Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 2cc83cedc15b3ea2d6033997108934622d6be80b / . / arch / arm / dts / imx6ull.dtsi
blob: 4598f2f41196fd5c57a0bc67fdea5f61f871decb [file] [log] [blame]
Peng Fanb0a8e452016-08-11 14:02:55 +0800[diff] [blame]1/*
2 * Copyright 2015-2016 Freescale Semiconductor, Inc.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9#include <dt-bindings/clock/imx6ul-clock.h>
10#include <dt-bindings/gpio/gpio.h>
Stefan Agner89555192018-01-25 13:56:48 +0100[diff] [blame]11#include <dt-bindings/input/input.h>
Peng Fanb0a8e452016-08-11 14:02:55 +0800[diff] [blame]12#include <dt-bindings/interrupt-controller/arm-gic.h>
13#include "imx6ull-pinfunc.h"
14#include "imx6ull-pinfunc-snvs.h"
15#include "skeleton.dtsi"
16
17/ {
18 aliases {
19 can0 = &flexcan1;
20 can1 = &flexcan2;
21 ethernet0 = &fec1;
22 ethernet1 = &fec2;
23 gpio0 = &gpio1;
24 gpio1 = &gpio2;
25 gpio2 = &gpio3;
26 gpio3 = &gpio4;
27 gpio4 = &gpio5;
28 i2c0 = &i2c1;
29 i2c1 = &i2c2;
30 i2c2 = &i2c3;
31 i2c3 = &i2c4;
32 mmc0 = &usdhc1;
33 mmc1 = &usdhc2;
34 serial0 = &uart1;
35 serial1 = &uart2;
36 serial2 = &uart3;
37 serial3 = &uart4;
38 serial4 = &uart5;
39 serial5 = &uart6;
40 serial6 = &uart7;
41 serial7 = &uart8;
Peng Fana3cc4352018-01-03 08:52:03 +0800[diff] [blame]42 spi0 = &qspi;
43 spi1 = &ecspi1;
44 spi2 = &ecspi2;
45 spi3 = &ecspi3;
46 spi4 = &ecspi4;
Peng Fanb0a8e452016-08-11 14:02:55 +0800[diff] [blame]47 usbphy0 = &usbphy1;
48 usbphy1 = &usbphy2;
Filip Brozovic8e105712019-04-12 11:59:55 +0200[diff] [blame]49 usb0 = &usbotg1;
50 usb1 = &usbotg2;
Peng Fanb0a8e452016-08-11 14:02:55 +0800[diff] [blame]51 };
52
53 cpus {
54 #address-cells = <1>;
55 #size-cells = <0>;
56
57 cpu0: cpu@0 {
58 compatible = "arm,cortex-a7";
59 device_type = "cpu";
60 reg = <0>;
61 clock-latency = <61036>; /* two CLK32 periods */
62 operating-points = <
63 /* kHz uV */
64 528000 1175000
65 99000 950000
66 >;
67 fsl,soc-operating-points = <
68 /* KHz uV */
69 528000 1175000
70 99000 1175000
71 >;
72 clocks = <&clks IMX6UL_CLK_ARM>,
73 <&clks IMX6UL_CLK_PLL2_BUS>,
74 <&clks IMX6UL_CLK_PLL2_PFD2>,
75 <&clks IMX6UL_CA7_SECONDARY_SEL>,
76 <&clks IMX6UL_CLK_STEP>,
77 <&clks IMX6UL_CLK_PLL1_SW>,
78 <&clks IMX6UL_CLK_PLL1_SYS>,
79 <&clks IMX6UL_PLL1_BYPASS>,
80 <&clks IMX6UL_CLK_PLL1>,
81 <&clks IMX6UL_PLL1_BYPASS_SRC>,
82 <&clks IMX6UL_CLK_OSC>;
83 clock-names = "arm", "pll2_bus", "pll2_pfd2_396m", "secondary_sel", "step",
84 "pll1_sw", "pll1_sys", "pll1_bypass", "pll1", "pll1_bypass_src", "osc";
85 };
86 };
87
88 intc: interrupt-controller@00a01000 {
89 compatible = "arm,cortex-a7-gic";
90 #interrupt-cells = <3>;
91 interrupt-controller;
92 reg = <0x00a01000 0x1000>,
93 <0x00a02000 0x100>;
94 };
95
96 clocks {
97 #address-cells = <1>;
98 #size-cells = <0>;
99
100 ckil: clock@0 {
101 compatible = "fixed-clock";
102 reg = <0>;
103 #clock-cells = <0>;
104 clock-frequency = <32768>;
105 clock-output-names = "ckil";
106 };
107
108 osc: clock@1 {
109 compatible = "fixed-clock";
110 reg = <1>;
111 #clock-cells = <0>;
112 clock-frequency = <24000000>;
113 clock-output-names = "osc";
114 };
115
116 ipp_di0: clock@2 {
117 compatible = "fixed-clock";
118 reg = <2>;
119 #clock-cells = <0>;
120 clock-frequency = <0>;
121 clock-output-names = "ipp_di0";
122 };
123
124 ipp_di1: clock@3 {
125 compatible = "fixed-clock";
126 reg = <3>;
127 #clock-cells = <0>;
128 clock-frequency = <0>;
129 clock-output-names = "ipp_di1";
130 };
131 };
132
133 soc {
134 #address-cells = <1>;
135 #size-cells = <1>;
136 compatible = "simple-bus";
137 interrupt-parent = <&gpc>;
138 ranges;
139
140 busfreq {
141 compatible = "fsl,imx_busfreq";
142 clocks = <&clks IMX6UL_CLK_PLL2_PFD2>, <&clks IMX6UL_CLK_PLL2_198M>,
143 <&clks IMX6UL_CLK_PLL2_BUS>, <&clks IMX6UL_CLK_ARM>,
144 <&clks IMX6UL_CLK_PLL3_USB_OTG>, <&clks IMX6UL_CLK_PERIPH>,
145 <&clks IMX6UL_CLK_PERIPH_PRE>, <&clks IMX6UL_CLK_PERIPH_CLK2>,
146 <&clks IMX6UL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6UL_CLK_OSC>,
147 <&clks IMX6UL_CLK_AHB>, <&clks IMX6UL_CLK_AXI>,
148 <&clks IMX6UL_CLK_PERIPH2>, <&clks IMX6UL_CLK_PERIPH2_PRE>,
149 <&clks IMX6UL_CLK_PERIPH2_CLK2>, <&clks IMX6UL_CLK_PERIPH2_CLK2_SEL>,
150 <&clks IMX6UL_CLK_STEP>, <&clks IMX6UL_CLK_MMDC_P0_FAST>, <&clks IMX6UL_PLL1_BYPASS_SRC>,
151 <&clks IMX6UL_PLL1_BYPASS>, <&clks IMX6UL_CLK_PLL1_SYS>, <&clks IMX6UL_CLK_PLL1_SW>,
152 <&clks IMX6UL_CLK_PLL1>;
153 clock-names = "pll2_pfd2_396m", "pll2_198m", "pll2_bus", "arm", "pll3_usb_otg",
154 "periph", "periph_pre", "periph_clk2", "periph_clk2_sel", "osc",
155 "ahb", "ocram", "periph2", "periph2_pre", "periph2_clk2", "periph2_clk2_sel",
