blob: 5254e7d5f5d0e7218dd63b8e59965b437eaa42e4 [file] [log] [blame]
Louis Su30f57472008-07-09 11:01:37 +08001/* ax88180.h: ASIX AX88180 Non-PCI Gigabit Ethernet u-boot driver */
2/*
3 *
4 * This program is free software; you can distribute it and/or modify it
5 * under the terms of the GNU General Public License (Version 2) as
6 * published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
11 * for more details.
12 *
13 * You should have received a copy of the GNU General Public License along
14 * with this program; if not, write to the Free Software Foundation, Inc.,
15 * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
16 *
17 */
18
19#ifndef _AX88180_H_
20#define _AX88180_H_
21
22#include <asm/types.h>
23#include <config.h>
24
25typedef enum _ax88180_link_state {
26 INS_LINK_DOWN,
27 INS_LINK_UP,
28 INS_LINK_UNKNOWN
29} ax88180_link_state;
30
31struct ax88180_private {
32 unsigned char BusWidth;
33 unsigned char PadSize;
34 unsigned short PhyAddr;
35 unsigned short PhyID0;
36 unsigned short FirstTxDesc;
37 unsigned short NextTxDesc;
38 ax88180_link_state LinkState;
39};
40
41#define BUS_WIDTH_16 1
42#define BUS_WIDTH_32 2
43
44#define ENABLE_JUMBO 1
45#define DISABLE_JUMBO 0
46
47#define ENABLE_BURST 1
48#define DISABLE_BURST 0
49
50#define NORMAL_RX_MODE 0
51#define RX_LOOPBACK_MODE 1
52#define RX_INIFINIT_LOOP_MODE 2
53#define TX_INIFINIT_LOOP_MODE 3
54
55#define DEFAULT_ETH_MTU 1500
56
57/* Jumbo packet size 4086 bytes included 4 bytes CRC*/
58#define MAX_JUMBO_MTU 4072
59
60/* Max Tx Jumbo size 4086 bytes included 4 bytes CRC */
61#define MAX_TX_JUMBO_SIZE 4086
62
63/* Max Rx Jumbo size is 15K Bytes */
64#define MAX_RX_SIZE 0x3C00
65
66#define MARVELL_88E1111_PHYADDR 0x18
67#define MARVELL_88E1111_PHYIDR0 0x0141
68
69#define CICADA_CIS8201_PHYADDR 0x01
70#define CICADA_CIS8201_PHYIDR0 0x000F
71
72#define MEDIA_AUTO 0
73#define MEDIA_1000FULL 1
74#define MEDIA_1000HALF 2
75#define MEDIA_100FULL 3
76#define MEDIA_100HALF 4
77#define MEDIA_10FULL 5
78#define MEDIA_10HALF 6
79#define MEDIA_UNKNOWN 7
80
81#define AUTO_MEDIA 0
82#define FORCE_MEDIA 1
83
84#define TXDP_MASK 3
85#define TXDP0 0
86#define TXDP1 1
87#define TXDP2 2
88#define TXDP3 3
89
90#define CMD_MAP_SIZE 0x100
91
92#if defined (CONFIG_DRIVER_AX88180_16BIT)
93 #define AX88180_MEMORY_SIZE 0x00004000
94 #define START_BASE 0x1000
95
96 #define RX_BUF_SIZE 0x1000
97 #define TX_BUF_SIZE 0x0F00
98
99 #define TX_BASE START_BASE
100 #define CMD_BASE (TX_BASE + TX_BUF_SIZE)
101 #define RX_BASE (CMD_BASE + CMD_MAP_SIZE)
102#else
103 #define AX88180_MEMORY_SIZE 0x00010000
104
105 #define RX_BUF_SIZE 0x8000
106 #define TX_BUF_SIZE 0x7C00
107
108 #define RX_BASE 0x0000
109 #define TX_BASE (RX_BASE + RX_BUF_SIZE)
