blob: ee939bf2414e925a0a277e6fb61e90b550829b96 [file] [log] [blame]
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +02001/*
2 * (C) Copyright 2000-2004
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 */
25
26#include <config.h>
27#include <common.h>
28#include <mpc8xx.h>
29#include "pld.h"
Markus Klotzbuecherd28707d2007-01-09 14:57:10 +010030#include "hpi.h"
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +020031
32#define _NOT_USED_ 0xFFFFFFFF
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +020033
34static long int dram_size (long int, long int *, long int);
35
36const uint sdram_table[] = {
37 /*
38 * Single Read. (Offset 0 in UPMB RAM)
39 */
40 0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
41 0x1FF77C47, /* last */
42 /*
43 * SDRAM Initialization (offset 5 in UPMB RAM)
44 *
45 * This is no UPM entry point. The following definition uses
46 * the remaining space to establish an initialization
47 * sequence, which is executed by a RUN command.
48 *
49 */
50 0x1FF77C34, 0xEFEABC34, 0x1FB57C35, /* last */
51 /*
52 * Burst Read. (Offset 8 in UPMB RAM)
53 */
54 0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
55 0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
56 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
57 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
58 /*
59 * Single Write. (Offset 18 in UPMB RAM)
60 */
61 0x1F07FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
62 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
63 /*
64 * Burst Write. (Offset 20 in UPMB RAM)
65 */
66 0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
67 0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
68 _NOT_USED_,
69 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
70 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
71 /*
72 * Refresh (Offset 30 in UPMB RAM)
73 */
74 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
75 0xFFFFFC84, 0xFFFFFC07, /* last */
76 _NOT_USED_, _NOT_USED_,
77 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
78 /*
79 * Exception. (Offset 3c in UPMB RAM)
80 */
81 0x7FFFFC07, /* last */
82 _NOT_USED_, _NOT_USED_, _NOT_USED_,
83};
84
Becky Bruce9973e3c2008-06-09 16:03:40 -050085phys_size_t initdram (int board_type)
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +020086{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020087 volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +020088 volatile memctl8xx_t *memctl = &immr->im_memctl;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020089 /* volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE; */
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +020090
91 long int size_b0;
92 long int size8, size9;
93 int i;
94
95 /*
96 * Configure UPMB for SDRAM
97 */
98 upmconfig (UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
99
100 udelay(100);
101
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200102 memctl->memc_mptpr = CONFIG_SYS_MPTPR;
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200103
104 /* burst length=4, burst type=sequential, CAS latency=2 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200105 memctl->memc_mar = CONFIG_SYS_MAR;
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200106
107 /*
108 * Map controller bank 1 to the SDRAM bank at preliminary address.
109 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200110 memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
111 memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200112
113 /* initialize memory address register */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200114 memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL; /* refresh not enabled yet */
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200115
116 /* mode initialization (offset 5) */
117 udelay (200); /* 0x80006105 */
118 memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS1 | MCR_MLCF (1) | MCR_MAD (0x05);
119
120 /* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */
121 udelay (1); /* 0x80006130 */
122 memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS1 | MCR_MLCF (1) | MCR_MAD (0x30);
123 udelay (1); /* 0x80006130 */
124 memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS1 | MCR_MLCF (1) | MCR_MAD (0x30);
125 udelay (1); /* 0x80006106 */
126 memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS1 | MCR_MLCF (1) | MCR_MAD (0x06);
127
128 memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */
129
130 udelay (200);
131
132 /* Need at least 10 DRAM accesses to stabilize */
133 for (i = 0; i < 10; ++i) {
134 volatile unsigned long *addr =
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200135 (volatile unsigned long *) CONFIG_SYS_SDRAM_BASE;
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200136 unsigned long val;
