blob: bbf726dc62549ce59dd799c60b061b2160f771c5 [file] [log] [blame]
Stefan Roese16c0cc12007-03-21 13:39:57 +01001/*
2 * (C) Copyright 2007
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/************************************************************************
25 * acadia.h - configuration for AMCC Acadia (405EZ)
26 ***********************************************************************/
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*-----------------------------------------------------------------------
32 * High Level Configuration Options
33 *----------------------------------------------------------------------*/
Stefan Roese3cb86f32007-03-24 15:45:34 +010034#define CONFIG_ACADIA 1 /* Board is Acadia */
35#define CONFIG_4xx 1 /* ... PPC4xx family */
36#define CONFIG_405EZ 1 /* Specifc 405EZ support*/
Stefan Roese5d4a1792007-05-24 08:22:09 +020037/* Detect Acadia PLL input clock automatically via CPLD bit */
38#define CONFIG_SYS_CLK_FREQ ((in8(CFG_CPLD_BASE + 0) == 0x0c) ? \
39 66666666 : 33333000)
Stefan Roese16c0cc12007-03-21 13:39:57 +010040
Stefan Roese3cb86f32007-03-24 15:45:34 +010041#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
42#define CONFIG_MISC_INIT_F 1 /* Call misc_init_f */
Stefan Roese16c0cc12007-03-21 13:39:57 +010043
44#define CONFIG_NO_SERIAL_EEPROM
45/*#undef CONFIG_NO_SERIAL_EEPROM*/
46
47#ifdef CONFIG_NO_SERIAL_EEPROM
Stefan Roese16c0cc12007-03-21 13:39:57 +010048/*----------------------------------------------------------------------------
49 * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
50 * assuming a 66MHz input clock to the 405EZ.
51 *---------------------------------------------------------------------------*/
52/* #define PLLMR0_100_100_12 */
53#define PLLMR0_200_133_66
54/* #define PLLMR0_266_160_80 */
55/* #define PLLMR0_333_166_83 */
56#endif
57
58/*-----------------------------------------------------------------------
59 * Base addresses -- Note these are effective addresses where the
60 * actual resources get mapped (not physical addresses)
61 *----------------------------------------------------------------------*/
Stefan Roese3cb86f32007-03-24 15:45:34 +010062#define CFG_SDRAM_BASE 0x00000000
63#define CFG_FLASH_BASE 0xfe000000
Stefan Roese3cb86f32007-03-24 15:45:34 +010064#define CFG_CPLD_BASE 0x80000000
65#define CFG_NAND_ADDR 0xd0000000
Stefan Roese16c0cc12007-03-21 13:39:57 +010066#define CFG_USB_HOST 0xef603000 /* USB OHCI 1.1 controller */
67
Stefan Roesed1c1ba82008-05-08 10:48:58 +020068#define CFG_MONITOR_BASE TEXT_BASE
69#define CFG_MONITOR_LEN (0xFFFFFFFF - CFG_MONITOR_BASE + 1)
70#define CFG_MALLOC_LEN (512 * 1024)/* Reserve 512 kB for malloc() */
71
Stefan Roese3cb86f32007-03-24 15:45:34 +010072/*-----------------------------------------------------------------------
73 * Initial RAM & stack pointer
74 *----------------------------------------------------------------------*/
75#define CFG_TEMP_STACK_OCM 1 /* OCM as init ram */
76
77/* On Chip Memory location */
Stefan Roesedf8a24c2007-06-19 16:42:31 +020078#define CFG_OCM_DATA_ADDR 0xf8000000
Stefan Roese3cb86f32007-03-24 15:45:34 +010079#define CFG_OCM_DATA_SIZE 0x4000 /* 16K of onchip SRAM */
80#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SRAM */
81#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
82
83#define CFG_GBL_DATA_SIZE 128 /* size for initial data */
84#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
85#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
86
87/*-----------------------------------------------------------------------
88 * Serial Port
89 *----------------------------------------------------------------------*/
90#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
91#define CFG_BASE_BAUD 691200
92#define CONFIG_BAUDRATE 115200
93#define CONFIG_SERIAL_MULTI 1
94
95/* The following table includes the supported baudrates */
96#define CFG_BAUDRATE_TABLE \
97 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
98
99/*-----------------------------------------------------------------------
100 * Environment
101 *----------------------------------------------------------------------*/
Stefan Roese16c0cc12007-03-21 13:39:57 +0100102#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
Stefan Roese3cb86f32007-03-24 15:45:34 +0100103#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
Stefan Roese16c0cc12007-03-21 13:39:57 +0100104#else
Stefan Roese3cb86f32007-03-24 15:45:34 +0100105#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
106#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