110 #define CMD_BASE (TX_BASE + TX_BUF_SIZE)
111#endif
112
113/* AX88180 Memory Mapping Definition */
114#define RXBUFFER_START RX_BASE
115 #define RX_PACKET_LEN_OFFSET 0
116 #define RX_PAGE_NUM_MASK 0x7FF /* RX pages 0~7FFh */
117#define TXBUFFER_START TX_BASE
118
119/* AX88180 MAC Register Definition */
120#define DECODE (0)
121 #define DECODE_EN 0x00000001
122#define BASE (6)
123#define CMD (CMD_BASE + 0x0000)
124 #define WAKEMOD 0x00000001
125 #define TXEN 0x00000100
126 #define RXEN 0x00000200
127 #define DEFAULT_CMD WAKEMOD
128#define IMR (CMD_BASE + 0x0004)
129 #define IMR_RXBUFFOVR 0x00000001
130 #define IMR_WATCHDOG 0x00000002
131 #define IMR_TX 0x00000008
132 #define IMR_RX 0x00000010
133 #define IMR_PHY 0x00000020
134 #define CLEAR_IMR 0x00000000
135 #define DEFAULT_IMR (IMR_PHY | IMR_RX | IMR_TX |\
136 IMR_RXBUFFOVR | IMR_WATCHDOG)
137#define ISR (CMD_BASE + 0x0008)
138 #define ISR_RXBUFFOVR 0x00000001
139 #define ISR_WATCHDOG 0x00000002
140 #define ISR_TX 0x00000008
141 #define ISR_RX 0x00000010
142 #define ISR_PHY 0x00000020
143#define TXCFG (CMD_BASE + 0x0010)
144 #define AUTOPAD_CRC 0x00000050
145 #define DEFAULT_TXCFG AUTOPAD_CRC
146#define TXCMD (CMD_BASE + 0x0014)
147 #define TXCMD_TXDP_MASK 0x00006000
148 #define TXCMD_TXDP0 0x00000000
149 #define TXCMD_TXDP1 0x00002000
150 #define TXCMD_TXDP2 0x00004000
151 #define TXCMD_TXDP3 0x00006000
152 #define TX_START_WRITE 0x00008000
153 #define TX_STOP_WRITE 0x00000000
154 #define DEFAULT_TXCMD 0x00000000
155#define TXBS (CMD_BASE + 0x0018)
156 #define TXDP0_USED 0x00000001
157 #define TXDP1_USED 0x00000002
158 #define TXDP2_USED 0x00000004
159 #define TXDP3_USED 0x00000008
160 #define DEFAULT_TXBS 0x00000000
161#define TXDES0 (CMD_BASE + 0x0020)
162 #define TXDPx_ENABLE 0x00008000
163 #define TXDPx_LEN_MASK 0x00001FFF
164 #define DEFAULT_TXDES0 0x00000000
165#define TXDES1 (CMD_BASE + 0x0024)
166 #define TXDPx_ENABLE 0x00008000
167 #define TXDPx_LEN_MASK 0x00001FFF
168 #define DEFAULT_TXDES1 0x00000000
169#define TXDES2 (CMD_BASE + 0x0028)
170 #define TXDPx_ENABLE 0x00008000
171 #define TXDPx_LEN_MASK 0x00001FFF
172 #define DEFAULT_TXDES2 0x00000000
173#define TXDES3 (CMD_BASE + 0x002C)
174 #define TXDPx_ENABLE 0x00008000
175 #define TXDPx_LEN_MASK 0x00001FFF
176 #define DEFAULT_TXDES3 0x00000000
177#define RXCFG (CMD_BASE + 0x0030)
178 #define RXBUFF_PROTECT 0x00000001
179 #define RXTCPCRC_CHECK 0x00000010
180 #define RXFLOW_ENABLE 0x00000100
181 #define DEFAULT_RXCFG RXBUFF_PROTECT
182#define RXCURT (CMD_BASE + 0x0034)
183 #define DEFAULT_RXCURT 0x00000000
184#define RXBOUND (CMD_BASE + 0x0038)
185 #define DEFAULT_RXBOUND 0x7FF //RX pages 0~7FFh
186#define MACCFG0 (CMD_BASE + 0x0040)
