blob: 6e8a4b808543aa24d586922871bbfcc1e8a2d2c5 [file] [log] [blame]
wdenk8966f332002-10-31 23:30:59 +00001/*
2 * (C) Copyright 2000, 2001
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 * (C) Copyright 2001
5 * Torsten Stevens, FHG IMS, stevens@ims.fhg.de
6 * Bruno Achauer, Exet AG, bruno@exet-ag.de.
7 *
8 * See file CREDITS for list of people who contributed to this
9 * project.
10 *
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 * MA 02111-1307 USA
25 */
26
27/*
28 * board/config.h - configuration options, board specific
29 * [derived from config_TQM850L.h]
30 */
31
32#ifndef __CONFIG_H
33#define __CONFIG_H
34
35/*
36 * High Level Configuration Options
37 * (easy to change)
38 */
39
40#define CONFIG_MPC850 1 /* This is a MPC850 CPU */
41#define CONFIG_LANTEC 2 /* ...on a Lantec rev.2 board */
42
43/*
44 * Port assignments (CONFIG_LANTEC == 1):
45 * - SMC1: J11 (MDB) ?
46 * - SMC2: J6 (Feature connector)
47 * - SCC2: J9 (RJ45)
48 * - SCC3: J8 (Sub-D9)
49 *
50 * Port assignments (CONFIG_LANTEC == 2): TBD
51 */
52
53
54#undef CONFIG_8xx_CONS_SMC2 /* Console is on SMC2 */
55#define CONFIG_8xx_CONS_SCC3
56#undef CONFIG_8xx_CONS_NONE
57#define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */
58#if 0
59#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
60#else
61#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
62#endif
63
64#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
65
66#undef CONFIG_BOOTARGS
67#define CONFIG_BOOTCOMMAND \
68 "setenv bootargs root=/dev/ram panic=5;bootm 40040000 400A0000"
69
70#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020071#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
wdenk8966f332002-10-31 23:30:59 +000072
73#undef CONFIG_WATCHDOG /* watchdog disabled */
74
75#define CONFIG_STATUS_LED 1 /* Status LED enabled */
76
Jon Loeliger7be044e2007-07-09 21:24:19 -050077/*
78 * BOOTP options
79 */
80#define CONFIG_BOOTP_SUBNETMASK
81#define CONFIG_BOOTP_GATEWAY
82#define CONFIG_BOOTP_HOSTNAME
83#define CONFIG_BOOTP_BOOTPATH
84#define CONFIG_BOOTP_BOOTFILESIZE
wdenk8966f332002-10-31 23:30:59 +000085
Jon Loeliger348f2582007-07-08 13:46:18 -050086
87/*
88 * Command line configuration.
89 */
Jean-Christophe PLAGNIOL-VILLARD4e620412007-10-24 18:16:01 +020090#include <config_cmd_default.h>
Jon Loeliger348f2582007-07-08 13:46:18 -050091
Jean-Christophe PLAGNIOL-VILLARD4e620412007-10-24 18:16:01 +020092#define CONFIG_CMD_ASKENV
93#define CONFIG_CMD_CACHE
94#define CONFIG_CMD_CDP
95#define CONFIG_CMD_DATE
96#define CONFIG_CMD_DHCP
97#define CONFIG_CMD_DIAG
98#define CONFIG_CMD_FAT
99#define CONFIG_CMD_IMMAP
100#define CONFIG_CMD_PING
101#define CONFIG_CMD_PORTIO
102#define CONFIG_CMD_REGINFO
103#define CONFIG_CMD_SAVES
104#define CONFIG_CMD_SDRAM
105#define CONFIG_CMD_SNTP
106
Jon Loeliger348f2582007-07-08 13:46:18 -0500107#undef CONFIG_CMD_XIMG
108
109#if !(CONFIG_LANTEC >= 2)
110 #undef CONFIG_CMD_DATE
111 #undef CONFIG_CMD_NET
112#endif
113
wdenk8966f332002-10-31 23:30:59 +0000114
115#if CONFIG_LANTEC >= 2
116#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
117#endif
118
wdenk8966f332002-10-31 23:30:59 +0000119/*
120 * Miscellaneous configurable options
121 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200122#define CONFIG_SYS_LONGHELP /* undef to save memory */
123#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
Jon Loeliger348f2582007-07-08 13:46:18 -0500124#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200125#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenk8966f332002-10-31 23:30:59 +0000126#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200127#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenk8966f332002-10-31 23:30:59 +0000128#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200129#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
130#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
131#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenk8966f332002-10-31 23:30:59 +0000132
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200133#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
134#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
wdenk8966f332002-10-31 23:30:59 +0000135
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200136#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
wdenk8966f332002-10-31 23:30:59 +0000137
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200138#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
wdenk8966f332002-10-31 23:30:59 +0000139
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200140#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
wdenk8966f332002-10-31 23:30:59 +0000141
142/*
143 * Low Level Configuration Settings
144 * (address mappings, register initial values, etc.)
