blob: f110ee3822398eae337c2e435e9a06375163754e [file] [log] [blame]
Mylene JOSSERANDa647ea12017-05-10 08:26:07 +02001/*
2 * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
3 * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 * a) This file is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of the
13 * License, or (at your option) any later version.
14 *
15 * This file is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * Or, alternatively,
21 *
22 * b) Permission is hereby granted, free of charge, to any person
23 * obtaining a copy of this software and associated documentation
24 * files (the "Software"), to deal in the Software without
25 * restriction, including without limitation the rights to use,
26 * copy, modify, merge, publish, distribute, sublicense, and/or
27 * sell copies of the Software, and to permit persons to whom the
28 * Software is furnished to do so, subject to the following
29 * conditions:
30 *
31 * The above copyright notice and this permission notice shall be
32 * included in all copies or substantial portions of the Software.
33 *
34 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 * OTHER DEALINGS IN THE SOFTWARE.
42 */
43
44/dts-v1/;
45#include "sun8i-h3.dtsi"
46#include "sunxi-common-regulators.dtsi"
47
48#include <dt-bindings/gpio/gpio.h>
49#include <dt-bindings/input/input.h>
50
51/ {
52 aliases {
53 serial0 = &uart0;
54 };
55
56 chosen {
57 stdout-path = "serial0:115200n8";
58 };
59
60 leds {
61 compatible = "gpio-leds";
62 pinctrl-names = "default";
63 pinctrl-0 = <&leds_npi>, <&leds_r_npi>;
64
65 status {
66 label = "nanopi:blue:status";
67 gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
68 linux,default-trigger = "heartbeat";
69 };
70
71 pwr {
72 label = "nanopi:green:pwr";
73 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
74 default-state = "on";
75 };
76 };
77
78 r_gpio_keys {
79 compatible = "gpio-keys";
80 input-name = "k1";
81 pinctrl-names = "default";
82 pinctrl-0 = <&sw_r_npi>;
83
Andre Przywara2d0c3d62018-07-04 14:16:38 +010084 k1 {
Mylene JOSSERANDa647ea12017-05-10 08:26:07 +020085 label = "k1";
86 linux,code = <KEY_POWER>;
87 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
88 };
89 };
90};
91
92&ehci3 {
93 status = "okay";
94};
95
96&mmc0 {
97 bus-width = <4>;
Andre Przywara2d0c3d62018-07-04 14:16:38 +010098 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
Mylene JOSSERANDa647ea12017-05-10 08:26:07 +020099 status = "okay";
100 vmmc-supply = <&reg_vcc3v3>;
101};
102
103&ohci3 {
104 status = "okay";
105};
106
107&pio {
Andre Przywara2d0c3d62018-07-04 14:16:38 +0100108 leds_npi: led_pins {
Mylene JOSSERANDa647ea12017-05-10 08:26:07 +0200109 pins = "PA10";
110 function = "gpio_out";
111 };
112};
113
114&r_pio {
Andre Przywara2d0c3d62018-07-04 14:16:38 +0100115 leds_r_npi: led_pins {
Mylene JOSSERANDa647ea12017-05-10 08:26:07 +0200116 pins = "PL10";
117 function = "gpio_out";
118 };
119
Andre Przywara2d0c3d62018-07-04 14:16:38 +0100120 sw_r_npi: key_pins {
Mylene JOSSERANDa647ea12017-05-10 08:26:07 +0200121 pins = "PL3";
122 function = "gpio_in";
123 };
124};
125
126&uart0 {
127 pinctrl-names = "default";
128 pinctrl-0 = <&uart0_pins_a>;
129 status = "okay";
130};
131
132&usbphy {
133 status = "okay";
134};