blob: e1c9c9080c9e95cd02addd1bc2426b0388a68586 [file] [log] [blame]
Tony Dinhee48f532021-06-30 21:26:22 -07001// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device tree file for the Zyxel NSA 310S NAS box.
4 *
5 * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
6 *
7 * Based on
8 * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
9 * Based upon the board setup file created by Peter Schildmann
10 */
11/dts-v1/;
12
13#include "kirkwood.dtsi"
14#include "kirkwood-6281.dtsi"
15
16/ {
17 model = "Zyxel NSA310S";
18 compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
19
20 memory {
21 device_type = "memory";
22 reg = <0x00000000 0x10000000>;
23 };
24
25 chosen {
26 bootargs = "console=ttyS0,115200";
27 stdout-path = &uart0;
28 };
29
30 ocp@f1000000 {
31 pinctrl: pin-controller@10000 {
32 pinctrl-names = "default";
33
34 pmx_sata0: pmx-sata0 {
35 marvell,pins ;
36 marvell,function = "sata0";
37 };
38
39 pmx_sata1: pmx-sata1 {
40 marvell,pins ;
41 marvell,function = "sata1";
42 };
43
44 pmx_usb_power: pmx-usb-power {
45 marvell,pins = "mpp21";
46 marvell,function = "gpio";
47 };
48
49 pmx_pwr_off: pmx-pwr-off {
50 marvell,pins = "mpp27";
51 marvell,function = "gpio";
52 };
53
54 pmx_btn_reset: pmx-btn-reset {
55 marvell,pins = "mpp24";
56 marvell,function = "gpio";
57 };
58
59 pmx_btn_copy: pmx-btn-copy {
60 marvell,pins = "mpp25";
61 marvell,function = "gpio";
62 };
63
64 pmx_btn_power: pmx-btn-power {
65 marvell,pins = "mpp26";
66 marvell,function = "gpio";
67 };
68
69 pmx_led_hdd2_green: pmx-led-hdd2-green {
70 marvell,pins = "mpp34";
71 marvell,function = "gpio";
72 };
73
74 pmx_led_hdd2_red: pmx-led-hdd2-red {
75 marvell,pins = "mpp12";
76 marvell,function = "gpio";
77 };
78
79 pmx_led_usb_green: pmx-led-usb-green {
80 marvell,pins = "mpp15";
81 marvell,function = "gpio";
82 };
83
84 pmx_led_copy_green: pmx-led-copy-green {
85 marvell,pins = "mpp22";
86 marvell,function = "gpio";
87 };
88
89 pmx_led_copy_red: pmx-led-copy-red {
90 marvell,pins = "mpp23";
91 marvell,function = "gpio";
92 };
93
94 pmx_led_sys_green: pmx-led-sys-green {
95 marvell,pins = "mpp28";
96 marvell,function = "gpio";
97 };
98
99 pmx_led_sys_orange: pmx-led-sys-orange {
100 marvell,pins = "mpp29";
101 marvell,function = "gpio";
102 };
103
104 pmx_led_hdd1_green: pmx-led-hdd1-green {
105 marvell,pins = "mpp16";
106 marvell,function = "gpio";
107 };
108
109 pmx_led_hdd1_red: pmx-led-hdd1-red {
110 marvell,pins = "mpp13";
111 marvell,function = "gpio";
112 };
113
114 pmx_pwr_sata1: pmx-pwr-sata1 {
115 marvell,pins = "mpp33";
116 marvell,function = "gpio";
117 };
118 };
119
120 serial@12000 {
121 status = "ok";
122 };
123
124 sata@80000 {
125 status = "okay";
126 nr-ports = <1>;
127 };
128
129 rtc@10300 {
130 status = "disabled";
131 };
132
133 i2c@11000 {
134 status = "okay";
135 ht1382: rtc@68 {
136 compatible = "htk,ht1382";
137 reg = <0x68>;
138 };
139 };
140 };
141
142 regulators {
143 compatible = "simple-bus";
144 #address-cells = <1>;
145 #size-cells = <0>;
146 pinctrl-names = "default";
147 pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
148
149 usb0_power: regulator@1 {
150 compatible = "regulator-fixed";
151 reg = <1>;
152 regulator-name = "USB Power";
153 regulator-min-microvolt = <5000000>;
154 regulator-max-microvolt = <5000000>;
155 regulator-always-on;
156 regulator-boot-on;
157 enable-active-high;
158 gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
159 };
160
161 sata1_power: regulator@2 {
162 compatible = "regulator-fixed";
163 reg = <2>;
164 regulator-name = "SATA1 Power";
165 regulator-min-microvolt = <5000000>;