156 "step", "mmdc", "pll1_bypass_src", "pll1_bypass", "pll1_sys", "pll1_sw", "pll1";
157 fsl,max_ddr_freq = <400000000>;
158 };
159
160 pmu {
161 compatible = "arm,cortex-a7-pmu";
162 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
163 status = "disabled";
164 };
165
166 ocrams: sram@00900000 {
167 compatible = "fsl,lpm-sram";
168 reg = <0x00900000 0x4000>;
169 };
170
171 ocrams_ddr: sram@00904000 {
172 compatible = "fsl,ddr-lpm-sram";
173 reg = <0x00904000 0x1000>;
174 };
175
176 ocram: sram@00905000 {
177 compatible = "mmio-sram";
178 reg = <0x00905000 0x1B000>;
179 };
180
181 dma_apbh: dma-apbh@01804000 {
182 compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh";
183 reg = <0x01804000 0x2000>;
184 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
185 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
186 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
187 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
188 interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
189 #dma-cells = <1>;
190 dma-channels = <4>;
191 clocks = <&clks IMX6UL_CLK_APBHDMA>;
192 };
193
194 gpmi: gpmi-nand@01806000{
Stefan Agner55f34f32018-05-30 19:01:46 +0200[diff] [blame]195 compatible = "fsl,imx6q-gpmi-nand";
Peng Fanb0a8e452016-08-11 14:02:55 +0800[diff] [blame]196 #address-cells = <1>;
197 #size-cells = <1>;
198 reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
199 reg-names = "gpmi-nand", "bch";
200 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
201 interrupt-names = "bch";
202 clocks = <&clks IMX6UL_CLK_GPMI_IO>,
203 <&clks IMX6UL_CLK_GPMI_APB>,
204 <&clks IMX6UL_CLK_GPMI_BCH>,
205 <&clks IMX6UL_CLK_GPMI_BCH_APB>,
206 <&clks IMX6UL_CLK_PER_BCH>;
207 clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
208 "gpmi_bch_apb", "per1_bch";
209 dmas = <&dma_apbh 0>;
210 dma-names = "rx-tx";
211 status = "disabled";
212 };
213
214 aips1: aips-bus@02000000 {
215 compatible = "fsl,aips-bus", "simple-bus";
216 #address-cells = <1>;
217 #size-cells = <1>;
218 reg = <0x02000000 0x100000>;
219 ranges;
220
221 spba-bus@02000000 {
222 compatible = "fsl,spba-bus", "simple-bus";
223 #address-cells = <1>;
224 #size-cells = <1>;
225 reg = <0x02000000 0x40000>;
226 ranges;
227
228 spdif: spdif@02004000 {
229 compatible = "fsl,imx6ul-spdif", "fsl,imx35-spdif";
230 reg = <0x02004000 0x4000>;
231 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
232 dmas = <&sdma 41 18 0>,
233 <&sdma 42 18 0>;
234 dma-names = "rx", "tx";
235 clocks = <&clks IMX6UL_CLK_SPDIF_GCLK>,
236 <&clks IMX6UL_CLK_OSC>,
237 <&clks IMX6UL_CLK_SPDIF>,
238 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>,
239 <&clks IMX6UL_CLK_IPG>,
240 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>,
241 <&clks IMX6UL_CLK_SPBA>;
242 clock-names = "core", "rxtx0",
243 "rxtx1", "rxtx2",
244 "rxtx3", "rxtx4",
245 "rxtx5", "rxtx6",
246 "rxtx7", "dma";
247 status = "disabled";
248 };
249
250 ecspi1: ecspi@02008000 {
251 #address-cells = <1>;
252 #size-cells = <0>;
253 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
254 reg = <0x02008000 0x4000>;
255 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
256 clocks = <&clks IMX6UL_CLK_ECSPI1>,
257 <&clks IMX6UL_CLK_ECSPI1>;
258 clock-names = "ipg", "per";
259 dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
260 dma-names = "rx", "tx";
261 status = "disabled";
262 };
263
264 ecspi2: ecspi@0200c000 {
265 #address-cells = <1>;
266 #size-cells = <0>;
267 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
268 reg = <0x0200c000 0x4000>;
269 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
270 clocks = <&clks IMX6UL_CLK_ECSPI2>,
271 <&clks IMX6UL_CLK_ECSPI2>;
272 clock-names = "ipg", "per";
273 dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
274 dma-names = "rx", "tx";
275 status = "disabled";
276 };
277
278 ecspi3: ecspi@02010000 {
279 #address-cells = <1>;
280 #size-cells = <0>;
281 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
282 reg = <0x02010000 0x4000>;
283 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
284 clocks = <&clks IMX6UL_CLK_ECSPI3>,
285 <&clks IMX6UL_CLK_ECSPI3>;
286 clock-names = "ipg", "per";
287 dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
288 dma-names = "rx", "tx";
289 status = "disabled";
290 };
291
292 ecspi4: ecspi@02014000 {
293 #address-cells = <1>;
294 #size-cells = <0>;
295 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
296 reg = <0x02014000 0x4000>;
297 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
298 clocks = <&clks IMX6UL_CLK_ECSPI4>,
299 <&clks IMX6UL_CLK_ECSPI4>;