Stefan Roese16c0cc12007-03-21 13:39:57 +0100107#endif
108
Stefan Roese3cb86f32007-03-24 15:45:34 +0100109/*-----------------------------------------------------------------------
110 * FLASH related
111 *----------------------------------------------------------------------*/
Stefan Roesec440bfe2007-06-06 11:42:13 +0200112#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
Stefan Roese3cb86f32007-03-24 15:45:34 +0100113#define CFG_FLASH_CFI /* The flash is CFI compatible */
114#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
115
116#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
117#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
118#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
119
120#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
121#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
122
123#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
124#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
125
Stefan Roesec440bfe2007-06-06 11:42:13 +0200126#else
127#define CFG_NO_FLASH 1 /* No NOR on Acadia when NAND-booting */
Stefan Roesec440bfe2007-06-06 11:42:13 +0200128#endif
129
Stefan Roese3cb86f32007-03-24 15:45:34 +0100130#ifdef CFG_ENV_IS_IN_FLASH
131#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
132#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
133#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
134
135/* Address and size of Redundant Environment Sector */
136#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
137#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
138#endif
139
Stefan Roesec440bfe2007-06-06 11:42:13 +0200140/*
141 * IPL (Initial Program Loader, integrated inside CPU)
142 * Will load first 4k from NAND (SPL) into cache and execute it from there.
143 *
144 * SPL (Secondary Program Loader)
145 * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
146 * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
147 * controller and the NAND controller so that the special U-Boot image can be
148 * loaded from NAND to SDRAM.
149 *
150 * NUB (NAND U-Boot)
151 * This NAND U-Boot (NUB) is a special U-Boot version which can be started
152 * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
153 *
154 * On 440EPx the SPL is copied to SDRAM before the NAND controller is
155 * set up. While still running from cache, I experienced problems accessing
156 * the NAND controller. sr - 2006-08-25
157 */
158#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */
159#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */
Stefan Roesedf8a24c2007-06-19 16:42:31 +0200160#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_DATA_ADDR + (16 << 10)) /* Copy SPL here*/
Stefan Roesec440bfe2007-06-06 11:42:13 +0200161#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */
162#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */
163#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
164
165/*
166 * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
167 */
168#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */
169#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */
170
171/*
172 * Now the NAND chip has to be defined (no autodetection used!)
173 */
174#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */
175#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */
176#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */
177#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */
178#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */
179
180#define CFG_NAND_ECCSIZE 256
181#define CFG_NAND_ECCBYTES 3
182#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
183#define CFG_NAND_OOBSIZE 16
184#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
185#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
186
187#ifdef CFG_ENV_IS_IN_NAND
188/*
189 * For NAND booting the environment is embedded in the U-Boot image. Please take
190 * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
191 */
192#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE
193#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
194#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE)
195#endif
196
Stefan Roese3cb86f32007-03-24 15:45:34 +0100197/*-----------------------------------------------------------------------
198 * RAM (CRAM)
199 *----------------------------------------------------------------------*/
200#define CFG_MBYTES_RAM 64 /* 64MB */
201
202/*-----------------------------------------------------------------------
203 * I2C
204 *----------------------------------------------------------------------*/