187 #define MACCFG0_BIT3_0 0x00000007
188 #define IPGT_VAL 0x00000150
189 #define TXFLOW_ENABLE 0x00001000
190 #define SPEED100 0x00008000
191 #define DEFAULT_MACCFG0 (IPGT_VAL | MACCFG0_BIT3_0)
192#define MACCFG1 (CMD_BASE + 0x0044)
193 #define RGMII_EN 0x00000002
194 #define RXFLOW_EN 0x00000020
195 #define FULLDUPLEX 0x00000040
196 #define MAX_JUMBO_LEN 0x00000780
197 #define RXJUMBO_EN 0x00000800
198 #define GIGA_MODE_EN 0x00001000
199 #define RXCRC_CHECK 0x00002000
200 #define RXPAUSE_DA_CHECK 0x00004000
201
202 #define JUMBO_LEN_4K 0x00000200
203 #define JUMBO_LEN_15K 0x00000780
204 #define DEFAULT_MACCFG1 (RXCRC_CHECK | RXPAUSE_DA_CHECK | \
205 RGMII_EN)
206 #define CICADA_DEFAULT_MACCFG1 (RXCRC_CHECK | RXPAUSE_DA_CHECK)
207#define MACCFG2 (CMD_BASE + 0x0048)
208 #define MACCFG2_BIT15_8 0x00000100
209 #define JAM_LIMIT_MASK 0x000000FC
210 #define DEFAULT_JAM_LIMIT 0x00000064
211 #define DEFAULT_MACCFG2 MACCFG2_BIT15_8
212#define MACCFG3 (CMD_BASE + 0x004C)
213 #define IPGR2_VAL 0x0000000E
214 #define IPGR1_VAL 0x00000600
215 #define NOABORT 0x00008000
216 #define DEFAULT_MACCFG3 (IPGR1_VAL | IPGR2_VAL)
217#define TXPAUT (CMD_BASE + 0x0054)
218 #define DEFAULT_TXPAUT 0x001FE000
219#define RXBTHD0 (CMD_BASE + 0x0058)
220 #define DEFAULT_RXBTHD0 0x00000300
221#define RXBTHD1 (CMD_BASE + 0x005C)
222 #define DEFAULT_RXBTHD1 0x00000600
223#define RXFULTHD (CMD_BASE + 0x0060)
224 #define DEFAULT_RXFULTHD 0x00000100
225#define MISC (CMD_BASE + 0x0068)
226 /* Normal operation mode */
227 #define MISC_NORMAL 0x00000003
228 /* Clear bit 0 to reset MAC */
229 #define MISC_RESET_MAC 0x00000002
230 /* Clear bit 1 to reset PHY */
231 #define MISC_RESET_PHY 0x00000001
232 /* Clear bit 0 and 1 to reset MAC and PHY */
233 #define MISC_RESET_MAC_PHY 0x00000000
234 #define DEFAULT_MISC MISC_NORMAL
235#define MACID0 (CMD_BASE + 0x0070)
236#define MACID1 (CMD_BASE + 0x0074)
237#define MACID2 (CMD_BASE + 0x0078)
238#define TXLEN (CMD_BASE + 0x007C)
239 #define DEFAULT_TXLEN 0x000005FC
240#define RXFILTER (CMD_BASE + 0x0080)
241 #define RX_RXANY 0x00000001
242 #define RX_MULTICAST 0x00000002
243 #define RX_UNICAST 0x00000004
244 #define RX_BROADCAST 0x00000008
245 #define RX_MULTI_HASH 0x00000010
246 #define DISABLE_RXFILTER 0x00000000
247 #define DEFAULT_RXFILTER (RX_BROADCAST + RX_UNICAST)
248#define MDIOCTRL (CMD_BASE + 0x0084)
249 #define PHY_ADDR_MASK 0x0000001F
250 #define REG_ADDR_MASK 0x00001F00
251 #define READ_PHY 0x00004000
252 #define WRITE_PHY 0x00008000
253#define MDIODP (CMD_BASE + 0x0088)
254#define GPIOCTRL (CMD_BASE + 0x008C)
255#define RXINDICATOR (CMD_BASE + 0x0090)
256 #define RX_START_READ 0x00000001
257 #define RX_STOP_READ 0x00000000
