Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 1 | /* SPDX-License-Identifier: GPL-2.0+ */ |
| 2 | /* |
| 3 | * Copyright 2019 NXP |
| 4 | * Copyright 2022 Linaro |
| 5 | */ |
| 6 | |
| 7 | #ifndef __IMX8MP_RSB3720_H |
| 8 | #define __IMX8MP_RSB3720_H |
| 9 | |
| 10 | #include <linux/sizes.h> |
| 11 | #include <linux/stringify.h> |
| 12 | #include <asm/arch/imx-regs.h> |
| 13 | #include <config_distro_bootcmd.h> |
| 14 | |
Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 15 | #define CONFIG_SYS_MONITOR_LEN (512 * 1024) |
Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 16 | #define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) |
| 17 | |
Sughosh Ganu | 741ef86 | 2022-04-15 11:29:34 +0530 | [diff] [blame] | 18 | /* GUIDs for capsule updatable firmware images */ |
| 19 | #define IMX8MP_RSB3720A1_4G_FIT_IMAGE_GUID \ |
| 20 | EFI_GUID(0xb1251e89, 0x384a, 0x4635, 0xa8, 0x06, \ |
| 21 | 0x3a, 0xa0, 0xb0, 0xe9, 0xf9, 0x65) |
| 22 | |
| 23 | #define IMX8MP_RSB3720A1_6G_FIT_IMAGE_GUID \ |
| 24 | EFI_GUID(0xb5fb6f08, 0xe142, 0x4db1, 0x97, 0xea, \ |
| 25 | 0x5f, 0xd3, 0x6b, 0x9b, 0xe5, 0xb9) |
| 26 | |
Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 27 | #ifdef CONFIG_SPL_BUILD |
Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 28 | #define CONFIG_MALLOC_F_ADDR 0x184000 /* malloc f used before \ |
| 29 | * GD_FLG_FULL_MALLOC_INIT \ |
| 30 | * set \ |
| 31 | */ |
| 32 | |
Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 33 | |
| 34 | #if defined(CONFIG_NAND_BOOT) |
Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 35 | #define CONFIG_SPL_NAND_MXS |
Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 36 | #endif |
| 37 | |
| 38 | #endif |
| 39 | |
Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 40 | /* ENET Config */ |
| 41 | /* ENET1 */ |
| 42 | #if defined(CONFIG_CMD_NET) |
Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 43 | #define CONFIG_FEC_MXC_PHYADDR 4 |
Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 44 | |
| 45 | #define DWC_NET_PHYADDR 4 |
| 46 | #ifdef CONFIG_DWC_ETH_QOS |
| 47 | #define CONFIG_SYS_NONCACHED_MEMORY (1 * SZ_1M) /* 1M */ |
| 48 | #endif |
| 49 | |
| 50 | #define PHY_ANEG_TIMEOUT 20000 |
| 51 | |
| 52 | #endif |
| 53 | |
| 54 | #if CONFIG_IS_ENABLED(CMD_MMC) |
| 55 | # define BOOT_TARGET_MMC(func) \ |
| 56 | func(MMC, mmc, 2) \ |
| 57 | func(MMC, mmc, 1) |
| 58 | #else |
| 59 | # define BOOT_TARGET_MMC(func) |
| 60 | #endif |
| 61 | |
| 62 | #if CONFIG_IS_ENABLED(CMD_PXE) |
| 63 | # define BOOT_TARGET_PXE(func) func(PXE, pxe, na) |
| 64 | #else |
| 65 | # define BOOT_TARGET_PXE(func) |
| 66 | #endif |
| 67 | |
| 68 | #if CONFIG_IS_ENABLED(CMD_DHCP) |
| 69 | # define BOOT_TARGET_DHCP(func) func(DHCP, dhcp, na) |
| 70 | #else |
| 71 | # define BOOT_TARGET_DHCP(func) |
| 72 | #endif |
| 73 | |
| 74 | #define BOOT_TARGET_DEVICES(func) \ |
| 75 | BOOT_TARGET_MMC(func) \ |
| 76 | BOOT_TARGET_PXE(func) \ |
| 77 | BOOT_TARGET_DHCP(func) |
| 78 | |
| 79 | /* Initial environment variables */ |
| 80 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 81 | BOOTENV \ |
| 82 | "script=boot.scr\0" \ |
| 83 | "image=Image\0" \ |
| 84 | "splashimage=0x50000000\0" \ |
| 85 | "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200\0" \ |
| 86 | "fdt_addr=0x43000000\0" \ |
| 87 | "fdt_addr_r=0x43000000\0" \ |
| 88 | "boot_fit=no\0" \ |
| 89 | "dfu_alt_info=mmc 2=flash-bin raw 0 0x1B00 mmcpart 1\0" \ |
| 90 | "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ |
| 91 | "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ |
| 92 | "initrd_addr=0x43800000\0" \ |
| 93 | "bootm_size=0x10000000\0" \ |
| 94 | "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ |
| 95 | "mmcpart=1\0" \ |