300 clock-names = "ipg", "per";
301 dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
302 dma-names = "rx", "tx";
303 status = "disabled";
304 };
305
306 uart7: serial@02018000 {
307 compatible = "fsl,imx6ul-uart",
308 "fsl,imx6q-uart", "fsl,imx21-uart";
309 reg = <0x02018000 0x4000>;
310 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
311 clocks = <&clks IMX6UL_CLK_UART7_IPG>,
312 <&clks IMX6UL_CLK_UART7_SERIAL>;
313 clock-names = "ipg", "per";
314 dmas = <&sdma 43 4 0>, <&sdma 44 4 0>;
315 dma-names = "rx", "tx";
316 status = "disabled";
317 };
318
319 uart1: serial@02020000 {
320 compatible = "fsl,imx6ul-uart",
321 "fsl,imx6q-uart", "fsl,imx21-uart";
322 reg = <0x02020000 0x4000>;
323 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
324 clocks = <&clks IMX6UL_CLK_UART1_IPG>,
325 <&clks IMX6UL_CLK_UART1_SERIAL>;
326 clock-names = "ipg", "per";
327 status = "disabled";
328 };
329
330 esai: esai@02024000 {
331 compatible = "fsl,imx6ull-esai";
332 reg = <0x02024000 0x4000>;
333 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
334 clocks = <&clks IMX6UL_CLK_ESAI_IPG>,
335 <&clks IMX6UL_CLK_ESAI_MEM>,
336 <&clks IMX6UL_CLK_ESAI_EXTAL>,
337 <&clks IMX6UL_CLK_ESAI_IPG>,
338 <&clks IMX6UL_CLK_SPBA>;
339 clock-names = "core", "mem", "extal",
340 "fsys", "dma";
341 dmas = <&sdma 0 21 0>, <&sdma 47 21 0>;
342 dma-names = "rx", "tx";
343 dma-source = <&gpr 0 14 0 15>;
344 status = "disabled";
345 };
346
347 sai1: sai@02028000 {
348 compatible = "fsl,imx6ul-sai",
349 "fsl,imx6sx-sai";
350 reg = <0x02028000 0x4000>;
351 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
352 clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
353 <&clks IMX6UL_CLK_DUMMY>,
354 <&clks IMX6UL_CLK_SAI1>,
355 <&clks 0>, <&clks 0>;
356 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
357 dma-names = "rx", "tx";
358 dmas = <&sdma 35 24 0>, <&sdma 36 24 0>;
359 status = "disabled";
360 };
361
362 sai2: sai@0202c000 {
363 compatible = "fsl,imx6ul-sai",
364 "fsl,imx6sx-sai";
365 reg = <0x0202c000 0x4000>;
366 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
367 clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
368 <&clks IMX6UL_CLK_DUMMY>,
369 <&clks IMX6UL_CLK_SAI2>,
370 <&clks 0>, <&clks 0>;
371 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
372 dma-names = "rx", "tx";
373 dmas = <&sdma 37 24 0>, <&sdma 38 24 0>;
374 status = "disabled";
375 };
376
377 sai3: sai@02030000 {
378 compatible = "fsl,imx6ul-sai",
379 "fsl,imx6sx-sai";
380 reg = <0x02030000 0x4000>;
381 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
382 clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
383 <&clks IMX6UL_CLK_DUMMY>,
384 <&clks IMX6UL_CLK_SAI3>,
385 <&clks 0>, <&clks 0>;
386 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
387 dma-names = "rx", "tx";
388 dmas = <&sdma 39 24 0>, <&sdma 40 24 0>;
389 status = "disabled";
390 };
391
392 asrc: asrc@02034000 {
393 compatible = "fsl,imx53-asrc";
394 reg = <0x02034000 0x4000>;
395 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
396 clocks = <&clks IMX6UL_CLK_ASRC_IPG>,
397 <&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>,
398 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
399 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
400 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
401 <&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>,
402 <&clks IMX6UL_CLK_SPBA>;
403 clock-names = "mem", "ipg", "asrck_0",
404 "asrck_1", "asrck_2", "asrck_3", "asrck_4",
405 "asrck_5", "asrck_6", "asrck_7", "asrck_8",
406 "asrck_9", "asrck_a", "asrck_b", "asrck_c",
407 "asrck_d", "asrck_e", "asrck_f", "dma";
408 dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
409 <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
410 dma-names = "rxa", "rxb", "rxc",
411 "txa", "txb", "txc";
412 fsl,asrc-rate = <48000>;
413 fsl,asrc-width = <16>;
414 status = "okay";
415 };
416 };
417
418 tsc: tsc@02040000 {
419 compatible = "fsl,imx6ul-tsc";
420 reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
421 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
422 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
423 clocks = <&clks IMX6UL_CLK_IPG>,
424 <&clks IMX6UL_CLK_ADC2>;
425 clock-names = "tsc", "adc";
426 status = "disabled";
427 };
428
429 pwm1: pwm@02080000 {
430 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
431 reg = <0x02080000 0x4000>;
432 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
433 clocks = <&clks IMX6UL_CLK_PWM1>,
434 <&clks IMX6UL_CLK_PWM1>;
435 clock-names = "ipg", "per";
436 #pwm-cells = <2>;
