blob: ae7b2434c337c14202907c2b44ab4ca0a1ca6f16 [file] [log] [blame]
Wolfgang Denkba94a1b2006-05-30 15:56:48 +02001
2/**
3 * @file IxAtmdAcc.h
4 *
5 * @date 07-Nov-2001
6 *
7 * @brief IxAtmdAcc Public API
8 *
9 * This file contains the public API of IxAtmdAcc, related to the
10 * data functions of the component
11 *
12 *
13 * @par
14 * IXP400 SW Release version 2.0
15 *
16 * -- Copyright Notice --
17 *
18 * @par
19 * Copyright 2001-2005, Intel Corporation.
20 * All rights reserved.
21 *
22 * @par
23 * Redistribution and use in source and binary forms, with or without
24 * modification, are permitted provided that the following conditions
25 * are met:
26 * 1. Redistributions of source code must retain the above copyright
27 * notice, this list of conditions and the following disclaimer.
28 * 2. Redistributions in binary form must reproduce the above copyright
29 * notice, this list of conditions and the following disclaimer in the
30 * documentation and/or other materials provided with the distribution.
31 * 3. Neither the name of the Intel Corporation nor the names of its contributors
32 * may be used to endorse or promote products derived from this software
33 * without specific prior written permission.
34 *
35 * @par
36 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
37 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
38 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
39 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
40 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
41 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
42 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
43 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
44 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
45 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
46 * SUCH DAMAGE.
47 *
48 * @par
49 * -- End of Copyright Notice --
50 */
51
52/* ------------------------------------------------------
53 Doxygen group definitions
54 ------------------------------------------------------ */
55
56/**
57 *
58 * @defgroup IxAtmdAccAPI IXP400 ATM Driver Access (IxAtmdAcc) API
59 *
60 * @brief The public API for the IXP400 Atm Driver Data component
61 *
62 * IxAtmdAcc is the low level interface by which AAL0/AAL5 and
63 * OAM data gets transmitted to,and received from the Utopia bus.
64 *
65 * For AAL0/AAL5 services transmit and receive connections may
66 * be established independantly for unique combinations of
67 * port,VPI,and VCI.
68 *
69 * Two AAL0 services supporting 48 or 52 byte cell data are provided.
70 * Submitted AAL0 PDUs must be a multiple of the cell data size (48/52).
71 * AAL0_52 is a raw cell service the client must format
72 * the PDU with an ATM cell header (excluding HEC) at the start of
73 * each cell, note that AtmdAcc does not validate the cell headers in
74 * a submitted PDU.
75 *
76 * OAM cells cannot be received over the AAL0 service but instead
77 * are received over a dedicated OAM service.
78 *
79 * For the OAM service an "OAM Tx channel" may be enabled for a port
80 * by establishing a single dedicated OAM Tx connection on that port.
81 * A single "OAM Rx channel" for all ports may be enabled by
82 * establishing a dedicated OAM Rx connection.
83 *
84 * The OAM service allows buffers containing 52 byte OAM F4/F5 cells
85 * to be transmitted and received over the dedicated OAM channels.
86 * HEC is appended/removed, and CRC-10 performed by the NPE. The OAM
87 * service offered by AtmdAcc is a raw cell transport service.
88 * It is assumed that ITU I.610 procedures that make use of this
89 * service are implemented above AtmdAcc.
90 *
91 * Note that the dedicated OAM connections are established on
92 * reserved VPI,VCI, and (in the case of Rx) port values defined below.
93 * These values are used purely to descriminate the dedicated OAM channels
94 * and do not identify a particular OAM F4/F5 flow. F4/F5 flows may be
95 * realised for particluar VPI/VCIs by manipulating the VPI,VCI
96 * fields of the ATM cell headers of cells in the buffers passed
97 * to AtmdAcc. Note that AtmdAcc does not validate the cell headers
98 * in a submitted OAM PDU.
99 *
100 *
101 *
102 * This part is related to the User datapath processing
103 *
104 * @{
105 */
106
107#ifndef IXATMDACC_H
108#define IXATMDACC_H
109
110#include "IxAtmTypes.h"
111
112/* ------------------------------------------------------
113 AtmdAcc Data Types definition
114 ------------------------------------------------------ */
115
116/**
117 *
118 * @ingroup IxAtmdAccAPI
119 *
120 * @def IX_ATMDACC_WARNING
121 *
122 * @brief Warning return code
123 *
124 * This constant is used to tell IxAtmDAcc user about a special case.
125 *
126 */
127#define IX_ATMDACC_WARNING 2
128
129/**
130 *
131 * @ingroup IxAtmdAccAPI
132 *
133 * @def IX_ATMDACC_BUSY
134 *
135 * @brief Busy return code
136 *
137 * This constant is used to tell IxAtmDAcc user that the request
138 * is correct, but cannot be processed because the IxAtmAcc resources
139 * are already used. The user has to retry its request later
140 *
141 */
142#define IX_ATMDACC_BUSY 3
143
144/**
145 *
146 * @ingroup IxAtmdAccAPI
147 *
148 * @def IX_ATMDACC_RESOURCES_STILL_ALLOCATED
149 *
150 * @brief Disconnect return code
151 *
152 * This constant is used to tell IxAtmDAcc user that the disconnect
153 * functions are not complete because the resources used by the driver
154 * are not yet released. The user has to retry the disconnect call
155 * later.
156 *
157 */
158#define IX_ATMDACC_RESOURCES_STILL_ALLOCATED 4
159
160/**
161 *
162 * @ingroup IxAtmdAccAPI
163 *
164 * @def IX_ATMDACC_DEFAULT_REPLENISH_COUNT
165 *
166 * @brief Default resources usage for RxVcFree replenish mechanism
167 *
168 * This constant is used to tell IxAtmDAcc to allocate and use
169 * the minimum of resources for rx free replenish.
170 *
171 * @sa ixAtmdAccRxVcConnect
172 */
173#define IX_ATMDACC_DEFAULT_REPLENISH_COUNT 0
174
175
176/**
177 * @ingroup IxAtmdAccAPI
178 *
179 * @def IX_ATMDACC_OAM_TX_VPI
180 *
181 * @brief The reserved value used for the dedicated OAM
182 * Tx connection. This "well known" value is used by atmdAcc and
183 * its clients to dsicriminate the OAM channel, and should be chosen so
184 * that it does not coencide with the VPI value used in an AAL0/AAL5 connection.
185 * Any attempt to connect a service type other than OAM on this VPI will fail.
