blob: 46e8c90b455ee61e62449a2d66893dce95efd7bb [file] [log] [blame]
Marek Vasut0ec005f2012-07-03 03:02:20 +00001/*
2 * Copyright (C) 2012 Marek Vasut <marex@denx.de>
3 * on behalf of DENX Software Engineering GmbH
4 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02005 * SPDX-License-Identifier: GPL-2.0+
Marek Vasut0ec005f2012-07-03 03:02:20 +00006 */
7
8#ifndef __CONFIG_TK71_H__
9#define __CONFIG_TK71_H__
10
11/*
12 * Version number information
13 */
14#define CONFIG_IDENT_STRING "\nKa-Ro TK71"
15
16/*
17 * High Level Configuration Options (easy to change)
18 */
19#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
Marek Vasut0ec005f2012-07-03 03:02:20 +000020#define CONFIG_KW88F6281 1 /* SOC Name */
21#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
22#define CONFIG_NR_DRAM_BANKS 1
23
24#define MACH_TYPE_TK71 2399
25#define CONFIG_MACH_TYPE MACH_TYPE_TK71
26
27/*
28 * Commands configuration
29 */
30#define CONFIG_SYS_HUSH_PARSER
31
32#define CONFIG_SYS_NO_FLASH
33#define CONFIG_DOS_PARTITION
34#define CONFIG_SUPPORT_VFAT
35
Marek Vasut0ec005f2012-07-03 03:02:20 +000036#define CONFIG_CMD_DHCP
37#define CONFIG_CMD_ENV
38#define CONFIG_CMD_EXT2
39#define CONFIG_CMD_FAT
40#define CONFIG_CMD_MTDPARTS
41#define CONFIG_CMD_NAND
42#define CONFIG_CMD_PING
43#define CONFIG_CMD_USB
44
45/*
46 * mv-common.h should be defined after CMD configs since it used them
47 * to enable certain macros
48 */
49#include "mv-common.h"
50
51/*
52 * NAND flash
53 */
54#ifdef CONFIG_CMD_NAND
55#define CONFIG_MTD_DEVICE
56#define CONFIG_MTD_PARTITIONS
57#define CONFIG_JFFS2_NAND
58#define CONFIG_JFFS2_DEV "nand0,3"
59#endif
60
61/*
62 * Ethernet Driver configuration
63 */
64#ifdef CONFIG_CMD_NET
65#define CONFIG_MVGBE_PORTS {1, 0}
66#define CONFIG_PHY_BASE_ADR 0x08
67#endif
68
69/*
70 * USB/EHCI
71 */
72#ifdef CONFIG_CMD_USB
73#define CONFIG_USB_EHCI
74#define CONFIG_USB_EHCI_KIRKWOOD
75#define CONFIG_EHCI_IS_TDI
76#define CONFIG_USB_STORAGE
77#endif
78
79/*
80 * Environment variables configurations
81 */
82#ifdef CONFIG_CMD_NAND
83#define CONFIG_ENV_IS_IN_NAND
84#define CONFIG_ENV_SECT_SIZE 0x20000
85#else
86#define CONFIG_ENV_IS_NOWHERE
87#endif
88
89#define CONFIG_ENV_SIZE 0x20000
90#define CONFIG_ENV_ADDR 0x80000
91#define CONFIG_ENV_OFFSET 0x80000
92
93/*
94 * Default environment variables
95 */
96#define CONFIG_BOOTCOMMAND "nand read 0x800000 kernel 0x300000; bootm;"
97#define CONFIG_MTDPARTS "512K(u-boot),512K(u-boot-env),3M(kernel),-(root)"
98#define CONFIG_EXTRA_ENV_SETTINGS \
99 "update_uboot=dhcp u-boot.kwb; nand erase.part u-boot; nand write ${fileaddr} u-boot ${filesize}\0" \
100 "update_kernel=dhcp uImage-tk71; nand erase.part kernel; nand write ${fileaddr} kernel ${filesize} \0" \
101 "update_rootfs=dhcp rootfs-tk71; nand erase.part root; nand write ${fileaddr} root ${filesize}\0" \
102 "update_all=run update_uboot; run update_kernel; run update_rootfs; reset\0" \
103 "mtdids=nand0=orion_nand\0" \
104 "mtdparts=mtdparts=orion_nand:"CONFIG_MTDPARTS"\0" \
105 "bootargs=console=ttyS0,115200 mtdparts=orion_nand:"CONFIG_MTDPARTS" rootfstype=jffs2 root=/dev/mtdblock3 rw\0"
106#define MTDIDS_DEFAULT "nand0=orion_nand"
107#define MTDPARTS_DEFAULT "mtdparts=orion_nand:"CONFIG_MTDPARTS
108
109#define PHYS_SDRAM_1 0x00000000 /* Base address */
110#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
111
112#endif /* __CONFIG_TK71_H__ */