258 #define DEFAULT_RXINDICATOR RX_STOP_READ
259#define TXST (CMD_BASE + 0x0094)
260#define MDCCLKPAT (CMD_BASE + 0x00A0)
261#define RXIPCRCCNT (CMD_BASE + 0x00A4)
262#define RXCRCCNT (CMD_BASE + 0x00A8)
263#define TXFAILCNT (CMD_BASE + 0x00AC)
264#define PROMDP (CMD_BASE + 0x00B0)
265#define PROMCTRL (CMD_BASE + 0x00B4)
266 #define RELOAD_EEPROM 0x00000200
267#define MAXRXLEN (CMD_BASE + 0x00B8)
268#define HASHTAB0 (CMD_BASE + 0x00C0)
269#define HASHTAB1 (CMD_BASE + 0x00C4)
270#define HASHTAB2 (CMD_BASE + 0x00C8)
271#define HASHTAB3 (CMD_BASE + 0x00CC)
272#define DOGTHD0 (CMD_BASE + 0x00E0)
273 #define DEFAULT_DOGTHD0 0x0000FFFF
274#define DOGTHD1 (CMD_BASE + 0x00E4)
275 #define START_WATCHDOG_TIMER 0x00008000
276 #define DEFAULT_DOGTHD1 0x00000FFF
277#define SOFTRST (CMD_BASE + 0x00EC)
278 #define SOFTRST_NORMAL 0x00000003
279 #define SOFTRST_RESET_MAC 0x00000002
280
281/* External PHY Register Definition */
282#define BMCR 0x0000
283 #define LINE_SPEED_MSB 0x0040
284 #define DUPLEX_MODE 0x0100
285 #define RESTART_AUTONEG 0x0200
286 #define POWER_DOWN 0x0800
287 #define AUTONEG_EN 0x1000
288 #define LINE_SPEED_LSB 0x2000
289 #define PHY_RESET 0x8000
290
291 #define MEDIAMODE_MASK (LINE_SPEED_MSB | LINE_SPEED_LSB |\
292 DUPLEX_MODE)
293 #define BMCR_SPEED_1000 LINE_SPEED_MSB
294 #define BMCR_SPEED_100 LINE_SPEED_LSB
295 #define BMCR_SPEED_10 0x0000
296
297 #define BMCR_1000FULL (BMCR_SPEED_1000 | DUPLEX_MODE)
298 #define BMCR_100FULL (BMCR_SPEED_100 | DUPLEX_MODE)
299 #define BMCR_100HALF BMCR_SPEED_100
300 #define BMCR_10FULL DUPLEX_MODE
301 #define BMCR_10HALF 0x0000
302#define BMSR 0x0001
303 #define LINKOK 0x0004
304 #define AUTONEG_ENABLE_STS 0x0008
305 #define AUTONEG_COMPLETE 0x0020
306#define PHYIDR0 0x0002
307#define PHYIDR1 0x0003
308#define ANAR 0x0004
309 #define ANAR_PAUSE 0x0400
310 #define ANAR_100FULL 0x0100
311 #define ANAR_100HALF 0x0080
312 #define ANAR_10FULL 0x0040
313 #define ANAR_10HALF 0x0020
314 #define ANAR_8023BIT 0x0001
315#define ANLPAR 0x0005
316#define ANER 0x0006
317#define AUX_1000_CTRL 0x0009
318 #define ENABLE_1000HALF 0x0100
319 #define ENABLE_1000FULL 0x0200
320 #define DEFAULT_AUX_1000_CTRL (ENABLE_1000HALF | ENABLE_1000FULL)
321#define AUX_1000_STATUS 0x000A
322 #define LP_1000HALF 0x0400
323 #define LP_1000FULL 0x0800
324
325/* Marvell 88E1111 Gigabit PHY Register Definition */
326#define M88_SSR 0x0011
327 #define SSR_SPEED_MASK 0xC000
328 #define SSR_SPEED_1000 0x8000
329 #define SSR_SPEED_100 0x4000
330 #define SSR_SPEED_10 0x0000
331 #define SSR_DUPLEX 0x2000
332 #define SSR_MEDIA_RESOLVED_OK 0x0800
333
334 #define SSR_MEDIA_MASK (SSR_SPEED_MASK | SSR_DUPLEX)
335 #define SSR_1000FULL (SSR_SPEED_1000 | SSR_DUPLEX)