437 };
438
439 pwm2: pwm@02084000 {
440 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
441 reg = <0x02084000 0x4000>;
442 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
443 clocks = <&clks IMX6UL_CLK_DUMMY>,
444 <&clks IMX6UL_CLK_DUMMY>;
445 clock-names = "ipg", "per";
446 #pwm-cells = <2>;
447 };
448
449 pwm3: pwm@02088000 {
450 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
451 reg = <0x02088000 0x4000>;
452 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
453 clocks = <&clks IMX6UL_CLK_PWM3>,
454 <&clks IMX6UL_CLK_PWM3>;
455 clock-names = "ipg", "per";
456 #pwm-cells = <2>;
457 };
458
459 pwm4: pwm@0208c000 {
460 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
461 reg = <0x0208c000 0x4000>;
462 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
463 clocks = <&clks IMX6UL_CLK_DUMMY>,
464 <&clks IMX6UL_CLK_DUMMY>;
465 clock-names = "ipg", "per";
466 #pwm-cells = <2>;
467 };
468
469 flexcan1: can@02090000 {
470 compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
471 reg = <0x02090000 0x4000>;
472 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
473 clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
474 <&clks IMX6UL_CLK_CAN1_SERIAL>;
475 clock-names = "ipg", "per";
476 stop-mode = <&gpr 0x10 1 0x10 17>;
477 status = "disabled";
478 };
479
480 flexcan2: can@02094000 {
481 compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
482 reg = <0x02094000 0x4000>;
483 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
484 clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
485 <&clks IMX6UL_CLK_CAN2_SERIAL>;
486 clock-names = "ipg", "per";
487 stop-mode = <&gpr 0x10 2 0x10 18>;
488 status = "disabled";
489 };
490
491 gpt1: gpt@02098000 {
492 compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt";
493 reg = <0x02098000 0x4000>;
494 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
495 clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
496 <&clks IMX6UL_CLK_GPT1_SERIAL>;
497 clock-names = "ipg", "per";
498 };
499
500 gpio1: gpio@0209c000 {
501 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
502 reg = <0x0209c000 0x4000>;
503 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
504 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
505 gpio-controller;
506 #gpio-cells = <2>;
507 interrupt-controller;
508 #interrupt-cells = <2>;
509 };
510
511 gpio2: gpio@020a0000 {
512 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
513 reg = <0x020a0000 0x4000>;
514 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
515 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
516 gpio-controller;
517 #gpio-cells = <2>;
518 interrupt-controller;
519 #interrupt-cells = <2>;
520 };
521
522 gpio3: gpio@020a4000 {
523 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
524 reg = <0x020a4000 0x4000>;
525 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
526 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
527 gpio-controller;
528 #gpio-cells = <2>;
529 interrupt-controller;
530 #interrupt-cells = <2>;
531 };
532
533 gpio4: gpio@020a8000 {
534 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
535 reg = <0x020a8000 0x4000>;
536 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
537 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
538 gpio-controller;
539 #gpio-cells = <2>;
540 interrupt-controller;
541 #interrupt-cells = <2>;
542 };
543
544 gpio5: gpio@020ac000 {
545 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
546 reg = <0x020ac000 0x4000>;
547 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
548 <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
549 gpio-controller;
550 #gpio-cells = <2>;
551 interrupt-controller;
552 #interrupt-cells = <2>;
553 };
554
555 snvslp: snvs@020b0000 {
556 compatible = "fsl,imx6ul-snvs";
557 reg = <0x020b0000 0x4000>;
558 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
559 };
560
561 fec2: ethernet@020b4000 {
562 compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
563 reg = <0x020b4000 0x4000>;
564 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
565 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
566 clocks = <&clks IMX6UL_CLK_ENET>,
567 <&clks IMX6UL_CLK_ENET_AHB>,
568 <&clks IMX6UL_CLK_ENET_PTP>,
569 <&clks IMX6UL_CLK_ENET2_REF_125M>,
570 <&clks IMX6UL_CLK_ENET2_REF_125M>;
571 clock-names = "ipg", "ahb", "ptp",
572 "enet_clk_ref", "enet_out";
573 stop-mode = <&gpr 0x10 4>;
574 fsl,num-tx-queues=<1>;
575 fsl,num-rx-queues=<1>;
576 fsl,magic-packet;
577 fsl,wakeup_irq = <0>;
578 status = "disabled";
579 };
580
581 kpp: kpp@020b8000 {
