blob: ab21998dc8364473f40159bec2ea673dc6a244fa [file] [log] [blame]
Neil Armstrongb72794e2018-09-05 15:57:11 +02001U-Boot for Amlogic S400
2=======================
3
4S400 is a reference board manufactured by Amlogic with the following
5specifications:
6
7 - Amlogic A113DX ARM Cortex-A53 quad-core SoC @ 1.2GHz
8 - 1GB DDR4 SDRAM
9 - 10/100 Ethernet
10 - 2 x USB 2.0 Host
11 - eMMC
12 - Infrared receiver
13 - SDIO WiFi Module
14 - MIPI DSI Connector
15 - Audio HAT Connector
16 - PCI-E M.2 Connectors
17
18Schematics are available from Amlogic on demand.
19
20Currently the u-boot port supports the following devices:
21 - serial
22 - eMMC
23 - Ethernet
24 - I2C
25 - Regulators
26 - Reset controller
27 - Clock controller
28 - USB Host
29 - ADC
30
31u-boot compilation
32==================
33
34 > export ARCH=arm
35 > export CROSS_COMPILE=aarch64-none-elf-
36 > make s400_defconfig
37 > make
38
39Image creation
40==============
41
42Amlogic doesn't provide sources for the firmware and for tools needed
43to create the bootloader image, so it is necessary to obtain them from
44the git tree published by the board vendor:
45
46 > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
47 > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
48 > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
49 > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
50 > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
51 > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot
52 > cd amlogic-u-boot
53 > make axg_s400_v1_defconfig
54 > make
55 > export FIPDIR=$PWD/fip
56
57Go back to mainline U-boot source tree then :
58 > mkdir fip
59
60 > cp $FIPDIR/axg/bl2.bin fip/
61 > cp $FIPDIR/axg/acs.bin fip/
62 > cp $FIPDIR/axg/bl21.bin fip/
63 > cp $FIPDIR/axg/bl30.bin fip/
64 > cp $FIPDIR/axg/bl301.bin fip/
65 > cp $FIPDIR/axg/bl31.img fip/
66 > cp u-boot.bin fip/bl33.bin
67
68 > $FIPDIR/blx_fix.sh \
69 fip/bl30.bin \
70 fip/zero_tmp \
71 fip/bl30_zero.bin \
72 fip/bl301.bin \
73 fip/bl301_zero.bin \
74 fip/bl30_new.bin \
75 bl30
76
77 > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
78
79 > $FIPDIR/blx_fix.sh \
80 fip/bl2_acs.bin \
81 fip/zero_tmp \
82 fip/bl2_zero.bin \
83 fip/bl21.bin \
84 fip/bl21_zero.bin \
85 fip/bl2_new.bin \
86 bl2
87
88 > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl30_new.bin \
89 --output fip/bl30_new.bin.enc \
90 --level v3 --type bl30
91 > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl31.img \
92 --output fip/bl31.img.enc \
93 --level v3 --type bl31
94 > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl33.bin --compress lz4 \
95 --output fip/bl33.bin.enc \
96 --level v3 --type bl33
97 > $FIPDIR/axg/aml_encrypt_axg --bl2sig --input fip/bl2_new.bin \
98 --output fip/bl2.n.bin.sig
99 > $FIPDIR/axg/aml_encrypt_axg --bootmk \
100 --output fip/u-boot.bin \
101 --bl2 fip/bl2.n.bin.sig \
102 --bl30 fip/bl30_new.bin.enc \
103 --bl31 fip/bl31.img.enc \
104 --bl33 fip/bl33.bin.enc --level v3
105
106and then write the image to SD with:
107
108 > DEV=/dev/your_sd_device
109 > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
110 > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444