Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
Heiko Schocher | 988ea35 | 2013-08-19 16:38:59 +0200 | [diff] [blame] | 2 | /* |
| 3 | * omap_wdt.c |
| 4 | * |
| 5 | * (C) Copyright 2013 |
| 6 | * Heiko Schocher, DENX Software Engineering, hs@denx.de. |
| 7 | * |
Heiko Schocher | 988ea35 | 2013-08-19 16:38:59 +0200 | [diff] [blame] | 8 | * Based on: |
| 9 | * |
| 10 | * Watchdog driver for the TI OMAP 16xx & 24xx/34xx 32KHz (non-secure) watchdog |
| 11 | * |
| 12 | * commit 2d991a164a61858012651e13c59521975504e260 |
| 13 | * Author: Bill Pemberton <wfp5p@virginia.edu> |
| 14 | * Date: Mon Nov 19 13:21:41 2012 -0500 |
| 15 | * |
| 16 | * watchdog: remove use of __devinit |
| 17 | * |
| 18 | * CONFIG_HOTPLUG is going away as an option so __devinit is no longer |
| 19 | * needed. |
| 20 | * |
| 21 | * Author: MontaVista Software, Inc. |
| 22 | * <gdavis@mvista.com> or <source@mvista.com> |
| 23 | * |
| 24 | * History: |
| 25 | * |
| 26 | * 20030527: George G. Davis <gdavis@mvista.com> |
| 27 | * Initially based on linux-2.4.19-rmk7-pxa1/drivers/char/sa1100_wdt.c |
| 28 | * (c) Copyright 2000 Oleg Drokin <green@crimea.edu> |
| 29 | * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk> |
| 30 | * |
| 31 | * Copyright (c) 2004 Texas Instruments. |
| 32 | * 1. Modified to support OMAP1610 32-KHz watchdog timer |
| 33 | * 2. Ported to 2.6 kernel |
| 34 | * |
| 35 | * Copyright (c) 2005 David Brownell |
| 36 | * Use the driver model and standard identifiers; handle bigger timeouts. |
| 37 | */ |
| 38 | |
| 39 | #include <common.h> |
| 40 | #include <watchdog.h> |
| 41 | #include <asm/arch/hardware.h> |
| 42 | #include <asm/io.h> |
| 43 | #include <asm/processor.h> |
| 44 | #include <asm/arch/cpu.h> |
Suniel Mahesh | 7659ea3 | 2019-07-31 21:54:06 +0530 | [diff] [blame] | 45 | #include <wdt.h> |
| 46 | #include <dm.h> |
| 47 | #include <errno.h> |
Heiko Schocher | 988ea35 | 2013-08-19 16:38:59 +0200 | [diff] [blame] | 48 | |
| 49 | /* Hardware timeout in seconds */ |
| 50 | #define WDT_HW_TIMEOUT 60 |
| 51 | |
Suniel Mahesh | 7659ea3 | 2019-07-31 21:54:06 +0530 | [diff] [blame] | 52 | #if !CONFIG_IS_ENABLED(WDT) |
Heiko Schocher | 988ea35 | 2013-08-19 16:38:59 +0200 | [diff] [blame] | 53 | static unsigned int wdt_trgr_pattern = 0x1234; |
| 54 | |
| 55 | void hw_watchdog_reset(void) |
| 56 | { |
| 57 | struct wd_timer *wdt = (struct wd_timer *)WDT_BASE; |
| 58 | |
Ruslan Bilovol | 87c692c | 2018-03-01 03:15:48 +0200 | [diff] [blame] | 59 | /* |
| 60 | * Somebody just triggered watchdog reset and write to WTGR register |
| 61 | * is in progress. It is resetting right now, no need to trigger it |
| 62 | * again |
| 63 | */ |
| 64 | if ((readl(&wdt->wdtwwps)) & WDT_WWPS_PEND_WTGR) |
| 65 | return; |
Heiko Schocher | 988ea35 | 2013-08-19 16:38:59 +0200 | [diff] [blame] | 66 | |
| 67 | wdt_trgr_pattern = ~wdt_trgr_pattern; |
| 68 | writel(wdt_trgr_pattern, &wdt->wdtwtgr); |
| 69 | |
Ruslan Bilovol | 87c692c | 2018-03-01 03:15:48 +0200 | [diff] [blame] | 70 | /* |
| 71 | * Don't wait for posted write to complete, i.e. don't check |
| 72 | * WDT_WWPS_PEND_WTGR bit in WWPS register. There is no writes to |
| 73 | * WTGR register outside of this func, and if entering it |
| 74 | * we see WDT_WWPS_PEND_WTGR bit set, it means watchdog reset |
| 75 | * was just triggered. This prevents us from wasting time in busy |
