blob: 14ff62c52f4228e6378b16d5b5fe7fcc387758b7 [file] [log] [blame]
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +01001/*
2 * (C) Copyright 2000-2005
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * (C) Copyright 2006
6 * Martin Krause, TQ-Systems GmBH, martin.krause@tqs.de
7 *
8 * See file CREDITS for list of people who contributed to this
9 * project.
10 *
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 * MA 02111-1307 USA
25 */
26
27/*
28 * board/config.h - configuration options, board specific
29 */
30
31#ifndef __CONFIG_H
32#define __CONFIG_H
33
34/*
35 * High Level Configuration Options
36 * (easy to change)
37 */
38
39#define CONFIG_MPC885 1 /* This is a MPC885 CPU */
40#define CONFIG_TQM885D 1 /* ...on a TQM88D module */
41#define CONFIG_TK885D 1 /* ...in a TK885D base board */
42
43#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz - PLL input clock */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020044#define CONFIG_SYS_8xx_CPUCLK_MIN 15000000 /* 15 MHz - CPU minimum clock */
45#define CONFIG_SYS_8xx_CPUCLK_MAX 133000000 /* 133 MHz - CPU maximum clock */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +010046#define CONFIG_8xx_CPUCLK_DEFAULT 66000000 /* 66 MHz - CPU default clock */
47 /* (it will be used if there is no */
48 /* 'cpuclk' variable with valid value) */
49
50#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
51
52#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
53
54#define CONFIG_BOOTCOUNT_LIMIT
55
56#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
57
58#define CONFIG_BOARD_TYPES 1 /* support board types */
59
60#define CONFIG_PREBOOT "echo;" \
Wolfgang Denk32bf3d12008-03-03 12:16:44 +010061 "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +010062 "echo"
63
64#undef CONFIG_BOOTARGS
65
66#define CONFIG_EXTRA_ENV_SETTINGS \
Wolfgang Denk2b4f7782008-01-15 17:21:28 +010067 "ethprime=FEC ETHERNET\0" \
68 "ethact=FEC ETHERNET\0" \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +010069 "netdev=eth0\0" \
70 "nfsargs=setenv bootargs root=/dev/nfs rw " \
71 "nfsroot=${serverip}:${rootpath}\0" \
72 "ramargs=setenv bootargs root=/dev/ram rw\0" \
73 "addip=setenv bootargs ${bootargs} " \
74 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
75 ":${hostname}:${netdev}:off panic=1\0" \
76 "flash_nfs=run nfsargs addip;" \
77 "bootm ${kernel_addr}\0" \
78 "flash_self=run ramargs addip;" \
79 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
80 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
81 "rootpath=/opt/eldk/ppc_8xx\0" \
Wolfgang Denk2b4f7782008-01-15 17:21:28 +010082 "bootfile=/tftpboot/tk885d/uImage\0" \
83 "u-boot=/tftpboot/tk885d/u-boot.bin\0" \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +010084 "kernel_addr=40080000\0" \
85 "ramdisk_addr=40180000\0" \
86 "load=tftp 200000 ${u-boot}\0" \
87 "update=protect off 40000000 +${filesize};" \
88 "erase 40000000 +${filesize};" \
89 "cp.b 200000 40000000 ${filesize};" \
90 "protect on 40000000 +${filesize}\0" \
91 ""
92#define CONFIG_BOOTCOMMAND "run flash_self"
93
94#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020095#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +010096
97#undef CONFIG_WATCHDOG /* watchdog disabled */
98
99#define CONFIG_STATUS_LED 1 /* Status LED enabled */
100
101#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
102
103/* enable I2C and select the hardware/software driver */
104#undef CONFIG_HARD_I2C /* I2C with hardware support */
105#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
106
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200107#define CONFIG_SYS_I2C_SPEED 93000 /* 93 kHz is supposed to work */
108#define CONFIG_SYS_I2C_SLAVE 0xFE
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100109
110#ifdef CONFIG_SOFT_I2C
111/*
112 * Software (bit-bang) I2C driver configuration
113 */
114#define PB_SCL 0x00000020 /* PB 26 */
115#define PB_SDA 0x00000010 /* PB 27 */
116
117#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
118#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
119#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
120#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
121#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
122 else immr->im_cpm.cp_pbdat &= ~PB_SDA
123#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
124 else immr->im_cpm.cp_pbdat &= ~PB_SCL
125#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
126#endif /* CONFIG_SOFT_I2C */
127
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200128#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C?? */
