blob: 3b3081b10ecbef973219e8830a33d9fd40aa5e5d [file] [log] [blame]
Jagan Teki585bf8a2017-08-12 18:18:58 +05301/*
2 * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This library is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This library is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44
45#include "sun50i-a64.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48
49/ {
50 model = "Olimex A64-Olinuxino";
51 compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
52
53 aliases {
54 serial0 = &uart0;
55 };
56
57 chosen {
58 stdout-path = "serial0:115200n8";
59 };
60
Andre Przywara68dd17c2018-07-04 14:16:35 +010061 wifi_pwrseq: wifi_pwrseq {
62 compatible = "mmc-pwrseq-simple";
63 reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
Jagan Teki585bf8a2017-08-12 18:18:58 +053064 };
65};
66
67&mmc0 {
68 pinctrl-names = "default";
69 pinctrl-0 = <&mmc0_pins>;
Andre Przywara68dd17c2018-07-04 14:16:35 +010070 vmmc-supply = <&reg_dcdc1>;
71 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
Jagan Teki585bf8a2017-08-12 18:18:58 +053072 disable-wp;
73 bus-width = <4>;
74 status = "okay";
75};
76
Andre Przywara68dd17c2018-07-04 14:16:35 +010077&mmc1 {
78 pinctrl-names = "default";
79 pinctrl-0 = <&mmc1_pins>;
80 vmmc-supply = <&reg_aldo2>;
81 vqmmc-supply = <&reg_dldo4>;
82 mmc-pwrseq = <&wifi_pwrseq>;
83 bus-width = <4>;
84 non-removable;
85 status = "okay";
86
87 rtl8723bs: wifi@1 {
88 reg = <1>;
89 interrupt-parent = <&r_pio>;
90 interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
91 interrupt-names = "host-wake";
92 };
93};
94
95&r_rsb {
96 status = "okay";
97
98 axp803: pmic@3a3 {
99 compatible = "x-powers,axp803";
100 reg = <0x3a3>;
101 interrupt-parent = <&r_intc>;
102 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
103 };
104};
105
106#include "axp803.dtsi"
107
108&reg_aldo1 {
109 regulator-always-on;
110 regulator-min-microvolt = <2800000>;
111 regulator-max-microvolt = <2800000>;
112 regulator-name = "vcc-pe";
113};
114
115&reg_aldo2 {
116 regulator-always-on;
117 regulator-min-microvolt = <3300000>;
118 regulator-max-microvolt = <3300000>;
119 regulator-name = "vcc-pl";
120};
121
122&reg_aldo3 {
123 regulator-always-on;
124 regulator-min-microvolt = <3000000>;
125 regulator-max-microvolt = <3000000>;
126 regulator-name = "vcc-pll-avcc";
127};
128
129&reg_dcdc1 {
130 regulator-always-on;
131 regulator-min-microvolt = <3300000>;
132 regulator-max-microvolt = <3300000>;
133 regulator-name = "vcc-3v3";
134};
135
136&reg_dcdc2 {
137 regulator-always-on;
138 regulator-min-microvolt = <1040000>;
139 regulator-max-microvolt = <1300000>;
140 regulator-name = "vdd-cpux";
141};
142
143/* DCDC3 is polyphased with DCDC2 */
144
145&reg_dcdc5 {
146 regulator-always-on;
147 regulator-min-microvolt = <1500000>;
148 regulator-max-microvolt = <1500000>;
149 regulator-name = "vcc-ddr3";
150};
151
152&reg_dcdc6 {
153 regulator-always-on;
154 regulator-min-microvolt = <1100000>;
155 regulator-max-microvolt = <1100000>;
156 regulator-name = "vdd-sys";
157};
158
159&reg_dldo1 {
160 regulator-min-microvolt = <3300000>;
161 regulator-max-microvolt = <3300000>;
162 regulator-name = "vcc-hdmi";
163};
164
165&reg_dldo2 {
166 regulator-min-microvolt = <3300000>;
167 regulator-max-microvolt = <3300000>;
168 regulator-name = "vcc-mipi";
169};
170
171&reg_dldo3 {
172 regulator-min-microvolt = <2800000>;
173 regulator-max-microvolt = <2800000>;
174 regulator-name = "vcc-avdd-csi";
175};
176
177&reg_dldo4 {
178 regulator-min-microvolt = <3300000>;
179 regulator-max-microvolt = <3300000>;
180 regulator-name = "vcc-wifi-io";
181};
182
183&reg_eldo1 {
184 regulator-min-microvolt = <1800000>;
185 regulator-max-microvolt = <1800000>;
186 regulator-name = "cpvdd";
187};
188
189&reg_eldo2 {
190 regulator-min-microvolt = <1800000>;
191 regulator-max-microvolt = <1800000>;
192 regulator-name = "vcc-dvdd-csi";
193};
194
195&reg_fldo1 {
196 regulator-min-microvolt = <1200000>;
197 regulator-max-microvolt = <1200000>;
198 regulator-name = "vcc-1v2-hsic";
199};
200
201/*
202 * The A64 chip cannot work without this regulator off, although
203 * it seems to be only driving the AR100 core.
204 * Maybe we don't still know well about CPUs domain.
205 */
206&reg_fldo2 {
207 regulator-always-on;
208 regulator-min-microvolt = <1100000>;
209 regulator-max-microvolt = <1100000>;
210 regulator-name = "vdd-cpus";
211};
212
213&reg_rtc_ldo {
214 regulator-name = "vcc-rtc";
215};
216
Jagan Teki585bf8a2017-08-12 18:18:58 +0530217&uart0 {
218 pinctrl-names = "default";
219 pinctrl-0 = <&uart0_pins_a>;
220 status = "okay";
221};