Peng Fan | adfaa42 | 2022-04-15 12:23:41 +0800 | [diff] [blame] | 96 | "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \ |
Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 97 | "mmcautodetect=yes\0" \ |
| 98 | "mmcargs=setenv bootargs ${jh_clk} console=${console} root=${mmcroot}\0 " \ |
| 99 | "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ |
| 100 | "bootscript=echo Running bootscript from mmc ...; " \ |
| 101 | "source\0" \ |
| 102 | "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ |
| 103 | "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ |
| 104 | "kernel_addr_r=0x40480000\0" \ |
| 105 | "pxefile_addr_r=0x40480000\0" \ |
| 106 | "ramdisk_addr_r=0x43800000\0" \ |
| 107 | "mmcboot=echo Booting from mmc ...; " \ |
| 108 | "run mmcargs; " \ |
| 109 | "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \ |
| 110 | "bootm ${loadaddr}; " \ |
| 111 | "else " \ |
| 112 | "if run loadfdt; then " \ |
| 113 | "booti ${loadaddr} - ${fdt_addr}; " \ |
| 114 | "else " \ |
| 115 | "echo WARN: Cannot load the DT; " \ |
| 116 | "fi; " \ |
| 117 | "fi;\0" \ |
| 118 | "netargs=setenv bootargs ${jh_clk} console=${console} " \ |
| 119 | "root=/dev/nfs " \ |
| 120 | "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ |
| 121 | "netboot=echo Booting from net ...; " \ |
| 122 | "run netargs; " \ |
| 123 | "if test ${ip_dyn} = yes; then " \ |
| 124 | "setenv get_cmd dhcp; " \ |
| 125 | "else " \ |
| 126 | "setenv get_cmd tftp; " \ |
| 127 | "fi; " \ |
| 128 | "${get_cmd} ${loadaddr} ${image}; " \ |
| 129 | "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \ |
| 130 | "bootm ${loadaddr}; " \ |
| 131 | "else " \ |
| 132 | "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ |
| 133 | "booti ${loadaddr} - ${fdt_addr}; " \ |
| 134 | "else " \ |
| 135 | "echo WARN: Cannot load the DT; " \ |
| 136 | "fi; " \ |
| 137 | "fi;\0" |
| 138 | |
| 139 | /* Link Definitions */ |
| 140 | #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 |
| 141 | #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 |
Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 142 | |
Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 143 | |
| 144 | /* Totally 6GB or 4G DDR */ |
| 145 | #define CONFIG_SYS_SDRAM_BASE 0x40000000 |
| 146 | #define PHYS_SDRAM 0x40000000 |
| 147 | #if defined(CONFIG_TARGET_IMX8MP_RSB3720A1_6G) |
| 148 | #define PHYS_SDRAM_SIZE 0xC0000000 /* 3 GB */ |
| 149 | #define PHYS_SDRAM_2 0x100000000 |
| 150 | #define PHYS_SDRAM_2_SIZE 0xC0000000 /* 3 GB */ |
| 151 | #elif defined(CONFIG_TARGET_IMX8MP_RSB3720A1_4G) |
| 152 | #define PHYS_SDRAM_SIZE 0x80000000 /* 2 GB */ |
| 153 | #define PHYS_SDRAM_2 0xC0000000 |
| 154 | #define PHYS_SDRAM_2_SIZE 0x80000000 /* 2 GB */ |
| 155 | #endif |
| 156 | |
Tom Rini | d31466b | 2022-05-11 18:01:06 -0400 | [diff] [blame] | 157 | #define CONFIG_MXC_UART_BASE UART3_BASE_ADDR |
| 158 | |
Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 159 | #define CONFIG_SYS_FSL_USDHC_NUM 2 |
| 160 | #define CONFIG_SYS_FSL_ESDHC_ADDR 0 |
| 161 | |
| 162 | #ifdef CONFIG_FSL_FSPI |
| 163 | #define FSL_FSPI_FLASH_SIZE SZ_32M |
| 164 | #define FSL_FSPI_FLASH_NUM 1 |
| 165 | #define FSPI0_BASE_ADDR 0x30bb0000 |
| 166 | #define FSPI0_AMBA_BASE 0x0 |
| 167 | #define CONFIG_FSPI_QUAD_SUPPORT |
| 168 | |
| 169 | #define CONFIG_SYS_FSL_FSPI_AHB |
| 170 | #endif |
| 171 | |
| 172 | #ifdef CONFIG_NAND_MXS |
| 173 | |
| 174 | /* NAND stuff */ |
| 175 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| 176 | #define CONFIG_SYS_NAND_BASE 0x20000000 |
Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 177 | #endif /* CONFIG_NAND_MXS */ |
| 178 | |
Ying-Chun Liu (PaulLiu) | ddb56f3 | 2022-02-08 09:22:38 +0800 | [diff] [blame] | 179 | #endif /* __IMX8MP_RSB3720_H */ |