205#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
206#undef CONFIG_SOFT_I2C /* I2C bit-banged */
207#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
208#define CFG_I2C_SLAVE 0x7F
209
210#define CFG_I2C_MULTI_EEPROMS
211#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
212#define CFG_I2C_EEPROM_ADDR_LEN 1
213#define CFG_EEPROM_PAGE_WRITE_ENABLE
214#define CFG_EEPROM_PAGE_WRITE_BITS 3
215#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
216
217/* I2C SYSMON (LM75, AD7414 is almost compatible) */
218#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
219#define CONFIG_DTT_AD7414 1 /* use AD7414 */
220#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
221#define CFG_DTT_MAX_TEMP 70
222#define CFG_DTT_LOW_TEMP -30
223#define CFG_DTT_HYSTERESIS 3
224
225#if 0 /* test-only... */
226/*-----------------------------------------------------------------------
227 * SPI stuff - Define to include SPI control
228 *-----------------------------------------------------------------------
229 */
230#define CONFIG_SPI
231#endif
232
233/*-----------------------------------------------------------------------
234 * Ethernet
235 *----------------------------------------------------------------------*/
236#define CONFIG_MII 1 /* MII PHY management */
237#define CONFIG_PHY_ADDR 0 /* PHY address */
238#define CONFIG_NET_MULTI 1
239#define CFG_RX_ETH_BUFFER 16 /* # of rx buffers & descriptors*/
Stefan Roesed1c1ba82008-05-08 10:48:58 +0200240#define CONFIG_HAS_ETH0 1
Stefan Roese3cb86f32007-03-24 15:45:34 +0100241
242#define CONFIG_NETCONSOLE /* include NetConsole support */
243
Stefan Roese16c0cc12007-03-21 13:39:57 +0100244#define CONFIG_PREBOOT "echo;" \
Wolfgang Denk32bf3d12008-03-03 12:16:44 +0100245 "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
Stefan Roese16c0cc12007-03-21 13:39:57 +0100246 "echo"
247
248#undef CONFIG_BOOTARGS
249
Stefan Roesed1c1ba82008-05-08 10:48:58 +0200250#define xstr(s) str(s)
251#define str(s) #s
252
Stefan Roese16c0cc12007-03-21 13:39:57 +0100253#define CONFIG_EXTRA_ENV_SETTINGS \
254 "netdev=eth0\0" \
255 "hostname=acadia\0" \
256 "nfsargs=setenv bootargs root=/dev/nfs rw " \
257 "nfsroot=${serverip}:${rootpath}\0" \
258 "ramargs=setenv bootargs root=/dev/ram rw\0" \
259 "addip=setenv bootargs ${bootargs} " \
260 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
261 ":${hostname}:${netdev}:off panic=1\0" \
262 "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
263 "flash_nfs=run nfsargs addip addtty;" \
264 "bootm ${kernel_addr}\0" \
265 "flash_self=run ramargs addip addtty;" \
266 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
267 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
268 "bootm\0" \
269 "rootpath=/opt/eldk/ppc_4xx\0" \
270 "bootfile=acadia/uImage\0" \
271 "kernel_addr=fff10000\0" \
272 "ramdisk_addr=fff20000\0" \
273 "initrd_high=30000000\0" \
274 "load=tftp 200000 acadia/u-boot.bin\0" \
Stefan Roesed1c1ba82008-05-08 10:48:58 +0200275 "update=protect off " xstr(CFG_MONITOR_BASE) " FFFFFFFF;" \
276 "era " xstr(CFG_MONITOR_BASE) " FFFFFFFF;" \
277 "cp.b ${fileaddr} " xstr(CFG_MONITOR_BASE) " ${filesize};" \
Stefan Roese16c0cc12007-03-21 13:39:57 +0100278 "setenv filesize;saveenv\0" \
Stefan Roesec440bfe2007-06-06 11:42:13 +0200279 "upd=run load update\0" \
280 "nload=tftp 200000 acadia/u-boot-nand.bin\0" \
281 "nupdate=nand erase 0 60000;nand write 200000 0 60000;" \
282 "setenv filesize;saveenv\0" \
283 "nupd=run nload nupdate\0" \
Stefan Roese16c0cc12007-03-21 13:39:57 +0100284 "kozio=bootm ffc60000\0" \
285 ""
286#define CONFIG_BOOTCOMMAND "run flash_self"
287
288#if 0
289#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
290#else
291#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
292#endif
293
294#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
295#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
296
Stefan Roese16c0cc12007-03-21 13:39:57 +0100297#define CONFIG_USB_OHCI
298#define CONFIG_USB_STORAGE
299
Stefan Roese16c0cc12007-03-21 13:39:57 +0100300/* Partitions */
301#define CONFIG_MAC_PARTITION
302#define CONFIG_DOS_PARTITION
303#define CONFIG_ISO_PARTITION
304
305#define CONFIG_SUPPORT_VFAT
306
Jon Loeliger0b361c92007-07-04 22:31:42 -0500307/*
Jon Loeliger079a1362007-07-10 10:12:10 -0500308 * BOOTP options
309 */
310#define CONFIG_BOOTP_BOOTFILESIZE
311#define CONFIG_BOOTP_BOOTPATH
312#define CONFIG_BOOTP_GATEWAY
313#define CONFIG_BOOTP_HOSTNAME
314
315
316/*
Jon Loeliger0b361c92007-07-04 22:31:42 -0500317 * Command line configuration.
