blob: 83c6d3f872ffa2a5cdb512c3c8c4e5d3019d5519 [file] [log] [blame]
Hans de Goede53ab4af2015-04-15 19:03:49 +02001/*
2 * Copyright 2015 Aleksei Mamlin
3 * Aleksei Mamlin <mamlinav@gmail.com>
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 * a) This file is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of the
13 * License, or (at your option) any later version.
14 *
15 * This file is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
Hans de Goede53ab4af2015-04-15 19:03:49 +020020 * Or, alternatively,
21 *
22 * b) Permission is hereby granted, free of charge, to any person
23 * obtaining a copy of this software and associated documentation
24 * files (the "Software"), to deal in the Software without
25 * restriction, including without limitation the rights to use,
26 * copy, modify, merge, publish, distribute, sublicense, and/or
27 * sell copies of the Software, and to permit persons to whom the
28 * Software is furnished to do so, subject to the following
29 * conditions:
30 *
31 * The above copyright notice and this permission notice shall be
32 * included in all copies or substantial portions of the Software.
33 *
34 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 * OTHER DEALINGS IN THE SOFTWARE.
42 */
43
44/dts-v1/;
45#include "sun7i-a20.dtsi"
46#include "sunxi-common-regulators.dtsi"
47
48#include <dt-bindings/gpio/gpio.h>
49#include <dt-bindings/input/input.h>
50#include <dt-bindings/interrupt-controller/irq.h>
51
52/ {
53 model = "Wexler TAB7200";
54 compatible = "wexler,tab7200", "allwinner,sun7i-a20";
55
56 aliases {
57 serial0 = &uart0;
58 };
59
60 chosen {
61 stdout-path = "serial0:115200n8";
62 };
63};
64
65&cpu0 {
66 cpu-supply = <&reg_dcdc2>;
67};
68
69&ehci0 {
70 status = "okay";
71};
72
73&ehci1 {
74 status = "okay";
75};
76
77&i2c0 {
78 pinctrl-names = "default";
79 pinctrl-0 = <&i2c0_pins_a>;
80 status = "okay";
81
82 axp209: pmic@34 {
83 reg = <0x34>;
84 interrupt-parent = <&nmi_intc>;
85 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
86 };
87};
88
89&i2c1 {
90 pinctrl-names = "default";
91 pinctrl-0 = <&i2c1_pins_a>;
92 status = "okay";
93};
94
95&i2c2 {
96 pinctrl-names = "default";
97 pinctrl-0 = <&i2c2_pins_a>;
98 status = "okay";
99};
100
101&lradc {
102 vref-supply = <&reg_vcc3v0>;
103 status = "okay";
104
105 button@571 {
106 label = "Volume Up";
107 linux,code = <KEY_VOLUMEUP>;
108 channel = <0>;
109 voltage = <571428>;
110 };
111
112 button@761 {
113 label = "Volume Down";
114 linux,code = <KEY_VOLUMEDOWN>;
115 channel = <0>;
116 voltage = <761904>;
117 };
118};
119
120&mmc0 {
121 pinctrl-names = "default";
122 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
123 vmmc-supply = <&reg_vcc3v3>;
124 bus-width = <4>;
125 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
126 cd-inverted;
127 status = "okay";
128};
129
130&ohci0 {
131 status = "okay";
132};
133
134&ohci1 {
135 status = "okay";
136};
137
138#include "axp209.dtsi"
139
140&reg_dcdc2 {
141 regulator-always-on;
142 regulator-min-microvolt = <1000000>;
143 regulator-max-microvolt = <1450000>;
144 regulator-name = "vdd-cpu";
145};
146
147&reg_dcdc3 {
148 regulator-always-on;
149 regulator-min-microvolt = <1000000>;
150 regulator-max-microvolt = <1400000>;
151 regulator-name = "vdd-int-dll";
152};
153
154&reg_ldo1 {
155 regulator-name = "vdd-rtc";
156};
157
158&reg_ldo2 {
159 regulator-always-on;
160 regulator-min-microvolt = <3000000>;
161 regulator-max-microvolt = <3000000>;
162 regulator-name = "avcc";
163};
164
165&reg_usb1_vbus {
166 status = "okay";
167};
168
169&reg_usb2_vbus {
170 status = "okay";
171};
172
173&uart0 {
174 pinctrl-names = "default";
175 pinctrl-0 = <&uart0_pins_a>;
176 status = "okay";
177};
178
179&usbphy {
180 usb1_vbus-supply = <&reg_usb1_vbus>;
181 usb2_vbus-supply = <&reg_usb2_vbus>;
182 status = "okay";
183};