blob: 95c04c3797060814b23ae3c03522fd131b1d860c [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Stefano Babic8be4f402016-06-06 11:19:42 +02002/*
3 * Copyright (C) Stefano Babic <sbabic@denx.de>
4 *
5 * Configuration settings for the E+L i.MX6Q DO82 board.
Stefano Babic8be4f402016-06-06 11:19:42 +02006 */
7
8#ifndef __EL6Q_COMMON_CONFIG_H
9#define __EL6Q_COMMON_CONFIG_H
10
11#define CONFIG_BOARD_NAME EL6Q
12
Stefano Babic8be4f402016-06-06 11:19:42 +020013#include "mx6_common.h"
14
15#define CONFIG_IMX_THERMAL
16
17/* Size of malloc() pool */
18#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
19
Stefano Babic8be4f402016-06-06 11:19:42 +020020#define CONFIG_MXC_UART
21
22#ifdef CONFIG_SPL
Stefano Babic8be4f402016-06-06 11:19:42 +020023#include "imx6_spl.h"
24#endif
25
26/* MMC Configs */
27#define CONFIG_SYS_FSL_ESDHC_ADDR 0
28#define CONFIG_SYS_FSL_USDHC_NUM 2
29
30/* I2C config */
31#define CONFIG_SYS_I2C
32#define CONFIG_SYS_I2C_MXC
33#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
34#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
35#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
36#define CONFIG_SYS_I2C_SPEED 100000
37
38/* PMIC */
39#define CONFIG_POWER
40#define CONFIG_POWER_I2C
41#define CONFIG_POWER_PFUZE100
42#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
43
44/* Commands */
Stefano Babic8be4f402016-06-06 11:19:42 +020045
46/* allow to overwrite serial and ethaddr */
47#define CONFIG_ENV_OVERWRITE
48#define CONFIG_MXC_UART_BASE UART2_BASE
Stefano Babic8be4f402016-06-06 11:19:42 +020049
Stefano Babic8be4f402016-06-06 11:19:42 +020050#define CONFIG_BOARD_NAME EL6Q
51
Stefano Babic8be4f402016-06-06 11:19:42 +020052#define CONFIG_EXTRA_ENV_SETTINGS \
53 "board="__stringify(CONFIG_BOARD_NAME)"\0" \
54 "cma_size="__stringify(EL6Q_CMA_SIZE)"\0" \
55 "chp_size="__stringify(EL6Q_COHERENT_POOL_SIZE)"\0" \
Simon Glass12ca05a2016-10-17 20:12:39 -060056 "console=" CONSOLE_DEV "\0" \
Stefano Babic8be4f402016-06-06 11:19:42 +020057 "fdtfile=undefined\0" \
58 "fdt_high=0xffffffff\0" \
59 "fdt_addr_r=0x18000000\0" \
60 "fdt_addr=0x18000000\0" \
61 "findfdt=setenv fdtfile " CONFIG_DEFAULT_FDT_FILE "\0" \
62 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
63 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
64 "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
65 BOOTENV
66
67#define BOOT_TARGET_DEVICES(func) \
68 func(MMC, mmc, 0) \
69 func(MMC, mmc, 1) \
70 func(PXE, PXE, na) \
71 func(DHCP, dhcp, na)
72
Stefano Babic8be4f402016-06-06 11:19:42 +020073#include <config_distro_bootcmd.h>
74
75#define CONFIG_ARP_TIMEOUT 200UL
76
Stefano Babic8be4f402016-06-06 11:19:42 +020077#define CONFIG_SYS_MEMTEST_START 0x10000000
78#define CONFIG_SYS_MEMTEST_END 0x10800000
79#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
80
Stefano Babic8be4f402016-06-06 11:19:42 +020081/* Physical Memory Map */
Stefano Babic8be4f402016-06-06 11:19:42 +020082#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
83
84#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
85#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
86#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
87
88#define CONFIG_SYS_INIT_SP_OFFSET \
89 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
90#define CONFIG_SYS_INIT_SP_ADDR \
91 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
92
Masahiro Yamadae856bdc2017-02-11 22:43:54 +090093/* environment organization */
Stefano Babic8be4f402016-06-06 11:19:42 +020094
Stefano Babic8be4f402016-06-06 11:19:42 +020095#if defined(CONFIG_ENV_IS_IN_MMC)
96#define CONFIG_SYS_MMC_ENV_DEV 1
97#define CONFIG_SYS_MMC_ENV_PART 2
Stefano Babic8be4f402016-06-06 11:19:42 +020098#endif
99
100#endif /* __EL6Q_COMMON_CONFIG_H */