Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 27e1b5ee9b3d9b1a5dd92e22d3450929d4a57c49 / . / arch / arm / dts / imx6qdl-gw5903.dtsi
blob: 6ebf6aef2f7dcc45f91ba9b49a8be36ce6dcdaef [file] [log] [blame]
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]1/*
2 * Copyright 2017 Gateworks Corporation
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public
20 * License along with this file; if not, write to the Free
21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 * MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 * b) Permission is hereby granted, free of charge, to any person
27 * obtaining a copy of this software and associated documentation
28 * files (the "Software"), to deal in the Software without
29 * restriction, including without limitation the rights to use,
30 * copy, modify, merge, publish, distribute, sublicense, and/or
31 * sell copies of the Software, and to permit persons to whom the
32 * Software is furnished to do so, subject to the following
33 * conditions:
34 *
35 * The above copyright notice and this permission notice shall be
36 * included in all copies or substantial portions of the Software.
37 *
38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 * OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48#include <dt-bindings/gpio/gpio.h>
49#include <dt-bindings/input/linux-event-codes.h>
50#include <dt-bindings/interrupt-controller/irq.h>
51
52/ {
53 chosen {
54 stdout-path = &uart2;
55 };
56
57 backlight {
58 compatible = "pwm-backlight";
59 pwms = <&pwm1 0 5000000>;
60 brightness-levels = <
61 0 1 2 3 4 5 6 7 8 9
62 10 11 12 13 14 15 16 17 18 19
63 20 21 22 23 24 25 26 27 28 29
64 30 31 32 33 34 35 36 37 38 39
65 40 41 42 43 44 45 46 47 48 49
66 50 51 52 53 54 55 56 57 58 59
67 60 61 62 63 64 65 66 67 68 69
68 70 71 72 73 74 75 76 77 78 79
69 80 81 82 83 84 85 86 87 88 89
70 90 91 92 93 94 95 96 97 98 99
71 100
72 >;
73 default-brightness-level = <100>;
74 };
75
76 gpio-keys {
77 compatible = "gpio-keys";
78 #address-cells = <1>;
79 #size-cells = <0>;
80
81 user-pb {
82 label = "user_pb";
83 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
84 linux,code = <BTN_0>;
85 };
86
87 user-pb1x {
88 label = "user_pb1x";
89 linux,code = <BTN_1>;
90 interrupt-parent = <&gsc>;
91 interrupts = <0>;
92 };
93
94 key-erased {
95 label = "key-erased";
96 linux,code = <BTN_2>;
97 interrupt-parent = <&gsc>;
98 interrupts = <1>;
99 };
100
101 eeprom-wp {
102 label = "eeprom_wp";
103 linux,code = <BTN_3>;
104 interrupt-parent = <&gsc>;
105 interrupts = <2>;
106 };
107
108 tamper {
109 label = "tamper";
110 linux,code = <BTN_4>;
111 interrupt-parent = <&gsc>;
112 interrupts = <5>;
113 };
114
115 switch-hold {
116 label = "switch_hold";
117 linux,code = <BTN_5>;
118 interrupt-parent = <&gsc>;
119 interrupts = <7>;
120 };
121 };
122
123 leds {
124 compatible = "gpio-leds";
125 pinctrl-names = "default";
126 pinctrl-0 = <&pinctrl_gpio_leds>;
127
128 led0: user1 {
129 label = "user1";
130 gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
131 default-state = "off";
132 };
133 };
134
135 memory@10000000 {
136 device_type = "memory";
137 reg = <0x10000000 0x40000000>;
138 };
139
140 reg_5p0v: regulator-5p0v {
141 compatible = "regulator-fixed";
142 regulator-name = "5P0V";
143 regulator-min-microvolt = <5000000>;
144 regulator-max-microvolt = <5000000>;
145 regulator-always-on;
146 };
147
148 reg_3p3v: regulator-3p3v {
149 compatible = "regulator-fixed";
150 regulator-name = "3P3V";
151 regulator-min-microvolt = <3300000>;
152 regulator-max-microvolt = <3300000>;
153 regulator-always-on;
154 };
155
156 reg_2p5v: regulator-2p5v {
157 compatible = "regulator-fixed";
158 regulator-name = "2P5V";
159 regulator-min-microvolt = <2500000>;
160 regulator-max-microvolt = <2500000>;
161 regulator-always-on;
162 };
163
164 reg_usb_h1_vbus: regulator-usb-h1-vbus {
165 compatible = "regulator-fixed";
166 regulator-name = "usb_h1_vbus";
167 regulator-min-microvolt = <5000000>;
168 regulator-max-microvolt = <5000000>;
169 gpio = <&gpio3 30 0>;
170 enable-active-high;
171 };
172
173 reg_usb_otg_vbus: regulator-usb-otg-vbus {
174 compatible = "regulator-fixed";
175 regulator-name = "usb_otg_vbus";
176 regulator-min-microvolt = <5000000>;
177 regulator-max-microvolt = <5000000>;
178 gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
179 enable-active-high;
180 };
181
182 reg_12p0: regulator-12p0v {
183 compatible = "regulator-fixed";