186 *
187 *
188 */
189#define IX_ATMDACC_OAM_TX_VPI 0
190
191/**
192 * @ingroup IxAtmdAccAPI
193 *
194 * @def IX_ATMDACC_OAM_TX_VCI
195 *
196 * @brief The reserved value used for the dedicated OAM
197 * Tx connection. This "well known" value is used by atmdAcc and
198 * its clients to dsicriminate the OAM channel, and should be chosen so
199 * that it does not coencide with the VCI value used in an AAL0/AAL5 connection.
200 * Any attempt to connect a service type other than OAM on this VCI will fail.
201 */
202#define IX_ATMDACC_OAM_TX_VCI 0
203
204
205 /**
206 * @ingroup IxAtmdAccAPI
207 *
208 * @def IX_ATMDACC_OAM_RX_PORT
209 *
210 * @brief The reserved dummy PORT used for all dedicated OAM
211 * Rx connections. Note that this is not a real port but must
212 * have a value that lies within the valid range of port values.
213 */
214#define IX_ATMDACC_OAM_RX_PORT IX_UTOPIA_PORT_0
215
216 /**
217 * @ingroup IxAtmdAccAPI
218 *
219 * @def IX_ATMDACC_OAM_RX_VPI
220 *
221 * @brief The reserved value value used for the dedicated OAM
222 * Rx connection. This value should be chosen so that it does not
223 * coencide with the VPI value used in an AAL0/AAL5 connection.
224 * Any attempt to connect a service type other than OAM on this VPI will fail.
225 */
226#define IX_ATMDACC_OAM_RX_VPI 0
227
228/**
229 * @ingroup IxAtmdAccAPI
230 *
231 * @def IX_ATMDACC_OAM_RX_VCI
232 *
233 * @brief The reserved value value used for the dedicated OAM
234 * Rx connection. This value should be chosen so that it does not
235 * coencide with the VCI value used in an AAL0/AAL5 connection.
236 * Any attempt to connect a service type other than OAM on this VCI will fail.
237 */
238#define IX_ATMDACC_OAM_RX_VCI 0
239
240
241/**
242 * @enum IxAtmdAccPduStatus
243 *
244 * @ingroup IxAtmdAccAPI
245 *
246 * @brief IxAtmdAcc Pdu status :
247 *
248 * IxAtmdAccPduStatus is used during a RX operation to indicate
249 * the status of the received PDU
250 *
251 */
252
253typedef enum
254{
255 IX_ATMDACC_AAL0_VALID = 0, /**< aal0 pdu */
256 IX_ATMDACC_OAM_VALID, /**< OAM pdu */
257 IX_ATMDACC_AAL2_VALID, /**< aal2 pdu @b reserved for future use */
258 IX_ATMDACC_AAL5_VALID, /**< aal5 pdu complete and trailer is valid */
259 IX_ATMDACC_AAL5_PARTIAL, /**< aal5 pdu not complete, trailer is missing */
260 IX_ATMDACC_AAL5_CRC_ERROR, /**< aal5 pdu not complete, crc error/length error */
261 IX_ATMDACC_MBUF_RETURN /**< empty buffer returned to the user */
262} IxAtmdAccPduStatus;
263
264
265/**
266 *
267 * @enum IxAtmdAccAalType
268 *
269 * @ingroup IxAtmdAccAPI
270 *
271 * @brief IxAtmdAcc AAL Service Type :
272 *
273 * IxAtmdAccAalType defines the type of traffic to run on this VC
274 *
275 */
276typedef enum
277{
278 IX_ATMDACC_AAL5, /**< ITU-T AAL5 */
279 IX_ATMDACC_AAL2, /**< ITU-T AAL2 @b reserved for future use */
280 IX_ATMDACC_AAL0_48, /**< AAL0 48 byte payloads (cell header is added by NPE)*/
281 IX_ATMDACC_AAL0_52, /**< AAL0 52 byte cell data (HEC is added by NPE) */
282 IX_ATMDACC_OAM, /**< OAM cell transport service (HEC is added by NPE)*/
283 IX_ATMDACC_MAX_SERVICE_TYPE /**< not a service, used for parameter validation */
284} IxAtmdAccAalType;
285
286/**
287 *
288 * @enum IxAtmdAccClpStatus
289 *
290 * @ingroup IxAtmdAccAPI
291 *
292 * @brief IxAtmdAcc CLP indication
293 *
294 * IxAtmdAccClpStatus defines the CLP status of the current PDU
295 *
296 */
297typedef enum
298{
299 IX_ATMDACC_CLP_NOT_SET = 0, /**< CLP indication is not set */
300 IX_ATMDACC_CLP_SET = 1 /**< CLP indication is set */
301} IxAtmdAccClpStatus;
302
303/**
304 * @typedef IxAtmdAccUserId
305 *
306 * @ingroup IxAtmdAccAPI
307 *
308 * @brief User-supplied Id
309 *
310 * IxAtmdAccUserId is passed through callbacks and allows the
311 * IxAtmdAcc user to identify the source of a call back. The range of
312 * this user-owned Id is [0...2^32-1)].
313 *
314 * The user provides this own Ids on a per-channel basis as a parameter
315 * in a call to @a ixAtmdAccRxVcConnect() or @a ixAtmdAccRxVcConnect()
316 *
317 * @sa ixAtmdAccRxVcConnect
318 * @sa ixAtmdAccTxVcConnect
319 *
320 */
321typedef unsigned int IxAtmdAccUserId;
322
323/* ------------------------------------------------------
324 Part of the IxAtmdAcc interface related to RX traffic
325 ------------------------------------------------------ */
326
327/**
328 *
329 * @ingroup IxAtmdAccAPI
330 *
331 * @brief Rx callback prototype
332 *
333 * IxAtmdAccRxVcRxCallback is the prototype of the Rx callback user
334 * function called once per PDU to pass a receive Pdu to a user on a
335 * partilcular connection. The callback is likely to push the mbufs
336 * to a protocol layer, and recycle the mbufs for a further use.
337 *
338 * @note -This function is called ONLY in the context of
339 * the @a ixAtmdAccRxDispatch() function
340 *
341 * @sa ixAtmdAccRxDispatch
342 * @sa ixAtmdAccRxVcConnect
343 *
344 * @param port @ref IxAtmLogicalPort [in] - the port on which this PDU was received
345 * a logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
346 * @param userId @ref IxAtmdAccUserId [in] - user Id provided in the call
347 * to @a ixAtmdAccRxVcConnect()
348 * @param status @ref IxAtmdAccPduStatus [in] - an indication about the PDU validity.