582 compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
583 reg = <0x020b8000 0x4000>;
584 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
585 clocks = <&clks IMX6UL_CLK_DUMMY>;
586 status = "disabled";
587 };
588
589 wdog1: wdog@020bc000 {
590 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
591 reg = <0x020bc000 0x4000>;
592 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
593 clocks = <&clks IMX6UL_CLK_WDOG1>;
594 };
595
596 wdog2: wdog@020c0000 {
597 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
598 reg = <0x020c0000 0x4000>;
599 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
600 clocks = <&clks IMX6UL_CLK_WDOG2>;
601 status = "disabled";
602 };
603
604 clks: ccm@020c4000 {
605 compatible = "fsl,imx6ul-ccm";
606 reg = <0x020c4000 0x4000>;
607 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
608 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
609 #clock-cells = <1>;
610 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
611 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
612 };
613
614 anatop: anatop@020c8000 {
615 compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
616 "syscon", "simple-bus";
617 reg = <0x020c8000 0x1000>;
618 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
619 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
620 <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
621
622 reg_3p0: regulator-3p0@120 {
623 compatible = "fsl,anatop-regulator";
624 regulator-name = "vdd3p0";
625 regulator-min-microvolt = <2625000>;
626 regulator-max-microvolt = <3400000>;
627 anatop-reg-offset = <0x120>;
628 anatop-vol-bit-shift = <8>;
629 anatop-vol-bit-width = <5>;
630 anatop-min-bit-val = <0>;
631 anatop-min-voltage = <2625000>;
632 anatop-max-voltage = <3400000>;
633 anatop-enable-bit = <0>;
634 };
635
636 reg_arm: regulator-vddcore@140 {
637 compatible = "fsl,anatop-regulator";
638 regulator-name = "cpu";
639 regulator-min-microvolt = <725000>;
640 regulator-max-microvolt = <1450000>;
641 regulator-always-on;
642 anatop-reg-offset = <0x140>;
643 anatop-vol-bit-shift = <0>;
644 anatop-vol-bit-width = <5>;
645 anatop-delay-reg-offset = <0x170>;
646 anatop-delay-bit-shift = <24>;
647 anatop-delay-bit-width = <2>;
648 anatop-min-bit-val = <1>;
649 anatop-min-voltage = <725000>;
650 anatop-max-voltage = <1450000>;
651 };
652
653 reg_soc: regulator-vddsoc@140 {
654 compatible = "fsl,anatop-regulator";
655 regulator-name = "vddsoc";
656 regulator-min-microvolt = <725000>;
657 regulator-max-microvolt = <1450000>;
658 regulator-always-on;
659 anatop-reg-offset = <0x140>;
660 anatop-vol-bit-shift = <18>;
661 anatop-vol-bit-width = <5>;
662 anatop-delay-reg-offset = <0x170>;
663 anatop-delay-bit-shift = <28>;
664 anatop-delay-bit-width = <2>;
665 anatop-min-bit-val = <1>;
666 anatop-min-voltage = <725000>;
667 anatop-max-voltage = <1450000>;
668 };
669 };
670
671 usbphy1: usbphy@020c9000 {
672 compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
673 reg = <0x020c9000 0x1000>;
674 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
675 clocks = <&clks IMX6UL_CLK_USBPHY1>;
676 phy-3p0-supply = <&reg_3p0>;
677 fsl,anatop = <&anatop>;
678 };
679
680 usbphy2: usbphy@020ca000 {
681 compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
682 reg = <0x020ca000 0x1000>;
683 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
684 clocks = <&clks IMX6UL_CLK_USBPHY2>;
685 phy-3p0-supply = <&reg_3p0>;
686 fsl,anatop = <&anatop>;
687 };
688
689 tempmon: tempmon {
690 compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
691 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
692 fsl,tempmon = <&anatop>;
693 fsl,tempmon-data = <&ocotp>;
694 clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
695 };
696
697 snvs: snvs@020cc000 {
698 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
699 reg = <0x020cc000 0x4000>;
700
701 snvs_rtc: snvs-rtc-lp {
702 compatible = "fsl,sec-v4.0-mon-rtc-lp";
703 regmap = <&snvs>;
704 offset = <0x34>;
705 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
706 };
707
708 snvs_poweroff: snvs-poweroff {
709 compatible = "syscon-poweroff";
710 regmap = <&snvs>;
711 offset = <0x38>;
712 mask = <0x61>;
713 };
714
715 snvs_pwrkey: snvs-powerkey {
716 compatible = "fsl,sec-v4.0-pwrkey";
717 regmap = <&snvs>;
718 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
719 linux,keycode = <KEY_POWER>;
720 wakeup;
721 };
722 };
723
724 epit1: epit@020d0000 {
725 reg = <0x020d0000 0x4000>;
726 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
727 };
728
729 epit2: epit@020d4000 {
730 reg = <0x020d4000 0x4000>;
