Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 2e8d47c641aa951c8d8a7f401e2c652af1355f28 / . / arch / arm / dts / imx6q-ba16.dtsi
blob: 9da2bb6e869ee69ae73eb3ff2a2b81b3af00aed4 [file] [log] [blame]
Robert Beckett8c267392019-11-12 19:15:11 +0000[diff] [blame]1// SPDX-License-Identifier: GPL-2.0+ OR X11
2/*
3 * Support for imx6 based Advantech DMS-BA16 Qseven module
4 *
5 * Copyright 2015 Timesys Corporation.
6 * Copyright 2015 General Electric Company
7 *
8 * This file is dual-licensed: you can use it either under the terms
9 * of the GPL or the X11 license, at your option. Note that this dual
10 * licensing only applies to this file, and not this project as a
11 * whole.
12 *
13 * a) This file is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License
15 * version 2 as published by the Free Software Foundation.
16 *
17 * This file is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * Or, alternatively,
23 *
24 * b) Permission is hereby granted, free of charge, to any person
25 * obtaining a copy of this software and associated documentation
26 * files (the "Software"), to deal in the Software without
27 * restriction, including without limitation the rights to use,
28 * copy, modify, merge, publish, distribute, sublicense, and/or
29 * sell copies of the Software, and to permit persons to whom the
30 * Software is furnished to do so, subject to the following
31 * conditions:
32 *
33 * The above copyright notice and this permission notice shall be
34 * included in all copies or substantial portions of the Software.
35 *
36 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
37 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
38 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
39 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
40 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
41 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
42 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
43 * OTHER DEALINGS IN THE SOFTWARE.
44 */
45
46#include "imx6q.dtsi"
47#include <dt-bindings/gpio/gpio.h>
48
49/ {
50 memory@10000000 {
51 device_type = "memory";
52 reg = <0x10000000 0x40000000>;
53 };
54
55 backlight_lvds: backlight {
56 compatible = "pwm-backlight";
57 pinctrl-names = "default";
58 pinctrl-0 = <&pinctrl_display>;
59 pwms = <&pwm1 0 5000000>;
60 brightness-levels = < 0 1 2 3 4 5 6 7 8 9
61 10 11 12 13 14 15 16 17 18 19
62 20 21 22 23 24 25 26 27 28 29
63 30 31 32 33 34 35 36 37 38 39
64 40 41 42 43 44 45 46 47 48 49
65 50 51 52 53 54 55 56 57 58 59
66 60 61 62 63 64 65 66 67 68 69
67 70 71 72 73 74 75 76 77 78 79
68 80 81 82 83 84 85 86 87 88 89
69 90 91 92 93 94 95 96 97 98 99
70 100 101 102 103 104 105 106 107 108 109
71 110 111 112 113 114 115 116 117 118 119
72 120 121 122 123 124 125 126 127 128 129
73 130 131 132 133 134 135 136 137 138 139
74 140 141 142 143 144 145 146 147 148 149
75 150 151 152 153 154 155 156 157 158 159
76 160 161 162 163 164 165 166 167 168 169
77 170 171 172 173 174 175 176 177 178 179
78 180 181 182 183 184 185 186 187 188 189
79 190 191 192 193 194 195 196 197 198 199
80 200 201 202 203 204 205 206 207 208 209
81 210 211 212 213 214 215 216 217 218 219
82 220 221 222 223 224 225 226 227 228 229
83 230 231 232 233 234 235 236 237 238 239
84 240 241 242 243 244 245 246 247 248 249
85 250 251 252 253 254 255>;
86 default-brightness-level = <255>;
87 enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
88 };
89
90 reg_1p8v: regulator-1p8v {
91 compatible = "regulator-fixed";
92 regulator-name = "1P8V";
93 regulator-min-microvolt = <1800000>;
94 regulator-max-microvolt = <1800000>;
95 regulator-always-on;
96 };
97
98 reg_3p3v: regulator-3p3v {
99 compatible = "regulator-fixed";
100 regulator-name = "3P3V";
101 regulator-min-microvolt = <3300000>;
102 regulator-max-microvolt = <3300000>;
103 regulator-always-on;
104 };
105
106 reg_lvds: regulator-lvds {
107 compatible = "regulator-fixed";
108 regulator-name = "lvds_ppen";
109 regulator-min-microvolt = <3300000>;
110 regulator-max-microvolt = <3300000>;
111 regulator-boot-on;
112 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
113 enable-active-high;
114 };
115
116 reg_usb_h1_vbus: regulator-usbh1vbus {
117 compatible = "regulator-fixed";
118 regulator-name = "usb_h1_vbus";
119 regulator-min-microvolt = <5000000>;
120 regulator-max-microvolt = <5000000>;
121 };
122
123 reg_usb_otg_vbus: regulator-usbotgvbus {
124 compatible = "regulator-fixed";
125 regulator-name = "usb_otg_vbus";
126 regulator-min-microvolt = <5000000>;
127 regulator-max-microvolt = <5000000>;