| 76 | * polling of WDT_WWPS_PEND_WTGR bit. |
| 77 | */ |
Heiko Schocher | 988ea35 | 2013-08-19 16:38:59 +0200 | [diff] [blame] | 78 | } |
| 79 | |
| 80 | static int omap_wdt_set_timeout(unsigned int timeout) |
| 81 | { |
| 82 | struct wd_timer *wdt = (struct wd_timer *)WDT_BASE; |
| 83 | u32 pre_margin = GET_WLDR_VAL(timeout); |
| 84 | |
| 85 | /* just count up at 32 KHz */ |
| 86 | while (readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WLDR) |
| 87 | ; |
| 88 | |
| 89 | writel(pre_margin, &wdt->wdtwldr); |
| 90 | while (readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WLDR) |
| 91 | ; |
| 92 | |
| 93 | return 0; |
| 94 | } |
| 95 | |
Lukasz Majewski | b633b9c | 2017-02-19 23:24:38 +0100 | [diff] [blame] | 96 | void hw_watchdog_disable(void) |
| 97 | { |
| 98 | struct wd_timer *wdt = (struct wd_timer *)WDT_BASE; |
| 99 | |
| 100 | /* |
| 101 | * Disable watchdog |
| 102 | */ |
| 103 | writel(0xAAAA, &wdt->wdtwspr); |
| 104 | while (readl(&wdt->wdtwwps) != 0x0) |
| 105 | ; |
| 106 | writel(0x5555, &wdt->wdtwspr); |
| 107 | while (readl(&wdt->wdtwwps) != 0x0) |
| 108 | ; |
| 109 | } |
| 110 | |
Heiko Schocher | 988ea35 | 2013-08-19 16:38:59 +0200 | [diff] [blame] | 111 | void hw_watchdog_init(void) |
| 112 | { |
| 113 | struct wd_timer *wdt = (struct wd_timer *)WDT_BASE; |
| 114 | |
Lukasz Majewski | b633b9c | 2017-02-19 23:24:38 +0100 | [diff] [blame] | 115 | /* |
| 116 | * Make sure the watchdog is disabled. This is unfortunately required |
| 117 | * because writing to various registers with the watchdog running has no |
| 118 | * effect. |
| 119 | */ |
| 120 | hw_watchdog_disable(); |
| 121 | |
Heiko Schocher | 988ea35 | 2013-08-19 16:38:59 +0200 | [diff] [blame] | 122 | /* initialize prescaler */ |
| 123 | while (readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WCLR) |
| 124 | ; |
| 125 | |
| 126 | writel(WDT_WCLR_PRE | (PTV << WDT_WCLR_PTV_OFF), &wdt->wdtwclr); |
| 127 | while (readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WCLR) |
| 128 | ; |
| 129 | |
| 130 | omap_wdt_set_timeout(WDT_HW_TIMEOUT); |
| 131 | |
| 132 | /* Sequence to enable the watchdog */ |
| 133 | writel(0xBBBB, &wdt->wdtwspr); |
| 134 | while ((readl(&wdt->wdtwwps)) & WDT_WWPS_PEND_WSPR) |
| 135 | ; |
| 136 | |
| 137 | writel(0x4444, &wdt->wdtwspr); |
| 138 | while ((readl(&wdt->wdtwwps)) & WDT_WWPS_PEND_WSPR) |
| 139 | ; |
| 140 | } |
Suniel Mahesh | 6912f2a | 2019-07-31 21:54:07 +0530 | [diff] [blame] | 141 | |
| 142 | void watchdog_reset(void) |
| 143 | { |
| 144 | hw_watchdog_reset(); |
| 145 | } |
| 146 | |
Suniel Mahesh | 7659ea3 | 2019-07-31 21:54:06 +0530 | [diff] [blame] | 147 | #else |
Suniel Mahesh | 6912f2a | 2019-07-31 21:54:07 +0530 | [diff] [blame] | 148 | |
Suniel Mahesh | 7659ea3 | 2019-07-31 21:54:06 +0530 | [diff] [blame] | 149 | static int omap3_wdt_reset(struct udevice *dev) |
| 150 | { |
| 151 | struct omap3_wdt_priv *priv = dev_get_priv(dev); |
| 152 | |
| 153 | priv->wdt_trgr_pattern = 0x1234; |
| 154 | /* |
| 155 | * Somebody just triggered watchdog reset and write to WTGR register |
| 156 | * is in progress. It is resetting right now, no need to trigger it |
| 157 | * again |
| 158 | */ |
| 159 | if ((readl(&priv->regs->wdtwwps)) & WDT_WWPS_PEND_WTGR) |
| 160 | return 0; |
| 161 | |
| 162 | priv->wdt_trgr_pattern = ~(priv->wdt_trgr_pattern); |