731 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
732 };
733
734 src: src@020d8000 {
735 compatible = "fsl,imx6ul-src", "fsl,imx51-src";
736 reg = <0x020d8000 0x4000>;
737 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
738 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
739 #reset-cells = <1>;
740 };
741
742 gpc: gpc@020dc000 {
743 compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
744 reg = <0x020dc000 0x4000>;
745 interrupt-controller;
746 #interrupt-cells = <3>;
747 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
748 interrupt-parent = <&intc>;
749 fsl,mf-mix-wakeup-irq = <0xfc00000 0x7d00 0x0 0x1400640>;
750 };
751
752 iomuxc: iomuxc@020e0000 {
753 compatible = "fsl,imx6ul-iomuxc";
754 reg = <0x020e0000 0x4000>;
755 };
756
757 gpr: iomuxc-gpr@020e4000 {
758 compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
759 reg = <0x020e4000 0x4000>;
760 };
761
762 mqs: mqs {
763 compatible = "fsl,imx6sx-mqs";
764 gpr = <&gpr>;
765 status = "disabled";
766 };
767
768 gpt2: gpt@020e8000 {
769 compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt";
770 reg = <0x020e8000 0x4000>;
771 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
772 clocks = <&clks IMX6UL_CLK_DUMMY>,
773 <&clks IMX6UL_CLK_DUMMY>;
774 clock-names = "ipg", "per";
775 };
776
777 sdma: sdma@020ec000 {
778 compatible = "fsl,imx6ul-sdma", "fsl,imx35-sdma";
779 reg = <0x020ec000 0x4000>;
780 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
781 clocks = <&clks IMX6UL_CLK_SDMA>,
782 <&clks IMX6UL_CLK_SDMA>;
783 clock-names = "ipg", "ahb";
784 #dma-cells = <3>;
785 iram = <&ocram>;
786 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
787 };
788
789 pwm5: pwm@020f0000 {
790 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
791 reg = <0x020f0000 0x4000>;
792 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
793 clocks = <&clks IMX6UL_CLK_DUMMY>,
794 <&clks IMX6UL_CLK_DUMMY>;
795 clock-names = "ipg", "per";
796 #pwm-cells = <2>;
797 };
798
799 pwm6: pwm@020f4000 {
800 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
801 reg = <0x020f4000 0x4000>;
802 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
803 clocks = <&clks IMX6UL_CLK_DUMMY>,
804 <&clks IMX6UL_CLK_DUMMY>;
805 clock-names = "ipg", "per";
806 #pwm-cells = <2>;
807 };
808
809 pwm7: pwm@020f8000 {
810 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
811 reg = <0x020f8000 0x4000>;
812 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
813 clocks = <&clks IMX6UL_CLK_DUMMY>,
814 <&clks IMX6UL_CLK_DUMMY>;
815 clock-names = "ipg", "per";
816 #pwm-cells = <2>;
817 };
818
819 pwm8: pwm@020fc000 {
820 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
821 reg = <0x020fc000 0x4000>;
822 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
823 clocks = <&clks IMX6UL_CLK_DUMMY>,
824 <&clks IMX6UL_CLK_DUMMY>;
825 clock-names = "ipg", "per";
826 #pwm-cells = <2>;
827 };
828 };
829
830 aips2: aips-bus@02100000 {
831 compatible = "fsl,aips-bus", "simple-bus";
832 #address-cells = <1>;
833 #size-cells = <1>;
834 reg = <0x02100000 0x100000>;
835 ranges;
836
837 usbotg1: usb@02184000 {
838 compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
839 reg = <0x02184000 0x200>;
840 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
841 clocks = <&clks IMX6UL_CLK_USBOH3>;
842 fsl,usbphy = <&usbphy1>;
843 fsl,usbmisc = <&usbmisc 0>;
844 fsl,anatop = <&anatop>;
845 ahb-burst-config = <0x0>;
846 tx-burst-size-dword = <0x10>;
847 rx-burst-size-dword = <0x10>;
848 status = "disabled";
849 };
850
851 usbotg2: usb@02184200 {
852 compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
853 reg = <0x02184200 0x200>;
854 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
855 clocks = <&clks IMX6UL_CLK_USBOH3>;
856 fsl,usbphy = <&usbphy2>;
857 fsl,usbmisc = <&usbmisc 1>;
858 ahb-burst-config = <0x0>;
859 tx-burst-size-dword = <0x10>;
860 rx-burst-size-dword = <0x10>;
861 status = "disabled";
862 };
863
864 usbmisc: usbmisc@02184800 {
865 #index-cells = <1>;
866 compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
867 reg = <0x02184800 0x200>;
868 };
869
870 fec1: ethernet@02188000 {
871 compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
872 reg = <0x02188000 0x4000>;
873 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
874 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
875 clocks = <&clks IMX6UL_CLK_ENET>,
876 <&clks IMX6UL_CLK_ENET_AHB>,
877 <&clks IMX6UL_CLK_ENET_PTP>,
878 <&clks IMX6UL_CLK_ENET_REF>,
879 <&clks IMX6UL_CLK_ENET_REF>;
880 clock-names = "ipg", "ahb", "ptp",
881 "enet_clk_ref", "enet_out";
882 stop-mode = <&gpr 0x10 3>;
