blob: 12f35ae1f4a71e8313207415111284d36f267e9a [file] [log] [blame]
Stefan Roese34167a32007-01-18 11:48:10 +01001/*
2 * (C) Copyright 2007
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License as
7 * published by the Free Software Foundation; either version 2 of
8 * the License, or (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
18 * MA 02111-1307 USA
19 */
20
21/************************************************************************
22 * TAISHAN.h - configuration for AMCC 440GX Ref
23 ***********************************************************************/
24
25#ifndef __CONFIG_H
26#define __CONFIG_H
27
28/*-----------------------------------------------------------------------
29 * High Level Configuration Options
30 *----------------------------------------------------------------------*/
31#define CONFIG_TAISHAN 1 /* Board is taishan */
32#define CONFIG_440GX 1 /* Specifc GX support */
Grzegorz Bernackiefa35cf2007-06-15 11:19:28 +020033#define CONFIG_440 1 /* ... PPC440 family */
Stefan Roese34167a32007-01-18 11:48:10 +010034#define CONFIG_4xx 1 /* ... PPC4xx family */
Stefan Roese34167a32007-01-18 11:48:10 +010035#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
36
Wolfgang Denk2ae18242010-10-06 09:05:45 +020037#define CONFIG_SYS_TEXT_BASE 0xFFFC0000
38
Stefan Roese72675dc2008-06-06 15:55:21 +020039/*
40 * Include common defines/options for all AMCC eval boards
41 */
42#define CONFIG_HOSTNAME taishan
43#define CONFIG_USE_TTY ttyS1
44#include "amcc-common.h"
45
Stefan Roese34167a32007-01-18 11:48:10 +010046#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
47#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
48
49/*-----------------------------------------------------------------------
50 * Base addresses -- Note these are effective addresses where the
51 * actual resources get mapped (not physical addresses)
52 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020053#define CONFIG_SYS_FLASH_BASE 0xfc000000 /* start of FLASH */
54#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020055#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */
56#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
Stefan Roese34167a32007-01-18 11:48:10 +010057
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020058#define CONFIG_SYS_EBC0_FLASH_BASE CONFIG_SYS_FLASH_BASE
59#define CONFIG_SYS_EBC1_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x01000000)
60#define CONFIG_SYS_EBC2_LCM_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x02000000)
61#define CONFIG_SYS_EBC3_CONN_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
Stefan Roese34167a32007-01-18 11:48:10 +010062
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020063#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
Stefan Roese34167a32007-01-18 11:48:10 +010064
65/*-----------------------------------------------------------------------
66 * Initial RAM & stack pointer (placed in internal SRAM)
67 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020068#define CONFIG_SYS_TEMP_STACK_OCM 1
69#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
70#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
71#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM*/
72#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data*/
Stefan Roese34167a32007-01-18 11:48:10 +010073
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020074#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
Michael Zaidman800eb092010-09-20 08:51:53 +020075#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
Stefan Roese34167a32007-01-18 11:48:10 +010076
Stefan Roese34167a32007-01-18 11:48:10 +010077/*-----------------------------------------------------------------------
78 * Serial Port
79 *----------------------------------------------------------------------*/
Stefan Roese550650d2010-09-20 16:05:31 +020080#define CONFIG_CONS_INDEX 2 /* Use UART1 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020081#define CONFIG_SYS_EXT_SERIAL_CLOCK (1843200 * 6) /* Ext clk @ 11.059 MHz */
Stefan Roese34167a32007-01-18 11:48:10 +010082
83/*-----------------------------------------------------------------------
84 * Environment
85 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +020086#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
Stefan Roese34167a32007-01-18 11:48:10 +010087
88/*-----------------------------------------------------------------------
89 * FLASH related
90 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020091#define CONFIG_SYS_FLASH_CFI
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +020092#define CONFIG_FLASH_CFI_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020093#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
94#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
Stefan Roese34167a32007-01-18 11:48:10 +010095
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020096#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
97#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
98#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
Stefan Roese34167a32007-01-18 11:48:10 +010099
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200100#undef CONFIG_SYS_FLASH_CHECKSUM
101#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
102#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
Stefan Roese34167a32007-01-18 11:48:10 +0100103