128 };
129};
130
131&audmux {
132 pinctrl-names = "default";
133 pinctrl-0 = <&pinctrl_audmux>;
134 status = "okay";
135};
136
137&ecspi1 {
138 cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
139 pinctrl-names = "default";
140 pinctrl-0 = <&pinctrl_ecspi1>;
141 status = "okay";
142
143 flash: n25q032@0 {
144 compatible = "jedec,spi-nor";
145 #address-cells = <1>;
146 #size-cells = <1>;
147 spi-max-frequency = <20000000>;
148 reg = <0>;
149
150 partition@0 {
151 label = "U-Boot";
152 reg = <0x0 0xc0000>;
153 };
154
155 partition@c0000 {
156 label = "env";
157 reg = <0xc0000 0x10000>;
158 };
159
160 partition@d0000 {
161 label = "spare";
162 reg = <0xd0000 0x320000>;
163 };
164
165 partition@3f0000 {
166 label = "mfg";
167 reg = <0x3f0000 0x10000>;
168 };
169 };
170};
171
172&fec {
173 pinctrl-names = "default";
174 pinctrl-0 = <&pinctrl_enet>;
175 phy-mode = "rgmii-id";
176 status = "okay";
Sebastian Reichel717bf502020-12-15 00:41:57 +0100[diff] [blame]177 phy-handle = <&phy0>;
178
179 mdio {
180 #address-cells = <1>;
181 #size-cells = <0>;
182
183 phy0: ethernet-phy@4 {
184 reg = <4>;
185 qca,clk-out-frequency = <125000000>;
186 };
187 };
Robert Beckett8c267392019-11-12 19:15:11 +0000[diff] [blame]188};
189
190&hdmi {
191 ddc-i2c-bus = <&i2c2>;
192 status = "okay";
193};
194
195&i2c1 {
196 clock-frequency = <100000>;
197 pinctrl-names = "default";
198 pinctrl-0 = <&pinctrl_i2c1>;
199 status = "okay";
200};
201
202&i2c2 {
203 clock-frequency = <100000>;
204 pinctrl-names = "default";
205 pinctrl-0 = <&pinctrl_i2c2>;
206 status = "okay";
207};
208
209&i2c3 {
210 clock-frequency = <100000>;
211 pinctrl-names = "default";
212 pinctrl-0 = <&pinctrl_i2c3>;
213 status = "okay";
214
215 pmic@58 {
216 compatible = "dlg,da9063";
217 reg = <0x58>;
218 pinctrl-names = "default";
219 pinctrl-0 = <&pinctrl_pmic>;
220 interrupt-parent = <&gpio7>;
221 interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
222
223 onkey {
224 compatible = "dlg,da9063-onkey";
225 };
226
227 regulators {
228 vdd_bcore1: bcore1 {
229 regulator-min-microvolt = <1420000>;
230 regulator-max-microvolt = <1420000>;
231 regulator-always-on;
232 regulator-boot-on;
233 };
234
235 vdd_bcore2: bcore2 {
236 regulator-min-microvolt = <1420000>;
237 regulator-max-microvolt = <1420000>;
238 regulator-always-on;
239 regulator-boot-on;
240 };
241
242 vdd_bpro: bpro {
243 regulator-min-microvolt = <1500000>;
244 regulator-max-microvolt = <1500000>;
245 regulator-always-on;
246 regulator-boot-on;
247 };
248
249 vdd_bmem: bmem {
250 regulator-min-microvolt = <1800000>;
251 regulator-max-microvolt = <1800000>;
252 regulator-always-on;
253 regulator-boot-on;
254 };
255
256 vdd_bio: bio {
257 regulator-min-microvolt = <1800000>;
258 regulator-max-microvolt = <1800000>;
259 regulator-always-on;
260 regulator-boot-on;
261 };
262
263 vdd_bperi: bperi {
264 regulator-min-microvolt = <3300000>;
265 regulator-max-microvolt = <3300000>;
266 regulator-always-on;
267 regulator-boot-on;
268 };
269
270 vdd_ldo1: ldo1 {
271 regulator-min-microvolt = <600000>;
272 regulator-max-microvolt = <1860000>;
273 };
274
275 vdd_ldo2: ldo2 {
276 regulator-min-microvolt = <600000>;
277 regulator-max-microvolt = <1860000>;
278 };
279
280 vdd_ldo3: ldo3 {
281 regulator-min-microvolt = <900000>;
282 regulator-max-microvolt = <3440000>;
283 };
284
285 vdd_ldo4: ldo4 {
286 regulator-min-microvolt = <900000>;
287 regulator-max-microvolt = <3440000>;
288 };
289
290 vdd_ldo5: ldo5 {
291 regulator-min-microvolt = <900000>;
292 regulator-max-microvolt = <3600000>;
293 };
294
295 vdd_ldo6: ldo6 {
296 regulator-min-microvolt = <900000>;
297 regulator-max-microvolt = <3600000>;
298 };
299
300 vdd_ldo7: ldo7 {
301 regulator-min-microvolt = <900000>;
302 regulator-max-microvolt = <3600000>;
303 };
304
305 vdd_ldo8: ldo8 {
306 regulator-min-microvolt = <900000>;
307 regulator-max-microvolt = <3600000>;
308 };
309
310 vdd_ldo9: ldo9 {
311 regulator-min-microvolt = <950000>;
312 regulator-max-microvolt = <3600000>;
313 };
314
315 vdd_ldo10: ldo10 {
316 regulator-min-microvolt = <900000>;
317 regulator-max-microvolt = <3600000>;
318 };
319
320 vdd_ldo11: ldo11 {
321 regulator-min-microvolt = <900000>;
322 regulator-max-microvolt = <3600000>;
323 regulator-always-on;
324 regulator-boot-on;
325 };
326 };
327 };
328
329 rtc@32 {
330 compatible = "epson,rx8010";
331 pinctrl-names = "default";
332 pinctrl-0 = <&pinctrl_rtc>;
333 reg = <0x32>;
334 interrupt-parent = <&gpio4>;
335 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
336 };
337};
338
339&pcie {