184 regulator-name = "12P0V";
185 regulator-min-microvolt = <12000000>;
186 regulator-max-microvolt = <12000000>;
187 gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
188 enable-active-high;
189 };
190
191 sound {
192 compatible = "fsl,imx-audio-tlv320";
193 model = "imx-tlv320";
194 ssi-controller = <&ssi1>;
195 audio-codec = <&tlv320aic3105>;
196 /* routing of sink, source */
197 audio-routing =
198 /* TLV320 LINE1L pin <-> Mic Jack connector */
199 "LINE1L", "Mic Jack",
200 /* board Headphone Jack <-> HPOUT */
201 "Headphone Jack", "HPLOUT",
202 "Headphone Jack", "HPROUT",
203 "Mic Jack", "Mic Bias";
204 mux-int-port = <1>;
205 mux-ext-port = <6>;
206 };
207};
208
209&audmux {
210 pinctrl-names = "default";
211 pinctrl-0 = <&pinctrl_audmux>;
212 status = "okay";
213};
214
215&clks {
216 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
217 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
218 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
219 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
220};
221
222&fec {
223 pinctrl-names = "default";
224 pinctrl-0 = <&pinctrl_enet>;
225 phy-mode = "rgmii-id";
Tim Harveycd18f1e2021-05-03 11:21:27 -0700[diff] [blame]226 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
227 phy-reset-duration = <10>;
228 phy-reset-post-delay = <100>;
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]229 status = "okay";
230};
231
232&i2c1 {
233 clock-frequency = <100000>;
234 pinctrl-names = "default";
235 pinctrl-0 = <&pinctrl_i2c1>;
236 status = "okay";
237
238 gsc: gsc@20 {
239 compatible = "gw,gsc";
240 reg = <0x20>;
241 interrupt-parent = <&gpio1>;
242 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
243 interrupt-controller;
244 #interrupt-cells = <1>;
245 #size-cells = <0>;
246
247 adc {
248 compatible = "gw,gsc-adc";
249 #address-cells = <1>;
250 #size-cells = <0>;
251
252 channel@0 {
253 gw,mode = <0>;
254 reg = <0x00>;
255 label = "temp";
256 };
257
258 channel@2 {
259 gw,mode = <1>;
260 reg = <0x02>;
261 label = "vdd_vin";
262 };
263
264 channel@5 {
265 gw,mode = <1>;
266 reg = <0x05>;
267 label = "vdd_3p3";
268 };
269
270 channel@8 {
271 gw,mode = <1>;
272 reg = <0x08>;
273 label = "vdd_bat";
274 };
275
276 channel@b {
277 gw,mode = <1>;
278 reg = <0x0b>;
279 label = "vdd_5p0";
280 };
281
282 channel@e {
283 gw,mode = <1>;
284 reg = <0xe>;
285 label = "vdd_arm";
286 };
287
288 channel@11 {
289 gw,mode = <1>;
290 reg = <0x11>;
291 label = "vdd_soc";
292 };
293
294 channel@14 {
295 gw,mode = <1>;
296 reg = <0x14>;
297 label = "vdd_3p0";
298 };
299
300 channel@17 {
301 gw,mode = <1>;
302 reg = <0x17>;
303 label = "vdd_1p5";
304 };
305
306 channel@1d {
307 gw,mode = <1>;
308 reg = <0x1d>;
309 label = "vdd_1p8";
310 };
311
312 channel@20 {
313 gw,mode = <1>;
314 reg = <0x20>;
315 label = "vdd_an1";
316 };
317
318 channel@23 {
319 gw,mode = <1>;
320 reg = <0x23>;
321 label = "vdd_2p5";
322 };
323 };
324 };
325
326 gsc_gpio: gpio@23 {
327 compatible = "nxp,pca9555";
328 reg = <0x23>;
329 gpio-controller;
330 #gpio-cells = <2>;
331 interrupt-parent = <&gsc>;
332 interrupts = <4>;
333 };
334
335 eeprom1: eeprom@50 {
336 compatible = "atmel,24c02";
337 reg = <0x50>;
338 pagesize = <16>;
339 };
340
341 eeprom2: eeprom@51 {
342 compatible = "atmel,24c02";
343 reg = <0x51>;
344 pagesize = <16>;
345 };
346
347 eeprom3: eeprom@52 {
348 compatible = "atmel,24c02";
349 reg = <0x52>;
350 pagesize = <16>;
351 };
352
353 eeprom4: eeprom@53 {
354 compatible = "atmel,24c02";
355 reg = <0x53>;
356 pagesize = <16>;
357 };
358
359 dts1672: rtc@68 {
360 compatible = "dallas,ds1672";
361 reg = <0x68>;
362 };
363};
364
365&i2c2 {
366 clock-frequency = <400000>;
367 pinctrl-names = "default";
368 pinctrl-0 = <&pinctrl_i2c2>;
369 status = "okay";
370
371 ltc3676: pmic@3c {
372 compatible = "lltc,ltc3676";
373 reg = <0x3c>;
374 interrupt-parent = <&gpio1>;
375 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
376
377 regulators {
378 /* VDD_1P8 (1+R1/R2 = 2.505): Aud/eMMC/microSD/Touch */
379 reg_1p8v: sw1 {
380 regulator-name = "vdd1p8";
381 regulator-min-microvolt = <1033310>;
382 regulator-max-microvolt = <2004000>;
383 lltc,fb-voltage-divider = <301000 200000>;
384 regulator-ramp-delay = <7000>;
385 regulator-boot-on;
386 regulator-always-on;
387 };
388
389 /* VDD_DDR (1+R1/R2 = 2.105) */
390 reg_vdd_ddr: sw2 {
391 regulator-name = "vddddr";
392 regulator-min-microvolt = <868310>;