318 */
319#include <config_cmd_default.h>
320
321#define CONFIG_CMD_ASKENV
322#define CONFIG_CMD_DHCP
323#define CONFIG_CMD_DTT
324#define CONFIG_CMD_DIAG
325#define CONFIG_CMD_EEPROM
326#define CONFIG_CMD_ELF
327#define CONFIG_CMD_FAT
328#define CONFIG_CMD_I2C
329#define CONFIG_CMD_IRQ
330#define CONFIG_CMD_MII
331#define CONFIG_CMD_NAND
332#define CONFIG_CMD_NET
333#define CONFIG_CMD_NFS
334#define CONFIG_CMD_PCI
335#define CONFIG_CMD_PING
336#define CONFIG_CMD_REGINFO
337#define CONFIG_CMD_USB
338
339/*
340 * No NOR on Acadia when NAND-booting
341 */
342#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
343#undef CONFIG_CMD_FLASH
344#undef CONFIG_CMD_IMLS
345#endif
346
Stefan Roese16c0cc12007-03-21 13:39:57 +0100347#undef CONFIG_WATCHDOG /* watchdog disabled */
348
Stefan Roese3cb86f32007-03-24 15:45:34 +0100349/*-----------------------------------------------------------------------
Stefan Roese16c0cc12007-03-21 13:39:57 +0100350 * Miscellaneous configurable options
Stefan Roese3cb86f32007-03-24 15:45:34 +0100351 *----------------------------------------------------------------------*/
Stefan Roese16c0cc12007-03-21 13:39:57 +0100352#define CFG_LONGHELP /* undef to save memory */
Stefan Roese3cb86f32007-03-24 15:45:34 +0100353#define CFG_PROMPT "=> " /* Monitor Command Prompt */
Jon Loeliger0b361c92007-07-04 22:31:42 -0500354#if defined(CONFIG_CMD_KGDB)
Stefan Roese3cb86f32007-03-24 15:45:34 +0100355#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
Stefan Roese16c0cc12007-03-21 13:39:57 +0100356#else
Stefan Roese3cb86f32007-03-24 15:45:34 +0100357#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
Stefan Roese16c0cc12007-03-21 13:39:57 +0100358#endif
Stefan Roese3cb86f32007-03-24 15:45:34 +0100359#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
360#define CFG_MAXARGS 16 /* max number of command args */
361#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
Stefan Roese16c0cc12007-03-21 13:39:57 +0100362
Stefan Roese3cb86f32007-03-24 15:45:34 +0100363#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
364#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
Stefan Roese16c0cc12007-03-21 13:39:57 +0100365
Stefan Roese3cb86f32007-03-24 15:45:34 +0100366#define CFG_LOAD_ADDR 0x100000 /* default load address */
Stefan Roese16c0cc12007-03-21 13:39:57 +0100367#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
368
Stefan Roese3cb86f32007-03-24 15:45:34 +0100369#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
Stefan Roese16c0cc12007-03-21 13:39:57 +0100370
371#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
Stefan Roese3cb86f32007-03-24 15:45:34 +0100372#define CONFIG_LOOPW 1 /* enable loopw command */
373#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
Stefan Roese16c0cc12007-03-21 13:39:57 +0100374#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
375#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
376
Stefan Roese16c0cc12007-03-21 13:39:57 +0100377/*
378 * For booting Linux, the board info and command line data
379 * have to be in the first 8 MB of memory, since this is
380 * the maximum mapped by the Linux kernel during initialization.