349 * In the case of AAL0 the only possibile value is
350 * AAL0_VALID, in this case the client may optionally determine
351 * that an rx timeout occured by checking if the mbuf is
352 * compleletly or only partially filled, the later case
353 * indicating a timeout.
354 * In the case of OAM the only possible value is OAM valid.
355 * The status is set to @a IX_ATMDACC_MBUF_RETURN when
356 * the mbuf is released during a disconnect process.
357 * @param clp @ref IxAtmdAccClpStatus [in] - clp indication for this PDU.
358 * For AAL5/AAL0_48 this information
359 * is set if the clp bit of any rx cell is set
360 * For AAL0-52/OAM the client may inspect the CLP in individual
361 * cell headers in the PDU, and this parameter is set to 0.
362 * @param *mbufPtr @ref IX_OSAL_MBUF [in] - depending on the servive type a pointer to
363 * an mbuf (AAL5/AAL0/OAM) or mbuf chain (AAL5 only),
364 * that comprises the complete PDU data.
365 *
366 * This parameter is guaranteed not to be a null pointer.
367 *
368 */
369typedef void (*IxAtmdAccRxVcRxCallback) (IxAtmLogicalPort port,
370 IxAtmdAccUserId userId,
371 IxAtmdAccPduStatus status,
372 IxAtmdAccClpStatus clp,
373 IX_OSAL_MBUF * mbufPtr);
374
375/**
376 *
377 * @ingroup IxAtmdAccAPI
378 *
379 * @brief Callback prototype for free buffer level is low.
380 *
381 * IxAtmdAccRxVcFreeLowCallback is the prototype of the user function
382 * which get called on a per-VC basis, when more mbufs are needed to
383 * continue the ATM data reception. This function is likely to supply
384 * more available mbufs by one or many calls to the replenish function
385 * @a ixAtmdAccRxVcFreeReplenish()
386 *
387 * This function is called when the number of available buffers for
388 * reception is going under the threshold level as defined
389 * in @a ixAtmdAccRxVcFreeLowCallbackRegister()
390 *
391 * This function is called inside an Qmgr dispatch context. No system
392 * resource or interrupt-unsafe feature should be used inside this
393 * callback.
394 *
395 * @sa ixAtmdAccRxVcFreeLowCallbackRegister
396 * @sa IxAtmdAccRxVcFreeLowCallback
397 * @sa ixAtmdAccRxVcFreeReplenish
398 * @sa ixAtmdAccRxVcFreeEntriesQuery
399 * @sa ixAtmdAccRxVcConnect
400 *
401 * @param userId @ref IxAtmdAccUserId [in] - user Id provided in the call
402 * to @a ixAtmdAccRxVcConnect()
403 *
404 * @return None
405 *
406 */
407typedef void (*IxAtmdAccRxVcFreeLowCallback) (IxAtmdAccUserId userId);
408
409/* ------------------------------------------------------
410 Part of the IxAtmdAcc interface related to TX traffic
411 ------------------------------------------------------ */
412
413/**
414 *
415 * @ingroup IxAtmdAccAPI
416 *
417 * @brief Buffer callback prototype.
418 *
419 * This function is called to relinguish ownership of a transmitted
420 * buffer chain to the user.
421 *
422 * @note -In the case of a chained mbuf the AmtdAcc component can
423 * chain many user buffers together and pass ownership to the user in
424 * one function call.
425 *
426 * @param userId @ref IxAtmdAccUserId [in] - user If provided at registration of this
427 * callback.
428 * @param mbufPtr @ref IX_OSAL_MBUF [in] - a pointer to mbufs or chain of mbufs and is
429 * guaranteed not to be a null pointer.
430 *
431 */
432typedef void (*IxAtmdAccTxVcBufferReturnCallback) (IxAtmdAccUserId userId,
433 IX_OSAL_MBUF * mbufPtr);
434
435/* ------------------------------------------------------
436 Part of the IxAtmdAcc interface related to Initialisation
437 ------------------------------------------------------ */
438
439/**
440 *
441 * @ingroup IxAtmdAccAPI
442 *
443 * @fn ixAtmdAccInit (void)
444 *
445 * @brief Initialise the IxAtmdAcc Component
446 *
447 * This function initialise the IxAtmdAcc component. This function shall
448 * be called before any other function of the API. Its role is to
449 * initialise all internal resources of the IxAtmdAcc component.
450 *
451 * The ixQmgr component needs to be initialized prior the use of
452 * @a ixAtmdAccInit()
453 *
454 * @param none
455 *
456 * Failing to initilialize the IxAtmdAcc API before any use of it will
457 * result in a failed status.
458 * If the specified component is not present, a success status will still be
459 * returned, however, a warning indicating the NPE to download to is not
460 * present will be issued.
461 *
462 * @return @li IX_SUCCESS initialisation is complete (in case of component not
463 * being present, a warning is clearly indicated)
464 * @return @li IX_FAIL unable to process this request either
465 * because this IxAtmdAcc is already initialised
466 * or some unspecified error has occrred.
467 */
468PUBLIC IX_STATUS ixAtmdAccInit (void);
469
470/**
471 *
472 * @ingroup IxAtmdAccAPI
473 *
474 * @fn ixAtmdAccShow (void)
475 *
476 * @brief Show IxAtmdAcc configuration on a per port basis
477 *
478 * @param none
479 *
480 * @return none
481 *
482 * @note - Display use printf() and are redirected to stdout
483 */
484PUBLIC void
485ixAtmdAccShow (void);
486
487/**
488 *
489 * @ingroup IxAtmdAccAPI
490 *
491 * @fn ixAtmdAccStatsShow (void)
492 *
493 * @brief Show all IxAtmdAcc stats
494 *
495 * @param none
496 *
497 * @return none
498 *
499 * @note - Stats display use printf() and are redirected to stdout
500 */
501PUBLIC void
502ixAtmdAccStatsShow (void);
503
504/**
505 *
506 * @ingroup IxAtmdAccAPI
507 *
508 * @fn ixAtmdAccStatsReset (void)
509 *
510 * @brief Reset all IxAtmdAcc stats
511 *
512 * @param none
513 *
514 * @return none
515 *
516 */
517PUBLIC void
518ixAtmdAccStatsReset (void);
519
520/* ------------------------------------------------------
521 Part of the IxAtmdAcc interface related to RX traffic
522 ------------------------------------------------------ */
523
524/**
525 *
526 * @ingroup IxAtmdAccAPI
527 *
528 * @fn ixAtmdAccRxVcConnect (IxAtmLogicalPort port,
529 unsigned int vpi,
530 unsigned int vci,
531 IxAtmdAccAalType aalServiceType,
532 IxAtmRxQueueId rxQueueId,
533 IxAtmdAccUserId userCallbackId,
534 IxAtmdAccRxVcRxCallback rxCallback,
535 unsigned int minimumReplenishCount,
536 IxAtmConnId * connIdPtr,
537 IxAtmNpeRxVcId * npeVcIdPtr )
538 *
539 * @brief Connect to a Aal Pdu receive service for a particular
540 * port/vpi/vci, and service type.
