blob: 97570cb7f2fcdb37cac323d3da1529a246314d2c [file] [log] [blame]
Hans de Goede53ab4af2015-04-15 19:03:49 +02001/*
2 * Copyright 2013 Emilio López
3 *
4 * Emilio López <emilio@elopez.com.ar>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
15 *
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
Hans de Goede53ab4af2015-04-15 19:03:49 +020021 * Or, alternatively,
22 *
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
30 * conditions:
31 *
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
34 *
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45/dts-v1/;
46#include "sun4i-a10.dtsi"
47#include "sunxi-common-regulators.dtsi"
48
49#include <dt-bindings/gpio/gpio.h>
50#include <dt-bindings/pinctrl/sun4i-a10.h>
51
52/ {
53 model = "Mele A1000";
54 compatible = "mele,a1000", "allwinner,sun4i-a10";
55
56 aliases {
57 serial0 = &uart0;
58 };
59
60 chosen {
61 stdout-path = "serial0:115200n8";
62 };
63
64 leds {
65 compatible = "gpio-leds";
66 pinctrl-names = "default";
67 pinctrl-0 = <&led_pins_a1000>;
68
69 red {
70 label = "a1000:red:usr";
71 gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
72 };
73
74 blue {
75 label = "a1000:blue:usr";
76 gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
77 };
78 };
79
80 reg_emac_3v3: emac-3v3 {
81 compatible = "regulator-fixed";
82 pinctrl-names = "default";
83 pinctrl-0 = <&emac_power_pin_a1000>;
84 regulator-name = "emac-3v3";
85 regulator-min-microvolt = <3300000>;
86 regulator-max-microvolt = <3300000>;
87 enable-active-high;
88 gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
89 };
90};
91
92&ahci {
93 status = "okay";
94};
95
Hans de Goede80e5f832016-03-14 17:37:09 +010096&codec {
97 status = "okay";
98};
99
Hans de Goede53ab4af2015-04-15 19:03:49 +0200100&ehci0 {
101 status = "okay";
102};
103
104&ehci1 {
105 status = "okay";
106};
107
108&emac {
109 pinctrl-names = "default";
110 pinctrl-0 = <&emac_pins_a>;
111 phy = <&phy1>;
112 status = "okay";
113};
114
Hans de Goede8b1ba942015-06-02 15:53:40 +0200115&emac_sram {
116 status = "okay";
117};
118
Hans de Goede53ab4af2015-04-15 19:03:49 +0200119&i2c0 {
120 pinctrl-names = "default";
121 pinctrl-0 = <&i2c0_pins_a>;
122 status = "okay";
123
124 axp209: pmic@34 {
125 compatible = "x-powers,axp209";
126 reg = <0x34>;
127 interrupts = <0>;
128
129 interrupt-controller;
130 #interrupt-cells = <1>;
131 };
132};
133
134&ir0 {
135 pinctrl-names = "default";
Hans de Goede8b1ba942015-06-02 15:53:40 +0200136 pinctrl-0 = <&ir0_rx_pins_a>;
Hans de Goede53ab4af2015-04-15 19:03:49 +0200137 status = "okay";
138};
139
140&mdio {
141 phy-supply = <&reg_emac_3v3>;
142 status = "okay";
143
144 phy1: ethernet-phy@1 {
145 reg = <1>;
146 };
147};
148
149&mmc0 {
150 pinctrl-names = "default";
151 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
152 vmmc-supply = <&reg_vcc3v3>;
153 bus-width = <4>;
154 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
155 cd-inverted;
156 status = "okay";
157};
158
159&ohci0 {
160 status = "okay";
161};
162
163&ohci1 {
164 status = "okay";
165};
166
167&pio {
168 emac_power_pin_a1000: emac_power_pin@0 {
169 allwinner,pins = "PH15";
170 allwinner,function = "gpio_out";
171 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
172 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
173 };
174
175 led_pins_a1000: led_pins@0 {
176 allwinner,pins = "PH10", "PH20";
177 allwinner,function = "gpio_out";
178 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
179 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
180 };
181};
182
183&reg_usb1_vbus {
184 status = "okay";
185};
186
187&reg_usb2_vbus {
188 status = "okay";
189};
190
191&uart0 {
192 pinctrl-names = "default";
193 pinctrl-0 = <&uart0_pins_a>;
194 status = "okay";
195};
196
197&usbphy {
198 usb1_vbus-supply = <&reg_usb1_vbus>;
199 usb2_vbus-supply = <&reg_usb2_vbus>;
200 status = "okay";
201};