145 * You should know what you are doing if you make changes here.
146 */
147/*-----------------------------------------------------------------------
148 * Internal Memory Mapped Register
149 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200150#define CONFIG_SYS_IMMR 0xFFF00000
wdenk8966f332002-10-31 23:30:59 +0000151
152/*-----------------------------------------------------------------------
153 * Definitions for initial stack pointer and data area (in DPRAM)
154 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200155#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
156#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
157#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
158#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
159#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
wdenk8966f332002-10-31 23:30:59 +0000160
161/*-----------------------------------------------------------------------
162 * Start addresses for the final memory configuration
163 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200164 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenk8966f332002-10-31 23:30:59 +0000165 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200166#define CONFIG_SYS_SDRAM_BASE 0x00000000
167#define CONFIG_SYS_FLASH_BASE 0x40000000
168#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
169#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
170#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
wdenk8966f332002-10-31 23:30:59 +0000171
172/*
173 * For booting Linux, the board info and command line data
174 * have to be in the first 8 MB of memory, since this is
175 * the maximum mapped by the Linux kernel during initialization.
176 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200177#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenk8966f332002-10-31 23:30:59 +0000178
179/*-----------------------------------------------------------------------
180 * FLASH organization
181 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200182#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
183#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
wdenk8966f332002-10-31 23:30:59 +0000184
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200185#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
186#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
wdenk8966f332002-10-31 23:30:59 +0000187
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200188#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200189#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
190#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
wdenk8966f332002-10-31 23:30:59 +0000191
192/*-----------------------------------------------------------------------
193 * Cache Configuration
194 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200195#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Jon Loeliger348f2582007-07-08 13:46:18 -0500196#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200197#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
wdenk8966f332002-10-31 23:30:59 +0000198#endif
199
200/*-----------------------------------------------------------------------
201 * SYPCR - System Protection Control 11-9
202 * SYPCR can only be written once after reset!
203 *-----------------------------------------------------------------------
204 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
205 */
206#if defined(CONFIG_WATCHDOG)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200207#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
wdenk8966f332002-10-31 23:30:59 +0000208 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
209#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200210#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
wdenk8966f332002-10-31 23:30:59 +0000211#endif
212
213/*-----------------------------------------------------------------------
214 * SIUMCR - SIU Module Configuration 11-6
215 *-----------------------------------------------------------------------
216 * PCMCIA config., multi-function pin tri-state
217 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200218#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_DLK)
wdenk8966f332002-10-31 23:30:59 +0000219
220/*-----------------------------------------------------------------------
221 * Clock Setting - Has the Lantec board a 32kHz clock ??? [XXX]
222 *-----------------------------------------------------------------------
223 */
224#define CONFIG_8xx_GCLK_FREQ 33000000
225
226/*-----------------------------------------------------------------------
227 * TBSCR - Time Base Status and Control 11-26
228 *-----------------------------------------------------------------------
229 * Clear Reference Interrupt Status, Timebase freezing enabled
230 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200231#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
wdenk8966f332002-10-31 23:30:59 +0000232
233/*-----------------------------------------------------------------------
234 * RTCSC - Real-Time Clock Status and Control Register 11-27
235 *-----------------------------------------------------------------------
236 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200237#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
wdenk8966f332002-10-31 23:30:59 +0000238
239/*-----------------------------------------------------------------------
240 * PISCR - Periodic Interrupt Status and Control 11-31
241 *-----------------------------------------------------------------------
242 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