129#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* two byte address */
130#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
131#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100132
133# define CONFIG_RTC_DS1337 1
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200134# define CONFIG_SYS_I2C_RTC_ADDR 0x68
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100135
136/*
137 * BOOTP options
138 */
139#define CONFIG_BOOTP_SUBNETMASK
140#define CONFIG_BOOTP_GATEWAY
141#define CONFIG_BOOTP_HOSTNAME
142#define CONFIG_BOOTP_BOOTPATH
143#define CONFIG_BOOTP_BOOTFILESIZE
144
145
146#define CONFIG_MAC_PARTITION
147#define CONFIG_DOS_PARTITION
148
149#undef CONFIG_RTC_MPC8xx /* MPC885 does not support RTC */
150
151#define CONFIG_TIMESTAMP /* but print image timestmps */
152
153
154/*
155 * Command line configuration.
156 */
157#include <config_cmd_default.h>
158
159#define CONFIG_CMD_ASKENV
160#define CONFIG_CMD_DATE
161#define CONFIG_CMD_DHCP
162#define CONFIG_CMD_EEPROM
163#define CONFIG_CMD_I2C
164#define CONFIG_CMD_IDE
165#define CONFIG_CMD_MII
166#define CONFIG_CMD_NFS
167#define CONFIG_CMD_PING
168
169
170/*
171 * Miscellaneous configurable options
172 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200173#define CONFIG_SYS_LONGHELP /* undef to save memory */
174#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100175
176#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200177#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */
178#ifdef CONFIG_SYS_HUSH_PARSER
179#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100180#endif
181
182#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200183#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100184#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200185#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100186#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200187#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
188#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
189#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100190
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200191#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */
192#define CONFIG_SYS_MEMTEST_END 0x0300000 /* 1 ... 3 MB in DRAM */
193#define CONFIG_SYS_ALT_MEMTEST /* alternate, more extensive
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100194 memory test.*/
195
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200196#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100197
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200198#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100199
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200200#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100201
202/*
203 * Enable loopw command.
204 */
205#define CONFIG_LOOPW
206
207/*
208 * Low Level Configuration Settings
209 * (address mappings, register initial values, etc.)
210 * You should know what you are doing if you make changes here.
211 */
212/*-----------------------------------------------------------------------
213 * Internal Memory Mapped Register
214 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200215#define CONFIG_SYS_IMMR 0xFFF00000
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100216
217/*-----------------------------------------------------------------------
218 * Definitions for initial stack pointer and data area (in DPRAM)
219 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200220#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
221#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
222#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
223#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
224#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100225
226/*-----------------------------------------------------------------------
227 * Start addresses for the final memory configuration
228 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200229 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100230 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200231#define CONFIG_SYS_SDRAM_BASE 0x00000000
232#define CONFIG_SYS_FLASH_BASE 0x40000000
233#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
234#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
235#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 128 kB for malloc() */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100236
237/*
238 * For booting Linux, the board info and command line data
239 * have to be in the first 8 MB of memory, since this is
240 * the maximum mapped by the Linux kernel during initialization.
