blob: b50cba556cf79dfe77d3a7e6ab9836d259859b6f [file] [log] [blame]
Stefan Roese779e9752007-08-14 14:44:41 +02001/*
2 * (C) Copyright 2007
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/************************************************************************
25 * zeus.h - configuration for Zeus board
26 ***********************************************************************/
27#ifndef __CONFIG_H
28#define __CONFIG_H
29
30/*-----------------------------------------------------------------------
31 * High Level Configuration Options
32 *----------------------------------------------------------------------*/
33#define CONFIG_ZEUS 1 /* Board is Zeus */
34#define CONFIG_4xx 1 /* ... PPC4xx family */
35#define CONFIG_405EP 1 /* Specifc 405EP support*/
36
37#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
38
39#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
40#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
41
42#define PLLMR0_DEFAULT PLLMR0_333_111_55_111
43#define PLLMR1_DEFAULT PLLMR1_333_111_55_111
44
45#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
46
47#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
48
49#define CONFIG_MII 1 /* MII PHY management */
50#define CONFIG_PHY_ADDR 0x01 /* PHY address */
51#define CONFIG_HAS_ETH1 1
52#define CONFIG_PHY1_ADDR 0x11 /* EMAC1 PHY address */
53#define CONFIG_NET_MULTI 1
54#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
55#define CONFIG_PHY_RESET 1
56#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */
57
Stefan Roese3b3bff42007-08-14 16:36:29 +020058/*
59 * BOOTP options
60 */
61#define CONFIG_BOOTP_BOOTFILESIZE
62#define CONFIG_BOOTP_BOOTPATH
63#define CONFIG_BOOTP_GATEWAY
64#define CONFIG_BOOTP_HOSTNAME
65
66/*
67 * Command line configuration.
68 */
69#include <config_cmd_default.h>
70
71#define CONFIG_CMD_ASKENV
72#define CONFIG_CMD_CACHE
73#define CONFIG_CMD_DHCP
74#define CONFIG_CMD_DIAG
75#define CONFIG_CMD_EEPROM
76#define CONFIG_CMD_ELF
77#define CONFIG_CMD_I2C
78#define CONFIG_CMD_IRQ
79#define CONFIG_CMD_LOG
80#define CONFIG_CMD_MII
81#define CONFIG_CMD_NET
82#define CONFIG_CMD_NFS
83#define CONFIG_CMD_PING
84#define CONFIG_CMD_REGINFO
Stefan Roese779e9752007-08-14 14:44:41 +020085
86/* POST support */
87#define CONFIG_POST (CFG_POST_MEMORY | \
88 CFG_POST_CPU | \
89 CFG_POST_CACHE | \
90 CFG_POST_UART | \
91 CFG_POST_ETHER)
92
93#define CFG_POST_ETHER_EXT_LOOPBACK /* eth POST using ext loopack connector */
94
95/* Define here the base-addresses of the UARTs to test in POST */
96#define CFG_POST_UART_TABLE {UART0_BASE}
97
98#define CONFIG_LOGBUFFER
99#define CFG_POST_CACHE_ADDR 0x00800000 /* free virtual address */
100
101#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
102
Stefan Roese779e9752007-08-14 14:44:41 +0200103#undef CONFIG_WATCHDOG /* watchdog disabled */
104
105/*-----------------------------------------------------------------------
106 * SDRAM
107 *----------------------------------------------------------------------*/
108/*
109 * SDRAM configuration (please see cpu/ppc/sdram.[ch])
110 */
111#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
112#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */
113
114/* SDRAM timings used in datasheet */
115#define CFG_SDRAM_CL 3 /* CAS latency */
116#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */
117#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */
118#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
119#define CFG_SDRAM_tRFC 66 /* Auto refresh period */
120
121/*-----------------------------------------------------------------------
122 * Serial Port
123 *----------------------------------------------------------------------*/
124#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
125#define CFG_BASE_BAUD 691200
126#define CONFIG_BAUDRATE 115200
127#define CONFIG_SERIAL_MULTI
128
129/* The following table includes the supported baudrates */
130#define CFG_BAUDRATE_TABLE \
131 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
132
133/*-----------------------------------------------------------------------
134 * Miscellaneous configurable options
135 *----------------------------------------------------------------------*/
136#define CFG_LONGHELP /* undef to save memory */
137#define CFG_PROMPT "=> " /* Monitor Command Prompt */
Stefan Roese3b3bff42007-08-14 16:36:29 +0200138#if defined(CONFIG_CMD_KGDB)
Stefan Roese779e9752007-08-14 14:44:41 +0200139#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
140#else
141#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
142#endif
143#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
144#define CFG_MAXARGS 16 /* max number of command args */
145#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
146
147#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