393 regulator-max-microvolt = <1684000>;
394 lltc,fb-voltage-divider = <221000 200000>;
395 regulator-ramp-delay = <7000>;
396 regulator-boot-on;
397 regulator-always-on;
398 };
399
400 /* VDD_ARM (1+R1/R2 = 1.635) */
401 reg_vdd_arm: sw3 {
402 regulator-name = "vddarm";
403 regulator-min-microvolt = <674400>;
404 regulator-max-microvolt = <1308000>;
405 lltc,fb-voltage-divider = <127000 200000>;
406 regulator-ramp-delay = <7000>;
407 regulator-boot-on;
408 regulator-always-on;
409 linux,phandle = <&reg_vdd_arm>;
410 };
411
412 /* VDD_SOC (1+R1/R2 = 1.635) */
413 reg_vdd_soc: sw4 {
414 regulator-name = "vddsoc";
415 regulator-min-microvolt = <674400>;
416 regulator-max-microvolt = <1308000>;
417 lltc,fb-voltage-divider = <127000 200000>;
418 regulator-ramp-delay = <7000>;
419 regulator-boot-on;
420 regulator-always-on;
421 linux,phandle = <&reg_vdd_soc>;
422 };
423
424 /* VDD_1P0 (1+R1/R2 = 1.38): */
425 reg_1p0v: ldo2 {
426 regulator-name = "vdd1p0";
427 regulator-min-microvolt = <1002777>;
428 regulator-max-microvolt = <1002777>;
429 lltc,fb-voltage-divider = <100000 261000>;
430 regulator-boot-on;
431 regulator-always-on;
432 };
433
434 /* VDD_HIGH (1+R1/R2 = 4.17) */
435 reg_3p0v: ldo4 {
436 regulator-name = "vdd3p0";
437 regulator-min-microvolt = <3023250>;
438 regulator-max-microvolt = <3023250>;
439 lltc,fb-voltage-divider = <634000 200000>;
440 regulator-boot-on;
441 regulator-always-on;
442 };
443 };
444 };
445};
446
447&i2c3 {
448 clock-frequency = <400000>;
449 pinctrl-names = "default";
450 pinctrl-0 = <&pinctrl_i2c3>;
451 status = "okay";
452
453 tlv320aic3105: codec@18 {
454 compatible = "ti,tlv320aic3x";
455 reg = <0x18>;
456 reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
457 clocks = <&clks IMX6QDL_CLK_CKO>;
458 ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
459 /* Regulators */
460 DRVDD-supply = <&reg_3p3v>;
461 AVDD-supply = <&reg_3p3v>;
462 IOVDD-supply = <&reg_3p3v>;
463 DVDD-supply = <&reg_1p8v>;
464 };
465
466 accelerometer@1d {
467 compatible = "fsl,mma8451";
468 reg = <0x1d>;
469 interrupt-parent = <&gpio7>;
470 interrupts = <11 IRQ_TYPE_EDGE_RISING>;
471 interrupt-names = "INT2";
472 };
473
474 /* headphone detect */
475 ts3a227e@3b {
476 compatible = "ti,ts3a227e";
477 reg = <0x3b>;
478 interrupt-parent = <&gpio5>;
479 interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
480 ti,micbias = <4>; /* 2.5V micbias */
481 };
482};
483
484&ldb {
485 status = "okay";
486
487 lvds-channel@0 {
488 fsl,data-mapping = "spwg";
489 fsl,data-width = <18>;
490 status = "okay";
491
492 display-timings {
493 native-mode = <&timing0>;
494 timing0: g101evn010 {
495 clock-frequency = <68930000>;
496 hactive = <1280>;
497 vactive = <800>;
498 hback-porch = <220>;
499 hfront-porch = <40>;
500 vback-porch = <21>;
501 vfront-porch = <7>;
502 hsync-len = <60>;
503 vsync-len = <10>;
504 };
505 };
506 };
507};
508
509&pwm1 {
510 #pwm-cells = <2>;
511 pinctrl-names = "default";
512 pinctrl-0 = <&pinctrl_pwm1>;
513 status = "okay";
514};
515
516&ssi1 {
517 status = "okay";
518};
519
520&uart1 {
521 pinctrl-names = "default";
522 pinctrl-0 = <&pinctrl_uart1>;
523 status = "okay";
524};
525
526&uart2 {
527 pinctrl-names = "default";
528 pinctrl-0 = <&pinctrl_uart2>;
529 status = "okay";
530};
531
532&usbotg {
533 vbus-supply = <&reg_usb_otg_vbus>;
534 pinctrl-names = "default";
535 pinctrl-0 = <&pinctrl_usbotg>;
536 disable-over-current;
Tim Harvey13acc632021-03-01 14:33:31 -0800[diff] [blame]537 dr_mode = "host";
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]538 status = "okay";
539};
540
541&usbh1 {
542 vbus-supply = <&reg_usb_h1_vbus>;
543 status = "okay";
544};
545
546&usdhc1 {
547 pinctrl-names = "default";
548 pinctrl-0 = <&pinctrl_usdhc1_200mhz>;
549 vmmc-supply = <&reg_3p3v>;
550 non-removable;
551 bus-width = <4>;
552 status = "okay";
553};
554
555&usdhc2 {
556 pinctrl-names = "default", "state_100mhz", "state_200mhz";
557 pinctrl-0 = <&pinctrl_usdhc2>;
558 pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
559 pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
560 cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
561 vmmc-supply = <&reg_3p3v>;
562 max-frequency = <100000000>;
563 status = "okay";
564};
565
566&usdhc3 {
567 pinctrl-names = "default", "state_100mhz", "state_200mhz";
568 pinctrl-0 = <&pinctrl_usdhc3>;
569 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