241 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200242#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100243
244/*-----------------------------------------------------------------------
245 * FLASH organization
246 */
247
248/* use CFI flash driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200249#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200250#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200251#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
252#define CONFIG_SYS_FLASH_EMPTY_INFO
253#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
254#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
255#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100256
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200257#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200258#define CONFIG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
259#define CONFIG_ENV_SIZE 0x08000 /* Total Size of Environment */
260#define CONFIG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100261
262/* Address and size of Redundant Environment Sector */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200263#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
264#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100265
266/*-----------------------------------------------------------------------
267 * Hardware Information Block
268 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200269#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
270#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */
271#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100272
273/*-----------------------------------------------------------------------
274 * Cache Configuration
275 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200276#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100277#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200278#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100279#endif
280
281/*-----------------------------------------------------------------------
282 * SYPCR - System Protection Control 11-9
283 * SYPCR can only be written once after reset!
284 *-----------------------------------------------------------------------
285 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
286 */
287#if defined(CONFIG_WATCHDOG)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200288#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100289 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
290#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200291#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100292#endif
293
294/*-----------------------------------------------------------------------
295 * SIUMCR - SIU Module Configuration 11-6
296 *-----------------------------------------------------------------------
297 * PCMCIA config., multi-function pin tri-state
298 */
299#ifndef CONFIG_CAN_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200300#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100301#else /* we must activate GPL5 in the SIUMCR for CAN */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200302#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100303#endif /* CONFIG_CAN_DRIVER */
304
305/*-----------------------------------------------------------------------
306 * TBSCR - Time Base Status and Control 11-26
307 *-----------------------------------------------------------------------
308 * Clear Reference Interrupt Status, Timebase freezing enabled
309 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200310#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100311
312/*-----------------------------------------------------------------------
313 * PISCR - Periodic Interrupt Status and Control 11-31
314 *-----------------------------------------------------------------------
315 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
316 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200317#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100318
319/*-----------------------------------------------------------------------
320 * SCCR - System Clock and reset Control Register 15-27
321 *-----------------------------------------------------------------------
322 * Set clock output, timebase and RTC source and divider,
323 * power management and some other internal clocks
324 */
325#define SCCR_MASK SCCR_EBDF11
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200326#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100327 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
328 SCCR_DFALCD00)
329
330/*-----------------------------------------------------------------------
331 * PCMCIA stuff
332 *-----------------------------------------------------------------------
333 *
334 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200335#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
336#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
337#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
338#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
339#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
340#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
341#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
342#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100343
344/*-----------------------------------------------------------------------
345 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
346 *-----------------------------------------------------------------------
347 */
348
349#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
350
351#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
352#undef CONFIG_IDE_LED /* LED for ide not supported */
353#undef CONFIG_IDE_RESET /* reset for ide not supported */
354
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200355#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
356#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100357
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200358#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100359
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200360#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100361
362/* Offset for data I/O */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200363#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100364
365/* Offset for normal register accesses */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200366#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100367
368/* Offset for alternate registers */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200369#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100370
371/*-----------------------------------------------------------------------
372 *
373 *-----------------------------------------------------------------------
374 *
