blob: 130487987656086b3f9a620e352d11167f589264 [file] [log] [blame]
Akshay Bhatf9162b12016-01-29 15:16:40 -05001/*
2 * Copyright (C) 2015 Timesys Corporation
3 * Copyright (C) 2015 General Electric Company
4 * Copyright (C) 2014 Advantech
5 * Copyright (C) 2012 Freescale Semiconductor, Inc.
6 *
7 * Configuration settings for the GE MX6Q Bx50v3 boards.
8 *
9 * SPDX-License-Identifier: GPL-2.0+
10 */
11
12#ifndef __GE_BX50V3_CONFIG_H
13#define __GE_BX50V3_CONFIG_H
14
15#include <asm/arch/imx-regs.h>
16#include <asm/imx-common/gpio.h>
17
18#if defined(CONFIG_TARGET_GE_B450V3)
19#define CONFIG_BOARD_NAME "General Electric B450v3"
20#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b450v3.dtb"
21#elif defined(CONFIG_TARGET_GE_B650V3)
22#define CONFIG_BOARD_NAME "General Electric B650v3"
23#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b650v3.dtb"
24#elif defined(CONFIG_TARGET_GE_B850V3)
25#define CONFIG_BOARD_NAME "General Electric B850v3"
26#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b850v3.dtb"
27#else
28#define CONFIG_BOARD_NAME "General Electric BA16 Generic"
29#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-ba16.dtb"
30#endif
31
32#define CONFIG_MXC_UART_BASE UART3_BASE
33#define CONFIG_CONSOLE_DEV "ttymxc2"
34
35#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
36
37#define CONFIG_SUPPORT_EMMC_BOOT
38
39#define CONFIG_BOOTDELAY 1
40
41#include "mx6_common.h"
42#include <linux/sizes.h>
43
44#define CONFIG_DISPLAY_CPUINFO
45#define CONFIG_DISPLAY_BOARDINFO
46
47#define CONFIG_CMDLINE_TAG
48#define CONFIG_SETUP_MEMORY_TAGS
49#define CONFIG_INITRD_TAG
50#define CONFIG_REVISION_TAG
51#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
52
53#define CONFIG_BOARD_EARLY_INIT_F
54#define CONFIG_BOARD_LATE_INIT
55
56#define CONFIG_MXC_GPIO
57#define CONFIG_MXC_UART
58
59#define CONFIG_CMD_FUSE
60#define CONFIG_MXC_OCOTP
61
62/* SATA Configs */
63#define CONFIG_CMD_SATA
64#define CONFIG_DWC_AHSATA
65#define CONFIG_SYS_SATA_MAX_DEVICE 1
66#define CONFIG_DWC_AHSATA_PORT_ID 0
67#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
68#define CONFIG_LBA48
69#define CONFIG_LIBATA
70
71/* MMC Configs */
72#define CONFIG_FSL_ESDHC
73#define CONFIG_FSL_USDHC
74#define CONFIG_SYS_FSL_ESDHC_ADDR 0
75#define CONFIG_MMC
Akshay Bhatf9162b12016-01-29 15:16:40 -050076#define CONFIG_GENERIC_MMC
77#define CONFIG_BOUNCE_BUFFER
Akshay Bhatf9162b12016-01-29 15:16:40 -050078#define CONFIG_DOS_PARTITION
79
80/* USB Configs */
Akshay Bhatf9162b12016-01-29 15:16:40 -050081#define CONFIG_USB_EHCI
82#define CONFIG_USB_EHCI_MX6
83#define CONFIG_USB_STORAGE
84#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
85#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
86#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
87#define CONFIG_MXC_USB_FLAGS 0
88#define CONFIG_USB_KEYBOARD
89#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
90
91#define CONFIG_CI_UDC
92#define CONFIG_USBD_HS
93#define CONFIG_USB_GADGET_DUALSPEED
94#define CONFIG_USB_GADGET
95#define CONFIG_USB_GADGET_DOWNLOAD
Akshay Bhatf9162b12016-01-29 15:16:40 -050096#define CONFIG_USB_GADGET_MASS_STORAGE
97#define CONFIG_USB_FUNCTION_MASS_STORAGE
98#define CONFIG_USB_GADGET_VBUS_DRAW 2
99#define CONFIG_G_DNL_VENDOR_NUM 0x0525
100#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
101#define CONFIG_G_DNL_MANUFACTURER "Advantech"
102
103/* Networking Configs */
Akshay Bhatf9162b12016-01-29 15:16:40 -0500104#define CONFIG_FEC_MXC
105#define CONFIG_MII
106#define IMX_FEC_BASE ENET_BASE_ADDR
107#define CONFIG_FEC_XCV_TYPE RGMII