148#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
149
150#define CFG_LOAD_ADDR 0x100000 /* default load address */
151#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
152
153#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
154
155#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
156#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
157
158#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
159#define CONFIG_LOOPW 1 /* enable loopw command */
160#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
161#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
162#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
163
164/*-----------------------------------------------------------------------
165 * I2C
166 *----------------------------------------------------------------------*/
167#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
168#undef CONFIG_SOFT_I2C /* I2C bit-banged */
169#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
170#define CFG_I2C_SLAVE 0x7F
171
172/* these are for the ST M24C02 2kbit serial i2c eeprom */
173#define CFG_I2C_EEPROM_ADDR 0x50 /* base address */
174#define CFG_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
175/* mask of address bits that overflow into the "EEPROM chip address" */
176#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
177
178#define CFG_EEPROM_PAGE_WRITE_ENABLE 1 /* write eeprom in pages */
179#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* 8 byte write page size */
180#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
181
182/*
183 * The layout of the I2C EEPROM, used for bootstrap setup and for board-
184 * specific values, like ethaddr... that can be restored via the sw-reset
185 * button
186 */
187#define FACTORY_RESET_I2C_EEPROM 0x50
188#define FACTORY_RESET_ENV_OFFS 0x80
189#define FACTORY_RESET_ENV_SIZE 0x80
190
191/*-----------------------------------------------------------------------
192 * Start addresses for the final memory configuration
193 * (Set up by the startup code)
194 * Please note that CFG_SDRAM_BASE _must_ start at 0
195 */
196#define CFG_SDRAM_BASE 0x00000000
197#define CFG_FLASH_BASE 0xFF000000
198#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
199#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
200#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
201
202/*
203 * For booting Linux, the board info and command line data
204 * have to be in the first 8 MB of memory, since this is
205 * the maximum mapped by the Linux kernel during initialization.
206 */
207#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
208
209/*-----------------------------------------------------------------------
210 * FLASH organization
211 */
212#define CFG_FLASH_CFI /* The flash is CFI compatible */
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200213#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
Stefan Roese779e9752007-08-14 14:44:41 +0200214
215#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
216
217#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
218#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
219
220#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
221#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
222
223#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
224#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */
225
226#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
227#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
228
229#ifdef CFG_ENV_IS_IN_FLASH
230#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
231#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
232#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
233
234/* Address and size of Redundant Environment Sector */
235#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
236#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
237#endif
238
239/*-----------------------------------------------------------------------
Stefan Roese779e9752007-08-14 14:44:41 +0200240 * Definitions for initial stack pointer and data area (in data cache)
241 */
242/* use on chip memory (OCM) for temperary stack until sdram is tested */
243#define CFG_TEMP_STACK_OCM 1
244
245/* On Chip Memory location */
246#define CFG_OCM_DATA_ADDR 0xF8000000
247#define CFG_OCM_DATA_SIZE 0x1000
248#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of OCM */
249#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
250
251#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
252#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
253/* reserve some memory for POST and BOOT limit info */
254#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 16)
255
256/* extra data in OCM */
257#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