340 pinctrl-names = "default";
341 pinctrl-0 = <&pinctrl_pcie>;
342 reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
343 fsl,tx-swing-full = <103>;
344 fsl,tx-swing-low = <103>;
345 status = "okay";
346};
347
348&pwm1 {
349 pinctrl-names = "default";
350 pinctrl-0 = <&pinctrl_pwm1>;
351 status = "okay";
352};
353
354&pwm2 {
355 pinctrl-names = "default";
356 pinctrl-0 = <&pinctrl_pwm2>;
357 status = "disabled";
358};
359
360&sata {
361 status = "okay";
362};
363
364&ssi1 {
365 status = "okay";
366};
367
368&uart3 {
369 pinctrl-names = "default";
370 pinctrl-0 = <&pinctrl_uart3>;
371 uart-has-rtscts;
372 status = "okay";
373};
374
375&uart4 {
376 pinctrl-names = "default";
377 pinctrl-0 = <&pinctrl_uart4>;
378 status = "okay";
379};
380
381&usbh1 {
382 pinctrl-names = "default";
383 pinctrl-0 = <&pinctrl_usbhub>;
384 vbus-supply = <&reg_usb_h1_vbus>;
385 reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
386 status = "okay";
387};
388
389&usbotg {
390 vbus-supply = <&reg_usb_otg_vbus>;
391 pinctrl-names = "default";
392 pinctrl-0 = <&pinctrl_usbotg>;
393 disable-over-current;
394 status = "okay";
395};
396
397&usdhc2 {
398 pinctrl-names = "default";
399 pinctrl-0 = <&pinctrl_usdhc2>;
400 cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
401 no-1-8-v;
402 keep-power-in-suspend;
403 wakeup-source;
404 status = "okay";
405};
406
407&usdhc3 {
408 pinctrl-names = "default";
409 pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
410 bus-width = <8>;
411 vmmc-supply = <&vdd_bperi>;
412 non-removable;
413 keep-power-in-suspend;
414 status = "okay";
415};
416
417&wdog1 {
418 pinctrl-names = "default";
419 pinctrl-0 = <&pinctrl_wdog>;
420 fsl,ext-reset-output;
421};
422
423&iomuxc {
424 pinctrl-names = "default";
425 pinctrl-0 = <&pinctrl_hog>;
426
427 pinctrl_audmux: audmuxgrp {
428 fsl,pins = <
429 MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
430 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
431 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
432 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
433 >;
434 };
435
436 pinctrl_display: dispgrp {
437 fsl,pins = <
438 /* BLEN_OUT */
439 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
440 /* LVDS_PPEN_OUT */
441 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
442 >;
443 };
444
445 pinctrl_ecspi1: ecspi1grp {
446 fsl,pins = <
447 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
448 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
449 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
450 /* SPI1 CS */
451 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
452 >;
453 };
454
455 pinctrl_ecspi5: ecspi5grp {
456 fsl,pins = <
457 MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b0b0
458 MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x1b0b0
459 MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x1b0b0
460 MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
461 >;
462 };
463
464 pinctrl_enet: enetgrp {
465 fsl,pins = <
466 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
467 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
468 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
469 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
470 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
471 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
472 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
473 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
474 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
475 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
476 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
477 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
478 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
479 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
480 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
481 /* FEC Reset */
482 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
483 /* AR8033 Interrupt */
484 MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
485 >;
486 };
487
488 pinctrl_hog: hoggrp {
489 fsl,pins = <
490 /* GPIO 0-7 */
491 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
492 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
493 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
494 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
495 MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
496 MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0
497 MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0