541 *
542 * This function allows a user to connect to an Aal5/Aal0/OAM Pdu receive service
543 * for a particular port/vpi/vci. It registers the callback and allocates
544 * internal resources and a Connection Id to be used in further API calls
545 * related to this VCC.
546 *
547 * The function will setup VC receive service on the specified rx queue.
548 *
549 * This function is blocking and makes use internal locks, and hence
550 * should not be called from an interrupt context.
551 *
552 * On return from @a ixAtmdAccRxVcConnect() with a failure status, the
553 * connection Id parameter is unspecified. Its value cannot be used.
554 * A connId is the reference by which IxAtmdAcc refers to a
555 * connected VC. This identifier is the result of a succesful call
556 * to a connect function. This identifier is invalid after a
557 * sucessful call to a disconnect function.
558 *
559 * Calling this function for the same combination of Vpi, Vci and more
560 * than once without calling @a ixAtmdAccRxVcTryDisconnect() will result in a
561 * failure status.
562 *
563 * If this function returns success the user should supply receive
564 * buffers by calling @a ixAtmdAccRxVcFreeReplenish() and then call
565 * @a ixAtmdAccRxVcEnable() to begin receiving pdus.
566 *
567 * There is a choice of two receive Qs on which the VC pdus could be
568 * receive. The user must associate the VC with one of these. Essentially
569 * having two qs allows more flexible system configuration such as have
570 * high prioriy traffic on one q (e.g. voice) and low priority traffic on
571 * the other (e.g. data). The high priority Q could be serviced in
572 * preference to the low priority Q. One queue may be configured to be
573 * serviced as soon as there is traffic, the other queue may be configured
574 * to be serviced by a polling mechanism running at idle time.
575 *
576 * Two AAL0 services supporting 48 or 52 byte cell data are provided.
577 * Received AAL0 PDUs will be be a multiple of the cell data size (48/52).
578 * AAL0_52 is a raw cell service and includes an ATM cell header
579 * (excluding HEC) at the start of each cell.
580 *
581 * A single "OAM Rx channel" for all ports may be enabled by
582 * establishing a dedicated OAM Rx connection.
583 *
584 * The OAM service allows buffers containing 52 byte OAM F4/F5 cells
585 * to be transmitted and received over the dedicated OAM channels.
586 * HEC is appended/removed, and CRC-10 performed by the NPE. The OAM
587 * service offered by AtmdAcc is a raw cell transport service.
588 * It is assumed that ITU I.610 procedures that make use of this
589 * service are implemented above AtmdAcc.
590 *
591 * Note that the dedicated OAM connections are established on
592 * reserved VPI,VCI, and (in the case of Rx) port values.
593 * These values are used purely to descriminate the dedicated OAM channels
594 * and do not identify a particular OAM F4/F5 flow. F4/F5 flows may be
595 * realised for particluar VPI/VCIs by manipulating the VPI,VCI
596 * fields of the ATM cell headers of cells in the buffers passed
597 * to AtmdAcc.
598 *
599 * Calling this function prior to enable the port will fail.
600 *
601 * @sa ixAtmdAccRxDispatch
602 * @sa ixAtmdAccRxVcEnable
603 * @sa ixAtmdAccRxVcDisable
604 * @sa ixAtmdAccRxVcTryDisconnect
605 * @sa ixAtmdAccPortEnable
606 *
607 * @param port @ref IxAtmLogicalPort [in] - VC identification : logical PHY port
608 * [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
609 * @param vpi unsigned int [in] - VC identification : ATM Vpi [0..255] or IX_ATMDACC_OAM_VPI
610 * @param vci unsigned int [in] - VC identification : ATM Vci [0..65535] or IX_ATMDACC_OAM_VCI
611 * @param aalServiceType @ref IxAtmdAccAalType [in] - type of service: AAL5, AAL0_48, AAL0_52, or OAM
612 * @param rxQueueId @ref IxAtmRxQueueId [in] - this identifieds which of two Qs the VC
613 * should use.when icoming traffic is processed
614 * @param userCallbackId @ref IxAtmdAccUserId [in] - user Id used later as a parameter to
615 * the supplied rxCallback.
616 * @param rxCallback [in] @ref IxAtmdAccRxVxRxCallback - function called when mbufs are received.
617 * This parameter cannot be a null pointer.
618 * @param bufferFreeCallback [in] - function to be called to return
619 * ownership of buffers to IxAtmdAcc user.
620 * @param minimumReplenishCount unsigned int [in] - For AAL5/AAL0 the number of free mbufs
621 * to be used with this channel. Use a high number when the expected traffic
622 * rate on this channel is high, or when the user's mbufs are small, or when
623 * the RxVcFreeLow Notification has to be invoked less often. When this
624 * value is IX_ATMDACC_DEFAULT_REPLENISH_COUNT, the minimum of
625 * resources will be used. Depending on traffic rate, pdu
626 * size and mbuf size, rxfree queue size, polling/interrupt rate, this value may
627 * require to be replaced by a different value in the range 1-128
628 * For OAM the rxFree queue size is fixed by atmdAcc and this parameter is ignored.
629 * @param connIdPtr @ref IxAtmConnId [out] - pointer to a connection Id
630 * This parameter cannot be a null pointer.
631 * @param npeVcIdPtr @ref IxAtmNpeRxVcId [out] - pointer to an npe Vc Id
632 * This parameter cannot be a null pointer.
633 *
634 * @return @li IX_SUCCESS successful call to IxAtmdAccRxVcConnect
635 * @return @li IX_ATMDACC_BUSY cannot process this request :
636 * no VC is available
637 * @return @li IX_FAIL
638 * parameter error,
639 * VC already in use,
640 * attempt to connect AAL service on reserved OAM VPI/VCI,
641 * attempt to connect OAM service on VPI/VCI other than the reserved OAM VPI/VCI,
642 * port is not initialised,
643 * or some other error occurs during processing.