570 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
571 non-removable;
572 vmmc-supply = <&reg_3p3v>;
573 keep-power-in-suspend;
574 status = "okay";
575};
576
577&wdog1 {
578 pinctrl-names = "default";
579 pinctrl-0 = <&pinctrl_wdog>;
580 fsl,ext-reset-output;
581};
582
583&iomuxc {
584 pinctrl_audmux: audmuxgrp {
585 fsl,pins = <
586 MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0
587 MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0
588 MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0
589 MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0
590 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* MCK */
591 >;
592 };
593
594 pinctrl_enet: enetgrp {
595 fsl,pins = <
596 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
597 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
598 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
599 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
600 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
601 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
602 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
603 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
604 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
605 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
606 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
607 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
608 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
609 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
610 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
611 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */
612 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0 /* PHY_EN */
613 >;
614 };
615
616 pinctrl_gpio_leds: gpioledsgrp {
617 fsl,pins = <
618 MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
619 >;
620 };
621
622 pinctrl_i2c1: i2c1grp {
623 fsl,pins = <
624 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
625 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
626 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
627 >;
628 };
629
630 pinctrl_i2c2: i2c2grp {
631 fsl,pins = <
632 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
633 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
634 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
635 >;
636 };
637
638 pinctrl_i2c3: i2c3grp {
639 fsl,pins = <
640 /* I2C3 */
641 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
642 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
643
644 /* Headphone Detect */
645 MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x0001b0b0 /* HPDET_IRQ# */
646 MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x0001b0b0 /* HPDET_MIC# */
647
648 /* Codec */
649 MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x0001b0b0 /* CODEC_RST# */
650
651 /* Touch Controller */
652 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b0b0 /* TOUCH_IRQ# */
653 MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b0b0 /* TOUCH_RST */
654
655 /* Stow Sensor */
656 MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x0001b0b0 /* ACCEL_IRQ2 */
657 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b0b0 /* ACCEL_IRQ1 */
658 >;
659 };
660
661 pinctrl_pwm1: pwm1grp {
662 fsl,pins = <
663 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
664 >;
665 };
666
667 pinctrl_uart1: uart1grp {
668 fsl,pins = <
669 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
670 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
671 MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b1 /* TXEN */
672 >;
673 };
674
675 pinctrl_uart2: uart2grp {
676 fsl,pins = <
677 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
678 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
679 >;
680 };
681
682 pinctrl_usbotg: usbotggrp {
683 fsl,pins = <
684 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
685 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x4001b0b0 /* PWR_EN */
686 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
687 >;
688 };
689
690 pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
691 fsl,pins = <
692 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x4001b0b0 /* EMMY_EN */
693 MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x4001b0b0 /* EMMY_CFG1# */
694 MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x4001b0b0 /* EMMY_CFG2# */
695 MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x0001b0b0 /* EMMY_BTWAKE# */
