blob: 2924e3143a122d226a53d5ff69b7a89cc6654adb [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Breno Lima792f1862016-11-25 16:56:57 -02002/*
3 * Copyright 2014-2015 Freescale Semiconductor, Inc.
4 * Copyright Jasbir Matharu
5 * Copyright 2015 UDOO Team
6 *
7 * Configuration settings for the UDOO NEO board.
Breno Lima792f1862016-11-25 16:56:57 -02008 */
9
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
Breno Lima792f1862016-11-25 16:56:57 -020013#include "mx6_common.h"
14
15#include "imx6_spl.h"
16
17/* Size of malloc() pool */
18#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
Breno Lima792f1862016-11-25 16:56:57 -020019#define CONFIG_MXC_UART
20
21/* MMC Configuration */
22#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
23
24/* Command definition */
25#define CONFIG_MXC_UART_BASE UART1_BASE
Breno Lima792f1862016-11-25 16:56:57 -020026#define CONFIG_SYS_MMC_ENV_DEV 0 /*USDHC2*/
27
28/* Linux only */
Breno Lima792f1862016-11-25 16:56:57 -020029#define CONFIG_EXTRA_ENV_SETTINGS \
Peter Robinsonf9028022017-02-14 13:10:10 +000030 "console=ttymxc0,115200\0" \
Breno Lima792f1862016-11-25 16:56:57 -020031 "fdt_high=0xffffffff\0" \
32 "initrd_high=0xffffffff\0" \
Fabio Estevam5d3a28a2016-12-15 20:10:08 -020033 "fdtfile=undefined\0" \
Breno Lima792f1862016-11-25 16:56:57 -020034 "fdt_addr=0x83000000\0" \
Breno Lima8df93b12017-01-10 16:32:38 -020035 "fdt_addr_r=0x83000000\0" \
Breno Lima792f1862016-11-25 16:56:57 -020036 "ip_dyn=yes\0" \
37 "mmcdev=0\0" \
38 "mmcrootfstype=ext4\0" \
Breno Lima792f1862016-11-25 16:56:57 -020039 "findfdt="\
40 "if test $board_name = BASIC; then " \
Fabio Estevam5d3a28a2016-12-15 20:10:08 -020041 "setenv fdtfile imx6sx-udoo-neo-basic.dtb; fi; " \
Breno Lima792f1862016-11-25 16:56:57 -020042 "if test $board_name = BASICKS; then " \
Fabio Estevam5d3a28a2016-12-15 20:10:08 -020043 "setenv fdtfile imx6sx-udoo-neo-basic.dtb; fi; " \
Breno Lima792f1862016-11-25 16:56:57 -020044 "if test $board_name = FULL; then " \
Fabio Estevam5d3a28a2016-12-15 20:10:08 -020045 "setenv fdtfile imx6sx-udoo-neo-full.dtb; fi; " \
Breno Lima792f1862016-11-25 16:56:57 -020046 "if test $board_name = EXTENDED; then " \
Fabio Estevam5d3a28a2016-12-15 20:10:08 -020047 "setenv fdtfile imx6sx-udoo-neo-extended.dtb; fi; " \
48 "if test $fdtfile = UNDEFINED; then " \
Breno Limad8e13882017-01-10 16:32:39 -020049 "echo WARNING: Could not determine dtb to use; fi\0" \
Breno Lima792f1862016-11-25 16:56:57 -020050 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
51 "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
Peter Robinson276ad062017-02-14 13:10:11 +000052 "ramdisk_addr_r=0x84000000\0" \
Breno Lima792f1862016-11-25 16:56:57 -020053 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
54 BOOTENV
55
56#define BOOT_TARGET_DEVICES(func) \
Breno Limaa11e30f2016-12-06 15:38:26 -020057 func(MMC, mmc, 0) \
58 func(DHCP, dhcp, na)
Breno Lima792f1862016-11-25 16:56:57 -020059
Breno Lima792f1862016-11-25 16:56:57 -020060#include <config_distro_bootcmd.h>
61
62/* Miscellaneous configurable options */
63#define CONFIG_SYS_MEMTEST_START 0x80000000
64#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
Breno Lima792f1862016-11-25 16:56:57 -020065
66/* Physical Memory Map */
67#define CONFIG_NR_DRAM_BANKS 1
68#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
69#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
70#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
71#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
72
73#define CONFIG_SYS_INIT_SP_OFFSET \
74 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
75#define CONFIG_SYS_INIT_SP_ADDR \
76 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
77
78/* Environment organization */
79#define CONFIG_ENV_OFFSET (8 * SZ_64K)
80#define CONFIG_ENV_SIZE SZ_8K
Breno Lima792f1862016-11-25 16:56:57 -020081
Breno Lima0719b162016-12-01 16:37:41 -020082#define CONFIG_IMX_THERMAL
83
Breno Lima21729bc2016-12-06 15:38:25 -020084/* I2C configs */
85#define CONFIG_SYS_I2C
86#define CONFIG_SYS_I2C_MXC
87#define CONFIG_SYS_I2C_MXC_I2C1
88#define CONFIG_SYS_I2C_SPEED 100000
89
90/* PMIC */
91#define CONFIG_POWER
92#define CONFIG_POWER_I2C
93#define CONFIG_POWER_PFUZE3000
94#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
95#define PFUZE3000_I2C_BUS 0
96
Breno Limaa11e30f2016-12-06 15:38:26 -020097/* Network */
98#define CONFIG_FEC_MXC
99#define CONFIG_MII
100
101#define CONFIG_FEC_ENET_DEV 0
102#define IMX_FEC_BASE ENET_BASE_ADDR
103#define CONFIG_FEC_MXC_PHYADDR 0x0
104
105#define CONFIG_FEC_XCV_TYPE RMII
106#define CONFIG_ETHPRIME "FEC0"
107
Breno Lima792f1862016-11-25 16:56:57 -0200108#endif /* __CONFIG_H */