381 */
382#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
383
Stefan Roese16c0cc12007-03-21 13:39:57 +0100384/*-----------------------------------------------------------------------
385 * NAND FLASH
386 *----------------------------------------------------------------------*/
387#define CFG_MAX_NAND_DEVICE 1
388#define NAND_MAX_CHIPS 1
Stefan Roese3cb86f32007-03-24 15:45:34 +0100389#define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS)
Stefan Roese16c0cc12007-03-21 13:39:57 +0100390#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
Stefan Roese16c0cc12007-03-21 13:39:57 +0100391
392/*-----------------------------------------------------------------------
Stefan Roese16c0cc12007-03-21 13:39:57 +0100393 * External Bus Controller (EBC) Setup
Stefan Roese3cb86f32007-03-24 15:45:34 +0100394 *----------------------------------------------------------------------*/
Stefan Roesec440bfe2007-06-06 11:42:13 +0200395#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
396#define CFG_NAND_CS 3
Stefan Roese3cb86f32007-03-24 15:45:34 +0100397/* Memory Bank 0 (Flash) initialization */
Stefan Roese16c0cc12007-03-21 13:39:57 +0100398#define CFG_EBC_PB0AP 0x03337200
Stefan Roese3cb86f32007-03-24 15:45:34 +0100399#define CFG_EBC_PB0CR 0xfe0bc000
Stefan Roese16c0cc12007-03-21 13:39:57 +0100400
Stefan Roesec440bfe2007-06-06 11:42:13 +0200401/* Memory Bank 3 (NAND-FLASH) initialization */
402#define CFG_EBC_PB3AP 0x018003c0
403#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000)
404
Stefan Roese3cb86f32007-03-24 15:45:34 +0100405/* Just initial configuration for CRAM. Will be changed in memory.c to sync mode*/
406/* Memory Bank 1 (CRAM) initialization */
Stefan Roese16c0cc12007-03-21 13:39:57 +0100407#define CFG_EBC_PB1AP 0x030400c0
408#define CFG_EBC_PB1CR 0x000bc000
409
Stefan Roese3cb86f32007-03-24 15:45:34 +0100410/* Memory Bank 2 (CRAM) initialization */
Stefan Roese16c0cc12007-03-21 13:39:57 +0100411#define CFG_EBC_PB2AP 0x030400c0
412#define CFG_EBC_PB2CR 0x020bc000
Stefan Roesec440bfe2007-06-06 11:42:13 +0200413#else
414#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
415/* Memory Bank 0 (NAND-FLASH) initialization */
416#define CFG_EBC_PB0AP 0x018003c0
417#define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1c000)
Stefan Roese16c0cc12007-03-21 13:39:57 +0100418
Stefan Roesec440bfe2007-06-06 11:42:13 +0200419/*
420 * When NAND-booting the CRAM EBC setup must be done in sync mode, since the
421 * NAND-SPL already initialized the CRAM and EBC to sync mode.
422 */
423/* Memory Bank 1 (CRAM) initialization */
424#define CFG_EBC_PB1AP 0x9C0201C0
425#define CFG_EBC_PB1CR 0x000bc000
426
427/* Memory Bank 2 (CRAM) initialization */
428#define CFG_EBC_PB2AP 0x9C0201C0
429#define CFG_EBC_PB2CR 0x020bc000
430#endif
Stefan Roese16c0cc12007-03-21 13:39:57 +0100431
Stefan Roese3cb86f32007-03-24 15:45:34 +0100432/* Memory Bank 4 (CPLD) initialization */
Stefan Roese16c0cc12007-03-21 13:39:57 +0100433#define CFG_EBC_PB4AP 0x04006000
Stefan Roese3cb86f32007-03-24 15:45:34 +0100434#define CFG_EBC_PB4CR (CFG_CPLD_BASE | 0x18000)
Stefan Roese16c0cc12007-03-21 13:39:57 +0100435
436#define CFG_EBC_CFG 0xf8400000
437
438/*-----------------------------------------------------------------------
Stefan Roese3cb86f32007-03-24 15:45:34 +0100439 * GPIO Setup
440 *----------------------------------------------------------------------*/
441#define CFG_GPIO_CRAM_CLK 8
Stefan Roesec440bfe2007-06-06 11:42:13 +0200442#define CFG_GPIO_CRAM_WAIT 9 /* GPIO-In */
Stefan Roese3cb86f32007-03-24 15:45:34 +0100443#define CFG_GPIO_CRAM_ADV 10
Stefan Roesec440bfe2007-06-06 11:42:13 +0200444#define CFG_GPIO_CRAM_CRE (32 + 21) /* GPIO-Out */
