blob: ddcd591f84a3b0bd08c12bf890cf89b750d850d5 [file] [log] [blame]
wdenk39539882004-07-01 16:30:44 +00001/*
2 * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
3 * Curt Brune <curt@cucy.com>
4 *
5 * (C) Copyright 2004
6 * DAVE Srl
7 * http://www.dave-tech.it
8 * http://www.wawnet.biz
9 * mailto:info@wawnet.biz
10 *
11 * (C) Copyright 2002-2004
12 * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
13 *
14 * (C) Copyright 2002
15 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
16 * Marius Groeger <mgroeger@sysgo.de>
17 *
18 * (C) Copyright 2002
19 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
20 * Alex Zuepke <azu@sysgo.de>
21 *
22 * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
23 *
24 * This program is free software; you can redistribute it and/or modify
25 * it under the terms of the GNU General Public License as published by
26 * the Free Software Foundation; either version 2 of the License, or
27 * (at your option) any later version.
28 *
29 * This program is distributed in the hope that it will be useful,
30 * but WITHOUT ANY WARRANTY; without even the implied warranty of
31 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
32 * GNU General Public License for more details.
33 *
34 * You should have received a copy of the GNU General Public License
35 * along with this program; if not, write to the Free Software
36 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
37 *
38 * MODULE: $Id:$
39 * Description: UART/Serial interface for Samsung S3C4510B SoC
40 * Runtime Env: ARM7TDMI
41 * Change History:
42 * 03-02-04 Create (Curt Brune) curt@cucy.com
43 *
44 */
45
46#include <common.h>
47
48#ifdef CONFIG_DRIVER_S3C4510_UART
49
50#include <asm/hardware.h>
51#include "s3c4510b_uart.h"
52
Wolfgang Denkd87080b2006-03-31 18:32:53 +020053DECLARE_GLOBAL_DATA_PTR;
54
wdenk39539882004-07-01 16:30:44 +000055static UART *uart;
56
57/* flush serial input queue. returns 0 on success or negative error
58 * number otherwise
59 */
60static int serial_flush_input(void)
61{
62 volatile u32 tmp;
63
64 /* keep on reading as long as the receiver is not empty */
65 while( uart->m_stat.bf.rxReady) {
66 tmp = uart->m_rx;
67 }
68
69 return 0;
70}
71
72
73/* flush output queue. returns 0 on success or negative error number
74 * otherwise
75 */
76static int serial_flush_output(void)
77{
78 /* wait until the transmitter is no longer busy */
79 while( !uart->m_stat.bf.txBufEmpty);
80
81 return 0;
82}
83
84
85void serial_setbrg (void)
86{
wdenk39539882004-07-01 16:30:44 +000087 UART_LINE_CTRL ulctrl;
88 UART_CTRL uctrl;
89 UART_BAUD_DIV ubd;
90
91 serial_flush_output();
92 serial_flush_input();
93
94 /* control register */
95 uctrl.ui = 0x0;
96 uctrl.bf.rxMode = 0x1;
97 uctrl.bf.rxIrq = 0x0;
98 uctrl.bf.txMode = 0x1;
99 uctrl.bf.DSR = 0x0;
100 uctrl.bf.sendBreak = 0x0;
101 uctrl.bf.loopBack = 0x0;
102 uart->m_ctrl.ui = uctrl.ui;
103
104 /* line control register */
105 ulctrl.ui = 0x0;
106 ulctrl.bf.wordLen = 0x3; /* 8 bit data */
107 ulctrl.bf.nStop = 0x0; /* 1 stop bit */
108 ulctrl.bf.parity = 0x0; /* no parity */
109 ulctrl.bf.clk = 0x0; /* internal clock */
110 ulctrl.bf.infra_red = 0x0; /* no infra_red */
111 uart->m_lineCtrl.ui = ulctrl.ui;
112
113 ubd.ui = 0x0;
114
115 /* see table on page 10-15 in SAMSUNG S3C4510B manual */
116 /* get correct divisor */
117 switch(gd->baudrate) {
118 case 1200: ubd.bf.cnt0 = 1301; break;
119 case 2400: ubd.bf.cnt0 = 650; break;
120 case 4800: ubd.bf.cnt0 = 324; break;
121 case 9600: ubd.bf.cnt0 = 162; break;
122 case 19200: ubd.bf.cnt0 = 80; break;
123 case 38400: ubd.bf.cnt0 = 40; break;
124 case 57600: ubd.bf.cnt0 = 26; break;
125 case 115200: ubd.bf.cnt0 = 13; break;
126 }
127
128 uart->m_baudDiv.ui = ubd.ui;
129 uart->m_baudCnt = 0x0;
130 uart->m_baudClk = 0x0;
131
132}
133
134
135/*
136 * Initialise the serial port with the given baudrate. The settings
137 * are always 8 data bits, no parity, 1 stop bit, no start bits.
138 *
139 */
140int serial_init (void)
141{
142
143#if CONFIG_SERIAL1 == 1
144 uart = (UART *)UART0_BASE;
145#elif CONFIG_SERIAL1 == 2
146 uart = (UART *)UART1_BASE;
147#else
148#error CONFIG_SERIAL1 not equal to 1 or 2
149#endif
150
151 serial_setbrg ();
152
153 return (0);
154}
155
156
157/*
158 * Output a single byte to the serial port.
159 */
160void serial_putc (const char c)
161{
162 /* wait for room in the transmit FIFO */
163 while( !uart->m_stat.bf.txBufEmpty);
164
165 uart->m_tx = c;
166
167 /*
168 to be polite with serial console add a line feed
169 to the carriage return character
170 */
171 if (c=='\n')
172 serial_putc('\r');
173}
174
175/*
176 * Test if an input byte is ready from the serial port. Returns non-zero on
177 * success, 0 otherwise.
178 */
179int serial_tstc (void)
180{
181 return uart->m_stat.bf.rxReady;
182}
183
184/*
185 * Read a single byte from the serial port. Returns 1 on success, 0
186 * otherwise. When the function is succesfull, the character read is
187 * written into its argument c.
188 */
189int serial_getc (void)
190{
191 int rv;
192
193 for(;;) {
194 rv = serial_tstc();
195
196 if (rv) {
197 return uart->m_rx & 0xFF;
198 }
199 }
200}
201
202void serial_puts (const char *s)
203{
204 while (*s) {
205 serial_putc (*s++);
206 }
207
208 /* busy wait for tx complete */
209 while ( !uart->m_stat.bf.txComplete);
210
211 /* clear break */
212 uart->m_ctrl.bf.sendBreak = 0;
213
214}
215
216#endif