00001109#ifdef USB_UHCI_DEBUG
1110
1111static int usb_display_td(uhci_td_t *td)
1112{
1113 unsigned long tmp;
1114 int valid;
1115
1116 printf("TD at %p:\n",td);
1117
1118 tmp=swap_32(td->link);
1119 printf("Link points to 0x%08lX, %s first, %s, %s\n",tmp&0xfffffff0,
1120 ((tmp & 0x4)==0x4) ? "Depth" : "Breath",
1121 ((tmp & 0x2)==0x2) ? "QH" : "TD",
1122 ((tmp & 0x1)==0x1) ? "invalid" : "valid");
1123 valid=((tmp & 0x1)==0x0);
1124 tmp=swap_32(td->status);
1125 printf(" %s %ld Errors %s %s %s \n %s %s %s %s %s %s\n Len 0x%lX\n",
1126 (((tmp>>29)&0x1)==0x1) ? "SPD Enable" : "SPD Disable",
1127 ((tmp>>28)&0x3),
1128 (((tmp>>26)&0x1)==0x1) ? "Low Speed" : "Full Speed",
1129 (((tmp>>25)&0x1)==0x1) ? "ISO " : "",
1130 (((tmp>>24)&0x1)==0x1) ? "IOC " : "",
1131 (((tmp>>23)&0x1)==0x1) ? "Active " : "Inactive ",
1132 (((tmp>>22)&0x1)==0x1) ? "Stalled" : "",
1133 (((tmp>>21)&0x1)==0x1) ? "Data Buffer Error" : "",
1134 (((tmp>>20)&0x1)==0x1) ? "Babble" : "",
1135 (((tmp>>19)&0x1)==0x1) ? "NAK" : "",
1136 (((tmp>>18)&0x1)==0x1) ? "Bitstuff Error" : "",
1137 (tmp&0x7ff));
1138 tmp=swap_32(td->info);
1139 printf(" MaxLen 0x%lX\n",((tmp>>21)&0x7FF));
1140 printf(" %s Endpoint 0x%lX Dev Addr 0x%lX PID 0x%lX\n",((tmp>>19)&0x1)==0x1 ? "TOGGLE" : "",
1141 ((tmp>>15)&0xF),((tmp>>8)&0x7F),tmp&0xFF);
1142 tmp=swap_32(td->buffer);
1143 printf(" Buffer 0x%08lX\n",tmp);
1144 printf(" DEV %08lX\n",td->dev_ptr);
1145 return valid;
1146}
1147
1148
1149void usb_show_td(int max)
1150{
1151 int i;
1152 if(max>0) {
1153 for(i=0;i<max;i++) {
1154 usb_display_td(&tmp_td[i]);
1155 }
1156 }
1157 else {
1158 i=0;
1159 do {
1160 printf("tmp_td[%d]\n",i);
1161 }while(usb_display_td(&tmp_td[i++]));
1162 }
1163}
1164
1165
1166#endif
1167#endif /* CONFIG_USB_UHCI */
1168
1169/* EOF */