258#define CFG_POST_MAGIC (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 8)
259#define CFG_POST_VAL (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 12)
260
261/*-----------------------------------------------------------------------
262 * External Bus Controller (EBC) Setup
263 */
264
265/* Memory Bank 0 (Flash 16M) initialization */
266#define CFG_EBC_PB0AP 0x05815600
267#define CFG_EBC_PB0CR 0xFF09A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit */
268
269/*-----------------------------------------------------------------------
270 * Definitions for GPIO setup (PPC405EP specific)
271 *
272 * GPIO0[0] - External Bus Controller BLAST output
273 * GPIO0[1-9] - Instruction trace outputs
274 * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
275 * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs
276 * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
277 * GPIO0[24-27] - UART0 control signal inputs/outputs
278 * GPIO0[28-29] - UART1 data signal input/output
279 * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
280 */
281#define CFG_GPIO0_OSRH 0x15555550 /* Chip selects */
282#define CFG_GPIO0_OSRL 0x00000110 /* UART_DTR-pin 27 alt out */
283#define CFG_GPIO0_ISR1H 0x10000041 /* Pin 2, 12 is input */
284#define CFG_GPIO0_ISR1L 0x15505440 /* OUT: LEDs 22/23; IN: pin12,2, NVALID# */
285#define CFG_GPIO0_TSRH 0x00000000
286#define CFG_GPIO0_TSRL 0x00000000
287#define CFG_GPIO0_TCR 0xBFF68317 /* 3-state OUT: 22/23/29; 12,2 is not 3-state */
288#define CFG_GPIO0_ODR 0x00000000
289
290#define CFG_GPIO_SW_RESET 1
291#define CFG_GPIO_ZEUS_PE 12
292#define CFG_GPIO_LED_RED 22
293#define CFG_GPIO_LED_GREEN 23
294
295/* Time in milli-seconds */
296#define CFG_TIME_POST 5000
297#define CFG_TIME_FACTORY_RESET 10000
298
299/*
300 * Internal Definitions
301 *
302 * Boot Flags
303 */
304#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
305#define BOOTFLAG_WARM 0x02 /* Software reboot */
306
Stefan Roese3b3bff42007-08-14 16:36:29 +0200307#if defined(CONFIG_CMD_KGDB)
Stefan Roese779e9752007-08-14 14:44:41 +0200308#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
309#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
310#endif
311
312/* ENVIRONMENT VARS */
313
314#define CONFIG_PREBOOT "echo;echo Welcome to Bulletendpoints board v1.1;echo"
315#define CONFIG_IPADDR 192.168.1.10
316#define CONFIG_SERVERIP 192.168.1.100
317#define CONFIG_GATEWAYIP 192.168.1.100
318#define CONFIG_ETHADDR 50:00:00:00:06:00
319#define CONFIG_ETH1ADDR 50:00:00:00:06:01
320#if 0
321#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
322#else
323#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
324#endif
325
326#define CONFIG_EXTRA_ENV_SETTINGS \
327 "logversion=2\0" \
328 "hostname=zeus\0" \
329 "netdev=eth0\0" \
330 "ethact=ppc_4xx_eth0\0" \
331 "netmask=255.255.255.0\0" \
332 "ramdisk_size=50000\0" \
333 "nfsargs=setenv bootargs root=/dev/nfs rw" \
334 " nfsroot=${serverip}:${rootpath}\0" \
335 "ramargs=setenv bootargs root=/dev/ram rw" \
Detlev Zundele5084af2008-02-22 17:21:32 +0100336 " ramdisk_size=${ramdisk_size}\0" \
Stefan Roese779e9752007-08-14 14:44:41 +0200337 "addip=setenv bootargs ${bootargs} " \
338 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
339 ":${hostname}:${netdev}:off panic=1\0" \
340 "addtty=setenv bootargs ${bootargs} console=ttyS0," \
341 "${baudrate}\0" \
342 "net_nfs=tftp ${kernel_mem_addr} ${file_kernel};" \
343 "run nfsargs addip addtty;bootm\0" \
344 "net_ram=tftp ${kernel_mem_addr} ${file_kernel};" \
345 "tftp ${ramdisk_mem_addr} ${file_fs};" \
346 "run ramargs addip addtty;" \
347 "bootm ${kernel_mem_addr} ${ramdisk_mem_addr}\0" \
348 "rootpath=/target_fs/zeus\0" \
349 "kernel_fl_addr=ff000000\0" \
350 "kernel_mem_addr=200000\0" \
351 "ramdisk_fl_addr=ff300000\0" \
352 "ramdisk_mem_addr=4000000\0" \
353 "uboot_fl_addr=fffc0000\0" \
354 "uboot_mem_addr=100000\0" \
355 "file_uboot=/zeus/u-boot.bin\0" \
356 "tftp_uboot=tftp 100000 ${file_uboot}\0" \
357 "update_uboot=protect off fffc0000 ffffffff;" \
358 "era fffc0000 ffffffff;cp.b 100000 fffc0000 40000;" \
359 "protect on fffc0000 ffffffff\0" \
360 "upd_uboot=run tftp_uboot;run update_uboot\0" \
361 "file_kernel=/zeus/uImage_ba\0" \
362 "tftp_kernel=tftp 100000 ${file_kernel}\0" \
363 "update_kernel=protect off ff000000 ff17ffff;" \
364 "era ff000000 ff17ffff;cp.b 100000 ff000000 180000\0" \
365 "upd_kernel=run tftp_kernel;run update_kernel\0" \
366 "file_fs=/zeus/rootfs_ba.img\0" \
367 "tftp_fs=tftp 100000 ${file_fs}\0" \
368 "update_fs=protect off ff300000 ff87ffff;era ff300000 ff87ffff;"\
369 "cp.b 100000 ff300000 580000\0" \
370 "upd_fs=run tftp_fs;run update_fs\0" \
371 "bootcmd=chkreset;run ramargs addip addtty addmisc;" \
372 "bootm ${kernel_fl_addr} ${ramdisk_fl_addr}\0" \
373 ""
374
375#endif /* __CONFIG_H */