137
138 val = *(addr + i);
139 *(addr + i) = val;
140 }
141
142 /*
143 * Check Bank 0 Memory Size for re-configuration
144 *
145 * try 8 column mode
146 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200147 size8 = dram_size (CONFIG_SYS_MBMR_8COL, (long *)CONFIG_SYS_SDRAM_BASE, SDRAM_MAX_SIZE);
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200148
149 udelay (1000);
150
151 /*
152 * try 9 column mode
153 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200154 size9 = dram_size (CONFIG_SYS_MBMR_9COL, (long *)CONFIG_SYS_SDRAM_BASE, SDRAM_MAX_SIZE);
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200155
156 if (size8 < size9) { /* leave configuration at 9 columns */
157 size_b0 = size9;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200158 memctl->memc_mbmr = CONFIG_SYS_MBMR_9COL | MBMR_PTBE;
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200159 udelay (500);
160 } else { /* back to 8 columns */
161 size_b0 = size8;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200162 memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL | MBMR_PTBE;
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200163 udelay (500);
164 }
165
166 /*
167 * Final mapping:
168 */
169
170 memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) |
171 OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200172 memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V;
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200173 udelay (1000);
174
Markus Klotzbuecherd28707d2007-01-09 14:57:10 +0100175 /* initalize the DSP Host Port Interface */
176 hpi_init();
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200177
Markus Klotzbuecher67fea022007-01-09 16:02:48 +0100178 /* FRAM Setup */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200179 memctl->memc_or4 = CONFIG_SYS_OR4;
180 memctl->memc_br4 = CONFIG_SYS_BR4;
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200181 udelay(1000);
182
183 return (size_b0);
184}
185
186/*
187 * Check memory range for valid RAM. A simple memory test determines
188 * the actually available RAM size between addresses `base' and
189 * `base + maxsize'. Some (not all) hardware errors are detected:
190 * - short between address lines
191 * - short between data lines
192 */
193static long int dram_size (long int mbmr_value, long int *base,
194 long int maxsize)
195{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200196 volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200197 volatile memctl8xx_t *memctl = &immap->im_memctl;
198
199 memctl->memc_mbmr = mbmr_value;
200
201 return (get_ram_size (base, maxsize));
202}
203
204
205/************* other stuff ******************/
206
207
208int board_early_init_f(void)
209{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200210 volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200211
Markus Klotzbuechere4c2d372007-01-09 14:57:12 +0100212 /* Set Go/NoGo led (PA15) to color red */
213 immap->im_ioport.iop_papar &= ~0x1;
214 immap->im_ioport.iop_paodr &= ~0x1;
215 immap->im_ioport.iop_padir |= 0x1;
216 immap->im_ioport.iop_padat |= 0x1;
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200217
Markus Klotzbuechere4c2d372007-01-09 14:57:12 +0100218#if 0
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200219 /* Turn on LED PD9 */
220 immap->im_ioport.iop_pdpar &= ~(0x0040);
221 immap->im_ioport.iop_pddir |= 0x0040;
222 immap->im_ioport.iop_pddat |= 0x0040;
Markus Klotzbuechere4c2d372007-01-09 14:57:12 +0100223#endif
224
Markus Klotzbuecher5921e532007-01-09 14:57:13 +0100225 /*
226 * Enable console on SMC1. This requires turning on
227 * the com2_en signal and SMC1_DISABLE
228 */
229
230 /* SMC1_DISABLE: PB17 */
231 immap->im_cpm.cp_pbodr &= ~0x4000;
232 immap->im_cpm.cp_pbpar &= ~0x4000;
233 immap->im_cpm.cp_pbdir |= 0x4000;
234 immap->im_cpm.cp_pbdat &= ~0x4000;
235
236 /* COM2_EN: PD10 */
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200237 immap->im_ioport.iop_pdpar &= ~0x0020;
238 immap->im_ioport.iop_pddir &= ~0x4000;
239 immap->im_ioport.iop_pddir |= 0x0020;
240 immap->im_ioport.iop_pddat |= 0x0020;
241
242
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200243#ifdef CONFIG_SYS_SMC1_PLD_CLK4 /* SMC1 uses CLK4 from PLD */
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200244 immap->im_cpm.cp_simode |= 0x7000;
245 immap->im_cpm.cp_simode &= ~(0x8000);
246#endif
247
248 return 0;
249}
250
Markus Klotzbuecherd28707d2007-01-09 14:57:10 +0100251int last_stage_init(void)
252{
253#ifdef CONFIG_SPC1920_HPI_TEST
254 printf("CMB1920 Host Port Interface Test: %s\n",
255 hpi_test() ? "Failed!" : "OK");
256#endif
257 return 0;
258}
Markus Klotzbuecherb02d0172006-07-12 08:48:24 +0200259
260int checkboard (void)
261{
262 puts("Board: SPC1920\n");
263 return 0;
264}