243 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200244#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
wdenk8966f332002-10-31 23:30:59 +0000245
246/*-----------------------------------------------------------------------
247 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
248 *-----------------------------------------------------------------------
249 * Reset PLL lock status sticky bit, timer expired status bit and timer
250 * interrupt status bit
251 *
252 * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
253 */
254 /* up to 50 MHz we use a 1:1 clock */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200255#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
wdenk8966f332002-10-31 23:30:59 +0000256
257/*-----------------------------------------------------------------------
258 * SCCR - System Clock and reset Control Register 15-27
259 *-----------------------------------------------------------------------
260 * Set clock output, timebase and RTC source and divider,
261 * power management and some other internal clocks
262 */
263#define SCCR_MASK SCCR_EBDF11
264 /* up to 50 MHz we use a 1:1 clock */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200265#define CONFIG_SYS_SCCR (SCCR_TBS | \
wdenk8966f332002-10-31 23:30:59 +0000266 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
267 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
268 SCCR_DFALCD00)
269
270/*-----------------------------------------------------------------------
271 *
272 *-----------------------------------------------------------------------
273 *
274 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200275#define CONFIG_SYS_DER 0
wdenk8966f332002-10-31 23:30:59 +0000276
277/*
278 * Init Memory Controller:
279 *
280 * BR0/5 and OR0/5 (FLASH)
281 */
282
283#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
284#define FLASH_BASE5_PRELIM 0x60000000 /* FLASH bank #1 */
285
286/* used to re-map FLASH both when starting from SRAM or FLASH:
287 * restrict access enough to keep SRAM working (if any)
288 * but not too much to meddle with FLASH accesses
289 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200290#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
291#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
wdenk8966f332002-10-31 23:30:59 +0000292
293/* FLASH timing */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200294#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | \
wdenk8bde7f72003-06-27 21:31:46 +0000295 OR_SCY_5_CLK | OR_TRLX)
wdenk8966f332002-10-31 23:30:59 +0000296
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200297#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
298#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
299#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
wdenk8966f332002-10-31 23:30:59 +0000300
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200301#define CONFIG_SYS_OR5_REMAP CONFIG_SYS_OR0_REMAP
302#define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_OR0_PRELIM
303#define CONFIG_SYS_BR5_PRELIM ((FLASH_BASE5_PRELIM & BR_BA_MSK) | BR_V )
wdenk8966f332002-10-31 23:30:59 +0000304
305/*
306 * BR2/3 and OR2/3 (SDRAM)
307 *
308 */
309#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */
310#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
311
312/* SDRAM timing: Multiplexed addresses */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200313#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM)
wdenk8966f332002-10-31 23:30:59 +0000314
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200315#define CONFIG_SYS_OR3_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
316#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
wdenk8966f332002-10-31 23:30:59 +0000317
318/*
319 * Memory Periodic Timer Prescaler
320 */
321
322/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200323#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
324#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
wdenk8966f332002-10-31 23:30:59 +0000325
326/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200327#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
328#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
wdenk8966f332002-10-31 23:30:59 +0000329
330/*
331 * MAMR settings for SDRAM
332 */
333/* periodic timer for refresh */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200334#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */
wdenk8966f332002-10-31 23:30:59 +0000335
336/* 8 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200337#define CONFIG_SYS_MAMR_8COL \
338 ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
wdenk8966f332002-10-31 23:30:59 +0000339 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
340 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
341
342/*
343 * Internal Definitions
344 *
345 * Boot Flags
346 */
347#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
348#define BOOTFLAG_WARM 0x02 /* Software reboot */
349
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200350/*
351 * JFFS2 partitions
352 *
353 */
354/* No command line, one static partition, whole device */
Stefan Roese68d7d652009-03-19 13:30:36 +0100355#undef CONFIG_CMD_MTDPARTS
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200356#define CONFIG_JFFS2_DEV "nor0"
357#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
358#define CONFIG_JFFS2_PART_OFFSET 0x00000000
359
360/* mtdparts command line support */
361/*
Stefan Roese68d7d652009-03-19 13:30:36 +0100362#define CONFIG_CMD_MTDPARTS
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200363#define MTDIDS_DEFAULT ""
364#define MTDPARTS_DEFAULT ""
365*/
366
wdenk8966f332002-10-31 23:30:59 +0000367#endif /* __CONFIG_H */