883 fsl,num-tx-queues=<1>;
884 fsl,num-rx-queues=<1>;
885 fsl,magic-packet;
886 fsl,wakeup_irq = <0>;
887 status = "disabled";
888 };
889
890 usdhc1: usdhc@02190000 {
891 compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
892 reg = <0x02190000 0x4000>;
893 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
894 clocks = <&clks IMX6UL_CLK_USDHC1>,
895 <&clks IMX6UL_CLK_USDHC1>,
896 <&clks IMX6UL_CLK_USDHC1>;
897 clock-names = "ipg", "ahb", "per";
898 bus-width = <4>;
899 fsl,tuning-step= <2>;
900 status = "disabled";
901 };
902
903 usdhc2: usdhc@02194000 {
904 compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
905 reg = <0x02194000 0x4000>;
906 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
907 clocks = <&clks IMX6UL_CLK_USDHC2>,
908 <&clks IMX6UL_CLK_USDHC2>,
909 <&clks IMX6UL_CLK_USDHC2>;
910 clock-names = "ipg", "ahb", "per";
911 bus-width = <4>;
912 fsl,tuning-step= <2>;
913 status = "disabled";
914 };
915
916 adc1: adc@02198000 {
917 compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
918 reg = <0x02198000 0x4000>;
919 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
920 clocks = <&clks IMX6UL_CLK_ADC1>;
921 num-channels = <2>;
922 clock-names = "adc";
923 status = "disabled";
924 };
925
926 i2c1: i2c@021a0000 {
927 #address-cells = <1>;
928 #size-cells = <0>;
929 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
930 reg = <0x021a0000 0x4000>;
931 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
932 clocks = <&clks IMX6UL_CLK_I2C1>;
933 status = "disabled";
934 };
935
936 i2c2: i2c@021a4000 {
937 #address-cells = <1>;
938 #size-cells = <0>;
939 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
940 reg = <0x021a4000 0x4000>;
941 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
942 clocks = <&clks IMX6UL_CLK_I2C2>;
943 status = "disabled";
944 };
945
946 i2c3: i2c@021a8000 {
947 #address-cells = <1>;
948 #size-cells = <0>;
949 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
950 reg = <0x021a8000 0x4000>;
951 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
952 clocks = <&clks IMX6UL_CLK_I2C3>;
953 status = "disabled";
954 };
955
956 romcp@021ac000 {
957 compatible = "fsl,imx6ul-romcp", "syscon";
958 reg = <0x021ac000 0x4000>;
959 };
960
961 mmdc: mmdc@021b0000 {
962 compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
963 reg = <0x021b0000 0x4000>;
964 };
965
966 weim: weim@021b8000 {
967 compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
968 reg = <0x021b8000 0x4000>;
969 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
970 clocks = <&clks IMX6UL_CLK_DUMMY>;
971 };
972
973 ocotp: ocotp-ctrl@021bc000 {
974 compatible = "fsl,imx6ull-ocotp", "syscon";
975 reg = <0x021bc000 0x4000>;
976 clocks = <&clks IMX6UL_CLK_OCOTP>;
977 };
978
979 csu: csu@021c0000 {
980 compatible = "fsl,imx6ul-csu";
981 reg = <0x021c0000 0x4000>;
982 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
983 status = "disabled";
984 };
985
986 csi: csi@021c4000 {
987 compatible = "fsl,imx6ul-csi", "fsl,imx6s-csi";
988 reg = <0x021c4000 0x4000>;
989 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
990 clocks = <&clks IMX6UL_CLK_DUMMY>,
991 <&clks IMX6UL_CLK_CSI>,
992 <&clks IMX6UL_CLK_DUMMY>;
993 clock-names = "disp-axi", "csi_mclk", "disp_dcic";
994 status = "disabled";
995 };
996
997 lcdif: lcdif@021c8000 {
998 compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
999 reg = <0x021c8000 0x4000>;
1000 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
1001 clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
1002 <&clks IMX6UL_CLK_LCDIF_APB>,
1003 <&clks IMX6UL_CLK_DUMMY>;
1004 clock-names = "pix", "axi", "disp_axi";
1005 status = "disabled";
1006 };
1007
1008 pxp: pxp@021cc000 {
1009 compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma";
1010 reg = <0x021cc000 0x4000>;
1011 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
1012 <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
1013 clocks = <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_PXP>;
1014 clock-names = "pxp_ipg", "pxp_axi";
1015 status = "disabled";
1016 };
1017
1018 qspi: qspi@021e0000 {
1019 #address-cells = <1>;
1020 #size-cells = <0>;
1021 compatible = "fsl,imx6ull-qspi", "fsl,imx6ul-qspi";
1022 reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
1023 reg-names = "QuadSPI", "QuadSPI-memory";
1024 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1025 clocks = <&clks IMX6UL_CLK_QSPI>,
1026 <&clks IMX6UL_CLK_QSPI>;
1027 clock-names = "qspi_en", "qspi";
1028 status = "disabled";
1029 };
1030