644 *
645 */
646PUBLIC IX_STATUS ixAtmdAccRxVcConnect (IxAtmLogicalPort port,
647 unsigned int vpi,
648 unsigned int vci,
649 IxAtmdAccAalType aalServiceType,
650 IxAtmRxQueueId rxQueueId,
651 IxAtmdAccUserId userCallbackId,
652 IxAtmdAccRxVcRxCallback rxCallback,
653 unsigned int minimumReplenishCount,
654 IxAtmConnId * connIdPtr,
655 IxAtmNpeRxVcId * npeVcIdPtr );
656
657/**
658 *
659 * @ingroup IxAtmdAccAPI
660 *
661 * @fn ixAtmdAccRxVcFreeReplenish (IxAtmConnId connId,
662 IX_OSAL_MBUF * mbufPtr)
663 *
664 * @brief Provide free mbufs for data reception on a connection.
665 *
666 * This function provides mbufs for data reception by the hardware. This
667 * function needs to be called by the user on a regular basis to ensure
668 * no packet loss. Providing free buffers is a connection-based feature;
669 * each connection can have different requirements in terms of buffer size
670 * number of buffers, recycling rate. This function could be invoked from
671 * within the context of a @a IxAtmdAccRxVcFreeLowCallback() callback
672 * for a particular VC
673 *
674 * Mbufs provided through this function call can be chained. They will be
675 * unchained internally. A call to this function with chained mbufs or
676 * multiple calls with unchained mbufs are equivalent, but calls with
677 * unchained mbufs are more efficients.
678 *
679 * Mbufs provided to this interface need to be able to hold at least one
680 * full cell payload (48/52 bytes, depending on service type).
681 * Chained buffers with a size less than the size supported by the hardware
682 * will be returned through the rx callback provided during the connect step.
683 *
684 * Failing to invoke this function prior to enabling the RX traffic
685 * can result in packet loss.
686 *
687 * This function is not reentrant for the same connId.
688 *
689 * This function does not use system resources and can be
690 * invoked from an interrupt context.
691 *
692 * @note - Over replenish is detected, and extra mbufs are returned through
693 * the rx callback provided during the connect step.
694 *
695 * @note - Mbuf provided to the replenish function should have a length greater or
696 * equal to 48/52 bytes according to service type.
697 *
698 * @note - The memory cache of mMbuf payload should be invalidated prior to Mbuf
699 * submission. Flushing the Mbuf headers is handled by IxAtmdAcc.
700 *
701 * @note - When a chained mbuf is provided, this function process the mbufs
702 * up to the hardware limit and invokes the user-supplied callback
703 * to release extra buffers.
704 *
705 * @sa ixAtmdAccRxVcFreeLowCallbackRegister
706 * @sa IxAtmdAccRxVcFreeLowCallback
707 * @sa ixAtmdAccRxVcConnect
708 *
709 * @param connId @ref IxAtmConnId [in] - connection Id as returned from a succesfull call to
710 * @a IxAtmdAccRxVcConnect()
711 * @param mbufPtr @ref IX_OSAL_MBUF [in] - pointer to a mbuf structure to be used for data
712 * reception. The mbuf pointed to by this parameter can be chained
713 * to an other mbuf.
714 *
715 * @return @li IX_SUCCESS successful call to @a ixAtmdAccRxVcFreeReplenish()
716 * and the mbuf is now ready to use for incoming traffic.
717 * @return @li IX_ATMDACC_BUSY cannot process this request because
718 * the max number of outstanding free buffers has been reached
719 * or the internal resources have exhausted for this VC.
720 * The user is responsible for retrying this request later.
721 * @return @li IX_FAIL cannot process this request because of parameter
722 * errors or some unspecified internal error has occurred.
723 *
724 * @note - It is not always guaranteed the replenish step to be as fast as the
725 * hardware is consuming Rx Free mbufs. There is nothing in IxAtmdAcc to
726 * guarantee that replenish reaches the rxFree threshold level. If the
727 * threshold level is not reached, the next rxFree low notification for
728 * this channel will not be triggered.
729 * The preferred ways to replenish can be as follows (depending on
730 * applications and implementations) :
731 * @li Replenish in a rxFree low notification until the function
732 * ixAtmdAccRxVcFreeReplenish() returns IX_ATMDACC_BUSY
733 * @li Query the queue level using @sa ixAtmdAccRxVcFreeEntriesQuery, then
734 * , replenish using @a ixAtmdAccRxVcFreeReplenish(), then query the queue
735 * level again, and replenish if the threshold is still not reached.
736 * @li Trigger replenish from an other event source and use rxFree starvation
737 * to throttle the Rx traffic.
738 *
739 */
740PUBLIC IX_STATUS ixAtmdAccRxVcFreeReplenish (IxAtmConnId connId,
741 IX_OSAL_MBUF * mbufPtr);
742
743/**
744 *
745 * @ingroup IxAtmdAccAPI
746 *
747 * @fn ixAtmdAccRxVcFreeLowCallbackRegister (IxAtmConnId connId,
748 unsigned int numberOfMbufs,
749 IxAtmdAccRxVcFreeLowCallback callback)
750 *
751 * @brief Configure the RX Free threshold value and register a callback
752 * to handle threshold notifications.
753 *
754 * The function ixAtmdAccRxVcFreeLowCallbackRegister sets the threshold value for
755 * a particular RX VC. When the number of buffers reaches this threshold
756 * the callback is invoked.
757 *
758 * This function should be called once per VC before RX traffic is
759 * enabled.This function will fail if the curent level of the free buffers
760 * is equal or less than the threshold value.
761 *
762 * @sa ixAtmdAccRxVcFreeLowCallbackRegister
763 * @sa IxAtmdAccRxVcFreeLowCallback
764 * @sa ixAtmdAccRxVcFreeReplenish
765 * @sa ixAtmdAccRxVcFreeEntriesQuery
766 * @sa ixAtmdAccRxVcConnect
767 *
768 * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call
769 * to @a IxAtmdAccRxVcConnect()
770 * @param numberOfMbufs unsigned int [in] - threshold number of buffers. This number
771 * has to be a power of 2, one of the values 0,1,2,4,8,16,32....
