blob: 7ddde8cb7118382787dabbb83382b2cb0ebb6b90 [file] [log] [blame]
Stefan Roese01e62c72016-05-17 15:04:16 +02001/*
2 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#ifndef _CONFIG_MVEBU_DB_88F3720_H
8#define _CONFIG_MVEBU_DB_88F3720_H
9
10/*
11 * High Level Configuration Options (easy to change)
12 */
13#define CONFIG_DISPLAY_BOARDINFO_LATE
14#define CONFIG_ARCH_EARLY_INIT_R
15
16#define CONFIG_SYS_TEXT_BASE 0x00000000
17
18/* additions for new ARM relocation support */
19#define CONFIG_SYS_SDRAM_BASE 0x00000000
20
21#define CONFIG_NR_DRAM_BANKS 1
22
23/* auto boot */
24#define CONFIG_PREBOOT
25
26#define CONFIG_BAUDRATE 115200
27#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
28 115200, 230400, 460800, 921600 }
29
30/*
31 * For booting Linux, the board info and command line data
32 * have to be in the first 8 MB of memory, since this is
33 * the maximum mapped by the Linux kernel during initialization.
34 */
35#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
36#define CONFIG_INITRD_TAG /* enable INITRD tag */
37#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
38
39#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
40#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
41 +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */
42
43/*
44 * Size of malloc() pool
45 */
46#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
47
48/*
49 * Other required minimal configurations
50 */
51#define CONFIG_SYS_LONGHELP
52#define CONFIG_AUTO_COMPLETE
53#define CONFIG_CMDLINE_EDITING
Stefan Roese01e62c72016-05-17 15:04:16 +020054#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
55#define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */
56#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
57#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
58#define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */
59#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
60#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
61
Stefan Roese01e62c72016-05-17 15:04:16 +020062#define CONFIG_SYS_ALT_MEMTEST
63
64/* End of 16M scrubbed by training in bootrom */
65#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
66
67/*
68 * I2C
69 */
70#define CONFIG_I2C_MV
71#define CONFIG_SYS_I2C_SLAVE 0x0
72
73/*
74 * SPI Flash configuration
75 */
76#define CONFIG_ENV_SPI_BUS 0
77#define CONFIG_ENV_SPI_CS 0
78
79/* SPI NOR flash default params, used by sf commands */
80#define CONFIG_SF_DEFAULT_SPEED 1000000
81#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
82#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
83
84/* Environment in SPI NOR flash */
85#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
86#define CONFIG_ENV_IS_IN_SPI_FLASH
87#define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */
88#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
89#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
90
91/*
92 * Ethernet Driver configuration
93 */
94#define CONFIG_MVNETA /* Enable Marvell Gbe Controller Driver */
95#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
96#define CONFIG_PHY_GIGE /* GbE speed/duplex detect */
97#define CONFIG_ARP_TIMEOUT 200
98#define CONFIG_NET_RETRY_COUNT 50
99
100/* USB 2.0 */
101#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
102
103/* USB 3.0 */
104#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3
105
106#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
107 CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)
108
109/* USB ethernet */
110#define CONFIG_USB_HOST_ETHER
111#define CONFIG_USB_ETHER_ASIX
112#define CONFIG_USB_ETHER_MCS7830
113#define CONFIG_USB_ETHER_RTL8152
114#define CONFIG_USB_ETHER_SMSC95XX
115
116/*
117 * SATA/SCSI/AHCI configuration
118 */
119#define CONFIG_SCSI
120#define CONFIG_SCSI_AHCI
121#define CONFIG_SCSI_AHCI_PLAT
122#define CONFIG_LIBATA
123#define CONFIG_LBA48
124#define CONFIG_SYS_64BIT_LBA
125
126#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
127#define CONFIG_SYS_SCSI_MAX_LUN 1
128#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
129 CONFIG_SYS_SCSI_MAX_LUN)
130
131#define CONFIG_SUPPORT_VFAT
132
133/* DISK Partition support */
134#define CONFIG_EFI_PARTITION
135#define CONFIG_DOS_PARTITION
136#define CONFIG_MAC_PARTITION
137#define CONFIG_ISO_PARTITION /* Experimental */
138
139#define CONFIG_CMD_PART
140#define CONFIG_PARTITION_UUIDS
141
142#endif /* _CONFIG_MVEBU_DB_88F3720_H */