498 MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x1b0b0
499 /* SUS_S3_OUT to CPLD */
500 MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
501 >;
502 };
503
504 pinctrl_i2c1: i2c1grp {
505 fsl,pins = <
506 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
507 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
508 >;
509 };
510
511 pinctrl_i2c2: i2c2grp {
512 fsl,pins = <
513 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
514 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
515 >;
516 };
517
518 pinctrl_i2c3: i2c3grp {
519 fsl,pins = <
520 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
521 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
522 >;
523 };
524
525 pinctrl_pcie: pciegrp {
526 fsl,pins = <
527 /* PCIe Reset */
528 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
529 /* PCIe Wake */
530 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0
531 >;
532 };
533
534 pinctrl_pmic: pmicgrp {
535 fsl,pins = <
536 /* PMIC Interrupt */
537 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
538 >;
539 };
540
541 pinctrl_pwm1: pwm1grp {
542 fsl,pins = <
543 MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
544 >;
545 };
546
547 pinctrl_pwm2: pwm2grp {
548 fsl,pins = <
549 MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
550 >;
551 };
552
553 pinctrl_rtc: rtcgrp {
554 fsl,pins = <
555 /* RTC_INT */
556 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
557 >;
558 };
559
560 pinctrl_uart3: uart3grp {
561 fsl,pins = <
562 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
563 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
564 MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
565 MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
566 >;
567 };
568
569 pinctrl_uart4: uart4grp {
570 fsl,pins = <
571 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
572 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
573 >;
574 };
575
576 pinctrl_usbhub: usbhubgrp {
577 fsl,pins = <
578 /* HUB_RESET */
579 MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0
580 >;
581 };
582
583 pinctrl_usbotg: usbotggrp {
584 fsl,pins = <
585 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
586 >;
587 };
588
589 pinctrl_usdhc2: usdhc2grp {
590 fsl,pins = <
591 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
592 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
593 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
594 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
595 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
596 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
597 /* uSDHC2 CD */
598 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
599 >;
600 };
601
602 pinctrl_usdhc3: usdhc3grp {
603 fsl,pins = <
604 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
605 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
606 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
607 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
608 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
609 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
610 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
611 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
612 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
613 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
614 >;
615 };
616
617 pinctrl_usdhc3_reset: usdhc3grp-reset {
618 fsl,pins = <
619 MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9
620 >;
621 };
622
623 pinctrl_usdhc4: usdhc4grp {
624 fsl,pins = <
625 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
626 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
627 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
628 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
629 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
630 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
631 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
632 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
633 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
634 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
635 /* uSDHC4 CD */
636 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
637 /* uSDHC4 SDIO PWR */
638 MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
639 /* uSDHC4 SDIO WP */
640 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
641 /* uSDHC4 SDIO LED */
642 MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
643 >;
644 };
645
646 pinctrl_wdog: wdoggrp {
647 fsl,pins = <
648 MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
649 >;
650 };
651};