166 regulator-max-microvolt = <5000000>;
167 regulator-always-on;
168 regulator-boot-on;
169 enable-active-high;
170 gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
171 };
172 };
173
174 gpio_poweroff {
175 compatible = "gpio-poweroff";
176 pinctrl-0 = <&pmx_pwr_off>;
177 pinctrl-names = "default";
178 gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
179 };
180
181 gpio_keys {
182 compatible = "gpio-keys";
183 #address-cells = <1>;
184 #size-cells = <0>;
185 pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
186 pinctrl-names = "default";
187
188 button@1 {
189 label = "Power Button";
190 linux,code = <KEY_POWER>;
191 gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
192 };
193 button@2 {
194 label = "Copy Button";
195 linux,code = <KEY_COPY>;
196 gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
197 };
198 button@3 {
199 label = "Reset Button";
200 linux,code = <KEY_RESTART>;
201 gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
202 };
203 };
204
205 gpio-leds {
206 compatible = "gpio-leds";
207 pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
208 &pmx_led_usb_green
209 &pmx_led_sys_green &pmx_led_sys_orange
210 &pmx_led_copy_green &pmx_led_copy_red
211 &pmx_led_hdd1_green &pmx_led_hdd1_red>;
212 pinctrl-names = "default";
213
214 green-sys {
215 label = "nsa310s:green:sys";
216 gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
217 linux,default-trigger = "default-on";
218 };
219 orange-sys {
220 label = "nsa310s:orange:sys";
221 gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
222 };
223 green-hdd1 {
224 label = "nsa310s:green:hdd1";
225 gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
226 };
227 red-hdd1 {
228 label = "nsa310s:red:hdd1";
229 gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
230 };
231 green-hdd2 {
232 label = "nsa310s:green:hdd2";
233 gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
234 };
235 red-hdd2 {
236 label = "nsa310s:red:hdd2";
237 gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
238 };
239 green-usb {
240 label = "nsa310s:green:usb";
241 gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
242 };
243 green-copy {
244 label = "nsa310s:green:copy";
245 gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
246 linux,default-trigger = "ide-disk";
247 };
248 red-copy {
249 label = "nsa310s:red:copy";
250 gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
251 };
252 };
253};
254
255&nand {
256 status = "okay";
257 chip-delay = <35>;
258
259 partition@0 {
260 label = "uboot";
261 reg = <0x0000000 0x0100000>;
262 };
263 partition@100000 {
264 label = "stock_uboot_env";
265 reg = <0x0100000 0x0080000>;
266 };
267 partition@180000 {
268 label = "key_store";
269 reg = <0x0180000 0x0080000>;
270 };
271 partition@200000 {
272 label = "info";
273 reg = <0x0200000 0x0080000>;
274 };
275 partition@280000 {
276 label = "etc";
277 reg = <0x0280000 0x0a00000>;
278 };
279 partition@c80000 {
280 label = "kernel_1";
281 reg = <0x0c80000 0x0a00000>;
282 };
283 partition@1680000 {
284 label = "rootfs1";
285 reg = <0x1680000 0x2fc0000>;
286 };
287 partition@4640000 {
288 label = "kernel_2";
289 reg = <0x4640000 0x0a00000>;
290 };
291 partition@5040000 {
292 label = "rootfs2";
293 reg = <0x5040000 0x2fc0000>;
294 };
295};
296
297&mdio {
298 status = "okay";
299 ethphy0: ethernet-phy@1 {
300 compatible = "marvell,88e1510";
301 reg = <1>;
302 };
303};
304
305&eth0 {
306 status = "okay";
307 ethernet0-port@0 {
308 phy-handle = <&ethphy0>;
309 };
310};
311
312&pciec {
313 status = "okay";
314};
315
316&pcie0 {
317 status = "okay";
318};