772 * The maximum value cannot be more than half of the rxFree queue
773 * size (which can be retrieved using @a ixAtmdAccRxVcFreeEntriesQuery()
774 * before any use of the @a ixAtmdAccRxVcFreeReplenish() function)
775 * @param callback @ref IxAtmdAccRxVcFreeLowCallback [in] - function telling the user that the number of
776 * free buffers has reduced to the threshold value.
777 *
778 * @return @li IX_SUCCESS Threshold set successfully.
779 * @return @li IX_FAIL parameter error or the current number of free buffers
780 * is less than or equal to the threshold supplied or some
781 * unspecified error has occrred.
782 *
783 * @note - the callback will be called when the threshold level will drop from
784 * exactly (numberOfMbufs + 1) to (numberOfMbufs).
785 *
786 */
787PUBLIC IX_STATUS ixAtmdAccRxVcFreeLowCallbackRegister (IxAtmConnId connId,
788 unsigned int numberOfMbufs,
789 IxAtmdAccRxVcFreeLowCallback callback);
790
791/**
792 *
793 * @ingroup IxAtmdAccAPI
794 *
795 * @fn ixAtmdAccRxVcFreeEntriesQuery (IxAtmConnId connId,
796 unsigned int *numberOfMbufsPtr)
797 *
798 * @brief Get the number of rx mbufs the system can accept to replenish the
799 * the rx reception mechanism on a particular channel
800 *
801 * The ixAtmdAccRxVcFreeEntriesQuery function is used to retrieve the current
802 * number of available mbuf entries for reception, on a per-VC basis. This
803 * function can be used to know the number of mbufs which can be provided
804 * using @a ixAtmdAccRxVcFreeReplenish().
805 *
806 * This function can be used from a timer context, or can be associated
807 * with a threshold event, or can be used inside an active polling
808 * mechanism which is under user control.
809 *
810 * This function is reentrant and does not use system resources and can
811 * be invoked from an interrupt context.
812 *
813 * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call
814 * to @a IxAtmdAccRxVcConnect()
815 * @param numberOfMbufsPtr unsigned int [out] - Pointer to the number of available entries.
816 * . This parameter cannot be a null pointer.
817 *
818 * @return @li IX_SUCCESS the current number of mbufs not yet used for incoming traffic
819 * @return @li IX_FAIL invalid parameter
820 *
821 * @sa ixAtmdAccRxVcFreeReplenish
822 *
823 */
824PUBLIC IX_STATUS ixAtmdAccRxVcFreeEntriesQuery (IxAtmConnId connId,
825 unsigned int *numberOfMbufsPtr);
826
827/**
828 *
829 * @ingroup IxAtmdAccAPI
830 *
831 * @fn ixAtmdAccRxVcEnable (IxAtmConnId connId)
832 *
833 * @brief Start the RX service on a VC.
834 *
835 * This functions kicks-off the traffic reception for a particular VC.
836 * Once invoked, incoming PDUs will be made available by the hardware
837 * and are eventually directed to the @a IxAtmdAccRxVcRxCallback() callback
838 * registered for the connection.
839 *
840 * If the traffic is already running, this function returns IX_SUCCESS.
841 * This function can be invoked many times.
842 *
843 * IxAtmdAccRxVcFreeLowCallback event will occur only after
844 * @a ixAtmdAccRxVcEnable() function is invoked.
845 *
846 * Before using this function, the @a ixAtmdAccRxVcFreeReplenish() function
847 * has to be used to replenish the RX Free queue. If not, incoming traffic
848 * may be discarded.and in the case of interrupt driven reception the
849 * @a IxAtmdAccRxVcFreeLowCallback() callback may be invoked as a side effect
850 * during a replenish action.
851 *
852 * This function is not reentrant and should not be used inside an
853 * interrupt context.
854 *
855 * For an VC connection this function can be called after a call to
856 * @a ixAtmdAccRxVcDisable() and should not be called after
857 * @a ixAtmdAccRxVcTryDisconnect()
858 *
859 * @sa ixAtmdAccRxVcDisable
860 * @sa ixAtmdAccRxVcConnect
861 * @sa ixAtmdAccRxVcFreeReplenish
862 *
863 * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call
864 * to @a IxAtmdAccRxVcConnect()
865 *
866 * @return @li IX_SUCCESS successful call to ixAtmdAccRxVcEnable
867 * @return @li IX_ATMDACC_WARNING the channel is already enabled
868 * @return @li IX_FAIL invalid parameters or some unspecified internal
869 * error occured.
870 *
871 */
872PUBLIC IX_STATUS ixAtmdAccRxVcEnable (IxAtmConnId connId);
873
874/**
875 *
876 * @ingroup IxAtmdAccAPI
877 *
878 * @fn ixAtmdAccRxVcDisable (IxAtmConnId connId)
879 *
880 * @brief Stop the RX service on a VC.
881 *
882 * This functions stops the traffic reception for a particular VC connection.
883 *
884 * Once invoked, incoming Pdus are discarded by the hardware. Any Pdus
885 * pending will be freed to the user
886 *
887 * Hence once this function returns no more receive callbacks will be
888 * called for that VC. However, buffer free callbacks will be invoked
889 * until such time as all buffers supplied by the user have been freed
890 * back to the user
891 *
892 * Calling this function doe not invalidate the connId.
893 * @a ixAtmdAccRxVcEnable() can be invoked to enable Pdu reception again.
894 *
895 * If the traffic is already stopped, this function returns IX_SUCCESS.
896 *
897 * This function is not reentrant and should not be used inside an
898 * interrupt context.
899 *
900 * @sa ixAtmdAccRxVcConnect
901 * @sa ixAtmdAccRxVcEnable
902 * @sa ixAtmdAccRxVcDisable
903 *
904 * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call to @a
905 * IxAtmdAccRxVcConnect()
906 *
907 * @return @li IX_SUCCESS successful call to @a ixAtmdAccRxVcDisable().
908 * @return @li IX_ATMDACC_WARNING the channel is already disabled
909 * @return @li IX_FAIL invalid parameters or some unspecified internal error occured
910 *
911 */
912PUBLIC IX_STATUS ixAtmdAccRxVcDisable (IxAtmConnId connId);
913
914/**
915 *
916 * @ingroup IxAtmdAccAPI
917 *
918 * @fn ixAtmdAccRxVcTryDisconnect (IxAtmConnId connId)
919 *
920 * @brief Disconnect a VC from the RX service.
921 *
922 * This function deregisters the VC and guarantees that all resources
923 * associated with this VC are free. After its execution, the connection
924 * Id is not available.
