blob: cb03e33b6e133a71f6b5d962dae32abeaf981bdf [file] [log] [blame]
Stefan Roesedd580802014-10-22 12:13:18 +02001/*
2 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#ifndef _CONFIG_DB_MV7846MP_GP_H
8#define _CONFIG_DB_MV7846MP_GP_H
9
10/*
11 * High Level Configuration Options (easy to change)
12 */
13#define CONFIG_ARMADA_XP /* SOC Family Name */
14#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
15#define CONFIG_SYS_GENERIC_BOARD
16#define CONFIG_DISPLAY_BOARDINFO_LATE
17
18#define CONFIG_SYS_TEXT_BASE 0x04000000
19#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
20
21/*
22 * Commands configuration
23 */
24#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
25#include <config_cmd_default.h>
26#define CONFIG_CMD_DHCP
27#define CONFIG_CMD_ENV
28#define CONFIG_CMD_I2C
29#define CONFIG_CMD_PING
30#define CONFIG_CMD_SF
31#define CONFIG_CMD_SPI
32#define CONFIG_CMD_TFTPPUT
33#define CONFIG_CMD_TIME
34
35/* I2C */
36#define CONFIG_SYS_I2C
37#define CONFIG_SYS_I2C_MVTWSI
38#define CONFIG_I2C_MVTWSI_BASE MVEBU_TWSI_BASE
39#define CONFIG_SYS_I2C_SLAVE 0x0
40#define CONFIG_SYS_I2C_SPEED 100000
41
42/* SPI NOR flash default params, used by sf commands */
43#define CONFIG_SF_DEFAULT_SPEED 1000000
44#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
45#define CONFIG_SPI_FLASH_STMICRO
46
47/* Environment in SPI NOR flash */
48#define CONFIG_ENV_IS_IN_SPI_FLASH
49#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */
50#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
51#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
52
53#define CONFIG_PHY_MARVELL /* there is a marvell phy */
54#define CONFIG_PHY_BASE_ADDR 0x10
55#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_QSGMII
56#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
57#define CONFIG_RESET_PHY_R
58
59#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
60#define CONFIG_SYS_ALT_MEMTEST
61
62/*
63 * mv-common.h should be defined after CMD configs since it used them
64 * to enable certain macros
65 */
66#include "mv-common.h"
67
68#endif /* _CONFIG_DB_MV7846MP_GP_H */