336 #define SSR_1000HALF SSR_SPEED_1000
337 #define SSR_100FULL (SSR_SPEED_100 | SSR_DUPLEX)
338 #define SSR_100HALF SSR_SPEED_100
339 #define SSR_10FULL (SSR_SPEED_10 | SSR_DUPLEX)
340 #define SSR_10HALF SSR_SPEED_10
341#define M88_IER 0x0012
342 #define LINK_CHANGE_INT 0x0400
343#define M88_ISR 0x0013
344 #define LINK_CHANGE_STATUS 0x0400
345#define M88_EXT_SCR 0x0014
346 #define RGMII_RXCLK_DELAY 0x0080
347 #define RGMII_TXCLK_DELAY 0x0002
348 #define DEFAULT_EXT_SCR (RGMII_TXCLK_DELAY | RGMII_RXCLK_DELAY)
349#define M88_EXT_SSR 0x001B
350 #define HWCFG_MODE_MASK 0x000F
351 #define RGMII_COPPER_MODE 0x000B
352
353/* CICADA CIS8201 Gigabit PHY Register Definition */
354#define CIS_IMR 0x0019
355 #define CIS_INT_ENABLE 0x8000
356 #define CIS_LINK_CHANGE_INT 0x2000
357#define CIS_ISR 0x001A
358 #define CIS_INT_PENDING 0x8000
359 #define CIS_LINK_CHANGE_STATUS 0x2000
360#define CIS_AUX_CTRL_STATUS 0x001C
361 #define CIS_AUTONEG_COMPLETE 0x8000
362 #define CIS_SPEED_MASK 0x0018
363 #define CIS_SPEED_1000 0x0010
364 #define CIS_SPEED_100 0x0008
365 #define CIS_SPEED_10 0x0000
366 #define CIS_DUPLEX 0x0020
367
368 #define CIS_MEDIA_MASK (CIS_SPEED_MASK | CIS_DUPLEX)
369 #define CIS_1000FULL (CIS_SPEED_1000 | CIS_DUPLEX)
370 #define CIS_1000HALF CIS_SPEED_1000
371 #define CIS_100FULL (CIS_SPEED_100 | CIS_DUPLEX)
372 #define CIS_100HALF CIS_SPEED_100
373 #define CIS_10FULL (CIS_SPEED_10 | CIS_DUPLEX)
374 #define CIS_10HALF CIS_SPEED_10
375 #define CIS_SMI_PRIORITY 0x0004
376
377static inline unsigned short INW (struct eth_device *dev, unsigned long addr)
378{
379 return le16_to_cpu (*(volatile unsigned short *) (addr + dev->iobase));
380}
381
382static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr)
383{
384 *(volatile unsigned short *) ((addr + dev->iobase)) = cpu_to_le16 (command);
385}
386
387/*
388 Access RXBUFFER_START/TXBUFFER_START to read RX buffer/write TX buffer
389*/
390#if defined (CONFIG_DRIVER_AX88180_16BIT)
391static inline unsigned short READ_RXBUF (struct eth_device *dev)
392{
393 return le16_to_cpu (*(volatile unsigned short *) (RXBUFFER_START + dev->iobase));
394}
395
396static inline void WRITE_TXBUF (struct eth_device *dev, unsigned short data)
397{
398 *(volatile unsigned short *) ((TXBUFFER_START + dev->iobase)) = cpu_to_le16 (data);
399}
400#else
401static inline unsigned long READ_RXBUF (struct eth_device *dev)
402{
403 return le32_to_cpu (*(volatile unsigned long *) (RXBUFFER_START + dev->iobase));
404}
405
406static inline void WRITE_TXBUF (struct eth_device *dev, unsigned long data)
407{
408 *(volatile unsigned long *) ((TXBUFFER_START + dev->iobase)) = cpu_to_le32 (data);
409}
410#endif
411
412#endif /* _AX88180_H_ */