Jörg Krause7906ed42018-02-25 18:12:48 +0100[diff] [blame]1031 wdog3: wdog@021e4000 {
1032 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
1033 reg = <0x021e4000 0x4000>;
1034 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1035 clocks = <&clks IMX6UL_CLK_WDOG3>;
1036 status = "disabled";
1037 };
1038
Peng Fanb0a8e452016-08-11 14:02:55 +0800[diff] [blame]1039 uart2: serial@021e8000 {
1040 compatible = "fsl,imx6ul-uart",
1041 "fsl,imx6q-uart", "fsl,imx21-uart";
1042 reg = <0x021e8000 0x4000>;
1043 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
1044 clocks = <&clks IMX6UL_CLK_UART2_IPG>,
1045 <&clks IMX6UL_CLK_UART2_SERIAL>;
1046 clock-names = "ipg", "per";
1047 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
1048 dma-names = "rx", "tx";
1049 status = "disabled";
1050 };
1051
1052 uart3: serial@021ec000 {
1053 compatible = "fsl,imx6ul-uart",
1054 "fsl,imx6q-uart", "fsl,imx21-uart";
1055 reg = <0x021ec000 0x4000>;
1056 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
1057 clocks = <&clks IMX6UL_CLK_UART3_IPG>,
1058 <&clks IMX6UL_CLK_UART3_SERIAL>;
1059 clock-names = "ipg", "per";
1060 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
1061 dma-names = "rx", "tx";
1062 status = "disabled";
1063 };
1064
1065 uart4: serial@021f0000 {
1066 compatible = "fsl,imx6ul-uart",
1067 "fsl,imx6q-uart", "fsl,imx21-uart";
1068 reg = <0x021f0000 0x4000>;
1069 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1070 clocks = <&clks IMX6UL_CLK_UART4_IPG>,
1071 <&clks IMX6UL_CLK_UART4_SERIAL>;
1072 clock-names = "ipg", "per";
1073 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
1074 dma-names = "rx", "tx";
1075 status = "disabled";
1076 };
1077
1078 uart5: serial@021f4000 {
1079 compatible = "fsl,imx6ul-uart",
1080 "fsl,imx6q-uart", "fsl,imx21-uart";
1081 reg = <0x021f4000 0x4000>;
1082 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
1083 clocks = <&clks IMX6UL_CLK_UART5_IPG>,
1084 <&clks IMX6UL_CLK_UART5_SERIAL>;
1085 clock-names = "ipg", "per";
1086 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
1087 dma-names = "rx", "tx";
1088 status = "disabled";
1089 };
1090
1091 i2c4: i2c@021f8000 {
1092 #address-cells = <1>;
1093 #size-cells = <0>;
1094 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
1095 reg = <0x021f8000 0x4000>;
1096 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
1097 clocks = <&clks IMX6UL_CLK_I2C4>;
1098 status = "disabled";
1099 };
1100
1101 uart6: serial@021fc000 {
1102 compatible = "fsl,imx6ul-uart",
1103 "fsl,imx6q-uart", "fsl,imx21-uart";
1104 reg = <0x021fc000 0x4000>;
1105 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
1106 clocks = <&clks IMX6UL_CLK_UART6_IPG>,
1107 <&clks IMX6UL_CLK_UART6_SERIAL>;
1108 clock-names = "ipg", "per";
1109 dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
1110 dma-names = "rx", "tx";
1111 status = "disabled";
1112 };
1113 };
1114
1115 aips3: aips-bus@02200000 {
1116 compatible = "fsl,aips-bus", "simple-bus";
1117 #address-cells = <1>;
1118 #size-cells = <1>;
1119 reg = <0x02200000 0x100000>;
1120 ranges;
1121
1122 dcp: dcp@02280000 {
1123 reg = <0x02280000 0x4000>;
1124 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
1125 <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
1126 <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
1127 /*clocks = <&clks IMX6UL_CLK_DCP>;*/
1128 clock-names = "dcp";
1129 status = "disabled";
1130 };
1131
1132 rngb: rngb@02284000 {
1133 reg = <0x02284000 0x4000>;
1134 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1135 };
1136
1137 uart8: serial@02288000 {
1138 compatible = "fsl,imx6ul-uart",
1139 "fsl,imx6q-uart", "fsl,imx21-uart";
1140 reg = <0x02288000 0x4000>;
1141 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
1142 clocks = <&clks IMX6UL_CLK_UART8_IPG>,
1143 <&clks IMX6UL_CLK_UART8_SERIAL>;
1144 clock-names = "ipg", "per";
1145 dmas = <&sdma 45 4 0>, <&sdma 46 4 0>;
1146 dma-names = "rx", "tx";
1147 status = "disabled";
1148 };
1149
1150 epdc: epdc@0228c000 {
1151 compatible = "fsl,imx7d-epdc";
1152 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
1153 reg = <0x0228c000 0x4000>;
1154 clocks = <&clks IMX6UL_CLK_EPDC_ACLK>,
1155 <&clks IMX6UL_CLK_EPDC_PIX>;
1156 clock-names = "epdc_axi", "epdc_pix";
1157 /* Need to fix epdc-ram */
1158 /* epdc-ram = <&gpr 0x4 30>; */
1159 status = "disabled";
1160 };
1161
1162 iomuxc_snvs: iomuxc-snvs@02290000 {
1163 compatible = "fsl,imx6ull-iomuxc-snvs";
1164 reg = <0x02290000 0x10000>;
1165 };
1166
1167 snvs_gpr: snvs-gpr@0x02294000 {
1168 compatible = "fsl, imx6ull-snvs-gpr";
1169 reg = <0x02294000 0x10000>;
1170 };
1171 };
1172 };
1173};