696 MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x0001b0b0 /* EMMY_WFWAKE# */
697
698 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
699 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x100f9
700 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
701 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
702 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
703 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
704 >;
705 };
706
707 pinctrl_usdhc2: usdhc2grp {
708 fsl,pins = <
709 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
710 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
711 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
712 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
713 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
714 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
715 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x17059 /* CD */
716 MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x17059
717 >;
718 };
719
720 pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
721 fsl,pins = <
722 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
723 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
724 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
725 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
726 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
727 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
728 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x170b9 /* CD */
729 MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x170b9
730 >;
731 };
732
733 pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
734 fsl,pins = <
735 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
736 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
737 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
738 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
739 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
740 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
741 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x170f9 /* CD */
742 MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x170f9
743 >;
744 };
745
746 pinctrl_usdhc3: usdhc3grp {
747 fsl,pins = <
748 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
749 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
750 MX6QDL_PAD_SD3_RST__SD3_RESET 0x10059
751 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
752 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
753 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
754 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
755 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
756 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
757 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
758 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
759 >;
760 };
761
762 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
763 fsl,pins = <
764 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
765 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
766 MX6QDL_PAD_SD3_RST__SD3_RESET 0x100b9
767 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
768 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
769 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
770 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
771 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
772 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
773 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
774 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
775 >;
776 };
777
778 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
779 fsl,pins = <
780 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
781 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
782 MX6QDL_PAD_SD3_RST__SD3_RESET 0x100f9
783 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
784 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
785 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
786 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
787 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
788 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
789 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
790 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
791 >;
792 };
793
794 pinctrl_wdog: wdoggrp {
795 fsl,pins = <
796 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
797 >;
798 };
799};