108#define CONFIG_ETHPRIME "FEC"
109#define CONFIG_FEC_MXC_PHYADDR 4
110#define CONFIG_PHYLIB
111#define CONFIG_PHY_ATHEROS
112
113/* Serial Flash */
Akshay Bhatf9162b12016-01-29 15:16:40 -0500114#ifdef CONFIG_CMD_SF
115#define CONFIG_MXC_SPI
116#define CONFIG_SF_DEFAULT_BUS 0
117#define CONFIG_SF_DEFAULT_CS 0
118#define CONFIG_SF_DEFAULT_SPEED 20000000
119#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
120#endif
121
122/* allow to overwrite serial and ethaddr */
123#define CONFIG_ENV_OVERWRITE
124#define CONFIG_CONS_INDEX 1
125#define CONFIG_BAUDRATE 115200
126
127/* Command definition */
128#define CONFIG_CMD_BMODE
Akshay Bhatf9162b12016-01-29 15:16:40 -0500129
130#define CONFIG_LOADADDR 0x12000000
131#define CONFIG_SYS_TEXT_BASE 0x17800000
132
133#define CONFIG_EXTRA_ENV_SETTINGS \
134 "script=boot.scr\0" \
135 "image=/boot/uImage\0" \
136 "uboot=u-boot.imx\0" \
137 "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
138 "fdt_addr=0x18000000\0" \
139 "boot_fdt=yes\0" \
140 "ip_dyn=yes\0" \
141 "console=" CONFIG_CONSOLE_DEV "\0" \
142 "fdt_high=0xffffffff\0" \
143 "initrd_high=0xffffffff\0" \
144 "sddev=0\0" \
145 "emmcdev=1\0" \
146 "partnum=1\0" \
147 "update_sd_firmware=" \
148 "if test ${ip_dyn} = yes; then " \
149 "setenv get_cmd dhcp; " \
150 "else " \
151 "setenv get_cmd tftp; " \
152 "fi; " \
153 "if mmc dev ${mmcdev}; then " \
154 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
155 "setexpr fw_sz ${filesize} / 0x200; " \
156 "setexpr fw_sz ${fw_sz} + 1; " \
157 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
158 "fi; " \
159 "fi\0" \
160 "update_sf_uboot=" \
161 "if tftp $loadaddr $uboot; then " \
162 "sf probe; " \
163 "sf erase 0 0xC0000; " \
164 "sf write $loadaddr 0x400 $filesize; " \
165 "echo 'U-Boot upgraded. Please reset'; " \
166 "fi\0" \
167 "setargs=setenv bootargs console=${console},${baudrate} " \
168 "root=/dev/${rootdev} rw rootwait cma=128M\0" \
169 "loadbootscript=" \
170 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
171 "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
172 " source\0" \
173 "loadimage=" \
174 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
175 "loadfdt=ext2load ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
176 "tryboot=" \
177 "if run loadbootscript; then " \
178 "run bootscript; " \
179 "else " \
180 "if run loadimage; then " \
181 "run doboot; " \
182 "fi; " \
183 "fi;\0" \
184 "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
185 "run setargs; " \
186 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
187 "if run loadfdt; then " \
188 "bootm ${loadaddr} - ${fdt_addr}; " \
189 "else " \
190 "if test ${boot_fdt} = try; then " \
191 "bootm; " \
192 "else " \
193 "echo WARN: Cannot load the DT; " \
194 "fi; " \
195 "fi; " \
196 "else " \
197 "bootm; " \
198 "fi;\0" \
199 "netargs=setenv bootargs console=${console},${baudrate} " \
200 "root=/dev/nfs " \
201 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
202 "netboot=echo Booting from net ...; " \
203 "run netargs; " \
204 "if test ${ip_dyn} = yes; then " \
205 "setenv get_cmd dhcp; " \
206 "else " \
207 "setenv get_cmd tftp; " \
208 "fi; " \
209 "${get_cmd} ${image}; " \
210 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
211 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
212 "bootm ${loadaddr} - ${fdt_addr}; " \
213 "else " \
214 "if test ${boot_fdt} = try; then " \
215 "bootm; " \
216 "else " \
217 "echo WARN: Cannot load the DT; " \
218 "fi; " \
219 "fi; " \
220 "else " \
221 "bootm; " \
222 "fi;\0" \
223
224#define CONFIG_BOOTCOMMAND \
