Chris Packham | 87a62bc | 2018-05-30 20:14:35 +1200 | [diff] [blame] | 1 | /* SPDX-License-Identifier: GPL-2.0+ */ |
| 2 | /* |
| 3 | * (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz> |
| 4 | */ |
| 5 | |
| 6 | #ifndef _CONFIG_SBX81LIFKW_H |
| 7 | #define _CONFIG_SBX81LIFKW_H |
| 8 | |
| 9 | /* |
| 10 | * High Level Configuration Options (easy to change) |
| 11 | */ |
| 12 | #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ |
| 13 | #define CONFIG_KW88F6281 1 /* SOC Name */ |
Chris Packham | 87a62bc | 2018-05-30 20:14:35 +1200 | [diff] [blame] | 14 | #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg |
Chris Packham | 87a62bc | 2018-05-30 20:14:35 +1200 | [diff] [blame] | 15 | |
| 16 | /* additions for new ARM relocation support */ |
| 17 | #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
| 18 | |
| 19 | #define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ |
| 20 | #define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ |
| 21 | #define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */ |
| 22 | #define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ |
| 23 | #define CONFIG_KIRKWOOD_GPIO 1 |
| 24 | |
Chris Packham | 87a62bc | 2018-05-30 20:14:35 +1200 | [diff] [blame] | 25 | /* |
| 26 | * NS16550 Configuration |
| 27 | */ |
| 28 | #define CONFIG_SYS_NS16550 |
| 29 | #define CONFIG_SYS_NS16550_SERIAL |
| 30 | #define CONFIG_SYS_NS16550_REG_SIZE (-4) |
| 31 | #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK |
| 32 | #define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE |
| 33 | |
| 34 | /* |
| 35 | * Serial Port configuration |
| 36 | * The following definitions let you select what serial you want to use |
| 37 | * for your console driver. |
| 38 | */ |
| 39 | |
Chris Packham | 87a62bc | 2018-05-30 20:14:35 +1200 | [diff] [blame] | 40 | #define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)" |
| 41 | #define MTDPARTS_MTDOOPS "errlog" |
| 42 | #define CONFIG_DOS_PARTITION |
| 43 | |
| 44 | /* |
| 45 | * Environment variables configurations |
| 46 | */ |
Chris Packham | 87a62bc | 2018-05-30 20:14:35 +1200 | [diff] [blame] | 47 | |
| 48 | /* |
| 49 | * U-Boot bootcode configuration |
| 50 | */ |
| 51 | |
| 52 | #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for monitor */ |
Chris Packham | 87a62bc | 2018-05-30 20:14:35 +1200 | [diff] [blame] | 53 | |
Chris Packham | 87a62bc | 2018-05-30 20:14:35 +1200 | [diff] [blame] | 54 | #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/ |
| 55 | |
| 56 | /* size in bytes reserved for initial data */ |
| 57 | |
| 58 | #include <asm/arch/config.h> |
| 59 | /* There is no PHY directly connected so don't ask it for link status */ |
| 60 | #undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN |
| 61 | |
| 62 | /* |
Chris Packham | 87a62bc | 2018-05-30 20:14:35 +1200 | [diff] [blame] | 63 | * Ethernet Driver configuration |
| 64 | */ |
| 65 | #ifdef CONFIG_CMD_NET |
Chris Packham | 87a62bc | 2018-05-30 20:14:35 +1200 | [diff] [blame] | 66 | #define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ |
| 67 | #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ |
| 68 | #define CONFIG_PHY_BASE_ADR 0x01 |
Chris Packham | 87a62bc | 2018-05-30 20:14:35 +1200 | [diff] [blame] | 69 | #endif /* CONFIG_CMD_NET */ |
| 70 | |
Chris Packham | 87a62bc | 2018-05-30 20:14:35 +1200 | [diff] [blame] | 71 | #endif /* _CONFIG_SBX81LIFKW_H */ |