Stefan Roese3cb86f32007-03-24 15:45:34 +0100445
446/*-----------------------------------------------------------------------
Stefan Roese16c0cc12007-03-21 13:39:57 +0100447 * Definitions for GPIO_0 setup (PPC405EZ specific)
448 *
Stefan Roese5d4a1792007-05-24 08:22:09 +0200449 * GPIO0[0-2] - External Bus Controller CS_4 - CS_6 Outputs
450 * GPIO0[3] - NAND FLASH Controller CE3 (NFCE3) Output
Stefan Roese16c0cc12007-03-21 13:39:57 +0100451 * GPIO0[4] - External Bus Controller Hold Input
452 * GPIO0[5] - External Bus Controller Priority Input
453 * GPIO0[6] - External Bus Controller HLDA Output
454 * GPIO0[7] - External Bus Controller Bus Request Output
455 * GPIO0[8] - CRAM Clk Output
456 * GPIO0[9] - External Bus Controller Ready Input
457 * GPIO0[10] - CRAM Adv Output
458 * GPIO0[11-24] - NAND Flash Control Data -> Bypasses GPIO when enabled
459 * GPIO0[25] - External DMA Request Input
460 * GPIO0[26] - External DMA EOT I/O
461 * GPIO0[25] - External DMA Ack_n Output
462 * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
463 * GPIO0[28-30] - Trace Outputs / PWM Inputs
464 * GPIO0[31] - PWM_8 I/O
465 */
Stefan Roesec440bfe2007-06-06 11:42:13 +0200466#define CFG_GPIO0_TCR 0xC0A00000
467#define CFG_GPIO0_OSRL 0x50004400
Stefan Roese5d4a1792007-05-24 08:22:09 +0200468#define CFG_GPIO0_OSRH 0x02000055
Stefan Roesec440bfe2007-06-06 11:42:13 +0200469#define CFG_GPIO0_ISR1L 0x00001000
Stefan Roese16c0cc12007-03-21 13:39:57 +0100470#define CFG_GPIO0_ISR1H 0x00000055
Stefan Roese5d4a1792007-05-24 08:22:09 +0200471#define CFG_GPIO0_TSRL 0x02000000
Stefan Roese16c0cc12007-03-21 13:39:57 +0100472#define CFG_GPIO0_TSRH 0x00000055
473
474/*-----------------------------------------------------------------------
475 * Definitions for GPIO_1 setup (PPC405EZ specific)
476 *
477 * GPIO1[0-6] - PWM_9 to PWM_15 I/O
478 * GPIO1[7] - PWM_DIV_CLK (Out) / IRQ4 Input
479 * GPIO1[8] - TS5 Output / DAC_IP_TRIG Input
480 * GPIO1[9] - TS6 Output / ADC_IP_TRIG Input
481 * GPIO1[10-12] - UART0 Control Inputs
482 * GPIO1[13] - UART0_DTR_N Output/IEEE_1588_TS Output/TMRCLK Input
483 * GPIO1[14] - UART0_RTS_N Output/SPI_SS_2_N Output
484 * GPIO1[15] - SPI_SS_3_N Output/UART0_RI_N Input
485 * GPIO1[16] - SPI_SS_1_N Output
486 * GPIO1[17-20] - Trace Output/External Interrupts IRQ0 - IRQ3 inputs
487 */
Stefan Roesec440bfe2007-06-06 11:42:13 +0200488#define CFG_GPIO1_TCR 0xFFFF8414
Stefan Roese16c0cc12007-03-21 13:39:57 +0100489#define CFG_GPIO1_OSRL 0x40000110
Stefan Roesec440bfe2007-06-06 11:42:13 +0200490#define CFG_GPIO1_OSRH 0x55455555
Stefan Roese16c0cc12007-03-21 13:39:57 +0100491#define CFG_GPIO1_ISR1L 0x15555445
Stefan Roesec440bfe2007-06-06 11:42:13 +0200492#define CFG_GPIO1_ISR1H 0x00000000
Stefan Roese16c0cc12007-03-21 13:39:57 +0100493#define CFG_GPIO1_TSRL 0x00000000
Stefan Roesec440bfe2007-06-06 11:42:13 +0200494#define CFG_GPIO1_TSRH 0x00000000
Stefan Roese16c0cc12007-03-21 13:39:57 +0100495
Stefan Roese16c0cc12007-03-21 13:39:57 +0100496/*
497 * Internal Definitions
498 *
499 * Boot Flags
500 */
501#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
502#define BOOTFLAG_WARM 0x02 /* Software reboot */
503
Jon Loeliger0b361c92007-07-04 22:31:42 -0500504#if defined(CONFIG_CMD_KGDB)
Stefan Roese16c0cc12007-03-21 13:39:57 +0100505 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
506 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
507#endif
508
Stefan Roesed1c1ba82008-05-08 10:48:58 +0200509/* pass open firmware flat tree */
510#define CONFIG_OF_LIBFDT 1
511#define CONFIG_OF_BOARD_SETUP 1
512
Stefan Roese16c0cc12007-03-21 13:39:57 +0100513#endif /* __CONFIG_H */