225 "usb start; " \
226 "setenv dev usb; " \
227 "setenv devnum 0; " \
228 "setenv rootdev sda1; " \
229 "run tryboot; " \
230 \
231 "setenv dev mmc; " \
232 "setenv rootdev mmcblk0p1; " \
233 \
234 "setenv devnum ${sddev}; " \
235 "if mmc dev ${devnum}; then " \
236 "run tryboot; " \
237 "setenv rootdev mmcblk1p1; " \
238 "fi; " \
239 \
240 "setenv devnum ${emmcdev}; " \
241 "if mmc dev ${devnum}; then " \
242 "run tryboot; " \
243 "fi; " \
244 \
245 "bmode usb; " \
246
247#define CONFIG_ARP_TIMEOUT 200UL
248
249/* Miscellaneous configurable options */
250#define CONFIG_SYS_LONGHELP
Akshay Bhatf9162b12016-01-29 15:16:40 -0500251#define CONFIG_AUTO_COMPLETE
252
253/* Print Buffer Size */
254#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
255#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
256
257#define CONFIG_SYS_MEMTEST_START 0x10000000
258#define CONFIG_SYS_MEMTEST_END 0x10010000
259#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
260
261#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
262
263#define CONFIG_CMDLINE_EDITING
264#define CONFIG_STACKSIZE (128 * 1024)
265
266/* Physical Memory Map */
267#define CONFIG_NR_DRAM_BANKS 1
268#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
269
270#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
271#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
272#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
273
274#define CONFIG_SYS_INIT_SP_OFFSET \
275 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
276#define CONFIG_SYS_INIT_SP_ADDR \
277 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
278
279/* FLASH and environment organization */
280#define CONFIG_SYS_NO_FLASH
281
282#define CONFIG_ENV_IS_IN_SPI_FLASH
283#define CONFIG_ENV_SIZE (8 * 1024)
284#define CONFIG_ENV_OFFSET (768 * 1024)
285#define CONFIG_ENV_SECT_SIZE (64 * 1024)
286#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
287#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
288#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
289#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
290
Akshay Bhatf9162b12016-01-29 15:16:40 -0500291#ifndef CONFIG_SYS_DCACHE_OFF
Akshay Bhatf9162b12016-01-29 15:16:40 -0500292#endif
293
294#define CONFIG_SYS_FSL_USDHC_NUM 3
295
296/* Framebuffer */
297#define CONFIG_VIDEO
298#define CONFIG_VIDEO_IPUV3
299#define CONFIG_CFB_CONSOLE
300#define CONFIG_VGA_AS_SINGLE_DEVICE
301#define CONFIG_SYS_CONSOLE_IS_IN_ENV
302#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
303#define CONFIG_VIDEO_BMP_RLE8
304#define CONFIG_SPLASH_SCREEN
305#define CONFIG_SPLASH_SCREEN_ALIGN
306#define CONFIG_BMP_16BPP
307#define CONFIG_VIDEO_LOGO
308#define CONFIG_VIDEO_BMP_LOGO
309#define CONFIG_IPUV3_CLK 260000000
310#define CONFIG_IMX_HDMI
311#define CONFIG_IMX_VIDEO_SKIP
312
Akshay Bhat54971ac2016-04-12 18:13:59 -0400313#define CONFIG_PWM_IMX
314#define CONFIG_IMX6_PWM_PER_CLK 66000000
315
Akshay Bhatf9162b12016-01-29 15:16:40 -0500316#undef CONFIG_CMD_PCI
317#ifdef CONFIG_CMD_PCI
318#define CONFIG_PCI
319#define CONFIG_PCI_PNP
320#define CONFIG_PCI_SCAN_SHOW
321#define CONFIG_PCIE_IMX
322#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
323#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
324#endif
325
326/* I2C Configs */
Akshay Bhatf9162b12016-01-29 15:16:40 -0500327#define CONFIG_SYS_I2C
328#define CONFIG_SYS_I2C_MXC
329#define CONFIG_SYS_I2C_SPEED 100000
330#define CONFIG_SYS_I2C_MXC_I2C1
331#define CONFIG_SYS_I2C_MXC_I2C2
332#define CONFIG_SYS_I2C_MXC_I2C3
333
334#endif /* __GE_BX50V3_CONFIG_H */