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200104#define CONFIG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200105#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200106#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
Stefan Roese34167a32007-01-18 11:48:10 +0100107
108/* Address and size of Redundant Environment Sector */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200109#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
110#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
Stefan Roese34167a32007-01-18 11:48:10 +0100111
112/*-----------------------------------------------------------------------
113 * E2PROM bootstrap configure value
114 *----------------------------------------------------------------------*/
115
116/*
117 * 800/133/66
118 * IIC 0~15: 86 78 11 6a 61 A7 04 62 00 00 00 00 00 00 00 00
119 */
120
121/*
122 * 800/160/80
123 * IIC 0~15: 86 78 c1 a6 09 67 04 63 00 00 00 00 00 00 00 00
124 */
125
126/*-----------------------------------------------------------------------
127 * DDR SDRAM
128 *----------------------------------------------------------------------*/
129#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
130#define CONFIG_SDRAM_BANK0 1 /* init onboard DDR SDRAM bank 0 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200131#define CONFIG_SYS_SDRAM0_TR0 0xC10A401A
Stefan Roese34167a32007-01-18 11:48:10 +0100132#undef CONFIG_SDRAM_ECC /* enable ECC support */
133
134/*-----------------------------------------------------------------------
135 * I2C
136 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200137#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
Stefan Roese34167a32007-01-18 11:48:10 +0100138
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200139#undef CONFIG_SYS_I2C_MULTI_EEPROMS
140#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
141#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
142#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
143#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
Stefan Roese34167a32007-01-18 11:48:10 +0100144
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200145#define CONFIG_SYS_BOOTSTRAP_IIC_ADDR 0x50
Stefan Roese34167a32007-01-18 11:48:10 +0100146
147/* I2C SYSMON (LM75, AD7414 is almost compatible) */
148#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
149#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200150#define CONFIG_SYS_DTT_MAX_TEMP 70
151#define CONFIG_SYS_DTT_LOW_TEMP -30
152#define CONFIG_SYS_DTT_HYSTERESIS 3
Stefan Roese34167a32007-01-18 11:48:10 +0100153
Stefan Roese72675dc2008-06-06 15:55:21 +0200154/*
155 * Default environment variables
156 */
Stefan Roese34167a32007-01-18 11:48:10 +0100157#define CONFIG_EXTRA_ENV_SETTINGS \
Stefan Roese72675dc2008-06-06 15:55:21 +0200158 CONFIG_AMCC_DEF_ENV \
159 CONFIG_AMCC_DEF_ENV_POWERPC \
160 CONFIG_AMCC_DEF_ENV_PPC_OLD \
161 CONFIG_AMCC_DEF_ENV_NOR_UPD \
Stefan Roese34167a32007-01-18 11:48:10 +0100162 "kernel_addr=fc000000\0" \
163 "ramdisk_addr=fc180000\0" \
Stefan Roese34167a32007-01-18 11:48:10 +0100164 "kozio=bootm 0xffe00000\0" \
165 ""
Stefan Roese34167a32007-01-18 11:48:10 +0100166
167/*-----------------------------------------------------------------------
168 * Networking
169 *----------------------------------------------------------------------*/
170#define CONFIG_EMAC_NR_START 2 /* start with EMAC 2 (skip 0&1) */
Wolfgang Denk1636d1c2007-06-22 23:59:00 +0200171#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */
172#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */
Stefan Roese34167a32007-01-18 11:48:10 +0100173#define CONFIG_PHY2_ADDR 0x1
174#define CONFIG_PHY3_ADDR 0x3
175#define CONFIG_ET1011C_PHY 1
176#define CONFIG_HAS_ETH0
177#define CONFIG_HAS_ETH1
178#define CONFIG_HAS_ETH2
179#define CONFIG_HAS_ETH3
180#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
181#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
182#define CONFIG_PHY_RESET_DELAY 1000
Stefan Roese34167a32007-01-18 11:48:10 +0100183
Jon Loeliger6c18eb92007-07-04 22:33:38 -0500184/*
Stefan Roese72675dc2008-06-06 15:55:21 +0200185 * Commands additional to the ones defined in amcc-common.h
Jon Loeliger079a1362007-07-10 10:12:10 -0500186 */
Jon Loeliger6c18eb92007-07-04 22:33:38 -0500187#define CONFIG_CMD_DTT
Jon Loeliger6c18eb92007-07-04 22:33:38 -0500188#define CONFIG_CMD_PCI
Stefan Roese34167a32007-01-18 11:48:10 +0100189
190/*-----------------------------------------------------------------------
191 * PCI stuff
192 *-----------------------------------------------------------------------
193 */
194/* General PCI */
195#define CONFIG_PCI /* include pci support */
196#define CONFIG_PCI_PNP /* do pci plug-and-play */
197#define CONFIG_EEPRO100 1 /* include PCI EEPRO100 */
198#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200199#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
Stefan Roese34167a32007-01-18 11:48:10 +0100200
201/* Board-specific PCI */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200202#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */
Stefan Roese34167a32007-01-18 11:48:10 +0100203
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200204#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
205#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
Stefan Roese34167a32007-01-18 11:48:10 +0100206
Stefan Roese34167a32007-01-18 11:48:10 +0100207#endif /* __CONFIG_H */