925 *
926 * This function will fail until such time as all resources allocated to
927 * the VC connection have been freed. The user is responsible to delay and
928 * call again this function many times until a success status is returned.
929 *
930 * This function needs internal locks and should not be called from an
931 * interrupt context
932 *
933 * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call to
934 * @a IxAtmdAccRxVcConnect()
935 *
936 * @return @li IX_SUCCESS successful call to ixAtmdAccRxVcDisable
937 * @return @li IX_ATMDACC_RESOURCES_STILL_ALLOCATED not all resources
938 * associated with the connection have been freed.
939 * @return @li IX_FAIL cannot process this request because of a parameter
940 * error
941 *
942 */
943PUBLIC IX_STATUS ixAtmdAccRxVcTryDisconnect (IxAtmConnId connId);
944
945/* ------------------------------------------------------
946 Part of the IxAtmdAcc interface related to TX traffic
947 ------------------------------------------------------ */
948
949/**
950 *
951 * @ingroup IxAtmdAccAPI
952 *
953 * @fn ixAtmdAccTxVcConnect (IxAtmLogicalPort port,
954 unsigned int vpi,
955 unsigned int vci,
956 IxAtmdAccAalType aalServiceType,
957 IxAtmdAccUserId userId,
958 IxAtmdAccTxVcBufferReturnCallback bufferFreeCallback,
959 IxAtmConnId * connIdPtr)
960 *
961 * @brief Connect to a Aal Pdu transmit service for a particular
962 * port/vpi/vci and service type.
963 *
964 * This function allows a user to connect to an Aal5/Aal0/OAM Pdu transmit service
965 * for a particular port/vpi/vci. It registers the callback and allocates
966 * internal resources and a Connection Id to be used in further API calls
967 * related to this VC.
968 *
969 * The function will setup VC transmit service on the specified on the
970 * specified port. A connId is the reference by which IxAtmdAcc refers to a
971 * connected VC. This identifier is the result of a succesful call
972 * to a connect function. This identifier is invalid after a
973 * sucessful call to a disconnect function.
974 *
975 * This function needs internal locks, and hence should not be called
976 * from an interrupt context.
977 *
978 * On return from @a ixAtmdAccTxVcConnect() with a failure status, the
979 * connection Id parameter is unspecified. Its value cannot be used.
980 *
981 * Calling this function for the same combination of port, Vpi, Vci and
982 * more than once without calling @a ixAtmdAccTxVcTryDisconnect() will result
983 * in a failure status.
984 *
985 * Two AAL0 services supporting 48 or 52 byte cell data are provided.
986 * Submitted AAL0 PDUs must be a multiple of the cell data size (48/52).
987 * AAL0_52 is a raw cell service the client must format
988 * the PDU with an ATM cell header (excluding HEC) at the start of
989 * each cell, note that AtmdAcc does not validate the cell headers in
990 * a submitted PDU.
991 *
992 * For the OAM service an "OAM Tx channel" may be enabled for a port
993 * by establishing a single dedicated OAM Tx connection on that port.
994 *
995 * The OAM service allows buffers containing 52 byte OAM F4/F5 cells
996 * to be transmitted and received over the dedicated OAM channels.
997 * HEC is appended/removed, and CRC-10 performed by the NPE. The OAM
998 * service offered by AtmdAcc is a raw cell transport service.
999 * It is assumed that ITU I.610 procedures that make use of this
1000 * service are implemented above AtmdAcc.
1001 *
1002 * Note that the dedicated OAM connections are established on
1003 * reserved VPI,VCI, and (in the case of Rx) port values.
1004 * These values are used purely to descriminate the dedicated OAM channels
1005 * and do not identify a particular OAM F4/F5 flow. F4/F5 flows may be
1006 * realised for particluar VPI/VCIs by manipulating the VPI,VCI
1007 * fields of the ATM cell headers of cells in the buffers passed
1008 * to AtmdAcc.
1009 *
1010 * Calling this function before enabling the port will fail.
1011 *
1012 * @sa ixAtmdAccTxVcTryDisconnect
1013 * @sa ixAtmdAccPortTxScheduledModeEnable
1014 * @sa ixAtmdAccPortEnable
1015 *
1016 * @param port @ref IxAtmLogicalPort [in] - VC identification : logical PHY port
1017 * [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
1018 * @param vpi unsigned int [in] - VC identification : ATM Vpi [0..255] or IX_ATMDACC_OAM_VPI
1019 * @param vci unsigned int [in] - VC identification : ATM Vci [0..65535] or IX_ATMDACC_OAM_VCI
1020 * @param aalServiceType @ref IxAtmdAccAalType [in] - type of service AAL5, AAL0_48, AAL0_52, or OAM
1021 * @param userId @ref IxAtmdAccUserId [in] - user id to be used later during callbacks related
1022 * to this channel
1023 * @param bufferFreeCallback @ref IxAtmdAccTxVcBufferReturnCallback [in] - function called when mbufs
1024 * transmission is complete. This parameter cannot be a null
1025 * pointer.
1026 * @param connIdPtr @ref IxAtmConnId [out] - Pointer to a connection Id.
1027 * This parameter cannot be a null pointer.
1028 *
1029 * @return @li IX_SUCCESS successful call to @a IxAtmdAccRxVcConnect().
1030 * @return @li IX_ATMDACC_BUSY cannot process this request
1031 * because no VC is available
1032 * @return @li IX_FAIL
1033 * parameter error,
1034 * VC already in use,
1035 * attempt to connect AAL service on reserved OAM VPI/VCI,
1036 * attempt to connect OAM service on VPI/VCI other than the reserved OAM VPI/VCI,
1037 * port is not initialised,
1038 * or some other error occurs during processing.
1039 *
1040 * @note - Unscheduled mode is not supported in ixp425 1.0. Therefore, the
1041 * function @a ixAtmdAccPortTxScheduledModeEnable() need to be called
1042 * for this port before any establishing a Tx Connection
1043 */
1044PUBLIC IX_STATUS ixAtmdAccTxVcConnect (IxAtmLogicalPort port,
1045 unsigned int vpi,
1046 unsigned int vci,
1047 IxAtmdAccAalType aalServiceType,
1048 IxAtmdAccUserId userId,
1049 IxAtmdAccTxVcBufferReturnCallback bufferFreeCallback,
1050 IxAtmConnId * connIdPtr);
1051
1052/**
1053 *
1054 * @ingroup IxAtmdAccAPI
1055 *
1056 * @fn ixAtmdAccTxVcPduSubmit (IxAtmConnId connId,
1057 IX_OSAL_MBUF * mbufPtr,
1058 IxAtmdAccClpStatus clp,
1059 unsigned int numberOfCells)
1060 *
1061 * @brief Submit a Pdu for transmission on connection.