| 163 | writel(priv->wdt_trgr_pattern, &priv->regs->wdtwtgr); |
| 164 | /* |
| 165 | * Don't wait for posted write to complete, i.e. don't check |
| 166 | * WDT_WWPS_PEND_WTGR bit in WWPS register. There is no writes to |
| 167 | * WTGR register outside of this func, and if entering it |
| 168 | * we see WDT_WWPS_PEND_WTGR bit set, it means watchdog reset |
| 169 | * was just triggered. This prevents us from wasting time in busy |
| 170 | * polling of WDT_WWPS_PEND_WTGR bit. |
| 171 | */ |
| 172 | return 0; |
| 173 | } |
| 174 | |
| 175 | static int omap3_wdt_stop(struct udevice *dev) |
| 176 | { |
| 177 | struct omap3_wdt_priv *priv = dev_get_priv(dev); |
| 178 | |
| 179 | /* disable watchdog */ |
| 180 | writel(0xAAAA, &priv->regs->wdtwspr); |
| 181 | while (readl(&priv->regs->wdtwwps) != 0x0) |
| 182 | ; |
| 183 | writel(0x5555, &priv->regs->wdtwspr); |
| 184 | while (readl(&priv->regs->wdtwwps) != 0x0) |
| 185 | ; |
| 186 | return 0; |
| 187 | } |
| 188 | |
| 189 | static int omap3_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags) |
| 190 | { |
| 191 | struct omap3_wdt_priv *priv = dev_get_priv(dev); |
| 192 | u32 pre_margin = GET_WLDR_VAL(timeout_ms); |
| 193 | /* |
| 194 | * Make sure the watchdog is disabled. This is unfortunately required |
| 195 | * because writing to various registers with the watchdog running has no |
| 196 | * effect. |
| 197 | */ |
| 198 | omap3_wdt_stop(dev); |
| 199 | |
| 200 | /* initialize prescaler */ |
| 201 | while (readl(&priv->regs->wdtwwps) & WDT_WWPS_PEND_WCLR) |
| 202 | ; |
| 203 | |
| 204 | writel(WDT_WCLR_PRE | (PTV << WDT_WCLR_PTV_OFF), &priv->regs->wdtwclr); |
| 205 | while (readl(&priv->regs->wdtwwps) & WDT_WWPS_PEND_WCLR) |
| 206 | ; |
| 207 | /* just count up at 32 KHz */ |
| 208 | while (readl(&priv->regs->wdtwwps) & WDT_WWPS_PEND_WLDR) |
| 209 | ; |
| 210 | |
| 211 | writel(pre_margin, &priv->regs->wdtwldr); |
| 212 | while (readl(&priv->regs->wdtwwps) & WDT_WWPS_PEND_WLDR) |
| 213 | ; |
| 214 | /* Sequence to enable the watchdog */ |
| 215 | writel(0xBBBB, &priv->regs->wdtwspr); |
| 216 | while ((readl(&priv->regs->wdtwwps)) & WDT_WWPS_PEND_WSPR) |
| 217 | ; |
| 218 | |
| 219 | writel(0x4444, &priv->regs->wdtwspr); |
| 220 | while ((readl(&priv->regs->wdtwwps)) & WDT_WWPS_PEND_WSPR) |
| 221 | ; |
| 222 | |
| 223 | return 0; |
| 224 | } |
| 225 | |
| 226 | static int omap3_wdt_probe(struct udevice *dev) |
| 227 | { |
| 228 | struct omap3_wdt_priv *priv = dev_get_priv(dev); |
| 229 | |
| 230 | priv->regs = (struct wd_timer *)devfdt_get_addr(dev); |
| 231 | if (!priv->regs) |
| 232 | return -EINVAL; |
| 233 | |
| 234 | debug("%s: Probing wdt%u\n", __func__, dev->seq); |
| 235 | return 0; |
| 236 | } |
| 237 | |
| 238 | static const struct wdt_ops omap3_wdt_ops = { |
| 239 | .start = omap3_wdt_start, |
| 240 | .stop = omap3_wdt_stop, |
| 241 | .reset = omap3_wdt_reset, |
| 242 | }; |
| 243 | |
| 244 | static const struct udevice_id omap3_wdt_ids[] = { |
| 245 | { .compatible = "ti,omap3-wdt" }, |
| 246 | { } |
| 247 | }; |
| 248 | |
| 249 | U_BOOT_DRIVER(omap3_wdt) = { |
| 250 | .name = "omap3_wdt", |
| 251 | .id = UCLASS_WDT, |
| 252 | .of_match = omap3_wdt_ids, |
| 253 | .ops = &omap3_wdt_ops, |
| 254 | .probe = omap3_wdt_probe, |
| 255 | .priv_auto_alloc_size = sizeof(struct omap3_wdt_priv), |
| 256 | }; |
| 257 | #endif /* !CONFIG_IS_ENABLED(WDT) */ |