375 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200376#define CONFIG_SYS_DER 0
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100377
378/*
379 * Init Memory Controller:
380 *
381 * BR0/1 and OR0/1 (FLASH)
382 */
383
384#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
385#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
386
387/* used to re-map FLASH both when starting from SRAM or FLASH:
388 * restrict access enough to keep SRAM working (if any)
389 * but not too much to meddle with FLASH accesses
390 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200391#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
392#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100393
394/*
395 * FLASH timing: Default value of OR0 after reset
396 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200397#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_MSK | OR_BI | \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100398 OR_SCY_6_CLK | OR_TRLX)
399
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200400#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
401#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
402#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100403
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200404#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP
405#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM
406#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100407
408/*
409 * BR2/3 and OR2/3 (SDRAM)
410 *
411 */
412#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
413#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
414#define SDRAM_MAX_SIZE (256 << 20) /* max 256 MB per bank */
415
416/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200417#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100418
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200419#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
420#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100421
422#ifndef CONFIG_CAN_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200423#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM
424#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100425#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200426#define CONFIG_SYS_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
427#define CONFIG_SYS_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
428#define CONFIG_SYS_OR3_CAN (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
429#define CONFIG_SYS_BR3_CAN ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100430 BR_PS_8 | BR_MS_UPMB | BR_V )
431#endif /* CONFIG_CAN_DRIVER */
432
433/*
434 * 4096 Rows from SDRAM example configuration
435 * 1000 factor s -> ms
436 * 64 PTP (pre-divider from MPTPR) from SDRAM example configuration
437 * 4 Number of refresh cycles per period
438 * 64 Refresh cycle in ms per number of rows
439 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200440#define CONFIG_SYS_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64))
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100441
442/*
443 * Periodic timer (MAMR[PTx]) for 4 * 7.8 us refresh (= 31.2 us per quad)
444 *
445 * CPUclock(MHz) * 31.2
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200446 * CONFIG_SYS_MAMR_PTA = ----------------------------------- with DFBRG = 0
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100447 * 2^(2*SCCR[DFBRG]) * MPTPR_PTP_DIV16
448 *
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200449 * CPU clock = 15 MHz: CONFIG_SYS_MAMR_PTA = 29 -> 4 * 7.73 us
450 * CPU clock = 50 MHz: CONFIG_SYS_MAMR_PTA = 97 -> 4 * 7.76 us
451 * CPU clock = 66 MHz: CONFIG_SYS_MAMR_PTA = 128 -> 4 * 7.75 us
452 * CPU clock = 133 MHz: CONFIG_SYS_MAMR_PTA = 255 -> 4 * 7.67 us
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100453 *
454 * Value 97 is for 4 * 7.8 us at 50 MHz. So the refresh cycle requirement will
455 * be met also in the default configuration, i.e. if environment variable
456 * 'cpuclk' is not set.
457 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200458#define CONFIG_SYS_MAMR_PTA 128
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100459
460/*
461 * Memory Periodic Timer Prescaler Register (MPTPR) values.
462 */
463/* 4 * 7.8 us refresh (= 31.2 us per quad) at 50 MHz and PTA = 97 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200464#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100465/* 4 * 3.9 us refresh (= 15.6 us per quad) at 50 MHz and PTA = 97 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200466#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100467
468/*
469 * MAMR settings for SDRAM
470 */
471
472/* 8 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200473#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100474 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
475 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
476/* 9 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200477#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100478 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
479 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
480/* 10 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200481#define CONFIG_SYS_MAMR_10COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100482 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9 | \
483 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
484
485/*
486 * Internal Definitions
487 *
488 * Boot Flags
489 */
490#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
491#define BOOTFLAG_WARM 0x02 /* Software reboot */
492
493/*
494 * Network configuration
495 */
496#define CONFIG_FEC_ENET /* enable ethernet on FEC */
497#define CONFIG_ETHER_ON_FEC1 /* ... for FEC1 */
498#define CONFIG_ETHER_ON_FEC2 /* ... for FEC2 */
499
500#define CONFIG_LAST_STAGE_INIT 1 /* Have to configure PHYs for Linux */
501
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200502/* CONFIG_SYS_DISCOVER_PHY only works with FEC if only one interface is enabled */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100503#if (!defined(CONFIG_ETHER_ON_FEC1) || !defined(CONFIG_ETHER_ON_FEC2))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200504#define CONFIG_SYS_DISCOVER_PHY
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100505#endif
506
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200507#ifndef CONFIG_SYS_DISCOVER_PHY
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100508/* PHY addresses - hard wired in hardware */
509#define CONFIG_FEC1_PHY 1
510#define CONFIG_FEC2_PHY 2
511#endif
512
TsiChung Liew0f3ba7e2008-03-30 01:22:13 -0500513#define CONFIG_MII_INIT 1
514
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100515#define CONFIG_NET_RETRY_COUNT 3
516#define CONFIG_ETHPRIME "FEC ETHERNET"
517
518#endif /* __CONFIG_H */