1062 *
1063 * A data user calls this function to submit an mbufs containing a Pdu
1064 * to be transmitted. The buffer supplied can be chained and the Pdu it
1065 * contains must be complete.
1066 *
1067 * The transmission behavior of this call depends on the operational mode
1068 * of the port on which the connection is made.
1069 *
1070 * In unscheduled mode the mbuf will be submitted to the hardware
1071 * immediately if sufficent resource is available. Otherwise the function
1072 * will return failure.
1073 *
1074 * In scheduled mode the buffer is queued internally in IxAtmdAcc. The cell
1075 * demand is made known to the traffic shaping entity. Cells from the
1076 * buffers are MUXed onto the port some time later as dictated by the
1077 * traffic shaping entity. The traffic shaping entity does this by sending
1078 * transmit schedules to IxAtmdAcc via @a ixAtmdAccPortTxProcess() function call.
1079 *
1080 * Note that the dedicated OAM channel is scheduled just like any
1081 * other channel. This means that any OAM traffic relating to an
1082 * active AAL0/AAL5 connection will be scheduled independantly of the
1083 * AAL0/AAL5 traffic for that connection.
1084 *
1085 * When transmission is complete, the TX Done mechanism will give the
1086 * owmnership of these buffers back to the customer. The tx done mechanism
1087 * must be in operation before transmission is attempted.
1088 *
1089 * For AAL0/OAM submitted AAL0 PDUs must be a multiple of the cell data
1090 * size (48/52). AAL0_52 and OAM are raw cell services, and the client
1091 * must format the PDU with an ATM cell header (excluding HEC) at the
1092 * start of each cell, note that AtmdAcc does not validate the cell headers in
1093 * a submitted PDU.
1094 *
1095 *
1096 * @sa IxAtmdAccTxVcBufferReturnCallback
1097 * @sa ixAtmdAccTxDoneDispatch
1098 *
1099 * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call to
1100 * @a ixAtmdAccTxVcConnect()
1101 * @param mbufPtr @ref IX_OSAL_MBUF [in] - pointer to a chained structure of mbufs to transmit.
1102 * This parameter cannot be a null pointer.
1103 * @param clp @ref IxAtmdAccClpStatus [in] - clp indication for this PDU. All cells of this pdu
1104 * will be sent with the clp bit set
1105 * @param numberOfCells unsigned int [in] - number of cells in the PDU.
1106 *
1107 * @return @li IX_SUCCESS successful call to @a ixAtmdAccTxVcPduSubmit()
1108 * The pdu pointed by the mbufPtr parameter will be
1109 * transmitted
1110 * @return @li IX_ATMDACC_BUSY unable to process this request because
1111 * internal resources are all used. The caller is responsible
1112 * for retrying this request later.
1113 * @return @li IX_FAIL unable to process this request because of error
1114 * in the parameters (wrong connId supplied,
1115 * or wrong mbuf pointer supplied), the total length of all buffers
1116 * in the chain should be a multiple of the cell size
1117 * ( 48/52 depending on the service type ),
1118 * or unspecified error during processing
1119 *
1120 * @note - This function in not re-entrant for the same VC (e.g. : two
1121 * thread cannot send PDUs for the same VC). But two threads can
1122 * safely call this function with a different connection Id
1123 *
1124 * @note - In unscheduled mode, this function is not re-entrant on a per
1125 * port basis. The size of pdus is limited to 8Kb.
1126 *
1127 * @note - 0-length mbufs should be removed from the chain before submission.
1128 * The total length of the pdu (sdu + padding +trailer) has to be
1129 * updated in the header of the first mbuf of a chain of mbufs.
1130 *
1131 * @note - Aal5 trailer information (UUI, CPI, SDU length) has to be supplied
1132 * before submission.
1133 *
1134 * @note - The payload memory cache should be flushed, if needed, prior to
1135 * transmission. Mbuf headers are flushed by IxAtmdAcc
1136 *
1137 * @note - This function does not use system resources and can be used
1138 * inside an interrupt context
1139 */
1140PUBLIC IX_STATUS ixAtmdAccTxVcPduSubmit (IxAtmConnId connId,
1141 IX_OSAL_MBUF * mbufPtr,
1142 IxAtmdAccClpStatus clp,
1143 unsigned int numberOfCells);
1144
1145/**
1146 *
1147 * @ingroup IxAtmdAccAPI
1148 *
1149 * @fn ixAtmdAccTxVcTryDisconnect (IxAtmConnId connId)
1150 *
1151 * @brief Disconnect from a Aal Pdu transmit service for a particular
1152 * port/vpi/vci.
1153 *
1154 * This function deregisters the VC and guarantees that all resources
1155 * associated with this VC are free. After its execution, the connection
1156 * Id is not available.
1157 *
1158 * This function will fail until such time as all resources allocated to
1159 * the VC connection have been freed. The user is responsible to delay
1160 * and call again this function many times until a success status is
1161 * returned.
1162 *
1163 * After its execution, the connection Id is not available.
1164 *
1165 * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call to
1166 * @a ixAtmdAccTxVcConnect()
1167 *
1168 * @return @li IX_SUCCESS successful call to @a ixAtmdAccTxVcTryDisconnect()
1169 * @return @li IX_ATMDACC_RESOURCES_STILL_ALLOCATED not all resources
1170 * associated with the connection have been freed. This condition will
1171 * disappear after Tx and TxDone is complete for this channel.
1172 * @return @li IX_FAIL unable to process this request because of errors
1173 * in the parameters (wrong connId supplied)
1174 *
1175 * @note - This function needs internal locks and should not be called
1176 * from an interrupt context
1177 *
1178 * @note - If the @a IX_ATMDACC_RESOURCES_STILL_ALLOCATED error does not
1179 * clear after a while, this may be linked to a previous problem
1180 * of cell overscheduling. Diabling the port and retry a disconnect
1181 * will free the resources associated with this channel.
1182 *
1183 * @sa ixAtmdAccPortTxProcess
1184 *
1185 */
1186PUBLIC IX_STATUS ixAtmdAccTxVcTryDisconnect (IxAtmConnId connId);
1187
1188#endif /* IXATMDACC_H */
1189
1190/**
1191 * @} defgroup IxAtmdAccAPI
1192 */
1193
1194